Effect of Ultraviolet Radiation on Hsp70 Protein Expression in HaCaT Cells

Ultraviolet radiation by its wavelength is divided into: UVA, UVB and UVC. Only UVA and UVB manage to penetrate the ozone layer, but due to anthropological activities, all of them are capable of interacting with humans to a greater or lesser extent, and can generate adverse effects such as cellular stress when interacting with intra-and extracellular biomolecules. The skin is the first organ in contact with UV radiation, and the stress it generates can be analyzed by the expression of a bioindicator of cellular damage such as Hsp70. Therefore, the objective of the project was: to determine the effect of UVA, UVB and UVC radiation on HaCaT epithelial cells, by analyzing the expression of Hsp70. Materials and methods: HaCaT cells were cultured in vitro, which were irradiated with UVA, UVB and UVC light at different doses, to subsequently determine the degree of Hsp70 expression by Immunodetection by PAGE-SDS and Western Blot. Results: Basal expression of Hsp70 was observed in no irradiated HaCaT cells. When HaCaT cells were irradiated with UVA, UVB, UVC, an increase in this Hsp70 protein was observed. With UVA, a higher degree of expression was observed at a time of 30 minutes of irradiation. With UVB the highest expression shifted to a time of 20 minutes. With UVC, overexpression was observed after 10 minutes. Conclusion: UV radiation generates cellular stress on HaCaT cells, evaluated by the stress bioindicator Hsp70. According to the wavelength of UV radiation, those that have a shorter wavelength have a greater potential for cellular damage, such as UVC.

240 nm AlGaN-based deep ultraviolet micro-LEDs:size effect versus edge effect

240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge effects.Here,it is revealed that the peak optical output power increases by 81.83%with the size shrinking from 50.0 to 25.0μm.Thereinto,the LEE increases by 26.21%and the LEE enhancement mainly comes from the sidewall light extraction.Most notably,transversemagnetic(TM)mode light intensifies faster as the size shrinks due to the tilted mesa side-wall and Al reflector design.However,when it turns to 12.5μm sized micro-LEDs,the output power is lower than 25.0μm sized ones.The underlying mechanism is that even though protected by SiO2 passivation,the edge effect which leads to current leakage and Shockley-Read-Hall(SRH)recombination deteriorates rapidly with the size further shrinking.Moreover,the ratio of the p-contact area to mesa area is much lower,which deteriorates the p-type current spreading at the mesa edge.These findings show a role of thumb for the design of high efficiency micro-LEDs with wavelength below 250 nm,which will pave the way for wide applications of deep ultraviolet(DUV)micro-LEDs.

Ultraviolet‑Irradiated All‑Organic Nanocomposites with Polymer Dots for High‑Temperature Capacitive Energy Storage

Polymer dielectrics capable of operating efficiently at high electric fields and elevated temperatures are urgently demanded by next-generation electronics and electrical power systems.While inorganic fillers have been extensively utilized to improved high-temperature capacitive performance of dielectric polymers,the presence of thermodynamically incompatible organic and inorganic components may lead to concern about the long-term stability and also complicate film processing.Herein,zero-dimensional polymer dots with high electron affinity are introduced into photoactive allyl-containing poly(aryl ether sulfone)to form the all-organic polymer composites for hightemperature capacitive energy storage.Upon ultraviolet irradiation,the crosslinked polymer composites with polymer dots are efficient in suppressing electrical conduction at high electric fields and elevated temperatures,which significantly reduces the high-field energy loss of the composites at 200℃.Accordingly,the ultraviolet-irradiated composite film exhibits a discharged energy density of 4.2 J cm^(−3)at 200℃.Along with outstanding cyclic stability of capacitive performance at 200℃,this work provides a promising class of dielectric materials for robust high-performance all-organic dielectric nanocomposites.

