This article presents a three-dimensional analysis of the impact of the angle of incidence of the magnetic field intensity on the electrical performance (series resistance, shunt resistance) of a bifacial polycrystall...This article presents a three-dimensional analysis of the impact of the angle of incidence of the magnetic field intensity on the electrical performance (series resistance, shunt resistance) of a bifacial polycrystalline silicon solar cell. The cell is illuminated simultaneously from both sides. The continuity equation for the excess minority carriers is solved at the emitter and at the depth of the base respectively. The analytical expressions for photocurrent density, photovoltage, series resistance and shunt resistance were deduced. Using these expressions, the values of the series and shunt resistances were extracted for different values of the angle of incidence of the magnetic field intensity. The study shows that as the angle of incidence increases, the slopes of the minority carrier density for the two modes of operation of the solar cell decrease. This is explained by a drop in the accumulation of carriers in the area close to the junction due to the fact that the Lorentz force is unable to drive the carriers towards the lateral surfaces due to the weak action of the magnetic field, which tends to cancel out as the incidence angle increases, and consequently a drop in the open circuit photovoltage. This, in turn, reduces the Lorentz force. These results predict that the p-n junction of the solar cell will not heat up. The study also showed a decrease in series resistance as the incidence angle of the magnetic field intensity increased from 0 rad to π/2 rad and an increase in shunt resistance as the incidence angle increased. His behaviour of the electrical parameters when the angle of incidence of the field from 0 rad to π/2 rad shows that the decreasing magnetic field vector tends to be collinear with the electron trajectory. This allows them to cross the junction and participate in the external current. The best orientation for the Lorentz force is zero, in which case the carriers can move easily towards the junction.展开更多
A high-yield and beam-stable neutron tube can be applied in many fields.It is of great significance to the optimal external magnetic field intensity of the cold-cathode Penning ion source(PIS)and precisely controls th...A high-yield and beam-stable neutron tube can be applied in many fields.It is of great significance to the optimal external magnetic field intensity of the cold-cathode Penning ion source(PIS)and precisely controls the movement of deuterium(D),tritium(T)ions and electrons in the source of the neutron tubes.A cold-cathode PIS is designed based on the solenoidal magnetic field to obtain better uniformity of the magnetic field and higher yield of the neutron tube.The degree of magnetic field uniformity among the magnetic block,double magnetic rings and solenoidal ion sources is compared using finite element simulation methods.Using drift diffusion approximation and a magnetic field coupling method,the plasma distribution of hydrogen and the relationship between plasma density and magnetic field intensity at 0.06 Pa pressure and a solenoid magnetic field are obtained.The results show that the solenoidal ion source has the most uniform magnetic field distribution.The optimum magnetic field strength of about 0.1 T is obtained in the ion source at an excitation voltage of 1 V.The maximum average number density of monatomic hydrogen ions(H+)is 1×108 m−3,and an ion-beam current of about 14.51μA is formed under the−5000 V extraction field.The study of the solenoidal magnetic field contributes to the understanding of the particle dynamics within the PIS and provides a reference for the further improvement of the source performance of the neutron tube in the future.展开更多
For the first time, we developed porous Pt-Ni alloying nanoparticles with predominant(111) facets under intense magnetic fields. Electrochemical analysis revealed that the Pt-Ni alloying nanoparticles obtained at 2 Te...For the first time, we developed porous Pt-Ni alloying nanoparticles with predominant(111) facets under intense magnetic fields. Electrochemical analysis revealed that the Pt-Ni alloying nanoparticles obtained at 2 Tesla exhibited a superior catalytic activity and durability for oxygen reduction reaction. This work demonstrated that the imposition of intense magnetic field could be considered as a new approach for developing efficient alloying electrocatalysts with preferential facets.展开更多
