Wafer‑Scale Vertical 1D GaN Nanorods/2D MoS_(2)/PEDOT:PSS for Piezophototronic Effect‑Enhanced Self‑Powered Flexible Photodetectors

van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.

Manipulating d-d orbital hybridization induced by Mo-doped Co_(9)S_(8) nanorod arrays for high-efficiency water electrolysis

Precisely refining the electronic structure of electrocatalysts represents a powerful approach to further optimize the electrocatalytic performance.Herein,we demonstrate an ingenious d-d orbital hybridization concept to construct Mo-doped Co_(9)S_(8) nanorod arrays aligned on carbon cloth(CC)substrate(abbreviated as Mo-Co_(9)S_(8)@CC hereafter)as a high-efficiency bifunctional electrocatalyst toward water electrolysis.It has experimentally and theoretically validated that the 4d-3d orbital coupling between Mo dopant and Co site can effectively optimize the H_(2)O activation energy and lower H^(*)adsorption energy barrier,thereby leading to enhanced hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)activities.Thanks to the unique electronic and geometrical advantages,the optimized Mo-Co_(9)S_(8)@CC with appropriate Mo content exhibits outstanding bifunctional performance in alkaline solution,with the overpotentials of 75 and 234 mV for the delivery of a current density of 10 mA cm^(-2),small Tafel slopes of 53.8 and 39.9 mV dec~(-1)and long-term stabilities for at least 32 and 30 h for HER and OER,respectively.More impressively,a water splitting electrolylzer assembled by the self-supported Mo-Co_(9)S_(8)@CC electrode requires a low cell voltage of 1.53 V at 10 mA cm^(-2)and shows excellent stability and splendid reversibility,demonstrating a huge potential for affordable and scalable electrochemical H_(2) production.The innovational orbital hybridization strategy for electronic regulation herein provides an inspirable avenue for developing progressive electrocatalysts toward new energy systems.

Effective removal of chromium,copper,and nickel heavy metal ions from industrial electroplating wastewater by in situ oxidative adsorption using sodium hypochlorite as oxidant and sodium trititanate nanorod as adsorbent

Sodium hypochlorite and synthesized sodium trititanate nanorods(Na_(2)Ti_(3)O_(7),186 nm×1270 nm)were used as the oxidant and adsorbents for in situ oxidative adsorption treatment of actual electroplating wastewater containing Cr(Ⅵ)(2.6-5.2 mg·L^(-1)),Cu^(2+)(2.7-5.4 mg·L^(-1)),and Ni^(2+)(0.2705-0.541 mg·L^(-1))ions at pH of 8.8-9.1 and 20-60℃.The as-synthesized sodium trititanate nanorods were characterized by XRD,HRTEM,N2 adsorption/desorption,SEM,EDX,and zeta potential techniques.The concentrations of heavy metal ions in wastewater were analyzed by ICP technique.After in situ oxidative adsorption treatment under the concentrations of 25 g·L^(-1) for sodium hypochlorite and 125 mg·L^(-1) for sodium trititanate nanorods at 60℃ for 5 h,the heavy metal ion concentrations could be reduced from initial value of 2.6 to final value of 1.92 mg·L^(-1) for Cr(Ⅵ),3.6 to 0.17 mg·L^(-1) for Cu^(2+),and from 0.2705 to 0.097 mg·L^(-1) for Ni^(2+),respectively.Cr(Ⅵ),Cu^(2+) and Ni^(2+) ions could be effectively removed by the in situ oxidative adsorption method.The in situ oxidative adsorption processes of Cr(Ⅵ),Cu^(2+) and Ni^(2+) ions are satisfactorily simulated by the pseudo-second order adsorption kinetics and Langmuir adsorption isotherm,respectively.Adsorption thermodynamics analyses reveal that the oxidative adsorption processes of Cr(Ⅵ),Cu^(2+) and Ni^(2+) ions are spontaneous and endothermic.The oxidation degree of metalcontained complexes influences the values of thermodynamics functions.

