The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron or...The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.展开更多
The Xingluokeng deposit is the largest gran-ite-related tungsten deposit within the Wuyi metallogenic belt in South China.The Xingluokeng intrusion primarily consists of porphyritic biotite granite,biotite granite,and...The Xingluokeng deposit is the largest gran-ite-related tungsten deposit within the Wuyi metallogenic belt in South China.The Xingluokeng intrusion primarily consists of porphyritic biotite granite,biotite granite,andfine-grained granite.The deposit is represented by veinlet-disseminated mineralization with K-feldspathization and biotitization,alongside quartz-vein mineralization with gre-isenization and sericitization.This study investigates in-situ analyses of quartz compositions from both the intrusion and hydrothermal veinlets and veins.Trace element correlations indicate that trivalent Al^(3+)and Fe^(3+)replace Si^(4+)within the quartz lattice,with monovalent cations(such as Li^(+),Na^(+),and K^(+))primarily serving as charge compensators.Low Ge/Al ratios(<0.013)of quartz from granites suggest a mag-matic origin.The low Al/Ti and Ge/Ti ratios,accompanied by high Ti contents in quartz,suggest that the porphyritic biotite granite and biotite granite are characterized by rela-tively low levels of differentiation and high crystallization temperatures.In contrast,thefine-grained granite exhibits a higher degree of fractionation,lower crystallization tem-peratures,and a closer association with tungsten miner-alization.Ti contents in quartz from quartz veins indicate Qz-Ⅰformed at temperatures above 400°C,while Qz-Ⅱto Qz-Ⅴformed at temperatures below 350°C.Variations in different generations of quartz,as indicated by Al content and(Al+Fe)/(Li+Na+K)ratio,suggest that Qz-Ⅰprecipi-tated from a less acidicfluid with a stable pH,whereas Qz-Ⅱto Qz-Ⅴoriginated from a more acidicfluid with notable pH variations.Consequently,alkaline alteration and acidic alteration supplied the essential Ca and Fe for the precipita-tion of scheelite and wolframite,respectively,highlighting a critical mechanism in tungsten mineralization at the Xin-gluokeng deposit.展开更多
A highly sensitive light-induced thermoelectric spectroscopy(LITES)sensor based on a multi-pass cell(MPC)with dense spot pattern and a novel quartz tuning fork(QTF)with low resonance frequency is reported in this manu...A highly sensitive light-induced thermoelectric spectroscopy(LITES)sensor based on a multi-pass cell(MPC)with dense spot pattern and a novel quartz tuning fork(QTF)with low resonance frequency is reported in this manuscript.An erbi-um-doped fiber amplifier(EDFA)was employed to amplify the output optical power so that the signal level was further enhanced.The optical path length(OPL)and the ratio of optical path length to volume(RLV)of the MPC is 37.7 m and 13.8 cm^(-2),respectively.A commercial QTF and a self-designed trapezoidal-tip QTF with low frequency of 9461.83 Hz were used as the detectors of the sensor,respectively.The target gas selected to test the performance of the system was acetylene(C2H2).When the optical power was constant at 1000 mW,the minimum detection limit(MDL)of the C2H2-LITES sensor can be achieved 48.3 ppb when using the commercial QTF and 24.6 ppb when using the trapezoid-al-tip QTF.An improvement of the detection performance by a factor of 1.96 was achieved after replacing the commer-cial QTF with the trapezoidal-tip QTF.展开更多
To enhance the performance of traditional cationic collector,a novel polyhydroxy amine collector N-(2,3-Propanediol)-N-dodecylamine(PDDA)was designed by introducing one propylene glycol group into dodecylamine(DDA).It...To enhance the performance of traditional cationic collector,a novel polyhydroxy amine collector N-(2,3-Propanediol)-N-dodecylamine(PDDA)was designed by introducing one propylene glycol group into dodecylamine(DDA).It was prepared by a nucleophilic substitution reaction,which showed better solubility and hydrophobicity than DDA and was firstly employed as the collector for the separation of hematite and quartz.Flotation tests showed that PDDA had an excellent flotation performance and significantly better selectivity than DDA.In addition,the flotation performance and adsorption mechanism of PDDA on hematite and quartz surfaces were studied using Fourier transform infrared spectroscopy(FTIR),zeta potential and X-ray photoelectron spectroscopy(XPS)tests.These results demonstrated that the interaction between PDDA and the minerals’surfaces was mainly electrostatic adsorption and hydrogen bond,while PDDA tended to adsorb on the surfaces of quartz more than that of hematite.Performance optimization of amine collectors by introducing hydroxyl was also verified,which was of great meaning to the design,development,and application of the polyhydroxy cationic collector.In conclusion,PDDA could be used as a potential collector in the flotation separation of quartz and hematite.展开更多
