CHARACTERISTICS OF CATION—CONDUCTIVE BLENDS PLASTICIZED WITH PROPYLENE CARBONATE

The cation—conductive blends plasticized with propylene carbonate were prepared. The blends exhibited good mechanical strength and single—cation conduction over a wide range of plasticizer composition. The plasticizer not only increases the conductivity of the blends but also decreases the electrochemical interface resistance between the blend and lithium electrode. The carrier in the blends obviously grows in number.

Microcellular Foaming of Plasticized Thin PC Sheet I.Effects of Processing Conditions

Novel microcellular foams using thin plasticized PC sheet were prepared by compression molding. The measurement results showed that T of plasticized PC was decreased and the molecular chain mobility was increased. Decrease in T and increase in chains mobility were contributed to the widen of foaming temperature window. Effects of processing conditions on cell size, cell density and relative density were also investigated. The experimental results show that the temperature, tributyl citrate and foaming agent content have more effects on the structures and morphology of the plasticized PC microcellular foam. Effects of experimental conditions on cell size distribution have also been discussed.

Irradiation Effect on Photodegradation of Pure and Plasticized Poly (4-Methylstyrene) in Solid Films

The photodegradation of irradiated thin films of poly (para-methylstyrene) with 265 nm radiations in the presence of airand as a function of irradiation time has been studied using UV-VIS, fluorescence and FT-IR Spectroscopic techniques. The influence of phthalate and terephthalate plasticizers on stability of poly (para-methylstyrene) towards irradiations was also investigated. Blending with phthalate plasticizers was found to cause a higher efficiency of photodegradation than that obtained in doping with terephthalate plasticizers. The intensity of absorption was also found to increase with time of irradiation and in change in the shape of the spectra at longer wavelength, thus indicating a possibility of photodegradation of polymer chains. The analysis of the FT-IR spectra of the irradiated and non-irradiated samples, shows a predominant absorption associated with carbonyl compounds with 1740 cm-1. In addition, the observed increase in the intensities of the carbonyl and hydroxyl regions of the FT-IR spectra, have provided an evidence for the photodegradation as well as photo-oxidation of polymeric chains. The presence of the plasticizer in the polymer backbone was found to accelerate the photodegradation of polymeric chains.

Rheological Studies on Glycerol Plasticized Gelatin and Its Blends with Epoxidized Soybean Oil

Blends of gelatin(Ge)plasticized with varying amounts of glycerol(Gly),buffer solution pH 10 and epoxidized soybean oil(ESO)to enhance hydrophobicity were prepared by mixing and injection-molding.Blends were characterized by rheological tests and microscopy to select optimal conditions for scaling up their processing.The effect of each component on rheological response was analyzed using parallel plate geometry.Coating of gelatin specimens with PDMS during rheological tests led to reliable and reproducible results since water evaporation was prevented.A gradual increment in ESO concentration led to blends with increased degree of phase separation,as evidenced by optical and confocal microscopy.Limited compatibility between ESO and Ge increased viscosity at high ESO levels,but up to 10%Gly could be replaced with ESO without a significant variation of rheological behavior.

Study the Influence of UV-Irradiation on the Photo Stability of Pure and Plasticized Poly (4-Vinyl Biphenyl) in Solid Films

The effect of UV irradiation and blending with phthalate and terephthalate plasticizers on the photo-stability of Poly (4-vinyl biphenyl) was studied at different intervals of irradiation time and in presence of air. The increase in irradiation time on the photodegradation of polymer thin films caused a change in the intensity and shape of the fluorescence band. It has been found that the stability of the polymer decreases with the increase of irradiation time, and to increases with the increase of the amount of added phthalate and terephthalate plasticizers, which is evidence of polymer photodegradation. The FT-IR spectra of irradiated pure and blended polymer with phthalate and terephthalate plasticizers showed a decrease in some absorption bands and increase in the other bands, this is also another factor for the occurrence of photo degradation of the irradiated polymer. The increase in the intensity of absorption of carbonyl and hydroxyl region, indicates a possible photogegradation of polymeric chains and the formation of alcohols, aliphatic ketones and to the increase in the number of (C=C) that resulted from hydrogen abstraction during chains-scission.

