Growth of RB Population in the Conversion Phase of Chlamydia Life Cycle

Upon infecting a host cell,the reticulate body(RB)form of the Chlamydia bacteria simply proliferates by binary fission for an extended period.Available data show only RB units in the infected cells 20 hours post infection(hpi),spanning nearly half way through the development cycle.With data collected every 4 hpi,conversion to the elementary body(EB)form begins abruptly at a rapid rate sometime around 24 hpi.By modeling proliferation and conversion as simple birth and death processes,it has been shown that the optimal strategy for maximizing the total(mean)EB population at host cell lysis time is a bang-bang control qualitatively replicating the observed conversion activities.However,the simple birth and death model for the RB proliferation and conversion to EB deviates in a significant way from the available data on the evolution of the RB population after the onset of RB-to-EB conversion.By working with a more refined model that takes into account a small size threshold eligibility requirement for conversion noted in the available data,we succeed in removing the deficiency of the previous models on the evolution of the RB population without affecting the optimal bang-bang conversion strategy.

Life Review the Impact of Combined Watson Care Theory Intervention on Psychological Status and Quality of Life in Patients with Terminal Lung Cancer

Objective: To analyze the impact of combined Watson care theory intervention on the psychological state and quality of life in patients with terminal lung cancer. Methods: 72 patients with terminal lung cancer admitted from March 2021 to January 2024 were selected, which were divided into research group (life review combined with Watson care theory intervention) and control group (conventional intervention), with 36 cases each. Compare the nursing effect between the two groups. Results: The anxiety self-rating scale (SAS) and depression self-rating scale (SDS) scores were significantly lower than those of the control group, and the quality of life score was significantly higher than that of the control group (P < 0.05). Conclusion: Life review combined with Watson care theory intervention can improve the psychological state and improve the quality of life of patients with terminal lung cancer.

Tailoring Mg^(2+)Solvation Structure in a Facile All-Inorganic[Mg_(x)Li_(y)Cl2_(x+y)·nTHF]Complex Electrolyte for High Rate and Long Cycle-Life Mg Battery

A high-performance all-inorganic magnesium-lithium chloride complex(MLCC)electrolyte is synthesized by a simple room-temperature reaction of LiCl with MgCl_(2) in tetrahydrofuran(THF)solvent.Molecular dynamics simulation,density functional theory calculation,Raman spectroscopy,and nuclear magnetic resonance spectroscopy reveal that the formation of[Mg_(x)Li_(y)Cl_(2x+y)·nTHF]complex solvation structure significantly lowers the coordination number of THF in the first solvation sheath of Mg^(2+),which significantly enhances its de-solvation kinetics.The MLCC electrolyte presents a stable electrochemical window up to 3.1 V(vs Mg/Mg^(2+))and enables reversible cycling of Mg metal deposition/stripping with an outstanding Coulombic efficiency up to 99%at current densities as high as 10 mA cm^(-2).Utilizing the MLCC electrolyte,a Mg/Mo_(6)S_(8) full cell can be cycled for over 10000 cycles with a superior capacity retention of 85 mA h g^(-1) under an ultrahigh rate of 50 C(1 C=128.8 mA g^(-1)).The facile synthesis of highperformance MLCC electrolyte provides a promising solution for future practical magnesium batteries.

Life Cycle Assessment Introduced by Using Nanorefrigerant of Organic Rankine Cycle System for Waste Heat Recovery