The effects of magnetic field intensity, roasting temperature and roasting time on digestion rate and settling performance of bauxite with different iron contents were investigated systematically. The results indicate...The effects of magnetic field intensity, roasting temperature and roasting time on digestion rate and settling performance of bauxite with different iron contents were investigated systematically. The results indicate that such magnetic treatment can profoundly change the microstructure and digestion performance of bauxite. For the two samples carrying different iron contents, phase transformation of the aluminum oxide phase proceeds faster in the high iron bauxite than the low one. The optimal pretreatment conditions of low iron bauxite are roasting temperature 550 ℃ and magnetic field intensity 6 T, while for high iron bauxite are 500 ℃ and 9 T. The digestion rate of alumina can reach 95% and 92% at digestion temperature of 190 ℃ and 250 ℃. The settling performances of roasted ore by intense magnetic field after digestion are enhanced through pretreatment.展开更多
This study presents the effect of the magnetic field with constant intensity on the pulsatile flow through a rigid tube. Basing on the experimental results, the influence of the magnetic field on the blood viscosity i...This study presents the effect of the magnetic field with constant intensity on the pulsatile flow through a rigid tube. Basing on the experimental results, the influence of the magnetic field on the blood viscosity is considered The analytic solution of the pulsatile flow through a rigid tube under constant magnetic field intensitier and the effect of the magnetic field on the velocity distribution, flow and impedance in a rigid tube are given. this investigation is valuable for understanding the influence of the magnetic field on the blood circulation.展开更多
We used the Jordan-Wigner transform and the invariant eigenoperator method to study the magnetic phase diagram and the magnetization curve of the spin-1/2 alternating ferrimagnetic diamond chain in an external magneti...We used the Jordan-Wigner transform and the invariant eigenoperator method to study the magnetic phase diagram and the magnetization curve of the spin-1/2 alternating ferrimagnetic diamond chain in an external magnetic field at finite temperature.The magnetization versus external magnetic field curve exhibits a 1/3 magnetization plateau at absolute zero and finite temperatures,and the width of the 1/3 magnetization plateau was modulated by tuning the temperature and the exchange interactions.Three critical magnetic field intensities H_(CB),H_(CE)and H_(CS) were obtained,in which the H_(CB) and H_(CE)correspond to the appearance and disappearance of the 1/3 magnetization plateau,respectively,and the higher H_(CS) correspond to the appearance of fully polarized magnetization plateau of the system.The energies of elementary excitation hω_(σ,k)(σ=1,2,3)present the extrema of zero at the three critical magnetic fields at 0 K,i.e.,[hω_(3,k)(H_(CB)]_(min)=0,[hω_(2,k)(H_(CE)]_(max)=0 and[hω_(2,k)(H_(CS)]_(min)=0,and the magnetic phase diagram of magnetic field versus different exchange interactions at 0 K was established by the above relationships.According to the relationships between the system’s magnetization curve at finite temperatures and the critical magnetic field intensities,the magnetic field-temperature phase diagram was drawn.It was observed that if the magnetic phase diagram shows a three-phase critical point,which is intersected by the ferrimagnetic phase,the ferrimagnetic plateau phase,and the Luttinger liquid phase,the disappearance of the 1/3 magnetization plateau would inevitably occur.However,the 1/3 magnetization plateau would not disappear without the three-phase critical point.The appearance of the 1/3 magnetization plateau in the low temperature region is the macroscopic manifestations of quantum effect.展开更多
This paper investigates the changes of phase and apparent morphology under the combined effects of an intense magnetic field and temperature field.The effect of different roasting conditions on the digestion performan...This paper investigates the changes of phase and apparent morphology under the combined effects of an intense magnetic field and temperature field.The effect of different roasting conditions on the digestion performance of roasted ore is also studied.The results indicate that roasting pretreatment under high magnetic fields can change the microstructure and digestion performance of bauxite.The Al phase changed faster of high iron bauxite than that of low iron bauxite.The digestion performance of low iron bauxite improved significantly through roasting pretreatment in intense magnetic field. But the digestion performance of bauxite get worse with the iron content in bauxite increase,because the high iron content of bauxite lead the shielding effect of magnetic field and make the crystal structure of bauxite stably,the surface area or low iron bauxite increased obviously during pretreatment.The optimal pretreatment condition of low iron bauxite is roasting temperature of 550℃,roasting time of 60min and magnetic field intensity of 6T,while for the high iron is roasting temperature of 500℃,roasting time of 60min and magnetic field intensity of 9T.展开更多
