The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NF...The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NFC)were extracted from four biomass resources.The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions.The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli.As the concentration increased,the storage and loss modulus of NFC dispersion increased.When the shear rate increased to a certain value,there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived from different biomass resources and the suspensions with different solid concentrations.NFC dispersion’s storage and loss modulus increased when the temperature rose to nearly 80℃.We hope this study can deepen the understanding of the rheological properties of NFC colloids derived from different biomass resources.展开更多
This paper presents a mathematical model consisting of conservation and balance laws (CBL) of classical continuum mechanics (CCM) and ordered rate constitutive theories in Lagrangian description derived using entropy ...This paper presents a mathematical model consisting of conservation and balance laws (CBL) of classical continuum mechanics (CCM) and ordered rate constitutive theories in Lagrangian description derived using entropy inequality and the representation theorem for thermoviscoelastic solids (TVES) with rheology. The CBL and the constitutive theories take into account finite deformation and finite strain deformation physics and are based on contravariant deviatoric second Piola-Kirchhoff stress tensor and its work conjugate covariant Green’s strain tensor and their material derivatives of up to order m and n respectively. All published works on nonlinear dynamics of TVES with rheology are mostly based on phenomenological mathematical models. In rare instances, some aspects of CBL are used but are incorrectly altered to obtain mass, stiffness and damping matrices using space-time decoupled approaches. In the work presented in this paper, we show that this is not possible using CBL of CCM for TVES with rheology. Thus, the mathematical models used currently in the published works are not the correct description of the physics of nonlinear dynamics of TVES with rheology. The mathematical model used in the present work is strictly based on the CBL of CCM and is thermodynamically and mathematically consistent and the space-time coupled finite element methodology used in this work is unconditionally stable and provides solutions with desired accuracy and is ideally suited for nonlinear dynamics of TVES with memory. The work in this paper is the first presentation of a mathematical model strictly based on CBL of CCM and the solution of the mathematical model is obtained using unconditionally stable space-time coupled computational methodology that provides control over the errors in the evolution. Both space-time coupled and space-time decoupled finite element formulations are considered for obtaining solutions of the IVPs described by the mathematical model and are presented in the paper. Factors or the physics influencing dynamic response and dynamic bifurcation for TVES with rheology are identified and are also demonstrated through model problem studies. A simple model problem consisting of a rod (1D) of TVES material with memory fixed at one end and subjected to harmonic excitation at the other end is considered to study nonlinear dynamics of TVES with rheology, frequency response as well as dynamic bifurcation phenomenon.展开更多
The hydrodynamics of the capillary flow of a viscous-plastic liquid in cylindrical rectilinear pores is considered, as a result of which the structural velocity distribution over the pore cross section is obtained. An...The hydrodynamics of the capillary flow of a viscous-plastic liquid in cylindrical rectilinear pores is considered, as a result of which the structural velocity distribution over the pore cross section is obtained. Analytical solutions are proposed for the equations of hydraulic diffusion and nonlinear filtration for a non-Newtonian fluid in a cylindrical porous medium. It is noted that when a non-Newtonian fluid flows in a porous medium, the filtration equations take a nonlinear form due to the effective viscosity, shear, and yield stresses taken into account in its structure. The proposed solutions make it possible to evaluate the state of the porous medium and its main parameters (permeability, hydraulic diffusion, and effective viscosity coefficients). The obtained solutions are compared with existing experimental data for non-Newtonian oils.展开更多
As the base oil of the current flat-rheology synthetic drilling fluid is high in cost and not renewable, the biodiesel-based flat-rheology drilling fluid with low-cost, environmental protection and renewable advantage...As the base oil of the current flat-rheology synthetic drilling fluid is high in cost and not renewable, the biodiesel-based flat-rheology drilling fluid with low-cost, environmental protection and renewable advantage was studied. Based on the optimization of raw materials, a cheap, environment-friendly biodiesel of soybean oil ethyl ester with good fluidity at low temperature was selected as the base oil. By selecting high oil-water ratio and introducing cationic surfactant into the auxiliary emulsifier, the thickening of biodiesel-based emulsion caused by hydrolysis and saponification after high-temperature aging was effectively eliminated. The organoclay prepared with cationic modifier of hexadecyl trimethyl ammonium chloride was used to improve the rheologic properties, stability and fluid loss of the drilling fluid while preventing low-temperature thickening. A flat-rheology modifier was synthesized with dimer fatty acid and cocoanut fatty acid diethanolamide, which could form strong network structure in the biodiesel-based drilling fluid to adjust effectively rheological properties of the drilling fluid. A biodiesel-based flat-rheology drilling fluid system with the density of 1.2 g/cm^(3) has been formulated which has constant rheology in the temperature range of 2-90 ℃, temperature tolerance of 160 ℃, seawater salinity tolerance of 5%, shale cuttings tolerance of 10%, and is environmentally friendly.展开更多