High-speed performance self-powered short wave ultraviolet radiation detectors based onκ(ε)-Ga_(2)O_(3)

High-speed solar-blind short wavelength ultraviolet radiation detectors based onκ(ε)-Ga_(2)O_(3)layers with Pt contacts were demonstrated and their properties were studied in detail.Theκ(ε)-Ga_(2)O_(3)layers were deposited by the halide vapor phase epitaxy on patterned GaN templates with sapphire substrates.The spectral dependencies of the photoelectric properties of struc-tures were analyzed in the wavelength interval 200-370 nm.The maximum photo to dark current ratio,responsivity,detectiv-ity and external quantum efficiency of structures were determined as:180.86 arb.un.,3.57 A/W,1.78×10^(12) Hz^(0.5)∙cm·W^(-1) and 2193.6%,respectively,at a wavelength of 200 nm and an applied voltage of 1 V.The enhancement of the photoresponse was caused by the decrease in the Schottky barrier at the Pt/κ(ε)-Ga_(2)O_(3)interface under ultraviolet exposure.The detectors demon-strated could functionalize in self-powered mode due to built-in electric field at the Pt/κ(ε)-Ga_(2)O_(3)interface.The responsivity and external quantum efficiency of the structures at a wavelength of 254 nm and zero applied voltage were 0.9 mA/W and 0.46%,respectively.The rise and decay times in self-powered mode did not exceed 100 ms.

Low-Voltage IGZO Field-Effect Ultraviolet Photodiode

In the era of Internet of Things(Io Ts),an energy-efficient ultraviolet(UV)photodetector(PD)is highly desirable considering the massive usage scenarios such as environmental sterilization,fire alarm and corona discharge monitoring.So far,common self-powered UV PDs are mainly based on metal-semiconductor heterostructures or p–n heterojunctions,where the limited intrinsic built-in electric field restricts further enhancement of the photoresponsivity.In this work,an extremely low-voltage field-effect UV PD is proposed using a gatedrain shorted amorphous IGZO(a-IGZO)thin film transistor(TFT)architecture.A combined investigation of the experimental measurements and technology computer-aided design(TCAD)simulations suggests that the reverse current(ⅠR)of field-effect diode(FED)is highly related with the threshold voltage(Vth)of the parental TFT,implying an enhancement-mode TFT is preferable to fabricate the field-effect UV PD with low dark current.Driven by a low bias of-0.1 V,decent UV response has been realized including large UV/visible(R_(300)/R_(550))rejection ratio(1.9×10^(3)),low dark current(1.15×10^(-12)A)as well as high photo-to-dark current ratio(PDCR,~10^(3))and responsivity(1.89 A/W).This field-effect photodiode provides a new platform to construct UV PDs with well-balanced photoresponse performance at a low bias,which is attractive for designs of large-scale smart sensor networks with high energy efficiency.

Nitric oxide removal from flue gas coupled with the Fe^(Ⅱ)EDTA regeneration by ultraviolet irradiation

During wet complexation denitrification of flue gas,Fe^(Ⅱ)EDTA regeneration,also known as reducing Fe^(Ⅱ)EDTA and Fe^(Ⅱ)EDTA-nitric oxide(NO)to Fe^(Ⅱ)EDTA,is crucial.In this paper,ultraviolet(UV)light was used for the first time to reduce Fe^(Ⅱ)EDTA-NO.The experimental result demonstrated that Fe^(Ⅱ)EDTA-NO reduction rate increased with UV power increasing,elevated temperature,and initial Fe^(Ⅱ)EDTA-NO concentration decreasing.Fe^(Ⅱ)EDTA-NO reduction rate increased first and then decreased as pH value increased(2.0-10.0).Fe^(Ⅱ)EDTA-NO reduction with UV irradiation presented a first order reaction with respect to Fe^(Ⅱ)EDTA-NO.Compared with other Fe^(Ⅱ)EDTA regeneration methods,Fe^(Ⅱ)EDTA regeneration with UV show more superiority through comprehensive consideration of regeneration rate and procedure.Subsequently,NO absorption experiment by Fe^(Ⅱ)EDTA solution with UV irradiation confirmed that UV can significantly promote the NO removal performance of Fe^(Ⅱ)EDTA.Appropriate oxygen concentration(3%(vol))and acidic environment(pH=4)was favorable for NO removal.With UV power increasing as well as temperature decreasing,NO removal efficiency rose.In addition,the mechanism research indicates that NO from flue gas is mostly converted to NO_(2)-,NO_(3)-,NH_(4)^(+),N_(2),and N_(2)O with Fe^(Ⅱ)EDTA absorption liquid with UV irradiation.UV strengthens NO removal in Fe^(Ⅱ)EDTA absorption liquid by forming a synergistic effect of oxidation-reduction-complexation.Finally,compared with NO removal methods with Fe^(Ⅱ)EDTA,Fe^(Ⅱ)EDTA combined UV system shows prominent technology advantage in terms of economy and secondary pollution.