The Bangbule skarn lead-zinc(Pb-Zn)deposit(>1 Mt Zn+Pb)is located in the western Nyainqentanglha polymetallic metallogenetic belt,central Tibet.Lenticular orebodies are all hosted in skarn and developed in the cont...The Bangbule skarn lead-zinc(Pb-Zn)deposit(>1 Mt Zn+Pb)is located in the western Nyainqentanglha polymetallic metallogenetic belt,central Tibet.Lenticular orebodies are all hosted in skarn and developed in the contact zone between the quartz porphyry and carbonate strata of the mid Paleozoic Middle to Upper Chaguoluoma Formation as well as in carbonate and sandstone beds of the Upper Paleozoic Laga Formation.As a newly discovered skarn deposit,the geological background and metallogenesis of this deposit remain poorly understood.Detailed petrological,geochemical and geochronological data of the ore-related quartz porphyry,helps constrain the mineralization age and contributes to discussion on the ore genesis of the Bangbule deposit.Both endoskarn and exoskarn are identified in the Bangbule deposit.From quartz porphyry to carbonate formation,the exoskarn is zoned from proximal garnet skarn to distal pyroxene skarn.Zircon U-Pb dating results show that the quartz porphyry formed at 73.9±0.8 Ma.Geochemical analysis results show that the quartz porphyry has high contents of SiO_(2)(71.40–74.94 wt%)and K_(2)O+Na_(2)O(3.76–8.46 wt%)with A/CNK values of 0.69 to 1.06.Besides,the quartz porphyry is enriched in large ion lithophile elements(LILEs)and light rare earth elements(LREEs)and have lowεNd(t)(from-8.25 to-8.19)and high initial(^(87)Sr/^(86)Sr)i values(0.713611–0.714478).Major,trace elements and whole-rock F concentration analysis results from the endoskarn samples show higher TFe_(2)O_(3),MgO,CaO,Pb+Zn,W,Sn,Mo and F etc.,and lower alkalis(K_(2)O,Na_(2)O,Sr and Ba)than those of fresh quartz porphyry,indicating that the early ore-forming fluids were an Ca-Fe-F-enriched fluid.Massive ore in the proximal skarn might be related to the high F content in the magma,which lowered the solidus temperature of the quartz porphyry magma and caused a lower temperature of the ore-forming fluids,as well as facilitating the precipitation of sphalerite and galena.Based on the geochemical characteristics presented in this study,we propose that the ore-related quartz porphyry was formed by partial melting of crust materials with some juvenile crustal component input.The partial melting of the middle-upper crust after the initial enrichment of lead and zinc elements are important for the formation of Pb-Zn deposits.The case study of the Bangbule deposit has proven that there is still a crust-derived magmatic source region in the western segment of the central Lhasa terrane.Therefore,there is still great potential for Pb-Zn mineralization and Pb-Zn exploration.展开更多
In the present work,the turbulent mixing process of a polydisperse quartz particle flow with a plasma stream generated by a radio-frequency(RF)inductively coupled plasma torch was numerically studied.The thermobaric s...In the present work,the turbulent mixing process of a polydisperse quartz particle flow with a plasma stream generated by a radio-frequency(RF)inductively coupled plasma torch was numerically studied.The thermobaric stress in the quartz particles under dynamic heating in a heterogeneous plasma flow was determined by a two-stage approximation approach.The effect of the presence of vacuoles in natural quartz on the particle thermobaric destruction conditions was studied.It was found that the equivalent thermal and baric stresses in quartz particles may significantly increase in the presence of vacuoles within a small gas volume fraction.The influence of the regime and energetic working conditions of an RF inductively coupled plasma torch system on the particle thermobaric destruction conditions was examined,and a recommendation was given to promote the degree of thermobaric destruction of quartz particles,which is of substantial importance for improving the overall enrichment efficiency of quartz concentrates.展开更多
Interest in the Côte d’Ivoire sedimentary basin has led to numerous investigations. All these investigations are aimed at understanding the functioning of the basin and a paleogeographic approach including sedim...Interest in the Côte d’Ivoire sedimentary basin has led to numerous investigations. All these investigations are aimed at understanding the functioning of the basin and a paleogeographic approach including sediment transport dynamics. However, the use of exoscopy and semi-quantitative mineralogy has been little developed. This study was carried out to compensate for this lack of interest in these methods. Its aim is to understand the transformation of quartz into hematite using exoscopy and semi-quantitative mineralogy in the Adiaké locality, in the eastern onshore basin of Côte d’Ivoire. Two methods were applied to 250 μm-diameter quartz grains from the 40 m coasts. Exoscopy provides information on microscopic texture, surface and corrosion, as