Heterostructured BiOI@La(OH)_3 nanorods with enhanced visible light photocatalytic NO removal

Heterostructured BiOI@La（OH）3 nanorod photocatalysts were prepared by a facile chemical impregnation method.The enhanced visible light absorption and charge carrier separation can be simultaneously realized after the introduction of BiOI particles into La（OH）3 nanorods.The BiOI@La（OH）3 composites were applied for visible light photocatalytic oxidization of NO in air and exhibited an enhanced activity compared with BiOI and pure La（OH）3 nanorods.The results show that the energy levels between the La（OH）3 and BiOI phases matched well with each other,thus forming a heterojunctioned BiOI@La（OH）3 structure.This band structure matching could promote the separation and transfer of photoinduced electron-hole pairs at the interface,resulting in enhanced photocatalytic performance under visible light irradiation.The photocatalytic performance of BiOI@La（OH）3 is shown to be dependent on the mass ratio of BiOI to La（OH）3.The highest photocatalytic performance can be achieved when the mass ratio of BiOI to La（OH）3 is controlled at 1.5.A further increase of the mass ratio of BiOI weakened the redox abilities of the photogenerated charge carriers.A new photocatalytic mechanism for BiOI@La（OH）3 heterostructures is proposed,which is directly related to the efficient separation of photogenerated charge carriers by the heterojunction.Importantly,the as-prepared BiOI@La（OH）3 heterostructures exhibited a high photochemical stability after multiple reaction runs.Our findings demonstrate that BiOI is an effective component for the formation of a heterostructure with the properties of a wide bandgap semiconductor,which is of great importance for extending the light absorption and photocatalytic activity of wide bandgap semiconductors into visible light region.

Preparation, friction and wear properties of hydrophobic lanthanum borate nanorods in rapeseed oil

Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The friction and wear properties of OA/LaBO3·H2O nanorods in rapeseed oil were evaluated with a four-ball tribo-tester. The results show that the as-prepared OA/LaBO3·H2O nanorods are hydrophobic and display nanorods morphology with uniform diameter of about 50 nm and length of up to 500 nm. In the meantime, OA/LaBO3·H2O nanorods can obviously improve the anti-wear and friction-reducing capacities of rapeseed oil, and the optimal anti-wear and friction-reducing properties of rapeseed oil were obtained at an OA/LaBO3·H2O content of 1% (mass fraction).

Effect of KOH treatment on structural and photovoltaic properties of ZnO nanorod arrays

ZnO nanorod arrays （NRs） were synthesized on the fluorine-doped SnO2 transparent conductive glass （FTO） by a simple chemical bath deposition （CBD） method combined with alkali-etched method in potassium hydroxide （KOH） solution. X-ray diffraction （XRD）, scanning electron microscopy （SEM） and current-voltage （I-V） curve were used to characterize the structure, morphologies and optoelectronic properties. The results demonstrated that ZnO NRs had wurtzite structures, the morphologies and photovoltaic properties of ZnO NRs were closely related to the concentration of KOH and etching time, well-aligned and uniformly distributed ZnO NRs were obtained after etching with 0.1 mol/L KOH for 1 h. ZnO NRs treated by KOH had been proved to have superior photovoltaic properties compared with high density ZnO NRs. When using ZnO NRs etched with 0.1 mol/L KOH for 1 h as the anode of solar cell, the conversion efficiency, short circuit current and open circuit voltage, compared with the unetched ZnO NRs, increased by 0.71%, 2.79 mA and 0.03 V, respectively.