Chain Dynamics Heterogeneity in Plasticized Poly(vinyl butyral)(PVB) as Elucidated by Solid-State NMR

The chain dynamics heterogeneity of the poly(vinyl butyral)(PVB) plasticized by triethylene glycol bis(2-ethylhexa noate)(TEG-EH) was investigated by various solid-state NMR techniques.The plasticized PVB shows two domains in distinct molecular dynamics differences,namely,rigid and soft domains,where the latter is the plasticizer-rich domain.The time domain low field NMR was first used to investigate the dynamics heterogeneity of the plasticized PVB,and the results show the decreasing activated energy of components in the soft domain of plasticized PVB(E_a=20.2 kJ/mol) as compared with that of the pristine one(E_a=24.3 kJ/mol).Detailed dynamics heterogeneity was obtained by high-field NMR with site-specific features.The quadrupole-echo ~2H-NMR was adopted to elucidate the dynamics heterogeneity of the vinyl alcohol(VA) units,where only the hydroxyl group of VA is deuterated.The ~1H-^(13)C WISE NMR spectra show that there is not much difference in the mobility of the VB unit in PVB with and without plasticizer,whereas the glass transition temperature differed by approximately 53℃.This is further supported by Torchia's T_1 relaxation measurements.The origin of such an unusual phenomenon is attributed to the critical role of the remaining VA(~22%) in the soft domain,where the VA units locally aggregate through hydrogen bonding.Also,the existence of a mobility gradient in the VB unit has been demonstrated.Moreover,the mobility difference for VB with different stereo-geometry(meso or racemic conformation) is observed for the first time.This indicates the importance of modulating the ratio of meso over racemic VB for controlling the macroscopic perfo rmance of PVB.

Recent developments of anti-plasticized membranes for aggressive CO_(2)separation

Membrane separation technology provides an effective alternative to mitigate the massive carbon emission with high carbon capture productivity and efficiency.In the context of operating membranes under high CO_(2)pressures allows increased separation productivity and reduced gas compression cost,which,however,often leads to CO_(2)induced plasticization,a key hurdle for current gas separation membranes.In this review,we reviewed the latest development of membranes with anti-plasticization resistance,potentially suited for operation under high CO_(2)feed streams.Specifically,the separation performance of polymeric membranes,inorganic membranes,and mixed matrix membranes under high CO_(2)feed pressures are discussed.Approaches to enhance CO_(2)induced plasticization of those membranes are also summarized.We conclude the recent progress of membranes for high CO_(2)pressures with perspectives and an outlook for future development.

Neural stem cells promote neuroplasticity: a promising therapeutic strategy for the treatment of Alzheimer’s disease

Recent studies have demonstrated that neuroplasticity,such as synaptic plasticity and neurogenesis,exists throughout the normal lifespan but declines with age and is significantly impaired in individuals with Alzheimer’s disease.Hence,promoting neuroplasticity may represent an effective strategy with which Alzheimer’s disease can be alleviated.Due to their significant ability to self-renew,differentiate,and migrate,neural stem cells play an essential role in reversing synaptic and neuronal damage,reducing the pathology of Alzheimer’s disease,including amyloid-β,tau protein,and neuroinflammation,and secreting neurotrophic factors and growth factors that are related to plasticity.These events can promote synaptic plasticity and neurogenesis to repair the microenvironment of the mammalian brain.Consequently,neural stem cells are considered to represent a potential regenerative therapy with which to improve Alzheimer’s disease and other neurodegenerative diseases.In this review,we discuss how neural stem cells regulate neuroplasticity and optimize their effects to enhance their potential for treating Alzheimer’s disease in the clinic.