well as determining the transport mechanism and deposition phases of quartz grains. Semi-quantitative mineralogy provides an estimate of the weight percentages of major element oxides and the ultrastructure of quartz grains. Exoscopy showed that these grains had been subjected to torrential fluvial transport. They were marked by mechanical and chemical traces during this transport and evolved in different environments. Semi-quantitative mineralogy shows the existence of negative and positive correlations between oxides. Negative correlations indicate a substitution, in order of importance, of silicon by iron, phosphorus and aluminum in these quartz. Positive correlations show that there is no substitution between the oxides concerned in these quartz grains. Divo’s quartz grains have recorded several mechanical and chemical microstructures of their sedimentary episodes, with the appearance of iron nodules in the ports left by silica.展开更多
We have built an atomic force microscope using a quartz tuning fork as sensor. The excitation method we adopted, the electrical excitation, introduces stray capacitance into the signal-processing circuit. In this repo...We have built an atomic force microscope using a quartz tuning fork as sensor. The excitation method we adopted, the electrical excitation, introduces stray capacitance into the signal-processing circuit. In this report, we demonstrated a simple but effective method to compensate for this parasitic capacitance by adding a compensator circuit consisting of an inverting amplifier and a capacitor. The capacitor is connected in series with the inverting amplifier and the compensator is connected in parallel with the quartz tuning fork. The resonance curve of the system measured after adding the homemade compensator resembles that of a pure RLC circuit, meaning that the stray capacitance is successfully eliminated. Furthermore, we tried to use our equipment to measure PDMS sample and got clean data. This system can be further combined with confocal microscope and diamond with NV defect to build scanning NV magnetometry.展开更多
<正>According to the piezoelectric equation and the vibration theory of the quartz crystal,the relations between the vibrating frequency and structural parameters under the thickness-shear-vibration of AT-cut qu...<正>According to the piezoelectric equation and the vibration theory of the quartz crystal,the relations between the vibrating frequency and structural parameters under the thickness-shear-vibration of AT-cut quartz crystal have been studied. The frequency conditions under which quartz crystal resonator formed stationary wave inside the electrode district and the transmission characteristics of wave outside the electrode district have also been discussed.A quartz crystal resonator was developed based on this analysis.The experiment showed that the force-sensing characteristics were independent of the fixation of the crystal edge.The detecting distinguish ability was up to 0.001°,and the short-term frequency stability was up to 1.38×10~ (-10)/min.展开更多
Fluid inclusions at a nano to sub-micron scale in quartz from jadeite quartzite at Shuanghe, Dabie Mountains, have been investigated by using the transmission electron microscopy (TEM). Most fluid inclusions are spher...Fluid inclusions at a nano to sub-micron scale in quartz from jadeite quartzite at Shuanghe, Dabie Mountains, have been investigated by using the transmission electron microscopy (TEM). Most fluid inclusions are spherical or negative crystal shaped, forming wide swarm-like trails. The TEM reveals that the relationship between coesite and the host quartz is syntaxic and provides strong evidence of the occurrence of high-salty fluids at peak metamorphic conditions. The fluid inclusions are often connected to dislocations, which are undetected at the scale of optical microscopy. Non-decrepitation leakage of fluid inclusions may occur by pipe diffusion of molecule H2O or CO2 along dislocations from the inclusions into the host quartz, thus leading to original inclusion density and composition changes. It should be taken into full account for the correct petrological interpretation of micro-thermometric results.展开更多
We present a new polymer quartz piezoelectric crystal sensor that takes a quartz piezoelectric crystal as the basal material and a nanometer nonmetallic polymer thin film as the surface coating based on the principle ...We present a new polymer quartz piezoelectric crystal sensor that takes a quartz piezoelectric crystal as the basal material and a nanometer nonmetallic polymer thin film as the surface coating based on the principle of quartz crystal microbalance (QCM). The new sensor can be used to detect the characteristic materials of a volatile liquid. A mechanical model of the new sensor was built, whose structure was a thin circle plate composing of polytef/quartz piezoelectric/polytef. The mechanical model had a diameter of 8 mm and a thickness of 170 ~tm. The vibration state