Flow assurance is one of the core issues in safe and economical operation of waxy crude pipelines.Its essence lies in flow and heat transfer of the crude.In the past 10 years,the authors' team has achieved a lot of i...Flow assurance is one of the core issues in safe and economical operation of waxy crude pipelines.Its essence lies in flow and heat transfer of the crude.In the past 10 years,the authors' team has achieved a lot of innovative results in aspects of waxy crude rheology,flow assurance assessment,and pipelining technologies on the basis of decades of studies.The rheological characteristics of waxy crude are much better understood,and a method for quantitatively simulating the effect of flow shear was developed based on some theoretical breakthroughs.Studies of the mechanism of waxy crude rheology have been deepened to the quantitative level.After successful development of efficient numericalalgorithms,accurate simulations have been achieved for various complex flow and heat transfer situations in waxy crude pipelining,and a reliability-based approach to flow assurance assessment has been set up.New pipelining technologies have been developed such as batching pour-point depressant-(PPD-) treated multiple-waxy-crudes,intermittent transport of waxy crudes through long-distance pipelines,and batching hot and cold crudes.By their application,a series of problems hindering safe,efficient and flexible operation of waxy crude pipelines were tackled,demonstrating that transportation technologies for waxy crude have advanced to a new and high level.展开更多
In order to study the rheological properties of red stone granular soil,a series of rheological experiments were executed on large tri-axial rheological apparatus.Under 100,200 and 300 kPa confining stress conditions,...In order to study the rheological properties of red stone granular soil,a series of rheological experiments were executed on large tri-axial rheological apparatus.Under 100,200 and 300 kPa confining stress conditions,the rheological tests were carried out.These experiment results showed that the stress conditions,especially the stress level were the critical influencing factors of the rheological deformation properties.Under the low stress level(S=0.1),the granular soil showed the elastic properties,and there was no obvious rheological deformation.Under the middle stress level(0.2<S≤0.6),creep curves showed the linear viscoelastic rheological properties.However,under the high stress level(S>0.8) creep curves showed the non-linear viscous plastic rheological properties.Especially,under the stress level of S=1.0,the accelerated rheological phase of creep curves occurred at early time with a trend of failure.The stress level had obvious effects on the final rheological deformation of the soil sample,and the final rheological deformation increments nonlinearly increased with stress level.The final rheological deformation increment and step was little under low stress level,while it became large under high stress level,which showed the nonlinearly rheological properties of the granular soil.The confining pressure also had direct effects on final rheological deformation,and the final rheological deformation linearly increased with confining pressure increments.展开更多
Soft and medium-hard rocks are subjected to high rheology under high stress,and they are prone to a relatively large-degree of deformation when perturbed by external impacting loads.The phenomenon where rock deformati...Soft and medium-hard rocks are subjected to high rheology under high stress,and they are prone to a relatively large-degree of deformation when perturbed by external impacting loads.The phenomenon where rock deformation is developed due to external impacting perturbation in the rheological state is defined as the rock rheological perturbation effect.This work presents a new experimental system for investigating the rock rheological perturbation effect with experiments on medium-hard red sandstone.Results from our analysis show that red sandstone changes under two mechanical mechanisms:deformation-hardening effects at low stress states,and damage-fracture effects at high stress states when impacted by certain external impacting loads.Red sandstone tested in our experiments has a strain threshold of about 90% of the ultimate strain under the perturbation effect;the red sandstone is sensitive to a perturbed load when its actual strain exceeds the threshold.The perturbed deformation process of the rock can be divided into three phases:decline,approximately constant speed and acceleration.The rock will be rapidly destroyed when the perturbed deformation accumulates to a certain degree.The perturbation effect of rock deformation under uniaxial compression is more obvious than that under axial compression.Based on our experiment,a constitutive relation of the rock rheological perturbation effect is developed.展开更多
Waxy crude oil exhibits complex shear-and-thermal-history-dependent non-Newtonian behaviors.In the past 10 years,driven by the petroleum industry,crude oil rheology has been an active field.Studies on crude oil rheolo...Waxy crude oil exhibits complex shear-and-thermal-history-dependent non-Newtonian behaviors.In the past 10 years,driven by the petroleum industry,crude oil rheology has been an active field.Studies on crude oil rheology have been passing a way from simply relying on rheological measurements,through quantitative experimental simulation of shear and thermal history effects in pipelining,to recent development of correlation between flow properties and shear and thermal history.Currently,the study is toward quantitative inquiry of relations between the rheological behaviors and micro-structures of wax crystals as well as oil compositions.Advances achieved by the author' team are summarized,including simulation of the thermal and shear history effects,correlations and computation of flow properties,fractal characterization of morphology and structure of wax crystals,relations of rheological behaviors to fractal dimension and oil compositions,and the most successful example of the application of rheology in crude oil pipelining.Future studies are prospected.展开更多
Rheological properties of low-concentration Konjac gum and impacts of concentration,shearing rate,pH value and stirring time on its viscosity were studied.The results show that the viscosity of low-concentration Konja...Rheological properties of low-concentration Konjac gum and impacts of concentration,shearing rate,pH value and stirring time on its viscosity were studied.The results show that the viscosity of low-concentration Konjac gum increases with the increase of its concentration.The solution presents pseudo-plasticity fluid,which shows the characters of shear thinning as follows:first,its viscosity decreases gradually as the temperature increases,and then increases with the increase of temperature.The viscosity decreases sharply at both acid and alkaline conditions,indicating that it is influenced apparently by pH value.And the viscosity of low-concentration Konjac gum is also impacted by the stirring time.展开更多
Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relation...Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn' t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn' t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate (SMO) functionality.展开更多