Effect of combination of ultraviolet radiation and biocide on fungal-induced corrosion of high-strength 7075 aluminum alloy

The effect of ultraviolet(UV)radiation and biocide benzalkonium chloride(BKC)on fungal-induced corrosion of AA7075 induced by Aspergillus terreus(A.terreus)was deeply studied using analysis of biological activity,surface analysis,and electrochemical measurements.Results demonstrated that the planktonic and sessile spore concentrations decline by more than two orders of magnitude when UV radiation and BKC are combinedly used compared with the control.UV radiation can inhibit the biological activity of A.terreus and influence the stability of passive film of AA7075.Except for direct disinfection,the physical adsorption of BKC on the specimen can effectively inhibit the attachment of A.terreus.The combination of UV radiation and BKC can much more effectively inhibit the corrosion of AA,especially pitting corrosion,due to their synergistic effect.The combined application of UV radiation and BKC can be a good method to effectively inhibit fungal-induced corrosion.

Ultraviolet Photodetector based on Sr_(2)Nb_(3)O_(10) Perovskite Nanosheets

Liquid-phase exfoliation was employed to synthesize Sr_(2)Nb_(3)O_(10) perovskite nanosheets with thicknesses down to 1.76 nm.Transmission electron microscopy(TEM),atomic force microscope(AFM),X-ray photoelectron spectrometer(XPS),and other characterization techniques were used to evaluate the atomic structure and chemical composition of the exfoliated nanosheets.A UV photodetector based on individual Sr_(2)Nb_(3)O_(10) nanosheets was prepared to demonstrate the application of an ultraviolet(UV) photodetector.The UV photodetector exhibited outstanding photocurrent and responsivity with a responsivity of 3×10^(5) A·W^(-1) at 5 V bias under 280 nm illumination,a photocurrent of 60 nA,and an on/off ratio of 3×10^(2).

Optimization of extreme ultraviolet vortex beam based on high harmonic generation

In high harmonic generation(HHG),Laguerre–Gaussian(LG) beams are used to generate extreme ultraviolet(XUV)vortices with well-defined orbital angular momentum(OAM),which have potential applications in fields such as microscopy and spectroscopy.An experimental study on the HHG driven by vortex and Gaussian beams is conducted in this work.It is found that the intensity of vortex harmonics is positively correlated with the laser energy and gas pressure.The structure and intensity distribution of the vortex harmonics exhibit significant dependence on the relative position between the gas jet and the laser focus.The ring-like structures observed in the vortex harmonics,and the interference of quantum paths provide an explanation for the distinct structural characteristics.Moreover,by adjusting the relative position between the jet and laser focus,it is possible to discern the contributions from different quantum paths.The optimization of the HH vortex field is applicable to the XUV,which opens up a new way for exploiting the potential in optical spin or manipulating electrons by using the photon with tunable orbital angular momentum.

Wavelength calibration and spectral analysis of vacuum ultraviolet spectroscopy in EAST

A vacuum ultraviolet(VUV)spectroscopy with a focal length of 1 m has been engineered specifically for observing edge impurity emissions in Experimental Advanced Superconducting Tokamak(EAST).In this study,wavelength calibration for the VUV spectroscopy is achieved utilizing a zinc lamp.The grating angle and charge-coupled device(CCD)position are carefully calibrated for different wavelength positions.The wavelength calibration of the VUV spectroscopy is crucial for improving the accuracy of impurity spectral data,and is required to identify more impurity spectral lines for impurity transport research.Impurity spectra of EAST plasmas have also been obtained in the wavelength range of 50–300 nm with relatively high spectral resolution.It is found that the impurity emissions in the edge region are still dominated by low-Z impurities,such as carbon,oxygen,and nitrogen,albeit with the application of fulltungsten divertors on the EAST tokamak.