of the model was simulated by software ANSYS after the physical parameters and the boundary condition of the new sensor were set. According to the results of experiments, we set up a frequency range from 9.995850 MHz to 9.997225 MHz, 17 kinds of frequencies and modes of vibration were obtained within this range. We found a special frequency fsp of 9.996358 MHz. When the resonant frequency of the new sensor's mechanical model reached the special frequency, a special phenomenon occurred. In this case, the amplitude of the center point O on the mechanical model reached the maximum value. At the same time, the minimum absolute difference between the simulated frequency based on the ANSYS software and the experimental measured stable frequency was reached. The research showed that the design of the new polymer quartz piezoelectric crystal sensor perfectly conforms to the principle of QCM. A special frequency value fsp was found and subsequently became one of the most important parameters in the new sensor design.展开更多
High-purity quartz (HPQ), the prime source of silica, is increasingly considered a strategic mineral in the world market because it is the raw material for special applications in high-tech industries owing to its uni...High-purity quartz (HPQ), the prime source of silica, is increasingly considered a strategic mineral in the world market because it is the raw material for special applications in high-tech industries owing to its unique physical and chemical properties. The expected growth in demand for HPQ implies that more sources have to be found. This is the primary motivation for this study which targets the Supe area, SW Region of Cameroon. The structural occurrences of quartz veins were mapped and samples collected. The chemical nature and textural features of these samples were subsequently analyzed by X-ray tomography, scanning electron microscopy (SEM), and electron microprobe analysis (EMPA). Three deformation events, D<sub>1</sub> - D<sub>3</sub> are recorded. D<sub>1</sub> is marked by the development of the strong S<sub>1</sub> foliation defined by the gneissic layering and schistosity. D<sub>2</sub> is a NE-SW ductile to brittle sinistral shear that controlled the formation of tension gashes that served as subsequent pathways for quartz-rich hydrothermal fluids to circulate and eventually precipitate quartz. The presence of rutile, tourmaline, and mica inclusions in the Supe veins affects the purity of the quartz. However, quartz can be treated to improve its quality. Taking into consideration the nine determinant trace elements used to classify HPQ, three (Li, P, and B) are below detection limits, Al concentrations are within the HPQ, quartz market standard, and average natural abundance;Ti values are high above all three standards in all except one sample, while Na, Ca, K, and Fe values fluctuate, thus classifying one of the samples as high purity quartz and the others as low purity quartz. These veins define tension gashes which usually occur in an echelon arrangement covering a large surface area, suggesting that more of such veins probably exist in the Supe area. Consequently, the quality and potential quantity of HPQ veins in this area suggest a high potential for HPQ exploration in the region.展开更多
Quartzites are widespread within Earth's lithosphere, but their highly pure varieties occur quite infrequently. With the development of alternative energy sources, including solar, and with increasing demand for h...Quartzites are widespread within Earth's lithosphere, but their highly pure varieties occur quite infrequently. With the development of alternative energy sources, including solar, and with increasing demand for high-purity quartz for optics, interest has risen in highpurity silicon-bearing materials. The quartzites discovered in the southeast part of the Eastern Sayan Mountains are particularly attractive for exploration in terms of their raw material quality and feasibility to be enriched. For this reason, their genesis also merits study. Available geochemical data show that chemogenic(d^(18)O>29.2%)siliceous-carbonate sediments of the Irkut Formation are fairly pure(impurity elements <800 ppm), and that half the impurities are easily removed carbonate components of the rock. Bedded quartzites remote from the intrusive granitoids and near-contact quartzites were recognized based on geochemical and petrographic data. Influenced by the Sumsunur granitoids, the near-contact quartzites originally contained >0.9% impurities, but later, under the action of sliding slabs of ophiolite dynamothermal treatment reduced impurities to < 100 ppm, resulting in ‘‘superquartzites' '(highly pure quartzites). The presence of only minor structural impurities is due to the enrichment capacity of superquartzites to 10.1 ppm(7.2 ppm under special conditions) of 10 elements: Fe, Al, Ti, Ca, Mg, Cu,Mn, Na, K, and Li.展开更多
基金support of Shanxi Province Major Science and Technology Projects,China (No.20191101002).