The nanocrystalline Fe64Ni36 thin films were prepared by molecular-beam- vapor deposition under different magnetic flux densities. The microstructure and magnetic properties of thin films were examined by AFM, TEM, HR...The nanocrystalline Fe64Ni36 thin films were prepared by molecular-beam- vapor deposition under different magnetic flux densities. The microstructure and magnetic properties of thin films were examined by AFM, TEM, HRTEM and VSM. The results show that with the increase of magnetic flux densities, the changing trend of the average particle size is the same as the coercive force except 6 T. Under 6 T condition, the thin film became the mixture of bcc and fcc phases, which leads to slight increase of the coercive force. In addition, the HRTEM result shows the short-range ordered clusters (embryos) or nucleation rate of thin films increase with increasing magnetic flux densities.展开更多
This paper introduces a novel hybrid FEM-BEM method for calculating 3D eddy cur-rent field. In the eddy current region, the eddy current density J is solved by the finite element method (FEM) which is discretized by b...This paper introduces a novel hybrid FEM-BEM method for calculating 3D eddy cur-rent field. In the eddy current region, the eddy current density J is solved by the finite element method (FEM) which is discretized by brick finite element mesh, while in the eddy current free re-gion, the magnetic field intensity H is solved by the boundary element method (BEM) which is dis-cretized by rectangular boundary element mesh. Under the boundary conditions, an algebraic equation group is obtained that only includes J by eliminating H. This method has many advan-tages over traditional ones, such as fewer variables, more convenient coupling between the FEM and the BEM and wider application to multiply-connected regions. The calculated values of two models are in good agreement with experimental results. This shows the validity of our method.展开更多
文摘This article presents a three-dimensional analysis of the impact of the angle of incidence of the magnetic field intensity on the electrical performance (series resistance, shunt resistance) of a bifacial polycrystalline silicon solar cell. The cell is illuminated simultaneously from both sides. The continuity equation for the excess minority carriers is solved at the emitter and at the depth of the base respectively. The analytical expressions for photocurrent density, photovoltage, series resistance and shunt resistance were deduced. Using these expressions, the values of the series and shunt resistances were extracted for different values of the angle of incidence of the magnetic field intensity. The study shows that as the angle of incidence increases, the slopes of the minority carrier density for the two modes of operation of the solar cell decrease. This is explained by a drop in the accumulation of carriers in the area close to the junction due to the fact that the Lorentz force is unable to drive the carriers towards the lateral surfaces due to the weak action of the magnetic field, which tends to cancel out as the incidence angle increases, and consequently a drop in the open circuit photovoltage. This, in turn, reduces the Lorentz force. These results predict that the p-n junction of the solar cell will not heat up. The study also showed a decrease in series resistance as the incidence angle of the magnetic field intensity increased from 0 rad to π/2 rad and an increase in shunt resistance as the incidence angle increased. His behaviour of the electrical parameters when the angle of incidence of the field from 0 rad to π/2 rad shows that the decreasing magnetic field vector tends to be collinear with the electron trajectory. This allows them to cross the junction and participate in the external current. The best orientation for the Lorentz force is zero, in which case the carriers can move easily towards the junction.