Summary of a Life in Observational Ultraviolet/Optical Astronomy

I reminisce on my early life in Section 1;on my education in Sections 2 and 3;on the years at Princeton as a research astronomer in Section 4;on the years on the faculty at Chicago in Section 5;on research on Diffuse Interstellar Bands(DIBs) in Section 6;on construction of the 3.5 m telescope at Apache Point Observatory(APO)in Section 7;on work on the Sloan Digital Sky Survey(SDSS) in Section 8;on work in public education in Chicago in Section 9;and on my travels in Section 10. My main science research is of an observational nature,concerning Galactic and intergalactic interstellar gas. Highlights for me included my work on the orbiting telescope Copernicus, including the discovery of interstellar deuterium;early observations of absorption associated with fivetimes ionized oxygen;and discoveries concerning the phases of gas in the local interstellar medium, based on previously unobservable interstellar UV spectral lines. With other instruments and collaborations, I extended interstellar UV studies to the intergalactic cool gas using quasi-stellar object QSO absorption lines redshifted to the optical part of the spectrum;provided a better definition of the emission and morphological character of the source of absorption lines in QSO spectra;and pursued the identification of the unidentified DIBs. For several of these topics, extensive collaborations with many scientists were essential over many years. The conclusions developed slowly, as I moved from being a graduate student at Chicago, to a research scientist position at Princeton and then to a faculty position at Chicago. At each stage of life, I was exposed to new technologies adaptable to my science and to subsequent projects. From high school days, I encountered several management opportunities which were formative. I have been extremely fortunate both in scientific mentors I had and in experimental opportunities I encountered.

Research on the Performance of Non-Line-of-Sight Ultraviolet Communication in Rain and Fog Environment

Wireless ultraviolet communication is a new type of communication mode. It refers to the transmission of information through the scattering of ultraviolet light by atmospheric particles and aerosol particles. The scattering characteristics can enable the wireless ultraviolet communication system to transmit ultraviolet light signals in a non-line-of-sight manner, which overcomes the weakness that other free space optical communications must work in a line-of-sight manner. Based on the basic theory of scattering and absorption in atmospheric optics, taking the ultraviolet light with a wavelength of 266 nm as an example, this paper introduces the classical model of non-line-of-sight single-scattering coplanarity based on the ellipsoid coordinate system. The model is used to simulate and analyze the relationship between the geometric parameters such as transmission distance, transceiver elevation angle and transceiver half-angle and the received optical power per unit area. The performance of non-line-of-sight ultraviolet communication system in rain and fog environment is discussed respectively. The results show that the transmission quality of non-line-of-sight ultraviolet atmospheric propagation is greatly affected by the communication distance. As the distance increases, the received light power per unit area gradually decreases. In addition, increasing the emission elevation angle, the receiving elevation angle and the receiving half angle is an important way to improve the system performance.

Research advances on the biological effects of elevated ultraviolet-B radiation on terrestrial plants

This review describes the effects of ultraviolet-B （UV-B） radiation on plant growth and development, photosynthesis and photosynthetic pigments and UV-B absorbing compounds. Moreover, plant ecosystem level responses to elevated UV-B radiation and interactions of UV-B radiation with abiotic and biotic factors were also involved. Results collected in this review suggest that approximately two-thirds terrestrial plant species are significantly affected by increase in UV-B radiation, The majority of evidences indicate that elevated UV-B radiation is usually detrimental but there exists tremendous variability in the sensitivity of species to UV-B radiation, and sensitivity also differs among cultivars of the same species.