文摘The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.
基金This study is financially supported by the National Science Fund for Distinguished Young Scholars(No.42025301)Guizhou Provincial 2020 Science and Technology Subsidies(No.GZ2020SIG).
文摘The Xingluokeng deposit is the largest gran-ite-related tungsten deposit within the Wuyi metallogenic belt in South China.The Xingluokeng intrusion primarily consists of porphyritic biotite granite,biotite granite,andfine-grained granite.The deposit is represented by veinlet-disseminated mineralization with K-feldspathization and biotitization,alongside quartz-vein mineralization with gre-isenization and sericitization.This study investigates in-situ analyses of quartz compositions from both the intrusion and hydrothermal veinlets and veins.Trace element correlations indicate that trivalent Al^(3+)and Fe^(3+)replace Si^(4+)within the quartz lattice,with monovalent cations(such as Li^(+),Na^(+),and K^(+))primarily serving as charge compensators.Low Ge/Al ratios(<0.013)of quartz from granites suggest a mag-matic origin.The low Al/Ti and Ge/Ti ratios,accompanied by high Ti contents in quartz,suggest that the porphyritic biotite granite and biotite granite are characterized by rela-tively low levels of differentiation and high crystallization temperatures.In contrast,thefine-grained granite exhibits a higher degree of fractionation,lower crystallization tem-peratures,and a closer association with tungsten miner-alization.Ti contents in quartz from quartz veins indicate Qz-Ⅰformed at temperatures above 400°C,while Qz-Ⅱto Qz-Ⅴformed at temperatures below 350°C.Variations in different generations of quartz,as indicated by Al content and(Al+Fe)/(Li+Na+K)ratio,suggest that Qz-Ⅰprecipi-tated from a less acidicfluid with a stable pH,whereas Qz-Ⅱto Qz-Ⅴoriginated from a more acidicfluid with notable pH variations.Consequently,alkaline alteration and acidic alteration supplied the essential Ca and Fe for the precipita-tion of scheelite and wolframite,respectively,highlighting a critical mechanism in tungsten mineralization at the Xin-gluokeng deposit.
基金National Natural Science Foundation of China(Grant Nos.62335006,62022032,62275065,and 61875047)Key Laboratory of Opto-Electronic Information Acquisition and Manipulation(Anhui University),Ministry of Education(Grant No.OEIAM202202)Fundamental Research Funds for the Central Universities(Grant No.HIT.OCEF.2023011).
文摘A highly sensitive light-induced thermoelectric spectroscopy(LITES)sensor based on a multi-pass cell(MPC)with dense spot pattern and a novel quartz tuning fork(QTF)with low resonance frequency is reported in this manuscript.An erbi-um-doped fiber amplifier(EDFA)was employed to amplify the output optical power so that the signal level was further enhanced.The optical path length(OPL)and the ratio of optical path length to volume(RLV)of the MPC is 37.7 m and 13.8 cm^(-2),respectively.A commercial QTF and a self-designed trapezoidal-tip QTF with low frequency of 9461.83 Hz were used as the detectors of the sensor,respectively.The target gas selected to test the performance of the system was acetylene(C2H2).When the optical power was constant at 1000 mW,the minimum detection limit(MDL)of the C2H2-LITES sensor can be achieved 48.3 ppb when using the commercial QTF and 24.6 ppb when using the trapezoid-al-tip QTF.An improvement of the detection performance by a factor of 1.96 was achieved after replacing the commer-cial QTF with the trapezoidal-tip QTF.
基金supported by the National Natural Science Foun-dation of China(Nos.52104250,51874074,and 51874073)the Liaoning Revitalization Talents Program(No.XLYC1807089)the Fundamental Research Funds for the Central Universities(Nos.N2101029 and N2101047).
文摘To enhance the performance of traditional cationic collector,a novel polyhydroxy amine collector N-(2,3-Propanediol)-N-dodecylamine(PDDA)was designed by introducing one propylene glycol group into dodecylamine(DDA).It was prepared by a nucleophilic substitution reaction,which showed better solubility and hydrophobicity than DDA and was firstly employed as the collector for the separation of hematite and quartz.Flotation tests showed that PDDA had an excellent flotation performance and significantly better selectivity than DDA.In addition,the flotation performance and adsorption mechanism of PDDA on hematite and quartz surfaces were studied using Fourier transform infrared spectroscopy(FTIR),zeta potential and X-ray photoelectron spectroscopy(XPS)tests.These results demonstrated that the interaction between PDDA and the minerals’surfaces was mainly electrostatic adsorption and hydrogen bond,while PDDA tended to adsorb on the surfaces of quartz more than that of hematite.Performance optimization of amine collectors by introducing hydroxyl was also verified,which was of great meaning to the design,development,and application of the polyhydroxy cationic collector.In conclusion,PDDA could be used as a potential collector in the flotation separation of quartz and hematite.