Experimental,Numerical,and Analytical Studies on the Bending of Mechanically Lined Pipe

Mechanically lined pipe(MLP)is often used for offshore oil and gas transport because of its low cost and corrosion resistance.During installation and operation,the pipe may undergo severe bending deformation,which causes the liner to separate from the outer pipe and buckles,affecting the stability of the whole line.In this paper,the buckling response of MLP subjected to bending is investigated to clarify its bending characteristics by employing both experiments,numerical simulation,as theoretical methods.Two types of MLPs were manufactured with GB 45 carbon steel(SLP)and Al 6061(ALP)used as the outer pipe material,respectively.The hydraulic expansion and bending experiments of small-scale MLPs are conducted.In addition to the ovalized shape of the cross-section for the SLP specimens,the copper liner was found to wrinkle on the compressive side.In contrast,the liner of ALP remains intact without developing any wrinkling and collapse mode.In addition,a dedicated numerical framework and theoretical models were also established.It was found both the manufacturing and bending responses of the MLP can be well reproduced,and the predicted maximum moment and critical curvatures are in good agreement with the experimental results.

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading condition.This characteristic results in a diverse range of flow curves that vary with a deformation condition.This study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data augmentation.The developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)architecture.The proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset size.The model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading directions.The GAN-aided GRU results were superior to those of previous ML models and constitutive equations.The superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for extrapolation.As a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

Exercise-with-melatonin therapy improves sleep disorder and motor dysfunction in a rat model of ischemic stroke

Exercise-with-melatonin therapy has complementary and synergistic effects on spinal cord injury and Alzheimer's disease,but its effect on stroke is still poorly understood.In this study,we established a rat model of ischemic stroke by occluding the middle cerebral artery for 60 minutes.We treated the rats with exercise and melatonin therapy for 7 consecutive days.Results showed that exercise-with-melatonin therapy significantly prolonged sleep duration in the model rats,increased delta power values,and regularized delta power rhythm.Additionally,exercise-with-melatonin therapy improved coordination,endurance,and grip strength,as well as learning and memory abilities.At the same time,it led to higher hippocampal CA1 neuron activity and postsynaptic density thickness and lower expression of glutamate receptor 2 than did exercise or melatonin therapy alone.These findings suggest that exercise-withmelatonin therapy can alleviate sleep disorder and motor dysfunction by increasing glutamate receptor 2 protein expression and regulating hippocampal CA1 synaptic plasticity.

Upcycling plastic wastes into value-added products via electrocatalysis and photoelectrocatalysis

Plastic,renowned for its versatility,durability,and cost-effectiveness,is indispensable in modern society.Nevertheless,the annual production of nearly 400 million tons of plastic,coupled with a recycling rate of only 9%,has led to a monumental environmental crisis.Plastic recycling has emerged as a vital response to this crisis,offering sustainable solutions to mitigate its environmental impact.Among these recycling efforts,plastic upcycling has garnered attention,which elevates discarded plastics into higher-value products.Here,electrocatalytic and photoelectrocatalytic treatments stand at the forefront of advanced plastic upcycling.Electrocatalytic or photoelectrocatalytic treatments involve chemical reactions that facilitate electron transfer through the electrode/electrolyte interface,driven by electrical or solar energy,respectively.These methods enable precise control of chemical reactions,harnessing potential,current density,or light to yield valuable chemical products.This review explores recent progress in plastic upcycling through electrocatalytic and photoelectrocatalytic pathways,offering promising solutions to the plastic waste crisis and advancing sustainability in the plastics industry.

Dopamine in the prefrontal cortex plays multiple roles in the executive function of patients with Parkinson's disease

Parkinson’s disease can affect not only motor functions but also cognitive abilities,leading to cognitive impairment.One common issue in Parkinson’s disease with cognitive dysfunction is the difficulty in executive functioning.Executive functions help us plan,organize,and control our actions based on our goals.The brain area responsible for executive functions is called the prefrontal co rtex.It acts as the command center for the brain,especially when it comes to regulating executive functions.The role of the prefrontal cortex in cognitive processes is influenced by a chemical messenger called dopamine.However,little is known about how dopamine affects the cognitive functions of patients with Parkinson’s disease.In this article,the authors review the latest research on this topic.They start by looking at how the dopaminergic syste m,is alte red in Parkinson’s disease with executive dysfunction.Then,they explore how these changes in dopamine impact the synaptic structure,electrical activity,and connection components of the prefrontal cortex.The authors also summarize the relationship between Parkinson’s disease and dopamine-related cognitive issues.This information may offer valuable insights and directions for further research and improvement in the clinical treatment of cognitive impairment in Parkinson’s disease.