Anti-ultraviolet aging tests of asphalts adapting to environment in Tibetan Plateau of China

Ultraviolet （UV） aging is one of the main factors which cause premature damage of asphalt pavements in the Tibetan Plateau, China. According to the measured levels of UV radiation, aging tests of styrene-butadiene rubber （SBR） asphalts with different contents of three anti-UV-aging agents including nano-TiO2, CeO2 and carbon black are performed. Common indices, which include retained penetration after thin film oven tests （TFOT） and softening point, and strategic highway research program （SHRP） indices of aged asphalts are evaluated. Infrared absorption spectral analysis is performed on asphalt specimens with 0. 8% carbon black which have been aged for different aging times （500, 1000 and 1 500 h）. By grey incidence analysis, the optimal contents of anti-UV-aging agents are determined. The results show that TiO2 and CeO2 are not only good UV absorbing or shielding agents, but also strong oxidants. Carbon black is a good anti-UV-aging agent, and its optimal content is about 0. 8% of asphalt weight. UV aging of asphalt mainly occurs in the early stages of aging. The longer the aging time, the more severe the aging of asphalt.

Ultraviolet Source Assisted Enhancement of Attosecond Pulse

A promising method to improve the attosecond pulse intensity has been theoretically pre- sented by properly adding an ultraviolet pulse into the orthogonal two-color field. The results show that by properly adding a 125 nm ultraviolet pulse to the orthogonal two-color field, not only the harmonic yield is enhanced by 2 orders of magnitude compared with the original orthogonal two-color field case, but also the single short quantum path, which is selected to contribute to the harmonic spectrum, results in an ultrabroad 152 eV bandwidth. Moreover, by optimizing the laser parameters, we find that the harmonic enhancement is not very sen- sitive to the pulse duration and the polarized angle of the assisted ultraviolet pulse, which is much better for experimental realization. As a result, an isolated pulse with duration of 38 as can be obtained, which is 2 orders of magnitude improvement in comparison with the original two-color orthogonal field case.

The Action of Aloe Anthraquinones in Protecting the Growth of Soybean from Ultraviolet Radiation Stress

In order to investigate the protective effect of aloe anthraquinones on growth and development of soybean against ultraviolet B radiation stress from the morphological structure and physio-chemical indices. The results showed that, stressed by the enhanced ultraviolet b radiation, the soybean gave a dwarfed plant, shrunken leaf area and decreased photosynthetic pigment, while an ascended MDA content. Spraying aloe anthraquinones effectively relieved the reductions of chloro- phyll content and biomass and decreased the production of MDA under the radia- tion of UV-B. Moreover, under the UV-B radiation, waxy substances on epidermal cells increased remarkably and the stomas showed obvious subsidence, while spraying aloe anthraquinones could maintain the structure and shape of cells similar to that under natural light, and the stomas subsidence as well.

Deep-ultraviolet integrated photonic and optoelectronic devices:A prospect of the hybridization of group Ⅲ–nitrides, Ⅲ–oxides,and two-dimensional materials

Progress in the design and fabrication of ultraviolet and deep-ultraviolet groupⅢ–nitride optoelectronic devices,based on aluminum gallium nitride and boron nitride and their alloys,and the heterogeneous integration with two-dimensional and oxide-based materials is reviewed.We emphasize wide-bandgap nitride compound semiconductors(i.e.,(B,Al,Ga)N)as the deep-ultraviolet materials of interest,and two-dimensional materials,namely graphene,two-dimensional boron nitride,and two-dimensional transition metal dichalcogenides,along with gallium oxide,as the hybrid integrated materials.We examine their crystallographic properties and elaborate on the challenges that hinder the realization of efficient and reliable ultraviolet and deep-ultraviolet devices.In this article we provide an overview of aluminum nitride,sapphire,and gallium oxide as platforms for deep-ultraviolet optoelectronic devices,in which we criticize the status of sapphire as a platform for efficient deep-ultraviolet devices and detail advancements in device growth and fabrication on aluminum nitride and gallium oxide substrates.A critical review of the current status of deep-ultraviolet light emission and detection materials and devices is provided.