The use of nanorefrigerants in Organic Rankine Cycle(ORC)units is believed to affect the cycle environment performance,but backed with very few relevant studies.For this purpose,a life cycle assessment(LCA)has been performed for the ORC system using nanorefrigerant,the material and energy input,characteristic indicators and comprehensive index of environmental impact,total energy consumption and energy payback time(BPBT)of the whole life cycle of ORC system using Al_(2)O_(3)/R141b nanorefrigerant were calculated.Total environmental comprehensive indexes reveal that ECER-135 index decrease by 1.5%after adding 0.2%Al_(2)O_(3)nanoparticles to R141b.Based on the contribution analysis and sensitivity analysis,it can be found out ORC system manufacturing is of the most critical stage,where,the ECER-135 index of ORC component production is the greatest,followed by the preparation process of R141b,transportation phase,and that of Al_(2)O_(3)nanoparticles preparation is small.The retirement phase which has good environmental benefits affects the result significantly by recycling important materials.Meanwhile,the main cause and relevant suggestion for improvement were traced respectively.Finally,the environmental impacts of various power generations were compared,and results show that the power route is of obvious advantage.Among the renewable energy,ORC system using Al_(2)O_(3)/R141b nanorefrigerant with minimal environmental impact is only 0.67%of coal-fired power generation.The environmental impact of current work is about 14.34%of other nations’PV results.

Carbon footprint accounting for cigar production processes: A life cycle assessment perspective

Although the tobacco industry is a significant contributor to energy consumption and carbon emissions its negative environmental impact has received inadequate attention globally.Cigarette factories are a key link in the tobacco industry’s production chain,and using data provided by a cigarette factory in China we conduct a life cycle assessment to account for the carbon footprint of cigar production in cigarette factories.The results of the assessment show that factory air conditioning is the most important contributor to the environmental load of the cigar manufacturing process,while electricity is the key factor that contributes the greatest envi‐ronmental load across all of the processes in the product life cycle.In addition,packaging,including small boxes and cigarette cartons,has a significant impact on the industry’s environmental footprint due to its use of raw materials.We find the carbon footprint of the entire production process for cigar products to be 383.59 kg CO_(2) eq.Based on our findings,we suggest ways to optimize cigar/cigarette factory processes to re‐duce carbon emissions that can help to promote sustainable development in related industries.

Zr-doping stabilizes spinel LiMn_(2)O_(4)as a low cost long cycle life cathode for lithium ion batteries

The present commercial spinel LiMn_(2)O_(4) delivers only 90 m Ah/g–115 m Ah/g,far lower than the theoretical specific capacity.It degrades fast caused by the Jahn–Teller effect,Mn dissolution and related side reactions that consume Li inventory.In this work,Zr doping is employed to improve the structural stability and electrochemical performance of spinel LiMn_(2)O_(4).Li_(1.06)Mn_(1.94-x)Zr_xO_4(x=0,0.01,0.02,0.04)have been successfully synthesized by a simple solid-state reaction method and evaluated as cathode for lithium ion batteries(LIB).Li_(1.06)Mn_(1.92)Zr_(0.02)O_4 is superior cathode material with a high capacity of 122 m Ah/g at 1-C rate;long cycle stability,98.39%retention after 100 cycles at 1-C rate,excellent high rate performance 107.1 m Ah/g at 10-C rate,and high temperature performance 97.39%retention after 60 cycles.These are thought to be related to Zr doping effectively stabilizing the spinel LiMn_(2)O_(4),by forming stronger Zr–O bonds in the octahedron,suppressing the Jahn–Teller effect,thus improving electrochemical performance.

Carbon emissions reduction potentiality for railroad transportation based on life cycle assessment

This study addresses the comparative carbon emissions of different transportation modes within a unified evaluation framework,focusing on their carbon footprints from inception to disposal.Specifically,the entire life cycle carbon emissions of High-Speed Rail(HSR),battery electric vehicles,conventional internal combustion engine vehicles,battery electric buses,and conventional internal combustion engine buses are analyzed.The life cycle is segmented into vehicle manufacturing,fuel or electricity production,operational,and dismantlingrecycling stages.This analysis is applied to the Beijing-Tianjin intercity transportation system to explore emission reduction strategies.Results indicate that HSR demonstrates significant carbon emission reduction,with an intensity of only 24%-32% compared to private vehicles and 47%-89% compared to buses.Notably,HSR travel for Beijing-Tianjin intercity emits only 24% of private vehicle emissions,demonstrating the emission reduction benefits of transportation structure optimization.Additionally,predictive modeling reveals the potential for carbon emission reduction through energy structure optimization,providing a guideline for the development of effective transportation management systems.

