On the method of the automatic modeling in hydraulic pipe networks

In this paper the dynamic characteristics in pipes are analyzed with frequency method, and puts forward a simple and practical describing method. By establishing the model library beforehand, the modeling of the pipe net is completed automatically, and we can accurately calculate the impedance characteristics of the pipe network, achieve the reasonable configuration of the pipe network, so that to decrease the pressure pulsation.

Effectiveness of urban distributed runoff model for discharge and water depth calculation in urban drainage pipe networks

Effective urban land-use re-planning and the strategic arrangement of drainage pipe networks can significantly enhance urban flood defense capacity.Aimed at reducing the potential risks of urban flooding,this paper presents a straightforward and efficient approach to an urban distributed runoff model(UDRM).The model is developed to quantify the discharge and water depth within urban drainage pipe networks under varying rainfall intensities and land-use scenarios.The Nash efficiency coefficient of UDRM exceeds 0.9,which indicates its high computational efficiency and potential benefit in predicting urban flooding.The prediction of drainage conditions under both current and re-planned land-use types is achieved by adopting different flood recurrence intervals.The findings reveal that the re-planned land-use strategies could effectively diminish flood risk upstream of the drainage pipe network across 20-year and 50-year flood recurrence intervals.However,in the case of extreme rainfall events(a 100-year flood recurrence),the re-planned land-use approach fell short of fulfilling the requirements necessary for flood disaster mitigation.In these instances,the adoption of larger-diameter drainage pipes becomes an essential requisite to satisfy drainage needs.Accordingly,the proposed UDRM effectively combines land-use information with pipeline data to give practical suggestions for pipeline modification and land-use optimization to combat urban floods.Therefore,this methodology warrants further promotion in the field of urban re-planning.

FVS SCHEME FOR SEVERE TRANSIENT FLOW IN PIPE NETWORKS

An efficient numerical method with first and second order accuracy is developed by the flux split technology to simulate the water hammer problem in single and multiple pipe networks under severe transient conditions. The finite volume formulation ensures that both schemes conserve mass and momentum and produces physically realizable shock fronts. The conception of the fictitious cell at the junction is developed. The typical water hammer problem and the experi ment with friction and the comprehensive orbicular network with control valve and pressure relief valve and surge tank are implemented to test the numerical method. Strong numerical evidences show that the proposed scheme has several desirable properties, such as, accurate, efficient, robust, high shock resolution, conservative and stable for Courant number.

Computational Fluid Dynamics Approach for Predicting Pipeline Response to Various Blast Scenarios: A Numerical Modeling Study

Recent industrial explosions globally have intensified the focus in mechanical engineering on designing infras-tructure systems and networks capable of withstanding blast loading.Initially centered on high-profile facilities such as embassies and petrochemical plants,this concern now extends to a wider array of infrastructures and facilities.Engineers and scholars increasingly prioritize structural safety against explosions,particularly to prevent disproportionate collapse and damage to nearby structures.Urbanization has further amplified the reliance on oil and gas pipelines,making them vital for urban life and prime targets for terrorist activities.Consequently,there is a growing imperative for computational engineering solutions to tackle blast loading on pipelines and mitigate associated risks to avert disasters.In this study,an empty pipe model was successfully validated under contact blast conditions using Abaqus software,a powerful tool in mechanical engineering for simulating blast effects on buried pipelines.Employing a Eulerian-Lagrangian computational fluid dynamics approach,the investigation extended to above-surface and below-surface blasts at standoff distances of 25 and 50 mm.Material descriptions in the numerical model relied on Abaqus’default mechanical models.Comparative analysis revealed varying pipe performance,with deformation decreasing as explosion-to-pipe distance increased.The explosion’s location relative to the pipe surface notably influenced deformation levels,a key finding highlighted in the study.Moreover,quantitative findings indicated varying ratios of plastic dissipation energy(PDE)for different blast scenarios compared to the contact blast(P0).Specifically,P1(25 mm subsurface blast)and P2(50 mm subsurface blast)showed approximately 24.07%and 14.77%of P0’s PDE,respectively,while P3(25 mm above-surface blast)and P4(50 mm above-surface blast)exhibited lower PDE values,accounting for about 18.08%and 9.67%of P0’s PDE,respectively.Utilising energy-absorbing materials such as thin coatings of ultra-high-strength concrete,metallic foams,carbon fiber-reinforced polymer wraps,and others on the pipeline to effectively mitigate blast damage is recommended.This research contributes to the advancement of mechanical engineering by providing insights and solutions crucial for enhancing the resilience and safety of underground pipelines in the face of blast events.

Selection of Water Transmission Method and Analysis of Pipe Network Zoning in Municipal Water Supply and Drainage Design

With the acceleration of urbanization,the demand for water supply and drainage pipe networks has increased significantly.In the planning of urban construction,it is necessary to optimize the design of the water supply and drainage system pipe network to effectively save energy while providing residents with more accessible water resources.Therefore,the municipal water supply and drainage system and the water transmission methods should be designed according to the geographical conditions of the city.In this paper,we mainly analyze the design of municipal water supply and drainage systems and the selection of water transmission methods.Besides,the optimization of the water supply and drainage network zoning process and pipe network maintenance is also discussed,so as to provide a reference for municipal water supply and drainage work.