Numerical modeling of salt tectonics is a rapidly evolving field; however, the constitutive equations to model long-term rock salt rheology in nature still remain controversial. Firstly, we built a database about the ...Numerical modeling of salt tectonics is a rapidly evolving field; however, the constitutive equations to model long-term rock salt rheology in nature still remain controversial. Firstly, we built a database about the strain rate versus the differential stress through collecting the data from salt creep experiments at a range of temperatures(20–200 ℃) in laboratories. The aim is to collect data about salt deformation in nature, and the flow properties can be extracted from the data in laboratory experiments.Moreover, as an important preparation for salt tectonics modeling, a numerical model based on creep experiments of rock salt was developed in order to verify the specific model using the Abaqus package. Finally, under the condition of low differential stresses, the deformation mechanism would be extrapolated and discussed according to microstructure research. Since the studies of salt deformation in nature are the reliable extrapolation of laboratory data, we simplified the rock salt rheology to dislocation creep corresponding to power law creep(n = 5) with the appropriate material parameters in the salt tectonic modeling.展开更多
The rapeseed oil extracted from the mature seeds was purified by refining processing,and the rheological characteristic analysis of the viscosity and dynamic shear rate at gradient temperatures was made.The result sho...The rapeseed oil extracted from the mature seeds was purified by refining processing,and the rheological characteristic analysis of the viscosity and dynamic shear rate at gradient temperatures was made.The result shows that at 20,40,60 and 80 ℃ respectively,when the shear rate gradually rises,the torque increases accordingly but its viscosity does not vary distinctly.The result suggests that when rapeseed oil is used as the raw of edible oils and industries,the working procedures at high temperature will not influence its rheological characteristic distinctly.展开更多
Petroleum and nature gas not only are important resources,but also are important strategic materials of our country.All methods the enhancing the producing degree of petroleum and natural gas reservoir,increasing sing...Petroleum and nature gas not only are important resources,but also are important strategic materials of our country.All methods the enhancing the producing degree of petroleum and natural gas reservoir,increasing single well production and extending the stimulation period of validity are important stratagem for petroleum and natural gas exploitation.Fracturing and acidizing are the main methods for stimulation as well as one of representative examples of rheology theory application in engineering.Based on analysis of low permeability reservoir characteristics,the fracturing and acidizing stimulation principles and main controlling factors were discussed.And the mechanical characteristics,chemical reaction and rheological behavior in the stimulation process were reviewed.Furthermore research trends afterwards including the material and fluid rheology in oil and natural gas production process,the deep rock fracture initiation and extension rheology,and the fracturing and acidizing application rheology were also proposed in this paper.展开更多
It is known that there exist obivious differences between the two most commonly used definitions of fractional derivatives-Riemann-Liouville (R-L) definition and Caputo definition. The multiple definitions of fracti...It is known that there exist obivious differences between the two most commonly used definitions of fractional derivatives-Riemann-Liouville (R-L) definition and Caputo definition. The multiple definitions of fractional derivatives in fractional calculus have hindered the application of fractional calculus in rheology. In this paper, we clarify that the R-L definition and Caputo definition are both rheologically imperfect with the help of mechanical analogues of the fractional element model (Scott-Blair model). We also clarify that to make them perfect rheologically, the lower terminals of both definitions should be put to ∞. We further prove that the R-L definition with lower terminal a →∞ and the Caputo definition with lower terminal a →∞ are equivalent in the differentiation of functions that are smooth enough and functions that have finite number of singular points. Thus we can define the fractional derivatives in rheology as the R-L derivatives with lower terminal a →∞ (or, equivalently, the Caputo derivatives with lower terminal a →∞) not only for steady-state processes, but also for transient processes. Based on the above definition, the problems of composition rules of fractional operators and the initial conditions for fractional differential equations are discussed, respectively. As an example we study a fractional oscillator with Scott-Blair model and give an exact solution of this equation under given initial conditions.展开更多
Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oi...Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oil slurries prepared by different kinds of oil varies differently during heating. The viscosity of the coal-oil slurry prepared by the catalytic cracking slurry (FCC) generally decreases during heating. However, the viscosity of the coal-oil slurry prepared by the high-temperature coal tar (CT) will peak at 338 ℃ during heating. The differences in viscosity variations of coal-oil slurries are analyzed. In addition to the temperature, the properties of the solvents and coal are the main influencing factors. Because the used coal contains a large number of polar functional groups, the swelling behavior of the coal in polar solvent (CT) is stronger than that in non-polar solvent (FCC). The swelling effect of the coal can result in the appearance of the viscosity peak. Therefore, before 100 ~C, the solvent molecules entering into the coal pores is the main influencing factor of coal-oil slurries viscosity variations. After 100 ℃, the increasing of particle size of coal particles is the main influencing factor of coal-oil slurries viscosity variations.展开更多