Preparation of MnxNi0.5-xZn0.5Fe2O4 Nanorods by the Co-precipitation Method

MnxNi0.5-xZn0.5Fe2O4 nanorods were successfully synthesized by the thermal treatment of rod-like precursors that were fabricated by the co-precipitation of Mn2＋, Ni2＋, and Fe2＋ in the lye. The phase, morphology, and particle diameter were examined by the X-ray diffraction and transmission electron microscopy. The magnetic properties of the samples were studied using a vibrating sample magnetometer. nanorods with a diameter of 35 nm and an The results indicated that pure Ni0.5-xZn0.5Fe2O4 aspect ratio of 15 were prepared. It was found that the diametei of the MnxNi0.5-xZn0.5Fe2O4（0≤x≤0.5） samples increased, the length and the aspect .ratio decreased, with an increase in x value. When x=0.5, the diameter and the aspect ratio of the sample reached up to 50 nm and 7-8, respectively. The coercivity of the samples first increased and then decreased with the increase in the x value. The coercivity of the samples again increased when the x value was higher than 0.4. When x=0.5, the coercivity of the MnxNi0.5-xZn0.5Fe2O4 sample reached the maximal value （134.3 Oe） at the calcination temperature of 600 ℃. The saturation magnetization of the samples first increased and then. decreased with the increase in the x value. When x=0.2, the saturation magnetizat：ion of the sample reached the maximal value （68.5 emu/g） at the calcination temperature of 800 ℃.

Synthesis and Characterization of GaN Nanorods by Ammoniating Ga_2O_3 /Co Films Deposited on Si(111) Substrates

GaN nanorods are successfully synthesized on Si（111） substrates with magnetron sputtering through ammoniating Ga2O3/Co films at 950℃. X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy,and Fourier-transform infrared spectroscopy are used to characterize the samples. The results demonstrate that the nanorods are single-crystal GaN with a hexagonal wurtzite structure and possess relatively smooth surfaces. The growth mechanism of GaN nanorods is also discussed.

Synthesis, Characterization and Luminescent Properties of La2Zr2OT：Eu3＋ Nanorods

The Eu3＋-doped La2Zr207 phosphor with rod-like morphology was successfully synthesized by conventional solid state reaction and hydrothermal method. X-ray diffraction patterns, transmission electron microscopy, and photoluminescence spectra were employed to charac- terize its structure and morphology as well as luminescent properties. The results indicated that the red-emitting phosphor La2Zr207：Eu3＋ had well crystallized and belonged to the cubic structure with space group of Fd3m. The as-obtained product mainly appeared as straight nanorods with an average diameter of 47 nm and length of 50-700 nm. The pos- sible growth mechanism was also discussed. It was found that under blue excitation with a wavelength of 466 nm, the La2Zr2OT：Eu3＋ phosphor exhibited a characteristic red emission at 616 nm that was attributed to the hypersensitive 5D0--＊TF2 electric dipole transition of Eu3＋ ions. Meanwhile, it was more interesting to note that the emission of 5D1--＊TFj （J=0, 1, 2） transitions and the splitting patterns of 5D0---＋TFJ （J--l, 2, 4） transitions of Eu3＋ ions can be observed in the luminescent spectra of La2Zr207：Eu3＋. It was demonstrated that Eu3＋ preferred to occupy a low symmetry site.

Preparation and characterization of spinel LiMn_2O_4 nanorods as lithium-ion battery cathodes

The hydrothermal synthesis of single-crystallineβ-MnO2 nanorods and their chemical conversion into single-crystalline LiMn2O4 nanorods by a simple solid-state reaction were reported.This method has the advantages of producing pure,single-phase and crystalline nanorods.The LiMn2O4 nanorods have an diameter of about 300 nm.The discharge capacity and cyclic performance of the batteries were investigated.The LiMn2O4 nanorods show better cyclic performance with a capacity retention ratio of 86.2% after 100 cycles.Battery cyclic studies reveal that the prepared LiMn2O4 nanorods have high capacity with a first discharge capacity of 128.7 mA·h/g.

Hydrothermal Synthesis and Field Enhancement Behavior of ZnO Nanorods Pattern

We provide a new way to prepare ZnO nanorods pattern from the solution composed of hexamethylenetetramine （HMT） and Zn（NO3）2. The substrate is ITO substrate covered by well ordered Au islands. Since Au and the underneath ITO substrate have two different nucleation rates in the initial stage of heterogeneous nucleation process, the subsequent ZnO growth on the quick nucleating area takes place under diffusion control and is able to confine the synthesis of ZnO nanorods to specific locations. The concentrations of zinc nitrate and HMT are well adjusted to show the possibility of the new route for the patterning of the ZnO nanorods. Furthermore, the nanorods pattern was characterized by X-ray diffraction and photoluminescence and the performance of field emission property from ZnO nanorod patterns was investigated. The ZnO nanorods pattern with a good alignment also shows a good field enhancement behavior with a high value of the field enhancement factor.