The first factor affecting dryland winter wheat grain yield under various mulching measures: Spike number

Water is the key factor limiting dryland wheat grain yield.Mulching affects crop yield and yield components by affecting soil moisture.Further research is needed to determine the relationships between yield components and soil moisture with yield,and to identify the most important factor affecting grain yield under various mulching measures.A long-term 9-yearifeld experiment in the Loess Plateau of Northwest China was carried out with three treatments:no mulch (CK),plastic mulch (M_(P)) and straw mulch (M_(S)).Yield factors and soil moisture were measured,and the relationships between them were explored by correlation analysis,structural equation modeling and significance analysis.The results showed that compared with CK,the average grain yields of M_(P) and M_(S) increased by 13.0and 10.6%,respectively.The average annual grain yield of the M_(P) treatment was 134 kg ha^(–1) higher than the M_(S) treatment.There were no significant differences in yield components among the three treatments (P<0.05).Soil water storage of the M_(S) treatment was greater than the M_(P) treatment,although the differences were not statistically signifiant.Soil water storage during the summer fallow period (SWSSF) and soil water storage before sowing (SWSS) of M_(S) were significantly higher than in CK,which increased by 38.5 and 13.6%,respectively.The relationship between M_(P) and CK was not statistically significant for SWSSF,but the SWSS in M_(P) was significantly higher than in CK.In terms of soil water storage after harvest (SWSH) and water consumption in the growth period(ET),there were no signi?cant differences among the three treatments.Based on the three analysis methods,we found that spike number and ET were positively correlated with grain yield.However,the relative importance of spike number to yield was the greatest in the M_(P )and M_(S) treatments,while that of ET was the greatest in CK.Suifcient SWSSF could indirectly increase spike number and ET in the three treatments.Based on these results,mulch can improve yield and soil water storage.The most important factor affecting the grain yield of dryland wheat was spike number under mulching,and ET with CK.These findings may help us to understand the main factors influencing dryland wheat grain yield under mulching conditions compared to CK.

Efficacy of exercise rehabilitation for managing patients with Alzheimer's disease

Alzheimer's disease(AD) is a progressive and degenerative neurological disease characterized by the deterioration of cognitive functions. While a definitive cure and optimal medication to impede disease progression are currently unavailable, a plethora of studies have highlighted the potential advantages of exercise rehabilitation for managing this condition. Those studies show that exercise rehabilitation can enhance cognitive function and improve the quality of life for individuals affected by AD. Therefore, exercise rehabilitation has been regarded as one of the most important strategies for managing patients with AD. Herein, we provide a comprehensive analysis of the currently available findings on exercise rehabilitation in patients with AD, with a focus on the exercise types which have shown efficacy when implemented alone or combined with other treatment methods, as well as the potential mechanisms underlying these positive effects. Specifically, we explain how exercise may improve the brain microenvironment and neuronal plasticity. In conclusion, exercise is a cost-effective intervention to enhance cognitive performance and improve quality of life in patients with mild to moderate cognitive dysfunction. Therefore, it can potentially become both a physical activity and a tailored intervention. This review may aid the development of more effective and individualized treatment strategies to address the challenges imposed by this debilitating disease, especially in low-and middle-income countries.