基金jointly supported by National Key Research and Development Program of China(Grant No.2022YFC2905002)Special Scientific Research Fund of Tibet Bureau of Geology and Mineral Exploration and Development(Grant No.202119)+2 种基金National Natural Science Foundation of China(Grant No.41902101)Research Start-up Fund of Chengdu University of Technology(Grant No.10912-KYQD2020-08395)the Opening Foundation of MNR Key Laboratory of Metallogeny and Mineral Assessment(Grant No.ZS2101)。
文摘The Bangbule skarn lead-zinc(Pb-Zn)deposit(>1 Mt Zn+Pb)is located in the western Nyainqentanglha polymetallic metallogenetic belt,central Tibet.Lenticular orebodies are all hosted in skarn and developed in the contact zone between the quartz porphyry and carbonate strata of the mid Paleozoic Middle to Upper Chaguoluoma Formation as well as in carbonate and sandstone beds of the Upper Paleozoic Laga Formation.As a newly discovered skarn deposit,the geological background and metallogenesis of this deposit remain poorly understood.Detailed petrological,geochemical and geochronological data of the ore-related quartz porphyry,helps constrain the mineralization age and contributes to discussion on the ore genesis of the Bangbule deposit.Both endoskarn and exoskarn are identified in the Bangbule deposit.From quartz porphyry to carbonate formation,the exoskarn is zoned from proximal garnet skarn to distal pyroxene skarn.Zircon U-Pb dating results show that the quartz porphyry formed at 73.9±0.8 Ma.Geochemical analysis results show that the quartz porphyry has high contents of SiO_(2)(71.40–74.94 wt%)and K_(2)O+Na_(2)O(3.76–8.46 wt%)with A/CNK values of 0.69 to 1.06.Besides,the quartz porphyry is enriched in large ion lithophile elements(LILEs)and light rare earth elements(LREEs)and have lowεNd(t)(from-8.25 to-8.19)and high initial(^(87)Sr/^(86)Sr)i values(0.713611–0.714478).Major,trace elements and whole-rock F concentration analysis results from the endoskarn samples show higher TFe_(2)O_(3),MgO,CaO,Pb+Zn,W,Sn,Mo and F etc.,and lower alkalis(K_(2)O,Na_(2)O,Sr and Ba)than those of fresh quartz porphyry,indicating that the early ore-forming fluids were an Ca-Fe-F-enriched fluid.Massive ore in the proximal skarn might be related to the high F content in the magma,which lowered the solidus temperature of the quartz porphyry magma and caused a lower temperature of the ore-forming fluids,as well as facilitating the precipitation of sphalerite and galena.Based on the geochemical characteristics presented in this study,we propose that the ore-related quartz porphyry was formed by partial melting of crust materials with some juvenile crustal component input.The partial melting of the middle-upper crust after the initial enrichment of lead and zinc elements are important for the formation of Pb-Zn deposits.The case study of the Bangbule deposit has proven that there is still a crust-derived magmatic source region in the western segment of the central Lhasa terrane.Therefore,there is still great potential for Pb-Zn mineralization and Pb-Zn exploration.
基金supported by National Natural Science Foundation of China(Nos.52202460,52177128)National Key R&D Program of China(Nos.2020YFC2201100,2021YFC2202804)+2 种基金China Postdoctoral Science Foundation(Nos.2021M690392,2021TQ0036)Science Foundation for Youth Scholars of the Beijing Institute of TechnologyAdvanced Space Propulsion Laboratory of BICE and the Beijing Engineering Research Centre of Efficient and Green Aerospace Propulsion Technology(No.LabASP-2021-04)。
文摘In the present work,the turbulent mixing process of a polydisperse quartz particle flow with a plasma stream generated by a radio-frequency(RF)inductively coupled plasma torch was numerically studied.The thermobaric stress in the quartz particles under dynamic heating in a heterogeneous plasma flow was determined by a two-stage approximation approach.The effect of the presence of vacuoles in natural quartz on the particle thermobaric destruction conditions was studied.It was found that the equivalent thermal and baric stresses in quartz particles may significantly increase in the presence of vacuoles within a small gas volume fraction.The influence of the regime and energetic working conditions of an RF inductively coupled plasma torch system on the particle thermobaric destruction conditions was examined,and a recommendation was given to promote the degree of thermobaric destruction of quartz particles,which is of substantial importance for improving the overall enrichment efficiency of quartz concentrates.