Line identification of boron and nitrogen emissions in extreme-and vacuumultraviolet wavelength ranges in the impurity powder dropping experiments of the Large Helical Device and its application to spectroscopic diagnostics

An impurity powder dropper was installed in the 21 st campaign of the Large Helical Device experiment(Oct.2019–Feb.2020)under a collaboration between the National Institute for Fusion Science and the Princeton Plasma Physics Laboratory for the purposes of real-time wall conditioning and edge plasma control.In order to assess the effective injection of the impurity powders,spectroscopic diagnostics were applied to observe line emission from the injected impurity.Thus,extreme-ultraviolet(EUV)and vacuum-ultraviolet(VUV)emission spectra were analyzed to summarize observable impurity lines with B and BN powder injection.Emission lines released from B and N ions were identified in the EUV wavelength range of 5–300Ameasured using two grazing incidence flat-field EUV spectrometers and in the VUV wavelength range of 300–2400Ameasured using three normal incidence 20 cm VUV spectrometers.BI–BV and NIII–NVII emission lines were identified in the discharges with the B and BN powder injection,respectively.Useful B and N emission lines which have large intensities and are isolated from other lines were successfully identified as follows:BI(1825.89,1826.40)A(blended),BII 1362.46A,BIII(677.00,677.14,677.16)A(blended),BIV 60.31A,BV 48.59A,NIII(989.79,991.51,991.58)A(blended),NIV765.15A,NV(209.27,209.31)A(blended),NVI 1896.80A,and NVII 24.78A.Applications of the line identifications to the advanced spectroscopic diagnostics were demonstrated,such as the vertical profile measurements for the BV and NVII lines using a space-resolved EUV spectrometer and the ion temperature measurement for the BII line using a normal incidence 3 m VUV spectrometer.

Photodegradation of perfluorooctanoic acid by 185 nm vacuum ultraviolet light

The photodegradation of persistent and bioaccumulative perftuorooctanoic acid （PFOA） in water by 185 nm vacuum ultraviolet （VUV） light was examined to develop an effective technology to deal with PFOA pollution. PFOA degraded very slowly under irradiation of 254 nm UV light. However, 61.7% of initial PFOA was degraded by 185 nm VUV light within 2 h, and defluorination ratio reached 17.1%. Pseudo first-order-kinetics well simulated its degradation and defluorination. Besides, fluoride ion formed in water, 4 shorter-chain perfluorinated carboxylic acids （PFCAs）, that is, perfluoroheptanoic acid, perfluorohexanoic acid, perfluoropentanoic acid, and perfluorobutanoic acid. These were identified as intermediates by LC-MS measurement. These PFCAs consecutively formed and further degraded with irradiation time. According to the mass balance calculation, no other byproducts were formed. It was proposed that PFCAs initially are decarboxylated by 185 nm light, and the radical thus formed reacts with water to form shorter-chain PFCA with one less CF2 unit.

Bromate ion formation in dark chlorination and ultraviolet/chlorination processes for bromide-containing water

Bormate （BrO3^-） is a carcinogenic chemical produced in ozonation or chlorination of bromide-containing water. Although its formation in seawater with or without sunlight has been previously investigated, the formation of bromate in dilute solutions, particularly raw water for water treatment plant, is unknown. In this article, the results of bench scale tests to measure the formation rates of bromate formation in dilute solutions, including de-ionized water and raw water from Yangtze River, were presented in dark chlorination and ultraviolet （UV）/chlorination processes. And the effects of initial pH, initial concentration of NaOCl, and UV light intensity on bromate formation in UV/chlorination of the diluted solutions were investigated. Detectable bromate was formed in dark chlorination of the two water samples with a relatively slow production rate. Under routine disinfecting conditions, the amount of formed bromate is not likely to exceed the national standards （10 μg/L）. UV irradiation enhanced the decay of free chlorine, and, simultaneously, 6.6%-32% of Br^- was oxidized to BrO3^-. And the formation of bromate exhibited three stages： rapid stage, slow stage and plateau. Under the experimental conditions （pH = 4.41-11.07, CCl2= 1.23-4.50 mg/L）, low pH and high chlorine concentration favored the generation of bromate. High light intensity promoted the production rate of bromate, but decreased its total generation amount due to acceleration of chlorine decomposition.