Polymer injectivity is an important factor for evaluating the project economics of chemical flood,which is highly related to the polymer viscosity.Because the flow rate varies rapidly near injectors and significantly ...Polymer injectivity is an important factor for evaluating the project economics of chemical flood,which is highly related to the polymer viscosity.Because the flow rate varies rapidly near injectors and significantly changes the polymer viscosity due to the non-Newtonian rheological behavior,the polymer viscosity near the wellbore is difficult to estimate accurately with the practical gridblock size in reservoir simulation.To reduce the impact of polymer rheology upon chemical EOR simulations,we used an efficient multilevel local grid refinement(LGR)method that provides a higher resolution of the flows in the near-wellbore region.An efficient numerical scheme was proposed to accurately solve the pressure equation and concentration equations on the multilevel grid for both homogeneous and heterogeneous reservoir cases.The block list and connections of the multilevel grid are generated via an efficient and extensible algorithm.Field case simulation results indicate that the proposed LGR is consistent with the analytical injectivity model and achieves the closest results to the full grid refinement,which considerably improves the accuracy of solutions compared with the original grid.In addition,the method was validated by comparing it with the LGR module of CMG_STARS.Besides polymer injectivity calculations,the LGR method is applicable for other problems in need of near-wellbore treatment,such as fractures near wells.展开更多
Methylene bis(thiocyanate)(MBT) is insoluble in water, so suspension concentrate(SC) of MBT is extremely relied on surfactants. In this paper, SC of MBT was prepared with wet-grinding technology, and the effect of sur...Methylene bis(thiocyanate)(MBT) is insoluble in water, so suspension concentrate(SC) of MBT is extremely relied on surfactants. In this paper, SC of MBT was prepared with wet-grinding technology, and the effect of surfactants,such as Morwet D425(D425) and Morwet EFW(EFW)(two kinds of dispersant), on the Zeta potential and rheology behavior of MBT SC were investigated. The results showed that the Zeta potential absolute value of MBT SC increased with the increasing content of D425, and it decreased with the increasing content of EFW at acidic solution(pH = 4.5). In the combination system of D425 and EFW, Zeta potential of MBT SC decreased first and then increased with the increasing content of EFW. The relationship between shear rate(γ) and viscosity(η) was studied according to Herschel–Bulkley model: η = η0+ k/γ, and the relationship between shear rate(γ) and shear force(τ) was investigated according to:τ = τ0+Kγ~n. It was revealed that the mixed fluid belonged to Yield Pseudoplastic Fluid.展开更多
Objectives: To compare the therapeutic effect of scalp electroacupuncture with that of conventional body acupuncture for apoplexy (wind stroke) and to observe the influence of both acupuncture therapies on hemorheolog...Objectives: To compare the therapeutic effect of scalp electroacupuncture with that of conventional body acupuncture for apoplexy (wind stroke) and to observe the influence of both acupuncture therapies on hemorheology of ischemic apoplexy.Methods: 183 patients, whose diseases are attributed to apoplexy according to the diagnostic criteria, are randomly divided into treatment group (93 cases) and control group (90 cases) and treated respectively with scalp electroacupuncture and conventional body acupuncture. 11 items of hemorheology of patients’ blood samples are tested with NXE-1 Viscometer which are taken in the early morning before and after treatment under fasting condition. Results: Both scalp electroacupuncture and conventional body acupuncture exert therapeutic effect for apoplexy, but the effect of scalp electroacupuncture is obviously better than that of conventional acupuncture (P< 0.05 ); both treatment group and control group are statistically significant in reducing plasma viscosity, high shear reduced viscosity, low shear reduced viscosity, erythrocyte sedimentation rate, hematocrit and fibrinogen, (P<0.01 and 0.05); while the treatment group is statistically significant in reducing whole blood viscosity, ratio of whole blood viscosity, erythrocyte index of rigidity and electrophoresis time of erythrocyte (P<0.01~ 0.05), but the control group is not significant statistically in influencing these indexes (P>0.05).展开更多
The present study investigates the effects of incorporating oat bran(OB) into Chinese steamed bread(CSB). Different levels(5%, 10% and 15%) of OB were used to replace wheat flour in the manufacture of CSB. The rheolog...The present study investigates the effects of incorporating oat bran(OB) into Chinese steamed bread(CSB). Different levels(5%, 10% and 15%) of OB were used to replace wheat flour in the manufacture of CSB. The rheological properties of the dough were measured(water absorption(WA), development time, mixing tolerance, extensibility and stickiness). The addition of OB significantly increased WA, development time and stickiness, whereas decreased extensibility of dough. The physical properties of CSB were determined using specific volume, loaf height, moisture, and texture analysis. The nutritional quality of the bread was also analysed using an in vitro digestion method mimicking intestinal digestion. The results illustrated that the incorporation of OB into wheat flour decreases specific volume and softness of CSB. The addition of OB decreased the glycaemic response of steamed bread.This study illustrates the potential addition of OB to improve the nutritional quality of CSB.展开更多
The average stretching direction,local rotation angular,and stretching ratio parameters of molecular trains were used to express the rheology deformation.Based on this micro geometrical deformation,the macro deformati...The average stretching direction,local rotation angular,and stretching ratio parameters of molecular trains were used to express the rheology deformation.Based on this micro geometrical deformation,the macro deformation of medium was expressed.Then,using intrinsic elasticity concept,the stress-strain relation was obtained.In this theoretic formulation,the response functions of extension ratio and rotation angular were used to express the rheology feature of medium.For medium composed by incompressible molecular trains,the local rotation angular divides rheology deformation into three kinds:viscoelastic deformation or elasticity enhancement,viscoplastic deformation or elasticity degenerate and constant elasticity range.These results explain the experimental features of rheology deformation well.展开更多
基金supported in part by the Fundamental Research Funds for the Central Universities(2572019BB03 and 2572021CG01)the Startup Fund and the Catalyst Fund from Rowan University and the Research Grant(PC 20-22)from the New Jersey Health Foundation from USAthe Grant(DMR-2116353)from the National Science Foundation.
