Spatial pattern recognition for near-surface high temperature increases in mountain areas using MODIS and SRTM DEM

Abrupt near-surface temperature changes in mountainous areas are a special component of the mountain climate system.Fast and accurate measurements of the locations,intensity,and width of the near-surface changes are necessary but highly difficult due to the complicated environmental conditions and instrumental issues.This paper develops a spatial pattern recognition method to measure the near-surface high temperature increase(NSHTI),one of the lesser-attended changes.First,raster window measurement was proposed to calculate the temperature lapse rate using MODIS land surface temperature and SRTM DEM data.It fully considers the terrain heights of two neighboring cells on opposite or adjacent slopes with a moving window of 3×3 cell size.Second,a threshold selection was performed to identify the NSHTI cells using a threshold of-0.65℃/100 m.Then,the NSHTI strips were parameterized through raster vectorization and spatial analysis.Taking Yunnan,a mountainous province in southwestern China,as the study area,the results indicate that the NSHTI cells concentrate in a strip-like pattern along the mountains and valleys,and the strips are almost parallel to the altitude contours with a slight northward uplift.Also,they are located mostly at a 3/5 height of high mountains or within 400 m from the valley floors,where the controlling topographic index is the altitude of the terrain trend surface but not the absolute elevation and the topographic uplift height and cutting depth.Additionally,the NSHTI intensity varies with the geographic locations and the proportions increase with an exponential trend,and the horizontal width has a mean of about 1000 m and a maximum of over 5000 m.The result demonstrates that the proposed method can effectively recognize NSHTI boundaries over mountains,providing support for the modeling of weather and climate systems and the development of mountain resources.

Expression and clinical significance of pattern recognition receptor-associated genes in hand, foot and mouth disease

Objective:To explore which pattern recognition receptors(PRRs)play a key role in the development of hand,foot,and mouth disease(HFMD)by analyzing PRR-associated genes.Methods:We conducted a comparative analysis of PRR-associated gene expression in human peripheral blood mononuclear cells(PBMCs)infected with enterovirus 71(EV-A71)which were derived from patients with HFMD of different severities and at different stages.A total of 30 PRR-associated genes were identified as significantly upregulated both over time and across different EV-A71 isolates.Subsequently,ELISA was employed to quantify the expression of the six most prominent genes among these 30 identified genes,specifically,BST2,IRF7,IFI16,TRIM21,MX1,and DDX58.Results:Compared with those at the recovery stage,the expression levels of BST2(P=0.027),IFI16(P=0.016),MX1(P=0.046)and DDX58(P=0.008)in the acute stage of infection were significantly upregulated,while no significant difference in the expression levels of IRF7(P=0.495)and TRIM21(P=0.071)was found between different stages of the disease.The expression levels of BST2,IRF7,IFI16 and MX1 were significantly higher in children infected with single pathogen than those infected with mixed pathogens,and BST2,IRF7,IFI16 and MX1 expression levels were significantly lower in coxsackie B virus(COXB)positive patients than the negative patients.Expression levels of one or more of BST2,IRF7,IFI16,TRIM21,MX1 and DDX58 genes were correlated with PCT levels,various white blood cell counts,and serum antibody levels that reflect disease course of HFMD.Aspartate aminotransferase was correlated with BST2,MX1 and DDX58 expression levels.Conclusions:PRR-associated genes likely initiate the immune response in patients at the acute stage of HFMD.

Dynamic Signature Verification Using Pattern Recognition

Dynamic signature is a biometric modality that recognizes an individual’s anatomic and behavioural characteristics when signing their name. The rampant case of signature falsification (Identity Theft) was the key motivating factor for embarking on this study. This study was necessitated by the damages and dangers posed by signature forgery coupled with the intractable nature of the problem. The aim and objectives of this study is to design a proactive and responsive system that could compare two signature samples and detect the correct signature against the forged one. Dynamic Signature verification is an important biometric technique that aims to detect whether a given signature is genuine or forged. In this research work, Convolutional Neural Networks (CNNsor ConvNet) which is a class of deep, feed forward artificial neural networks that has successfully been applied to analysing visual imagery was used to train the model. The signature images are stored in a file directory structure which the Keras Python library can work with. Then the CNN was implemented in python using the Keras with the TensorFlow backend to learn the patterns associated with the signature. The result showed that for the same CNNs-based network experimental result of average accuracy, the larger the training dataset, the higher the test accuracy. However, when the training dataset are insufficient, better results can be obtained. The paper concluded that by training datasets using CNNs network, 98% accuracy in the result was recorded, in the experimental part, the model achieved a high degree of accuracy in the classification of the biometric parameters used.