Effect of annealing treatment on morphologies and gas sensing properties of ZnO nanorods

The high-temperature stabilization of ZnO nanorods synthesized by hydrothermal treatment was investigated. The structure and morphologies of ZnO nanorods were characterized by XRD and SEM, respectively. The thermal stability of ZnO nanorods was also detected by thermal gravity analyzing. Thermal annealing treatment results indicate that ZnO nanorods are fundamentally stable when annealing temperature is lower than 600 ℃. When annealing temperature is beyond 600℃, the diameters of ZnO nanorods obviously decrease and the aggravating tendency of nanorods between each other also increase. Annealing treatment can greatly influence the gas sensing properties of ZnO nanorods. Comparing with ZnO nanorods without annealing treatment, the gas sensing property of ZnO nanorods to H2 with concentration of 2.5×10-6 can increase from 2.22 to 3.56. ZnO nanorods annealed at 400 ℃ exhibit optimum gas sesing property to H2 gas.

Synthesis of GaN Nanorods with Herringbone Morphology

Hexagonal GaN nanorods are synthesized on quartz substrates through ammoniating Ga 2O 3 thin films deposited by radio frequency magnetron sputtering.X ray diffraction (XRD),scanning electron microscopy (SEM),high resolution transmission electron microscopy (HRTEM),and photoluminescence (PL) are used to analyze the synthesized GaN nanorods.Among the products,one dimensional GaN nanostructures owning protuberances on the surface are detected,which show interesting herringbone morphology.The analysis reveals that the herringbone GaN nanorods are polycrystalline composed of overlapping parallelepiped GaN nanocrystals arranged along the major axis.The large blue shift of yellow PL luminescence of the nanorods is observed at room temperature.

Synthesis and Characterization of Nickel Nanorods Transferred from Hydrotherally Decomposed Rod-like NiS

Powders of hexagonal-structured single-crystalline nickel sulfide nanorods have been synthesized in cetyltrimethy ammonium bromide （CTAB）/water/hexane/n-pentanol quaternary microemulsion under hydrothermal conditions by using the reaction of carbamide and carbon disulfide as a sulfide source. Single-crystalline nickel nanorods have been synthesized via thermal decomposition by using single-crystalline nickel sulfide nanorods as precursor. The influence of different reaction parameters on the morphology of the products has been investigated. The structure, morphology and magnetic properties of the products were characterized by X-ray diffraction （XRD）, transmission electron microscope （TEM）, calorimeter （TGA-DSC） and vibrating sample magnetometer showed that the specific saturation magnetization （σs） and 37.5 emu/g and 68.50e, respectively. thermogravimetric analysis-differential scanning （VSM）. The results of coercivity values （Hc） magnetic measurements of nickel nanorods were

Ferromagnetic MnSb Films Consisting of Nanorods and Nanoleaves

Ferromagnetic MnSb films were synthesized on Si wafers by physical vapor deposition. X-ray diffraction revealed that the films primarily consisted of MnSb alloy. Nanorods and nanoleaves were observed in the MnSb films by field-emission scanning electron microscopy. These nanorods had an average diameter of 20nm and a length of up to hundreds of nanometers. The nanoleaves had a width and thickness of about 100 and 20nm, respectively. Magnetic hysteresis loops were measured by an alternative gradient magnetometer, and the loops showed strong geometrical anisotropy.

Catalytic Performance of MnOx Nanorods in Aerobic Oxidation of Benzyl Alcohol

Various manganese oxide nanorods with similar one-dimensional morphology were prepared by calcination of MnOOH nanorods under different gas atmosphere and at different temper- atures, which were synthesized by a hydrothermal route. The morphology and structure of MnOx catalysts were characterized by a series of techniques including X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and tempera- ture programmed reduction （TPR）. The catalytic activities of the prepared MnO~ nanorods were tested in the liquid phase aerobic oxidation of benzyl alcohol, which follow a sequence as MnO2〉Mn203~Mn304〉MnOOH with benzaldehyde being the main product. On the basis of H2-TPR results, the superior activity of MnO2 is ascribed to its lower reduction temperature and therefore high oxygen mobility and excellent redox ability. Moreover, a good recycling ability was observed over MnO2 catalysts by simply thermal treatment in air.