文摘The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NFC)were extracted from four biomass resources.The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions.The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli.As the concentration increased,the storage and loss modulus of NFC dispersion increased.When the shear rate increased to a certain value,there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived from different biomass resources and the suspensions with different solid concentrations.NFC dispersion’s storage and loss modulus increased when the temperature rose to nearly 80℃.We hope this study can deepen the understanding of the rheological properties of NFC colloids derived from different biomass resources.
文摘This paper presents a mathematical model consisting of conservation and balance laws (CBL) of classical continuum mechanics (CCM) and ordered rate constitutive theories in Lagrangian description derived using entropy inequality and the representation theorem for thermoviscoelastic solids (TVES) with rheology. The CBL and the constitutive theories take into account finite deformation and finite strain deformation physics and are based on contravariant deviatoric second Piola-Kirchhoff stress tensor and its work conjugate covariant Green’s strain tensor and their material derivatives of up to order m and n respectively. All published works on nonlinear dynamics of TVES with rheology are mostly based on phenomenological mathematical models. In rare instances, some aspects of CBL are used but are incorrectly altered to obtain mass, stiffness and damping matrices using space-time decoupled approaches. In the work presented in this paper, we show that this is not possible using CBL of CCM for TVES with rheology. Thus, the mathematical models used currently in the published works are not the correct description of the physics of nonlinear dynamics of TVES with rheology. The mathematical model used in the present work is strictly based on the CBL of CCM and is thermodynamically and mathematically consistent and the space-time coupled finite element methodology used in this work is unconditionally stable and provides solutions with desired accuracy and is ideally suited for nonlinear dynamics of TVES with memory. The work in this paper is the first presentation of a mathematical model strictly based on CBL of CCM and the solution of the mathematical model is obtained using unconditionally stable space-time coupled computational methodology that provides control over the errors in the evolution. Both space-time coupled and space-time decoupled finite element formulations are considered for obtaining solutions of the IVPs described by the mathematical model and are presented in the paper. Factors or the physics influencing dynamic response and dynamic bifurcation for TVES with rheology are identified and are also demonstrated through model problem studies. A simple model problem consisting of a rod (1D) of TVES material with memory fixed at one end and subjected to harmonic excitation at the other end is considered to study nonlinear dynamics of TVES with rheology, frequency response as well as dynamic bifurcation phenomenon.
文摘The hydrodynamics of the capillary flow of a viscous-plastic liquid in cylindrical rectilinear pores is considered, as a result of which the structural velocity distribution over the pore cross section is obtained. Analytical solutions are proposed for the equations of hydraulic diffusion and nonlinear filtration for a non-Newtonian fluid in a cylindrical porous medium. It is noted that when a non-Newtonian fluid flows in a porous medium, the filtration equations take a nonlinear form due to the effective viscosity, shear, and yield stresses taken into account in its structure. The proposed solutions make it possible to evaluate the state of the porous medium and its main parameters (permeability, hydraulic diffusion, and effective viscosity coefficients). The obtained solutions are compared with existing experimental data for non-Newtonian oils.
基金Supported by the NSFC Innovative Research Group(51821092)NSFC Foundation(52004297)+1 种基金China Postdoctoral Science Foundation(BX20200384)China University of Petroleum(Beijing)Foundation(2462020XKBH00)。
文摘As the base oil of the current flat-rheology synthetic drilling fluid is high in cost and not renewable, the biodiesel-based flat-rheology drilling fluid with low-cost, environmental protection and renewable advantage was studied. Based on the optimization of raw materials, a cheap, environment-friendly biodiesel of soybean oil ethyl ester with good fluidity at low temperature was selected as the base oil. By selecting high oil-water ratio and introducing cationic surfactant into the auxiliary emulsifier, the thickening of biodiesel-based emulsion caused by hydrolysis and saponification after high-temperature aging was effectively eliminated. The organoclay prepared with cationic modifier of hexadecyl trimethyl ammonium chloride was used to improve the rheologic properties, stability and fluid loss of the drilling fluid while preventing low-temperature thickening. A flat-rheology modifier was synthesized with dimer fatty acid and cocoanut fatty acid diethanolamide, which could form strong network structure in the biodiesel-based drilling fluid to adjust effectively rheological properties of the drilling fluid. A biodiesel-based flat-rheology drilling fluid system with the density of 1.2 g/cm^(3) has been formulated which has constant rheology in the temperature range of 2-90 ℃, temperature tolerance of 160 ℃, seawater salinity tolerance of 5%, shale cuttings tolerance of 10%, and is environmentally friendly.