Hierarchical pattern recognition of landform elements considering scale adaptation

Landform elements with varying morphologies and spatial arrangements are recognized as feature indicator of landform classification and play a critical role in geomorphological studies.Differential geometry method has been extensively applied in prior landform element research,while its efficacy in differentiating similar morphological characteristics remains inadequate to date.To reduce reliance on geomorphometric variables and increase awareness of landform patterns,geomorphons method was generated in previous study corresponding to specific landform reclassification map based on lookup table.Besides,to address the problem of feature similarity,hierarchical classification was proposed and effectively utilized for terrain recognition through the analytical strategy of fuzzy gradient features.Thus,combining the advantages of these two aspects,a hierarchical framework was proposed in this study for landform element pattern recognition considering the morphology and hierarchy factors.First,the local triplet patterns derived from geomorphons were enhanced by setting the flatness threshold,and subsequently adopted for the primary landform element recognition.Then,as geomorphic units with the same morphology possess different spatial analytical scales,the unidentified landform elements under the principle of scale adaptation were determined by calculating the spatial correlation and entropy information.To ensure the effectiveness of this proposed method,the sampling points were randomly selected from NASADEM data and then validated against a real 3D terrain model.Quantitative results of landform element pattern recognition demonstrate that our approach can reach above 77%average accuracy.Additionally,it delineates local details more effectively than geomorphons in visual assessment,resulting in a 7%accuracy improvement in overall scale.

Crack Fault Diagnosis and Location Method for a Dual-Disk Hollow Shaft Rotor System Based on the Radial Basis Function Network and Pattern Recognition Neural Network

The crack fault is one of the most common faults in the rotor system,and researchers have paid close attention to its fault diagnosis.However,most studies focus on discussing the dynamic response characteristics caused by the crack rather than estimating the crack depth and position based on the obtained vibration signals.In this paper,a novel crack fault diagnosis and location method for a dual-disk hollow shaft rotor system based on the Radial basis function(RBF)network and Pattern recognition neural network(PRNN)is presented.Firstly,a rotor system model with a breathing crack suitable for a short-thick hollow shaft rotor is established based on the finite element method,where the crack's periodic opening and closing pattern and different degrees of crack depth are considered.Then,the dynamic response is obtained by the harmonic balance method.By adjusting the crack parameters,the dynamic characteristics related to the crack depth and position are analyzed through the amplitude-frequency responses and waterfall plots.The analysis results show that the first critical speed,first subcritical speed,first critical speed amplitude,and super-harmonic resonance peak at the first subcritical speed can be utilized for the crack fault diagnosis.Based on this,the RBF network and PRNN are adopted to determine the depth and approximate location of the crack respectively by taking the above dynamic characteristics as input.Test results show that the proposed method has high fault diagnosis accuracy.This research proposes a crack detection method adequate for the hollow shaft rotor system,where the crack depth and position are both unknown.

Fuzzy pattern recognition model of geological sweetspot for coalbed methane development

From the perspective of geological zone selection for coalbed methane(CBM) development, the evaluation parameters(covering geological conditions and production conditions) of geological sweetspot for CBM development are determined, and the evaluation index system of geological sweetspot for CBM development is established. On this basis, the fuzzy pattern recognition(FPR) model of geological sweetspot for CBM development is built. The model is applied to evaluate four units of No.3 Coal Seam in the Fanzhuang Block, southern Qinshui Basin, China. The evaluation results are consistent with the actual development effect and the existing research results, which verifies the rationality and reliability of the FPR model. The research shows that the proposed FPR model of geological sweetspot for CBM development does not involve parameter weighting which leads to uncertainties in the results of the conventional models such as analytic hierarchy process and multi-level fuzzy synthesis judgment, and features a simple computation without the construction of multi-level judgment matrix. The FPR model provides reliable results to support the efficient development of CBM.