3'-Deoxyadenosin alleviates methamphetamine-induced aberrant synaptic plasticity and seeking behavior by inhibiting the NLRP3 inflammasome

Methamphetamine addiction is a brain disorder characterized by persistent drug-seeking behavior, which has been linked with aberrant synaptic plasticity. An increasing body of evidence suggests that aberrant synaptic plasticity is associated with the activation of the NOD-like receptor family pyrin domain containing-3(NLRP3) inflammasome. 3′-Deoxyadenosin, an active component of the Chinese fungus Cordyceps militaris, has strong anti-inflammatory effects. However, whether 3′-deoxyadenosin attenuates methamphetamine-induced aberrant synaptic plasticity via an NLRP3-mediated inflammatory mechanism remains unclear. We first observed that 3′-deoxyadenosin attenuated conditioned place preference scores in methamphetamine-treated mice and decreased the expression of c-fos in hippocampal neurons. Furthermore, we found that 3′-deoxyadenosin reduced the aberrant potentiation of glutamatergic transmission and restored the methamphetamine-induced impairment of synaptic plasticity. We also found that 3′-deoxyadenosin decreased the expression of NLRP3 and neuronal injury. Importantly, a direct NLRP3 deficiency reduced methamphetamine-induced seeking behavior, attenuated the impaired synaptic plasticity, and prevented neuronal damage. Finally, NLRP3 activation reversed the effect of 3′-deoxyadenosin on behavior and synaptic plasticity, suggesting that the anti-neuroinflammatory mechanism of 3′-deoxyadenosin on aberrant synaptic plasticity reduces methamphetamine-induced seeking behavior. Taken together, 3′-deoxyadenosin alleviates methamphetamine-induced aberrant synaptic plasticity and seeking behavior by inhibiting the NLRP3 inflammasome.

Lymphatic plastic bronchitis and primary chylothorax: A study based on computed tomography lymphangiography

BACKGROUND This study presents an evaluation of the computed tomography lymphangio-graphy(CTL)features of lymphatic plastic bronchitis(PB)and primary chylotho-rax to improve the diagnostic accuracy for these two diseases.AIM To improve the diagnosis of lymphatic PB or primary chylothorax,a retrospective analysis of the clinical features and CTL characteristics of 71 patients diagnosed with lymphatic PB or primary chylothorax was performed.METHODS The clinical and CTL data of 71 patients(20 with lymphatic PB,41 with primary chylothorax,and 10 with lymphatic PB with primary chylothorax)were collected retrospectively.CTL was performed in all patients.The clinical manifestations,CTL findings,and conventional chest CT findings of the three groups of patients were compared.The chi-square test or Fisher's exact test was used to compare the differences among the three groups.A difference was considered to be statistically significant when P<0.05.RESULTS(1)The percentages of abnormal contrast medium deposits on CTL in the three groups were as follows:Thoracic duct outlet in 14(70.0%),33(80.5%)and 8(80.0%)patients;peritracheal region in 18(90.0%),15(36.6%)and 8(80.0%)patients;pleura in 6(30.0%),33(80.5%)and 9(90.0%)patients;pericardium in 6(30.0%),6(14.6%)and 4(40.0%)patients;and hilum in 16(80.0%),11(26.8%)and 7(70.0%)patients;and(2)the abnormalities on conven-tional chest CT in the three groups were as follows:Ground-glass opacity in 19(95.0%),18(43.9%)and 8(80.0%)patients;atelectasis in 4(20.0%),26(63.4%)and 7(70.0%)patients;interlobular septal thickening in 12(60.0%),11(26.8%)and 3(30.0%)patients;bronchovascular bundle thickening in 14(70.0%),6(14.6%)and 4(40.0%)patients;localized mediastinal changes in 14(70.0%),14(34.1%),and 7(70.0%)patients;diffuse mediastinal changes in 6(30.0%),5(12.2%),and 3(30.0%)patients;cystic lesions in the axilla in 2(10.0%),6(14.6%),and 2(20.0%)patients;and cystic lesions in the chest wall in 0(0%),2(4.9%),and 2(4.9%)patients.CONCLUSION CTL is well suited to clarify the characteristics of lymphatic PB and primary chylothorax.This method is an excellent tool for diagnosing these two diseases.