基金the strong and long-term support from the National Natural Science Foundation of China (Grant Nos. 51134006, 50944030)the Ministry of Education (Grant No. 104118)+2 种基金Beijing Municipal Education Commission (Grant No. YB20081141401)companies such as China National Petroleum Corporation (CNPC)China Petrochemical Corporation (SINOPEC)
文摘Flow assurance is one of the core issues in safe and economical operation of waxy crude pipelines.Its essence lies in flow and heat transfer of the crude.In the past 10 years,the authors' team has achieved a lot of innovative results in aspects of waxy crude rheology,flow assurance assessment,and pipelining technologies on the basis of decades of studies.The rheological characteristics of waxy crude are much better understood,and a method for quantitatively simulating the effect of flow shear was developed based on some theoretical breakthroughs.Studies of the mechanism of waxy crude rheology have been deepened to the quantitative level.After successful development of efficient numericalalgorithms,accurate simulations have been achieved for various complex flow and heat transfer situations in waxy crude pipelining,and a reliability-based approach to flow assurance assessment has been set up.New pipelining technologies have been developed such as batching pour-point depressant-(PPD-) treated multiple-waxy-crudes,intermittent transport of waxy crudes through long-distance pipelines,and batching hot and cold crudes.By their application,a series of problems hindering safe,efficient and flexible operation of waxy crude pipelines were tackled,demonstrating that transportation technologies for waxy crude have advanced to a new and high level.
基金Project(200413) supported by Communication Science and Technology Fund of Hunan Province,China
文摘In order to study the rheological properties of red stone granular soil,a series of rheological experiments were executed on large tri-axial rheological apparatus.Under 100,200 and 300 kPa confining stress conditions,the rheological tests were carried out.These experiment results showed that the stress conditions,especially the stress level were the critical influencing factors of the rheological deformation properties.Under the low stress level(S=0.1),the granular soil showed the elastic properties,and there was no obvious rheological deformation.Under the middle stress level(0.2<S≤0.6),creep curves showed the linear viscoelastic rheological properties.However,under the high stress level(S>0.8) creep curves showed the non-linear viscous plastic rheological properties.Especially,under the stress level of S=1.0,the accelerated rheological phase of creep curves occurred at early time with a trend of failure.The stress level had obvious effects on the final rheological deformation of the soil sample,and the final rheological deformation increments nonlinearly increased with stress level.The final rheological deformation increment and step was little under low stress level,while it became large under high stress level,which showed the nonlinearly rheological properties of the granular soil.The confining pressure also had direct effects on final rheological deformation,and the final rheological deformation linearly increased with confining pressure increments.
基金Projects(51474218,51304127,50474029)supported by the National Natural Science Foundation of ChinaProject(2016M590646)supported by China Postdoctoral Science FoundationProject(2016121)supported by Qingdao Postdoctoral Applied Research Foundation,China
文摘Soft and medium-hard rocks are subjected to high rheology under high stress,and they are prone to a relatively large-degree of deformation when perturbed by external impacting loads.The phenomenon where rock deformation is developed due to external impacting perturbation in the rheological state is defined as the rock rheological perturbation effect.This work presents a new experimental system for investigating the rock rheological perturbation effect with experiments on medium-hard red sandstone.Results from our analysis show that red sandstone changes under two mechanical mechanisms:deformation-hardening effects at low stress states,and damage-fracture effects at high stress states when impacted by certain external impacting loads.Red sandstone tested in our experiments has a strain threshold of about 90% of the ultimate strain under the perturbation effect;the red sandstone is sensitive to a perturbed load when its actual strain exceeds the threshold.The perturbed deformation process of the rock can be divided into three phases:decline,approximately constant speed and acceleration.The rock will be rapidly destroyed when the perturbed deformation accumulates to a certain degree.The perturbation effect of rock deformation under uniaxial compression is more obvious than that under axial compression.Based on our experiment,a constitutive relation of the rock rheological perturbation effect is developed.
文摘Waxy crude oil exhibits complex shear-and-thermal-history-dependent non-Newtonian behaviors.In the past 10 years,driven by the petroleum industry,crude oil rheology has been an active field.Studies on crude oil rheology have been passing a way from simply relying on rheological measurements,through quantitative experimental simulation of shear and thermal history effects in pipelining,to recent development of correlation between flow properties and shear and thermal history.Currently,the study is toward quantitative inquiry of relations between the rheological behaviors and micro-structures of wax crystals as well as oil compositions.Advances achieved by the author' team are summarized,including simulation of the thermal and shear history effects,correlations and computation of flow properties,fractal characterization of morphology and structure of wax crystals,relations of rheological behaviors to fractal dimension and oil compositions,and the most successful example of the application of rheology in crude oil pipelining.Future studies are prospected.