Numerical Comparison of Shapeless Radial Basis Function Networks in Pattern Recognition

This work focuses on radial basis functions containing no parameters with themain objective being to comparatively explore more of their effectiveness.For this,a total of sixteen forms of shapeless radial basis functions are gathered and investigated under the context of the pattern recognition problem through the structure of radial basis function neural networks,with the use of the Representational Capability(RC)algorithm.Different sizes of datasets are disturbed with noise before being imported into the algorithm as‘training/testing’datasets.Each shapeless radial basis function is monitored carefully with effectiveness criteria including accuracy,condition number(of the interpolation matrix),CPU time,CPU-storage requirement,underfitting and overfitting aspects,and the number of centres being generated.For the sake of comparison,the well-known Multiquadric-radial basis function is included as a representative of shape-contained radial basis functions.The numerical results have revealed that some forms of shapeless radial basis functions show good potential and are even better than Multiquadric itself indicating strongly that the future use of radial basis function may no longer face the pain of choosing a proper shape when shapeless forms may be equally(or even better)effective.

Human Personality Assessment Based on Gait Pattern Recognition Using Smartphone Sensors

Human personality assessment using gait pattern recognition is one of the most recent and exciting research domains.Gait is a person’s identity that can reflect reliable information about his mood,emotions,and substantial personality traits under scrutiny.This research focuses on recognizing key personality traits,including neuroticism,extraversion,openness to experience,agreeableness,and conscientiousness,in line with the bigfive model of personality.We inferred personality traits based on the gait pattern recognition of individuals utilizing built-in smartphone sensors.For experimentation,we collected a novel dataset of 22 participants using an android application and further segmented it into six data chunks for a critical evaluation.After data pre-processing,we extracted selected features from each data segment and then applied four multiclass machine learning algorithms for training and classifying the dataset corresponding to the users’Big-Five Personality Traits Profiles(BFPT).Experimental results and performance evaluation of the classifiers revealed the efficacy of the proposed scheme for all big-five traits.

Intent Pattern Recognition of Lower-limb Motion Based on Mechanical Sensors

Based on the regularity nature of lower-limb motion,an intent pattern recognition approach for above-knee prosthesis is proposed in this paper. To remedy the defects of recognizer based on electromyogram(EMG), we develop a pure mechanical sensor architecture for intent pattern recognition of lower-limb motion. The sensor system is composed of an accelerometer, a gyroscope mounted on the prosthetic socket, and two pressure sensors mounted under the sole. To compensate the delay in the control of prosthesis, the signals in the stance phase are used to predict the terrain and speed in the swing phase. Specifically, the intent pattern recognizer utilizes intraclass correlation coefficient(ICC) according to the Cartesian product of walking speed and terrain. Moreover, the sensor data are fused via DempsterShafer's theory. And hidden Markov model(HMM) is used to recognize the realtime motion state with the reference of the prior step. The proposed method can infer the prosthesis user's intent of walking on different terrain, which includes level ground,stair ascent, stair descent, up and down ramp. The experiments demonstrate that the intent pattern recognizer is capable of identifying five typical terrain-modes with the rate of 95.8%. The outcome of this investigation is expected to substantially improve the control performance of powered above-knee prosthesis.

New pattern recognition system in the e-nose for Chinese spirit identification

This paper presents a new pattern recognition system for Chinese spirit identification by using the polymer quartz piezoelectric crystal sensor based e-nose. The sensors are designed based on quartz crystal microbalance（QCM） principle,and they could capture different vibration frequency signal values for Chinese spirit identification. For each sensor in an8-channel sensor array, seven characteristic values of the original vibration frequency signal values, i.e., average value（A）,root-mean-square value（RMS）, shape factor value（S_f）, crest factor value（C_f）, impulse factor value（I_f）, clearance factor value（CL_f）, kurtosis factor value（K_v） are first extracted. Then the dimension of the characteristic values is reduced by the principle components analysis（PCA） method. Finally the back propagation（BP） neutral network algorithm is used to recognize Chinese spirits. The experimental results show that the recognition rate of six kinds of Chinese spirits is 93.33% and our proposed new pattern recognition system can identify Chinese spirits effectively.