Design of Fine Life Cycle Prediction System for Failure of Medical Equipment

The inquiry process of traditional medical equipment maintenance management is complex,which has a negative impact on the efficiency and accuracy of medical equipment maintenance management and results in a significant amount of wasted time and resources.To properly predict the failure of medical equipment,a method for failure life cycle prediction of medical equipment was developed.The system is divided into four modules:the whole life cycle management module constructs the life cycle data set of medical devices from the three parts of the management in the early stage,the middle stage,and the later stage;the status detection module monitors the main operation data of the medical device components through the normal value of the relevant sensitive data in the whole life cycle management module;and the main function of the fault diagnosis module is based on the normal value of the relevant sensitive data in the whole life cycle management module.The inference machine diagnoses the operation data of the equipment;the fault prediction module constructs a fine prediction system based on the least square support vector machine algorithm and uses the AFS-ABC algorithm to optimize the model to obtain the optimal model with the regularized parameters and width parameters;the optimal model is then used to predict the failure of medical equipment.Comparative experiments are designed to determine whether or not the design system is effective.The results demonstrate that the suggested system accurately predicts the breakdown of ECG diagnostic equipment and incubators and has a high level of support and dependability.The design system has the minimum prediction error and the quickest program execution time compared to the comparison system.Hence,the design system is able to accurately predict the numerous causes and types of medical device failure.

Analysis on Sustainable Development of Tire Industry Cluster based on Life Cycle Theory

The research on the tire industry cluster based on life cycle theory can be carried out by a four stage periods,namely initial period,growth period,maturity period,and recession period.This paper analyzes on the possible risks taken in each life cycle period as well as proposes corresponding suggestions to strengthen the research by looking into the conditions and factors of the continuous sustainable development process in a tire industry.

Research on Ecological Assessment and Dynamic Optimization of Energy-saving and New Energy Vehicle Business Model Based on Full Life Cycle Theory

The rapid development of China’s automobile industry has brought ever-increasing impact on resources,energy and environment,the energy-saving and new energy vehicles come into being accordingly.This article firstly systematically introduces the technical route of energy-saving and new energy vehicles of China,focusing on the key bottleneck problems arising from the construction process of current assessment system of the technical route for energy-saving and new energy vehicles,establishes the energy-saving and new energy vehicle business model assessment index system afterward based on the comparative analysis on energy-saving and new energy vehicle business assessment model and the full life cycle theory,and finally makes prospects and forecasts on vital problems of system boundary,dynamic optimization,simulation system of full life cycle assessment of energy-saving and new energy vehicle.

Prelithiation Enhances Cycling Life of Lithium-Ion Batteries:A Mini Review

During the last decade,the rapid development of lithium-ion battery(LIB)energy storage systems has provided significant support for the efficient operation of renewable energy stations.In the coming years,the service life demand of energy storage systems will be further increased to 30 years from the current 20 years on the basis of the equivalent service life of renewable energy stations.However,the life of the present LIB is far from meeting such high demand.Therefore,research on the next-generation LIB with ultra-long service life is imminent.Prelithiation technology has been widely studied as an important means to compensate for the initial coulombic efficiency loss and improve the service life of LIBs.This review systematically summarized the different prelithiation methods from anode and cathode electrodes.Moreover,the large-scale industrialization challenge and the possibility of the existing prelithiation technology are analyzed,based on three key parameters:industry compatibility,prelithiation efficiency,and energy density.Finally,the future trends of improvement in LIB performance by other overlithiated cathode materials are presented,which gives a reference for subsequent research.