基金Project(08RM05) supported by Institute of Rheological Mechanics and Material Engineering of Central South University of Forestry Technology
文摘Rheological properties of low-concentration Konjac gum and impacts of concentration,shearing rate,pH value and stirring time on its viscosity were studied.The results show that the viscosity of low-concentration Konjac gum increases with the increase of its concentration.The solution presents pseudo-plasticity fluid,which shows the characters of shear thinning as follows:first,its viscosity decreases gradually as the temperature increases,and then increases with the increase of temperature.The viscosity decreases sharply at both acid and alkaline conditions,indicating that it is influenced apparently by pH value.And the viscosity of low-concentration Konjac gum is also impacted by the stirring time.
基金Supported by Independent Research Projects of State Key Laboratory of Explosion Science and Technology(ZDKT08-05)
文摘Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn' t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn' t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate (SMO) functionality.
基金RWTH Aachen UniversityChina University of Petroleum for the support of the work+1 种基金funded by the startup project of China University of Petroleum, Beijing (No.2462014YJRC041)supported by Science Foundation of China University of Petroleum, Beijing (No. C201601)
文摘Numerical modeling of salt tectonics is a rapidly evolving field; however, the constitutive equations to model long-term rock salt rheology in nature still remain controversial. Firstly, we built a database about the strain rate versus the differential stress through collecting the data from salt creep experiments at a range of temperatures(20–200 ℃) in laboratories. The aim is to collect data about salt deformation in nature, and the flow properties can be extracted from the data in laboratory experiments.Moreover, as an important preparation for salt tectonics modeling, a numerical model based on creep experiments of rock salt was developed in order to verify the specific model using the Abaqus package. Finally, under the condition of low differential stresses, the deformation mechanism would be extrapolated and discussed according to microstructure research. Since the studies of salt deformation in nature are the reliable extrapolation of laboratory data, we simplified the rock salt rheology to dislocation creep corresponding to power law creep(n = 5) with the appropriate material parameters in the salt tectonic modeling.
基金Project(2007CB210201) supported by Major State Basic Research Development Program of ChinaProject(07JJ6053) supported by Hunan Provincial Natural Science Foundation of China
文摘The rapeseed oil extracted from the mature seeds was purified by refining processing,and the rheological characteristic analysis of the viscosity and dynamic shear rate at gradient temperatures was made.The result shows that at 20,40,60 and 80 ℃ respectively,when the shear rate gradually rises,the torque increases accordingly but its viscosity does not vary distinctly.The result suggests that when rapeseed oil is used as the raw of edible oils and industries,the working procedures at high temperature will not influence its rheological characteristic distinctly.
基金Projects(10472134,50490274) supported by the National Natural Science Foundation of China
文摘Petroleum and nature gas not only are important resources,but also are important strategic materials of our country.All methods the enhancing the producing degree of petroleum and natural gas reservoir,increasing single well production and extending the stimulation period of validity are important stratagem for petroleum and natural gas exploitation.Fracturing and acidizing are the main methods for stimulation as well as one of representative examples of rheology theory application in engineering.Based on analysis of low permeability reservoir characteristics,the fracturing and acidizing stimulation principles and main controlling factors were discussed.And the mechanical characteristics,chemical reaction and rheological behavior in the stimulation process were reviewed.Furthermore research trends afterwards including the material and fluid rheology in oil and natural gas production process,the deep rock fracture initiation and extension rheology,and the fracturing and acidizing application rheology were also proposed in this paper.
基金supported by the National Natural Science Foundation of China (10972117)
文摘It is known that there exist obivious differences between the two most commonly used definitions of fractional derivatives-Riemann-Liouville (R-L) definition and Caputo definition. The multiple definitions of fractional derivatives in fractional calculus have hindered the application of fractional calculus in rheology. In this paper, we clarify that the R-L definition and Caputo definition are both rheologically imperfect with the help of mechanical analogues of the fractional element model (Scott-Blair model). We also clarify that to make them perfect rheologically, the lower terminals of both definitions should be put to ∞. We further prove that the R-L definition with lower terminal a →∞ and the Caputo definition with lower terminal a →∞ are equivalent in the differentiation of functions that are smooth enough and functions that have finite number of singular points. Thus we can define the fractional derivatives in rheology as the R-L derivatives with lower terminal a →∞ (or, equivalently, the Caputo derivatives with lower terminal a →∞) not only for steady-state processes, but also for transient processes. Based on the above definition, the problems of composition rules of fractional operators and the initial conditions for fractional differential equations are discussed, respectively. As an example we study a fractional oscillator with Scott-Blair model and give an exact solution of this equation under given initial conditions.
文摘Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oil slurries prepared by different kinds of oil varies differently during heating. The viscosity of the coal-oil slurry prepared by the catalytic cracking slurry (FCC) generally decreases during heating. However, the viscosity of the coal-oil slurry prepared by the high-temperature coal tar (CT) will peak at 338 ℃ during heating. The differences in viscosity variations of coal-oil slurries are analyzed. In addition to the temperature, the properties of the solvents and coal are the main influencing factors. Because the used coal contains a large number of polar functional groups, the swelling behavior of the coal in polar solvent (CT) is stronger than that in non-polar solvent (FCC). The swelling effect of the coal can result in the appearance of the viscosity peak. Therefore, before 100 ~C, the solvent molecules entering into the coal pores is the main influencing factor of coal-oil slurries viscosity variations. After 100 ℃, the increasing of particle size of coal particles is the main influencing factor of coal-oil slurries viscosity variations.