基金supported by the China Jilin Province Science and Technology Development Project (No. 20190303101SF)the Sichuan Provincial Higher Education Key Laboratory Criminal Investigation Project-Criminal Science and Technology Laboratory (Sichuan Police College) (No. 2018YB04)+1 种基金Shanghai Jiao Tong Universitythe China Institute of Atomic Energy for their strong support
文摘A high-yield and beam-stable neutron tube can be applied in many fields.It is of great significance to the optimal external magnetic field intensity of the cold-cathode Penning ion source(PIS)and precisely controls the movement of deuterium(D),tritium(T)ions and electrons in the source of the neutron tubes.A cold-cathode PIS is designed based on the solenoidal magnetic field to obtain better uniformity of the magnetic field and higher yield of the neutron tube.The degree of magnetic field uniformity among the magnetic block,double magnetic rings and solenoidal ion sources is compared using finite element simulation methods.Using drift diffusion approximation and a magnetic field coupling method,the plasma distribution of hydrogen and the relationship between plasma density and magnetic field intensity at 0.06 Pa pressure and a solenoid magnetic field are obtained.The results show that the solenoidal ion source has the most uniform magnetic field distribution.The optimum magnetic field strength of about 0.1 T is obtained in the ion source at an excitation voltage of 1 V.The maximum average number density of monatomic hydrogen ions(H+)is 1×108 m−3,and an ion-beam current of about 14.51μA is formed under the−5000 V extraction field.The study of the solenoidal magnetic field contributes to the understanding of the particle dynamics within the PIS and provides a reference for the further improvement of the source performance of the neutron tube in the future.
基金financial support from the National Natural Science Foundation of China (Grant No. 51401134)the Scientific Research Funding Project of Liaoning Education Department (Grant No. LG201924)+1 种基金the Australian Research Council (ARCDE180101030) during the course of this work。
文摘For the first time, we developed porous Pt-Ni alloying nanoparticles with predominant(111) facets under intense magnetic fields. Electrochemical analysis revealed that the Pt-Ni alloying nanoparticles obtained at 2 Tesla exhibited a superior catalytic activity and durability for oxygen reduction reaction. This work demonstrated that the imposition of intense magnetic field could be considered as a new approach for developing efficient alloying electrocatalysts with preferential facets.
基金Projects(U1202274,51004033,51204040,50974035)supported by the National Natural Science Foundation of ChinaProjects(2010AA03A405,2012AA062303)supported by the National High Technology Research and Development Program(863 Prograam)of ChinaProject(N100302005)supported by the Fundamental Research Funds for the Central Universities,China
文摘The effects of magnetic field intensity, roasting temperature and roasting time on digestion rate and settling performance of bauxite with different iron contents were investigated systematically. The results indicate that such magnetic treatment can profoundly change the microstructure and digestion performance of bauxite. For the two samples carrying different iron contents, phase transformation of the aluminum oxide phase proceeds faster in the high iron bauxite than the low one. The optimal pretreatment conditions of low iron bauxite are roasting temperature 550 ℃ and magnetic field intensity 6 T, while for high iron bauxite are 500 ℃ and 9 T. The digestion rate of alumina can reach 95% and 92% at digestion temperature of 190 ℃ and 250 ℃. The settling performances of roasted ore by intense magnetic field after digestion are enhanced through pretreatment.
基金Project supported by the National Natural Science Foundation of China
文摘This study presents the effect of the magnetic field with constant intensity on the pulsatile flow through a rigid tube. Basing on the experimental results, the influence of the magnetic field on the blood viscosity is considered The analytic solution of the pulsatile flow through a rigid tube under constant magnetic field intensitier and the effect of the magnetic field on the velocity distribution, flow and impedance in a rigid tube are given. this investigation is valuable for understanding the influence of the magnetic field on the blood circulation.
基金the National Natural Science Foundation of China(Grant Nos.11374215 and 11704262)the Scientific Study Project from Education Department of Liaoning Province of China(Grant No.LJ2019004)the Natural Science Foundation Guidance Project of Liaoning Province of China(Grant No.2019-ZD-0070).