Fat management in upper blepharoplasty:Addition or subtraction blepharoplasties,how and when

BACKGROUND As one of the most common aesthetic surgical procedures carried out today,blepharoplasty should be in the repertoire of every plastic surgeon.The term blepharoplasty encompasses a wide range of techniques and options that must be tailored to the specific defect and patient one has to treat.A sound knowledge of the upper and lower eyelids’anatomy is essential for proper surgical execution.Trends have shifted towards more conservative methods(especially of the fat compartment)and sometimes in combination with augmentation techniques,helping to reach a rejuvenated appearance.AIM To present an overview of the surgical techniques considered for upper lid blepharoplasty and fat pad management,in addition to information on how a surgeon may approach the best treatment for his patient based on current publications in literature.METHODS We searched the literature published between 2013,to 2023 using Medline and Reference Citation Analysis.The database was searched using the keywords“upper blepharoplasty”AND“fat”.Papers without full text/abstracts and reviews were excluded.The search strategy followed the PRISMA.The American Society of Plastic Surgeons guidelines for Therapeutic Studies checklist was used to assess all articles.Two authors individually reviewed each article and rated them for importance and relevance to the topic.A consensus was sought and the most relevant studies.RESULTS After the application of the selection criteria used in our review,13 publications were found to address upper lid blepharoplasty specifically.Three of these studies were reviews and three were retrospective studies.Five publications were comparative studies and a further two were clinical trials.CONCLUSION The tendency of modern surgery is to be conservative,by removing adipose tissue only if strictly necessary and restoring the volume of the upper eyelid in a concept of beauty that espouses a"full"sight.There is no gold standard technique to achieve younger and enhanced eyelids.Long-term prospective comparative studies are fundamental in understanding which path is the best to follow.

Combustion of nitrate ester plasticized polyether propellants

Nitrate ester plasticized polyether(NEPE)is a kind of high-energy solid propellant that has both good mechanical properties and high specific impulse.However,its unique composition makes its combustion mechanism different from both double-base propellants and composite propellants.In order to study the combustion mechanism of NEPE propellants,we improved the free radical cracking model of previous research to make it capable of predicting the burning rate of NEPE propellants.To study the combustion characteristics and provide data support for the model,an experimental system was built and four kinds of NEPE propellants with different compositions and grain size distributions were tested.The results show that our modified model can reflect the combustion characteristics of NEPE propellants with an acceptable accuracy.The difference between the model and the experimental data is mainly caused by uncertain environmental factors and the ignorance of interactions between components.Both the experimental data and the results predicted by the model show that increasing the backpressure helps to increase the burning rate of NEPE propellants.Furthermore,the grain size of the oxidizer inside the NEPE propellant has a more severe impact on the burning rate but a lighter impact on the burning rate pressure exponent in comparison with the grain size of aluminum.For aluminum-free NEPE propellants,the reaction in the gas phase is dominant in the combustion process while adding aluminum into the propellant makes the solid phase dominant in the final stage.The combustion of fine aluminum particles near the burning surface generates heat feedback to the burning surface which evidently influences the surface temperature.However,the agglomeration of coarse aluminum particles has little effect on the burning surface temperature.

Recent Advance in Synaptic Plasticity Modulation Techniques for Neuromorphic Applications

Manipulating the expression of synaptic plasticity of neuromorphic devices provides fascinating opportunities to develop hardware platforms for artifi-cial intelligence.However,great efforts have been devoted to exploring biomimetic mechanisms of plasticity simulation in the last few years.Recent progress in various plasticity modulation techniques has pushed the research of synaptic electronics from static plasticity simulation to dynamic plasticity modulation,improving the accuracy of neuromorphic computing and providing strategies for implementing neuromorphic sensing functions.Herein,several fascinating strategies for synap-tic plasticity modulation through chemical techniques,device structure design,and physical signal sensing are reviewed.For chemical techniques,the underly-ing mechanisms for the modification of functional materials were clarified and its effect on the expression of synaptic plasticity was also highlighted.Based on device structure design,the reconfigurable operation of neuromorphic devices was well demonstrated to achieve programmable neuromorphic functions.Besides,integrating the sensory units with neuromorphic processing circuits paved a new way to achieve human-like intelligent perception under the modulation of physical signals such as light,strain,and temperature.Finally,considering that the relevant technology is still in the basic exploration stage,some prospects or development suggestions are put forward to promote the development of neuromorphic devices.