Chinese life cycle impact assessment factors

The methodological basis and procedures for determination of Chinese normalization references and weighting factors according to the EDIP-method is described. According to Chinese industrial development intensity and population density, China was divided into three regions and the normalization references for each region were calculated on the basis of an inventory of all of the region's environmental emissions in 1990. The normalization reference was determined as the total environmental impact potential for the area in question in 1990(EP(j)90) divided by the population. The weighting factor was determined as the normalization reference (ER(j)90) divided by society's target contribution in the year 2000 based on Chinese political reduction plans, ER(j)T2000. This paper presents and discuss results obtained for eight different environmental impact categories relevant for China: global warming, stratospheric ozone depletion, acidification, nutrient enrichment, photochemical ozone formation and generation of bulk waste, hazardous waste and slag and ashes.

Overall Life Cycle Comprehensive Assessment of Pneumatic and Electric Actuator

Pneumatic actuators and electric actuators have almost been applied to all manufacturing industries. The two kinds of actuators can replace each other in most fields, such as the point to point transmission occasion and some rotating occasions. However, there are very few research results about the advantages and disadvantages of two kinds of actuators under the same working conditions so far. In this paper, a novel comprehensive assessment method, named as overall life cycle comprehensive assessment （OLCCA）, is proposed for comparison and assessment of pneumatic and electric actuators. OLCCA contains mechanical properties evaluation （MPE）, life cycle cost analysis based on users （LCCABOU） and life cycle environmental impact analysis （LCEIA） algorithm in order to solve three difficult problems： mechanical properties assessment, cost analysis and environmental impact assessment about actuators. The mechanical properties evaluation of actuators is a multi-objective optimization problem. The fuzzy data quantification and information entropy methods are combined to establish MPE algorithm of actuators. Two kinds of pneumatic actuators and electric actuators with similar bearing capacity and similar work stroke were taken for example to verify the correctness of MPE algorithm. The case study of MPE algorithm for actuators verified its correctness. LCCABOU for actuators is also set up. Considering cost complex structure of pneumatic actuators, public device cost even method （PDCEM） is firstly presented to solve cost division of public devices such as compressors, aftercooler, receivers, etc. LCCABOU method is also effective and verified by the three groups of pneumatic actuators and electric actuators. Finally, LCEIA model of actuators is established for the environmental impact assessment of actuators. LCEIA data collection method and model establishment procedure for actuators are also put forward. With Simapro 7, LCEIA comparison results of six actuators can be obtained： Fossil fuels are the major environmental factor of pneumatic and electric actuators; Environmental impact of electric actuator is large than one of pneumatic actuator under the similar mechanical properties and working conditions of pneumatic and electric actuators. The results are correct and correspond with the actual mechanical properties of actuators. This paper proposes a comprehensive evaluation method of the actuators, which can solve the critical problem that similar electromechanical products are very difficult to be compared with each other from the angle of performance, cost and environment impact.

Review of energy consumption research for papermaking industry based on life cycle analysis

Papermaking industry is a high-energy-consuming industry with long supply chain.The growth of paper product demand further intensifies the need of energy consumption.Energy saving through the full supply chain has become a focal point for long-term sustainable development of the papermaking industry.This paper reviews the advances in life cycle analysis for the papermaking industry in recent years.All the stages from the full supply chain are involved to give a panoramic overview of the papermaking industry.The object of this paper is to provide scientific basis to industry and decision-makers with profound understanding of the energy consumption and energy saving potential in a life cycle perspective.

CNTs@S composite as cathode for all-solid-state lithium-sulfur batteries with ultralong cycle life

The main challenges in development of traditional liquid lithium-sulfur batteries are the shuttle effect at the cathode caused by the polysulfide and the safety concern at the Li metal anode arose from the dendrite formation.All-solid-state lithium-sulfur batteries have been proposed to solve the shuttle effect and prevent short circuits.However,solid-solid contacts between the electrodes and the electrolyte increase the interface resistance and stress/strain,which could result in the limited electrochemical performances.In this work,the cathode of all-solid-state lithium-sulfur batteries is prepared by depositing sulfur on the surface of the carbon nanotubes(CNTs@S)and further mixing with Li10GeP2S12 electrolyte and acetylene black agents.At 60℃,CNTs@S electrode exhibits superior electrochemical performance,delivering the reversible discharge capacities of 1193.3,959.5,813.1,569.6 and 395.5 mAhg^-1 at the rate of 0.1,0.5,1,2 and 5 C,respectively.Moreover,the CNTs@S is able to demonstrate superior high-rate capability of 660.3 mAhg^-1 and cycling stability of 400 cycles at a high rate of 1.0 C.Such uniform distribution of the CNTs,S and Li10GeP2S12 electrolyte increase the electronic and ionic conductivity between the cathode and the electrolyte hence improves the rate performance and capacity retention.