Authentication and distinction of Shenmai injection with HPLC fingerprint analysis assisted by pattern recognition techniques

In this paper, the feasibility and advantages of employing high performance liquid chromatographic （HPLC） fingerprints combined with pattern recognition techniques for quality control of Shenmai injection were investigated and demonstrated. The Similarity Evaluation System was employed to evaluate the similarities of samples of Shenmai injection, and the HPLC generated chromatographic data were analyzed using hierarchical clustering analysis （HCA） and soft independent modeling of class analogy （SIMCA）. Consistent results were obtained to show that the authentic samples and the blended samples were successfully classified by SIMCA, which could be applied to accurate discrimination and quality control of Shenmai injection. Furthermore, samples could also be grouped in accordance with manufacturers. Our results revealed that the developed method has potential perspective for the original discrimination and quality control of Shenmai injection.

Group Decision Making Based Fuzzy Pattern Recognition Model for Lectotype Optimization of Offshore Platforms 1

This paper develops a fuzzy pattern recognition model for group decision making to solve the problem of lectotype optimization of offshore platforms. The lack of data and the inexact or incomplete information for criteria are the main cause of uncertainty in the evaluation process, therefore it is necessary to integrate the judgments from different decision makers with different experience, knowledge and preference. This paper first uses a complementary principle based pairwise comparison method to obtain the subjective weight of the criteria from each decision maker. A fuzzy pattern recognition model is then developed to integrate the judgments from all the decision makers and the information from the criteria, under the supervision of the subjective weights. Finally a case study is given to show the efficiency and robustness of the proposed model.

Practical Pattern Recognition System for Distributed Optical Fiber Intrusion Monitoring Based on Ф-COTDR

At present, the demand for perimeter security system is in-creasing greatly, especially for such system based on distribut-ed optical fiber sensing. This paper proposes a perimeter se-curity monitoring system based on phase-sensitive coherentoptical time domain reflectometry(Ф-COTDR) with the practi-cal pattern recognition function. We use fast Fourier trans-form(FFT) to exact features from intrusion events and a multi-class classification algorithm derived from support vector ma-chine(SVM) to work as a pattern recognition technique. Fivedifferent types of events are classified by using a classifica-tion algorithm based on SVM through a three-dimensional fea-ture vector. Moreover, the identification results of the patternrecognition system show that an identification accurate rate of92.62% on average can be achieved.

Efficiency of sample-based indices for spatial pattern recognition of wild pistachio(Pistacia atlantica) trees in semi-arid woodlands

The efficiency of sample-based indices proposed to quantify the spatial distribution of trees is influenced by the structure of tree stands, environmental heterogeneity and degree of aggregation. We evaluated 10 commonly used distance-based and 10 density-based indices using two structurally different stands of wild pistachio trees in the Zagros woodlands, Iran, to assess the reliability of each in revealing stand structure in woodlands. All trees were completely stem-mapped in a nearly pure（40 ha） and a mixed（45 ha） stand. First, the inhomogeneous pair correlation function [g（r）] and the Clark-Evans index（CEI） were used as references to reveal the true spatial arrangement of all trees in these stands. The sampled data were then evaluated using the 20 indices.Sampling was undertaken in a grid based on a square lattice using square plots（30 m 9 30 m） and nearest neighbor distances at the sample points. The g（r） and CEI statistics showed that the wild pistachio trees were aggregated in both stands, although the degree of aggregation was markedly higher in the pure stand. Three distance- and six density-based indices statistically verified that the wild pistachio trees were aggregated in both stands. The distance-based Hines and Hines statistic（ht） and the densitybased standardised Morisita（Ip）, patchiness（IP） and Cassie（CA） indices revealed aggregation of the trees in the two structurally different stands in the Zagros woodlands and the higher clumping in the pure stand, whereas the other indices were not sensitive enough.