文摘Interest in the Côte d’Ivoire sedimentary basin has led to numerous investigations. All these investigations are aimed at understanding the functioning of the basin and a paleogeographic approach including sediment transport dynamics. However, the use of exoscopy and semi-quantitative mineralogy has been little developed. This study was carried out to compensate for this lack of interest in these methods. Its aim is to understand the transformation of quartz into hematite using exoscopy and semi-quantitative mineralogy in the Adiaké locality, in the eastern onshore basin of Côte d’Ivoire. Two methods were applied to 250 μm-diameter quartz grains from the 40 m coasts. Exoscopy provides information on microscopic texture, surface and corrosion, as well as determining the transport mechanism and deposition phases of quartz grains. Semi-quantitative mineralogy provides an estimate of the weight percentages of major element oxides and the ultrastructure of quartz grains. Exoscopy showed that these grains had been subjected to torrential fluvial transport. They were marked by mechanical and chemical traces during this transport and evolved in different environments. Semi-quantitative mineralogy shows the existence of negative and positive correlations between oxides. Negative correlations indicate a substitution, in order of importance, of silicon by iron, phosphorus and aluminum in these quartz. Positive correlations show that there is no substitution between the oxides concerned in these quartz grains. Divo’s quartz grains have recorded several mechanical and chemical microstructures of their sedimentary episodes, with the appearance of iron nodules in the ports left by silica.
文摘We have built an atomic force microscope using a quartz tuning fork as sensor. The excitation method we adopted, the electrical excitation, introduces stray capacitance into the signal-processing circuit. In this report, we demonstrated a simple but effective method to compensate for this parasitic capacitance by adding a compensator circuit consisting of an inverting amplifier and a capacitor. The capacitor is connected in series with the inverting amplifier and the compensator is connected in parallel with the quartz tuning fork. The resonance curve of the system measured after adding the homemade compensator resembles that of a pure RLC circuit, meaning that the stray capacitance is successfully eliminated. Furthermore, we tried to use our equipment to measure PDMS sample and got clean data. This system can be further combined with confocal microscope and diamond with NV defect to build scanning NV magnetometry.
文摘<正>According to the piezoelectric equation and the vibration theory of the quartz crystal,the relations between the vibrating frequency and structural parameters under the thickness-shear-vibration of AT-cut quartz crystal have been studied. The frequency conditions under which quartz crystal resonator formed stationary wave inside the electrode district and the transmission characteristics of wave outside the electrode district have also been discussed.A quartz crystal resonator was developed based on this analysis.The experiment showed that the force-sensing characteristics were independent of the fixation of the crystal edge.The detecting distinguish ability was up to 0.001°,and the short-term frequency stability was up to 1.38×10~ (-10)/min.
基金the financial support from the National Natural Science Foundation of China grants(Nos.40272083 , 40172019) the Hubei Province Natural Science Foundation ofChina grant(No.2002ABO20).
文摘Fluid inclusions at a nano to sub-micron scale in quartz from jadeite quartzite at Shuanghe, Dabie Mountains, have been investigated by using the transmission electron microscopy (TEM). Most fluid inclusions are spherical or negative crystal shaped, forming wide swarm-like trails. The TEM reveals that the relationship between coesite and the host quartz is syntaxic and provides strong evidence of the occurrence of high-salty fluids at peak metamorphic conditions. The fluid inclusions are often connected to dislocations, which are undetected at the scale of optical microscopy. Non-decrepitation leakage of fluid inclusions may occur by pipe diffusion of molecule H2O or CO2 along dislocations from the inclusions into the host quartz, thus leading to original inclusion density and composition changes. It should be taken into full account for the correct petrological interpretation of micro-thermometric results.
基金Project supported by the National High Technology Research and Developmem Program of China ~Grant No. 2013AA030901).