Application of Dynamic Programming Method in Optimization of Water Distribution Pipe Network

With a water-supply network by dynamic programming. The minimal as an example, the network was optimized annual discounted costs were taken as an objective function and node pressure etc. as constraint conditions. The alternative pipe diameters were optimized as per enumeration method and the group allowing objective function with the least values would be the optimized one. It is proved the optimized pipe network reduced by 11.49% in terms of cost and the optimized ben- efits proved much significant.

Basic Research on Key Techniques Related to Urban 3D Pipe Network Modeling

A new geometric modeling approach is introduced in this paper.First the principle of modeling of 3D pipe network is discussed in detail.Then the procedures of implementing pipe network visualization and system functions are presented.Last,several efficient methods for speeding up display of graphics are introduced.The new geometric modeling approach offers to people a new way to solve 3D visualization of complex urban pipe network.

A Linear Programming Model for Seabed Oil-Gas Pipe Network

This paper analyzes the pipe network system of oil-gas collection and transportation for offshore oilfield development. A '0-1' integer linear programming model is constructed to optimize the investment of seabed pipe network. The mathematical model is solved by the spanning tree method of graph theory and network analysis. All spanning trees of a network graph compose all the feasible solutions of the mathematical model. The optimal solution of the model is the spanning tree with the minimum cost among all spanning trees. This method can be used to optimize the seabed pipe network system and give a minimum cost plan for the development of offshore marginal oilfield groups.

Pressure-Dependent Models in Ship Piping Systems

This paper aims to evaluate the feasibility of pressure-dependent models in the design of ship piping systems.For this purpose,a complex ship piping system is designed to operate in firefighting and bilge services through jet pumps.The system is solved as pressure-dependent model by the piping system analysis software EPANET and by a mathematical approach involving a piping network model.This results in a functional system that guarantees the recommendable ranges of hydraulic state variables(flow and pressure)and compliance with the rules of ship classification societies.Through this research,the suitability and viability of pressure-dependent models in the simulation of a ship piping system are proven.

An Active Control Study of the 1Cr18Ni9 Steel Plate Multipoint Excitation

A multipoint excitation experiment system of the 1Cr18Ni9 steel plate-pipe network as the main vibration body was established,which used transient flow produced by the wave exciter to excite the 1Cr18Ni9 steel plate-pipe network to vibrate.The experimental results show that the 1Cr18Ni9 steel plate vibrates in three dimensions.The vibrations of the particles of the steel plate distributing along the pipe＇s axial have phase differences and take place near the cylinder side first.Therefore,it is a multipoint vibration mode.The amplitude of the 1Cr18Ni9 steel plate increases as the system pressure increases and decreases as the wave exciter＇s frequency decreases.The vibration intensity of the particles of the 1Cr18Ni9 steel plate close to the cylinder is the strongest and the amplitude is the highest in Y direction at a given system frequency.The vibration intensity of the particles close to the wave exciter is the strongest and the amplitude is the smallest in Z direction at a given system pressure.

Study on the Whole Process Simulation and Regulation Mechanism of Urban Green Ecological Rainwater Drainage System

In view of the frequent waterlogging caused by rapid urbanization and the public’s dissatisfaction with the drainage system,the article based on the concept of the green ecological drainage system,constructed the urban green ecological drainage comprehensive simulation research system,and quickly evaluated pipe network operation and surface water of an industrial park under typical rainfall conditions.The results showed that the drainage capacity of the designed green ecological rainwater drainage system reached 100%,and there was no ponding phenomenon,which indicated that the green ecological rainwater drainage system could effectively solve the practical problems of urban drainage.The green ecological rainwater comprehensive simulation research system had good adaptability.The research results provided the scientific theoretical basis and reference significance for planning,designing,constructing,operating,and managing urban rainwater system scientifically and systematically.

Experimental study on f-ω regulation model under abnormal methane emission

In view of the difficulty of automatic adjustment, the recovery lag and the major accident potential of the mine ventilation system, an experimental model of the pipe net was established according to the typical one mine and one working face ventilation system of Daliuta coal mine. Using the best uniform approximation method of Chebyshev interpolation to fit the fan performance curve, we experimentally determined fan characteristics with different frequencies and establish the data base for the curves. Based on ventilation network monitoring theory, we designed a monitoring system for ventilation network parameter monitoring and fan operating frequency automatic control. Using the absolute methane emission quantity to predict the air quantity requirement of branch and fan frequency, we established a f-ω regulation model based on fan frequency and absolute methane emission quantity. After analysing methane emission and distribution characteristics, using CO_2 to simulate the methane emission characteristics from a working face, we verified the correctness and rationality of the f-ω regulation model. The fan operation frequency is adjusted by the method of air adjustment change with methane emission quantity and the curve searching method after determining air quantity requirements. The results show that the air quantity in a branch strictly changes according to the f-ω regulation model, in the airincreasing dilution by fan frequency regulation, the CO_2 concentration is limited to the set threshold value. The paper verifies the practicability of a frequency regulation system and the feasibility of the frequency adjustment scheme and provides guidance for the construction of automatic frequency conversion control system in coal mine ventilation networks.