Pattern recognition and data mining software based on artificial neural networks applied to proton transfer in aqueous environments

In computational physics proton transfer phenomena could be viewed as pattern classification problems based on a set of input features allowing classification of the proton motion into two categories： transfer ＇occurred＇ and transfer ＇not occurred＇. The goal of this paper is to evaluate the use of artificial neural networks in the classification of proton transfer events, based on the feed-forward back propagation neural network, used as a classifier to distinguish between the two transfer cases. In this paper, we use a new developed data mining and pattern recognition tool for automating, controlling, and drawing charts of the output data of an Empirical Valence Bond existing code. The study analyzes the need for pattern recognition in aqueous proton transfer processes and how the learning approach in error back propagation （multilayer perceptron algorithms） could be satisfactorily employed in the present case. We present a tool for pattern recognition and validate the code including a real physical case study. The results of applying the artificial neural networks methodology to crowd patterns based upon selected physical properties （e.g., temperature, density） show the abilities of the network to learn proton transfer patterns corresponding to properties of the aqueous environments, which is in turn proved to be fully compatible with previous proton transfer studies.

ON THE IDENTIFICATION OF RESIDUAL IMPACT PROPERTIES OF MATERIALS BY ACOUSTO-ULTRASONICS——A PATTERN RECOGNITION APPROACH

This paper deals with the application of Acousto-ultrasonics,in con- junction with Pattern Recognition and Classification techniques,to the identification of residual impact properties of a class of polymeric material,namely,Polyvinylchlo- ride(PVC).PVC specimens of different low-energy repeated impact damage states are processed by Acousto-ultrasonics(AU)to retrieve AU signals in the form of dig- italized records.These AU signals are grouped as distinct classes,each pertaining to a known level of repeated impact damage.Describing features of these AU signals are used to build Pattern Recognition(PR)Classifiers.These classifiers are used to identify unknown damage states in other PVC specimens by classifying the re- trieved AU signals as belonging to one of the classes.The obtained results indicate that Acousto-ultrasonics in combination with Pattern Recognition and Classification techniques can be used for the quantitative non-destructive identification of damage states in PVC specimens of unknown low-energy repeated impact conditions.

Application of the new pattern recognition system in the new e-nose to detecting Chinese spirits

We present a new pattern recognition system based on moving average and linear discriminant analysis （LDA）, which can be used to process the original signal of the new polymer quartz piezoelectric crystal air-sensitive sensor system we designed, called the new e-nose. Using the new e-nose, we obtain the template datum of Chinese spirits via a new pattern recognition system. To verify the effectiveness of the new pattern recognition system, we select three kinds of Chinese spirits to test, our results confirm that the new pattern recognition system can perfectly identify and distinguish between the Chinese spirits.

Applications of Pattern Recognition in Drug Discovery

This is a brief account of the plenary talk given to the meeting of the Chinese Society of Chemical Science and Technology held in Oxford on 6 October 2001. The talk covered the application of pattern recognition techniques to discover molecules which will bind to the binding sites of proteins. Three situations were considered: the structure of the protein being unknown; the structure known but the binding site unknown; and finally, and this is the most important case for the future, both the structure and nature of the target site available in atomic detail. For this case we have developed a massively distributed computer program using a screensaver which now involves over one million personal computers, including over a thousand in China. The project will involve the screening of 3 5 billion small molecules against 16 protein targets, all of which are implicated in the process of cancer.

QUALITY ASSESSMENT OF GINSENG BY CHEMICAL FUZZY PATTERN RECOGNITION

A new method of assessing ginseng and screening its bioactive constituents by fuzzy pattern recognition has been proposed.

Application study of image segmentation methods on pattern recognition in the course of wood across-compression

Image segmentation is one of important steps on pattern recognition study in the course of wood across-compression. By comparing and studying processing methods in finding cell space and cell wall, this paper puts forward some image segmentation methods that are suitable for study of cell images of wood crossgrained compression. The method of spline function fitting was used for linking edges of cell, which perfects the study of pattern recognition in the course of wood across-compression.