文摘We present a new polymer quartz piezoelectric crystal sensor that takes a quartz piezoelectric crystal as the basal material and a nanometer nonmetallic polymer thin film as the surface coating based on the principle of quartz crystal microbalance (QCM). The new sensor can be used to detect the characteristic materials of a volatile liquid. A mechanical model of the new sensor was built, whose structure was a thin circle plate composing of polytef/quartz piezoelectric/polytef. The mechanical model had a diameter of 8 mm and a thickness of 170 ~tm. The vibration state of the model was simulated by software ANSYS after the physical parameters and the boundary condition of the new sensor were set. According to the results of experiments, we set up a frequency range from 9.995850 MHz to 9.997225 MHz, 17 kinds of frequencies and modes of vibration were obtained within this range. We found a special frequency fsp of 9.996358 MHz. When the resonant frequency of the new sensor's mechanical model reached the special frequency, a special phenomenon occurred. In this case, the amplitude of the center point O on the mechanical model reached the maximum value. At the same time, the minimum absolute difference between the simulated frequency based on the ANSYS software and the experimental measured stable frequency was reached. The research showed that the design of the new polymer quartz piezoelectric crystal sensor perfectly conforms to the principle of QCM. A special frequency value fsp was found and subsequently became one of the most important parameters in the new sensor design.
文摘High-purity quartz (HPQ), the prime source of silica, is increasingly considered a strategic mineral in the world market because it is the raw material for special applications in high-tech industries owing to its unique physical and chemical properties. The expected growth in demand for HPQ implies that more sources have to be found. This is the primary motivation for this study which targets the Supe area, SW Region of Cameroon. The structural occurrences of quartz veins were mapped and samples collected. The chemical nature and textural features of these samples were subsequently analyzed by X-ray tomography, scanning electron microscopy (SEM), and electron microprobe analysis (EMPA). Three deformation events, D<sub>1</sub> - D<sub>3</sub> are recorded. D<sub>1</sub> is marked by the development of the strong S<sub>1</sub> foliation defined by the gneissic layering and schistosity. D<sub>2</sub> is a NE-SW ductile to brittle sinistral shear that controlled the formation of tension gashes that served as subsequent pathways for quartz-rich hydrothermal fluids to circulate and eventually precipitate quartz. The presence of rutile, tourmaline, and mica inclusions in the Supe veins affects the purity of the quartz. However, quartz can be treated to improve its quality. Taking into consideration the nine determinant trace elements used to classify HPQ, three (Li, P, and B) are below detection limits, Al concentrations are within the HPQ, quartz market standard, and average natural abundance;Ti values are high above all three standards in all except one sample, while Na, Ca, K, and Fe values fluctuate, thus classifying one of the samples as high purity quartz and the others as low purity quartz. These veins define tension gashes which usually occur in an echelon arrangement covering a large surface area, suggesting that more of such veins probably exist in the Supe area. Consequently, the quality and potential quantity of HPQ veins in this area suggest a high potential for HPQ exploration in the region.
基金performed under financial support of Integration Program No. 0341-2016-001Russian Foundation for Basic Research Projects 15-05-02772a and 18-05-00439a with research equipment isotope-geochemical studies at IGC SB RAS
文摘Quartzites are widespread within Earth's lithosphere, but their highly pure varieties occur quite infrequently. With the development of alternative energy sources, including solar, and with increasing demand for high-purity quartz for optics, interest has risen in highpurity silicon-bearing materials. The quartzites discovered in the southeast part of the Eastern Sayan Mountains are particularly attractive for exploration in terms of their raw material quality and feasibility to be enriched. For this reason, their genesis also merits study. Available geochemical data show that chemogenic(d^(18)O>29.2%)siliceous-carbonate sediments of the Irkut Formation are fairly pure(impurity elements <800 ppm), and that half the impurities are easily removed carbonate components of the rock. Bedded quartzites remote from the intrusive granitoids and near-contact quartzites were recognized based on geochemical and petrographic data. Influenced by the Sumsunur granitoids, the near-contact quartzites originally contained >0.9% impurities, but later, under the action of sliding slabs of ophiolite dynamothermal treatment reduced impurities to < 100 ppm, resulting in ‘‘superquartzites' '(highly pure quartzites). The presence of only minor structural impurities is due to the enrichment capacity of superquartzites to 10.1 ppm(7.2 ppm under special conditions) of 10 elements: Fe, Al, Ti, Ca, Mg, Cu,Mn, Na, K, and Li.