文摘We used the Jordan-Wigner transform and the invariant eigenoperator method to study the magnetic phase diagram and the magnetization curve of the spin-1/2 alternating ferrimagnetic diamond chain in an external magnetic field at finite temperature.The magnetization versus external magnetic field curve exhibits a 1/3 magnetization plateau at absolute zero and finite temperatures,and the width of the 1/3 magnetization plateau was modulated by tuning the temperature and the exchange interactions.Three critical magnetic field intensities H_(CB),H_(CE)and H_(CS) were obtained,in which the H_(CB) and H_(CE)correspond to the appearance and disappearance of the 1/3 magnetization plateau,respectively,and the higher H_(CS) correspond to the appearance of fully polarized magnetization plateau of the system.The energies of elementary excitation hω_(σ,k)(σ=1,2,3)present the extrema of zero at the three critical magnetic fields at 0 K,i.e.,[hω_(3,k)(H_(CB)]_(min)=0,[hω_(2,k)(H_(CE)]_(max)=0 and[hω_(2,k)(H_(CS)]_(min)=0,and the magnetic phase diagram of magnetic field versus different exchange interactions at 0 K was established by the above relationships.According to the relationships between the system’s magnetization curve at finite temperatures and the critical magnetic field intensities,the magnetic field-temperature phase diagram was drawn.It was observed that if the magnetic phase diagram shows a three-phase critical point,which is intersected by the ferrimagnetic phase,the ferrimagnetic plateau phase,and the Luttinger liquid phase,the disappearance of the 1/3 magnetization plateau would inevitably occur.However,the 1/3 magnetization plateau would not disappear without the three-phase critical point.The appearance of the 1/3 magnetization plateau in the low temperature region is the macroscopic manifestations of quantum effect.
基金Item Sponsored by the Natural Science Foundation of China(NO.51004033,No.50934005,No.50974035,No.51074047)National 863 plan(2010AA03A405,2012AA061403)+1 种基金Operation expenses for universities'basic scientific research(N100302005)The doctoral fund of EDU gov(20050145029)
文摘This paper investigates the changes of phase and apparent morphology under the combined effects of an intense magnetic field and temperature field.The effect of different roasting conditions on the digestion performance of roasted ore is also studied.The results indicate that roasting pretreatment under high magnetic fields can change the microstructure and digestion performance of bauxite.The Al phase changed faster of high iron bauxite than that of low iron bauxite.The digestion performance of low iron bauxite improved significantly through roasting pretreatment in intense magnetic field. But the digestion performance of bauxite get worse with the iron content in bauxite increase,because the high iron content of bauxite lead the shielding effect of magnetic field and make the crystal structure of bauxite stably,the surface area or low iron bauxite increased obviously during pretreatment.The optimal pretreatment condition of low iron bauxite is roasting temperature of 550℃,roasting time of 60min and magnetic field intensity of 6T,while for the high iron is roasting temperature of 500℃,roasting time of 60min and magnetic field intensity of 9T.
文摘The nanocrystalline Fe64Ni36 thin films were prepared by molecular-beam- vapor deposition under different magnetic flux densities. The microstructure and magnetic properties of thin films were examined by AFM, TEM, HRTEM and VSM. The results show that with the increase of magnetic flux densities, the changing trend of the average particle size is the same as the coercive force except 6 T. Under 6 T condition, the thin film became the mixture of bcc and fcc phases, which leads to slight increase of the coercive force. In addition, the HRTEM result shows the short-range ordered clusters (embryos) or nucleation rate of thin films increase with increasing magnetic flux densities.
文摘This paper introduces a novel hybrid FEM-BEM method for calculating 3D eddy cur-rent field. In the eddy current region, the eddy current density J is solved by the finite element method (FEM) which is discretized by brick finite element mesh, while in the eddy current free re-gion, the magnetic field intensity H is solved by the boundary element method (BEM) which is dis-cretized by rectangular boundary element mesh. Under the boundary conditions, an algebraic equation group is obtained that only includes J by eliminating H. This method has many advan-tages over traditional ones, such as fewer variables, more convenient coupling between the FEM and the BEM and wider application to multiply-connected regions. The calculated values of two models are in good agreement with experimental results. This shows the validity of our method.