Fluorescent Silicon Nanorods-Based Nanotheranostic Agents for Multimodal Imaging-Guided Photothermal Therapy

The utilization of diagnosis to guide/aid therapy procedures has shown great prospects in the era of personalized medicine along with the recognition of tumor heterogeneity and complexity.Herein,a kind of multifunctional silicon-based nanostructure,i.e.,gold nanoparticles-decorated fluorescent silicon nanorods(Au@SiNRs),is fabricated and exploited for tumor-targeted multimodal imaging-guided photothermal therapy.In particular,the prepared Au@SiNRs feature high photothermal conversion efficiency(~43.9%)and strong photothermal stability(photothermal performance stays constant after five-cycle NIR laser irradiation),making them high-performance agents for simultaneously photoacoustic and infrared thermal imaging.The Au@SiNRs are readily modified with targeting peptide ligands,enabling an enhanced tumor accumulation with a high value of^8.74%ID g?1.Taking advantages of these unique merits,the Au@SiNRs are superbly suitable for specifically ablating tumors in vivo without appreciable toxicity under the guidance of multimodal imaging.Typically,all the mice treated with the Au@SiNRs remain alive,and no distinct tumor recurrence is observed during 60-day investigation.

Mg(OH)_2 Nanorods Synthesized by A Facile Hydrothermal Method in the Presence of CTAB

Magnesium hydroxide(Mg(OH)_2) nanorods were synthesized by a simple and facile hydrothermal method in the presence of cetyltetramethylammonium bromide(CTAB) as a surfactant. Nanorods of magnesium oxide Mg O were also induced by thermal decomposition of Mg(OH)_2 nanorods at 700. By using disk diffusion technique, the Mg(OH)_2 nanorods were found to exhibit higher antibacterial efficiency against several tested bacterial strains.

Synthesis of ZnO nanorods and their optical absorption in visible-light region

Single crystalline ZnO nanorods were prepared by the hydrothermal method with synthesized ZnCl2·4Zn（OH）2 as the precursor. Morphologies of the nanorods were controlled by various reaction conditions with cetyltrimethylammonium bromide （CTAB） as the modifying agent. The nanorods were characterized by XRD, TEM, UV-Vis spectra, and IR spectra. The microstructure of holes in nanosize was observed on the surface of the nanorods. The UV-Vis spectra indicate that the as-prepared ZnO nanorods have absorption of visible-hght as well as ultraviolet-light. Therefore, these nanorods may be good candidates for visible-light photocatalysis materials from the viewpoint of practical applications. The reason for visible-light absorption was discussed in this article.

Hybrid Field-Effect Transistors and Photodetectors Based on Organic Semiconductor and CsPbI_3 Perovskite Nanorods Bilayer Structure

The outstanding performances of nanostructured allinorganic CsPbX_3(X = I, Br, Cl) perovskites in optoelectronic applications can be attributed to their unique combination of a suitable bandgap, high absorption coefficient, and long carrier lifetime, which are desirable for photodetectors. However, the photosensing performances of the CsPbI_3 nanomaterials are limited by their low charge-transport efficiency. In this study, a phototransistor with a bilayer structure of an organic semiconductor layer of 2,7-dioctyl [1] benzothieno[3,2-b] [1] benzothiophene and CsPbI_3 nanorod layer was fabricated. The high-quality CsPbI_3 nanorod layer obtained using a simple dip-coating method provided decent transistor performance of the hybrid transistor device.The perovskite layer efficiently absorbs light, while the organicsemiconductor layer acts as a transport channel for injected photogenerated carriers and provides gate modulation. The hybrid phototransistor exhibits high performance owing to the synergistic function of the photogating effect and field effect in the transistor,with a photoresponsivity as high as 4300 A W^(-1), ultra-high photosensitivity of 2.2 9 106, and excellent stability over 1 month.This study provides a strategy to combine the advantages of perovskite nanorods and organic semiconductors in fabrication of high-performance photodetectors.