Effectiveness of Several Metaheuristic Methods to Analyze Hydraulic Parameters in a Drinking Water Distribution Network

<div style="text-align:justify;"> <span style="font-family:Verdana;">The reliability and ease of applying metaheuristic methods in solving large and complex equation systems make it interesting to be applied as an alternative solution to solving problems in various fields. This article proves the effectiveness of an optimization model based on the <span style="font-family:Verdana;">m<span style="font-family:Verdana;">etaheuristic method for the analysis of hydraulic parameters of drinking water distribution pipes. The metaheuristic methods explored are Differential Evolution (DE) algorithm, Particle Swam Optimization (PSO) algorithm and CODEQ algorithm. The effectiveness of the three methods is measured relative by comparing the results of the analysis of the three models with the results from Newton Raphson method and Monte Carlo simulation method. The analysis shows that the optimization model based on the DE, PSO and CODEQ algorithms is very effective for solving problems on a simple network that has 6 pipe elements and 5 service nodes. The results obtained have a level of accuracy as good as Newton Raphson method. In the case of complex networks that have 32 pipe elements and 21 service nodes, there is an indication of performance degradation which is indicated by a decrease in fitness value. In this case, Newton Raphson method still shows its consistency. The optimization model based on the metaheuristic method is still far more effective than the Monte Carlo simulation method, although it is not as effective as Newton Raphson method. The Monte Carlo simulation method is not recommended for hydraulic pipe network analysis, even for simple networks.

FREQUENCY DOMAIN ANALYSIS AND COMPUTER SIMULATION OF PRESSUREPULSATION RESONANCE IN HIGHPRESSURE PIPI

The characteristics of the pressure pulsation resonance in HP fluid piping networks have been researched by means of computer simulation. It can be used as an auxiliary means to acquaint the effects of the structural parameters of complex fluid pipelines. It has provided the basis for reasonably configurating pipelines and avoiding the pressure pulsation resonance in fluid pipelines. It is of great applied value to engineering.

ACCURATE PIPE TOP-ENTRY JUNCTION MODEL FOR STEADY AND UNSTEADY FLOWS

Experiments were conducted to determine the steady-flow characteristics of a variety of top-entry junctions. The observed steady flow relationships are then incorporated into the finite difference of characteristics to simulate the unsteady flow behavior at pipe junctions. Tests under unsteady flow conditions were further carried out and it was consequently clarified that numerical model is capable of accurately predicting flow characteristics in realistic drainage networks.

Hydraulic model for multi-sources reclaimed water pipe network based on EPANET and its applications in Beijing, China

Water shortage is one of the major water related problems for many cities in the world.The planning for utilization of reclaimed water has been or would be drafted in these cities.For using the reclaimed water soundly,Beijing planned to build a large scale reclaimed water pipe networks with multi-sources.In order to support the plan,the integrated hydraulic model of planning pipe network was developed based on EPANET supported by geographic information system(GIS).The complicated pipe network was divided into four weak conjunction subzones according to the distribution of reclaimed water plants and the elevation.It could provide a better solution for the problem of overhigh pressure in several regions of the network.Through the scenarios analy-sis in different subzones,some of the initial diameter of pipes in the network was adjusted.At last the pipe network planning scheme of reclaimed water was proposed.The proposed planning scheme could reach the balances between reclaimed water requirements and reclaimed water supplies,and provided a scientific basis for the reclaimed water utilization in Beijing.Now the scheme had been adopted by Beijing municipal government.

RS-SVM Machine Learning Approach Driven by Case Data for Selecting Urban Drainage Network Restoration Scheme

Urban drainage pipe network is the backbone of urban drainage,flood control and water pollution prevention,and is also an essential symbol to measure the level of urban modernization.A large number of underground drainage pipe networks in aged urban areas have been laid for a long time and have reached or practically reached the service age.The repair of drainage pipe networks has attracted extensive attention from all walks of life.Since the Ministry of ecological environment and the national development and Reform Commission jointly issued the action plan for the Yangtze River Protection and restoration in 2019,various provinces in the Yangtze River Basin,such as Anhui,Jiangxi and Hunan,have extensively carried out PPp projects for urban pipeline restoration,in order to improve the quality and efficiency of sewage treatment.Based on the management practice of urban pipe network restoration project in Wuhu City,Anhui Province,this paper analyzes the problems of lengthy construction period and repeated operation caused by the mismatch between the design schedule of the restoration scheme and the construction schedule of the pipe network restoration in the existing project management mode,and proposes a model of urban drainage pipe network restoration scheme selection based on the improved support vector machine.The validity and feasibility of the model are analyzed and verified by collecting the data in the project practice.The research results show that the model has a favorable effect on the selection of urban drainage pipeline restoration schemes,and its accuracy can reach 90%.The research results can provide method guidance and technical support for the rapid decision-making of urban drainage pipeline restoration projects.