文摘Polymer injectivity is an important factor for evaluating the project economics of chemical flood,which is highly related to the polymer viscosity.Because the flow rate varies rapidly near injectors and significantly changes the polymer viscosity due to the non-Newtonian rheological behavior,the polymer viscosity near the wellbore is difficult to estimate accurately with the practical gridblock size in reservoir simulation.To reduce the impact of polymer rheology upon chemical EOR simulations,we used an efficient multilevel local grid refinement(LGR)method that provides a higher resolution of the flows in the near-wellbore region.An efficient numerical scheme was proposed to accurately solve the pressure equation and concentration equations on the multilevel grid for both homogeneous and heterogeneous reservoir cases.The block list and connections of the multilevel grid are generated via an efficient and extensible algorithm.Field case simulation results indicate that the proposed LGR is consistent with the analytical injectivity model and achieves the closest results to the full grid refinement,which considerably improves the accuracy of solutions compared with the original grid.In addition,the method was validated by comparing it with the LGR module of CMG_STARS.Besides polymer injectivity calculations,the LGR method is applicable for other problems in need of near-wellbore treatment,such as fractures near wells.
基金Supported by Guangzhou Science Technology and Innovation Commission(201508030019)China Scholarship Council(201506155073)National Undergraduate Innovative and Entrepreneurial Training Program(201610561089)
文摘Methylene bis(thiocyanate)(MBT) is insoluble in water, so suspension concentrate(SC) of MBT is extremely relied on surfactants. In this paper, SC of MBT was prepared with wet-grinding technology, and the effect of surfactants,such as Morwet D425(D425) and Morwet EFW(EFW)(two kinds of dispersant), on the Zeta potential and rheology behavior of MBT SC were investigated. The results showed that the Zeta potential absolute value of MBT SC increased with the increasing content of D425, and it decreased with the increasing content of EFW at acidic solution(pH = 4.5). In the combination system of D425 and EFW, Zeta potential of MBT SC decreased first and then increased with the increasing content of EFW. The relationship between shear rate(γ) and viscosity(η) was studied according to Herschel–Bulkley model: η = η0+ k/γ, and the relationship between shear rate(γ) and shear force(τ) was investigated according to:τ = τ0+Kγ~n. It was revealed that the mixed fluid belonged to Yield Pseudoplastic Fluid.
文摘Objectives: To compare the therapeutic effect of scalp electroacupuncture with that of conventional body acupuncture for apoplexy (wind stroke) and to observe the influence of both acupuncture therapies on hemorheology of ischemic apoplexy.Methods: 183 patients, whose diseases are attributed to apoplexy according to the diagnostic criteria, are randomly divided into treatment group (93 cases) and control group (90 cases) and treated respectively with scalp electroacupuncture and conventional body acupuncture. 11 items of hemorheology of patients’ blood samples are tested with NXE-1 Viscometer which are taken in the early morning before and after treatment under fasting condition. Results: Both scalp electroacupuncture and conventional body acupuncture exert therapeutic effect for apoplexy, but the effect of scalp electroacupuncture is obviously better than that of conventional acupuncture (P< 0.05 ); both treatment group and control group are statistically significant in reducing plasma viscosity, high shear reduced viscosity, low shear reduced viscosity, erythrocyte sedimentation rate, hematocrit and fibrinogen, (P<0.01 and 0.05); while the treatment group is statistically significant in reducing whole blood viscosity, ratio of whole blood viscosity, erythrocyte index of rigidity and electrophoresis time of erythrocyte (P<0.01~ 0.05), but the control group is not significant statistically in influencing these indexes (P>0.05).
文摘The present study investigates the effects of incorporating oat bran(OB) into Chinese steamed bread(CSB). Different levels(5%, 10% and 15%) of OB were used to replace wheat flour in the manufacture of CSB. The rheological properties of the dough were measured(water absorption(WA), development time, mixing tolerance, extensibility and stickiness). The addition of OB significantly increased WA, development time and stickiness, whereas decreased extensibility of dough. The physical properties of CSB were determined using specific volume, loaf height, moisture, and texture analysis. The nutritional quality of the bread was also analysed using an in vitro digestion method mimicking intestinal digestion. The results illustrated that the incorporation of OB into wheat flour decreases specific volume and softness of CSB. The addition of OB decreased the glycaemic response of steamed bread.This study illustrates the potential addition of OB to improve the nutritional quality of CSB.
文摘The average stretching direction,local rotation angular,and stretching ratio parameters of molecular trains were used to express the rheology deformation.Based on this micro geometrical deformation,the macro deformation of medium was expressed.Then,using intrinsic elasticity concept,the stress-strain relation was obtained.In this theoretic formulation,the response functions of extension ratio and rotation angular were used to express the rheology feature of medium.For medium composed by incompressible molecular trains,the local rotation angular divides rheology deformation into three kinds:viscoelastic deformation or elasticity enhancement,viscoplastic deformation or elasticity degenerate and constant elasticity range.These results explain the experimental features of rheology deformation well.