Green evaluation of microwave-assisted leaching process of high titanium slag on life cycle assessment

A greenness evaluation index and system of microwave-assisted leaching method were established.The effects of the life cycle assessment variables,such as the resource consumption,environment impact,cost,time and quality,were investigated,and the concept of green degree was applied in the production of synthetic rutile.An analytic hierarchy process was utilized to assess matrix of greenness evaluation.The Gauss-Seidel iterative matrix method was employed to solve the assessment matrix and obtain the weights and membership functions of all evaluation indexes.A fuzzy decision-making method was applied to build the greenness evaluation model,and then the scores of green degree in microwave-assisted leaching process was obtained.The greenness evaluation model was applied to the life cycle assessment of the microwave-assisted leaching process.The results show that the microwave-assisted leaching process has advantages over the conventional ones,with respect to energy-consumption,processing time and environmental protection.

A techno-economic and life cycle assessment for the production of green methanol from CO_(2): catalyst and process bottlenecks

The success of catalytic schemes for the large-scale valorization of CO_(2) does not only depend on the development of active,selective and stable catalytic materials but also on the overall process design.Here we present a multidisciplinary study(from catalyst to plant and techno-economic/lifecycle analysis)for the production of green methanol from renewable H2 and CO_(2).We combine an in-depth kinetic analysis of one of the most promising recently reported methanol-synthesis catalysts(InCo)with a thorough process simulation and techno-economic assessment.We then perform a life cycle assessment of the simulated process to gauge the real environmental impact of green methanol production from CO_(2).Our results indicate that up to 1.75 ton of CO_(2) can be abated per ton of produced methanol only if renewable energy is used to run the process,while the sensitivity analysis suggest that either rock-bottom H2 prices(1.5$kg1)or severe CO_(2) taxation(300$per ton)are needed for a profitable methanol plant.Besides,we herein highlight and analyze some critical bottlenecks of the process.Especial attention has been paid to the contribution of H2 to the overall plant costs,CH4 trace formation,and purity and costs of raw gases.In addition to providing important information for policy makers and industrialists,directions for catalyst(and therefore process)improvements are outlined.

Life cycle inventory analysis of CO_2 and SO_2 emission of imperial smelting process for Pb-Zn smelter

Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and substitution method, the environmental impacts of co-products were allocated among the main products of zinc, lead and sulfuric acid. The related impacts were assessed by use of Global Warming Potential （GWP） and Acidification Potential （ACP）. The results show that the GWP index from 1998 to 2000 is 11.53, 11.65, 10.93 tCO2-eq/tZn respectively, the ACP index decreases from 14.88 kgSO2-eq/tZn in 1998 to 10.99 kgSO2-eq/tZn in 2000. Power and electricity generation, followed by smelting and zinc distillation, are mainly responsible for GWP. Sintering individually affects ACP. Reduction in greenhouse gas emissions of the ISP may come from energy conservation measures rather than from technological developments. And recycling more secondary Pb and Zn materials effectively treated by ISP, and reducing the amount of primary metal are the main ways to put SO2 emission under control.

Life cycle environmental impact assessment of biochar-based bioenergy production and utilization in Northwestern Ontario,Canada

Biochar-based bioenergy production and sub- sequent land application of biochar can reduce greenhouse gas emissions by fixing atmospheric carbon into the soil for a long period of time. A thorough life cycle assessment of biochar-based bioenergy production and biochar land application in Northwestern Ontario is conducted using SimaPro Ver. 8.1. The results of energy consumption and potential environmental impact of biochar-based bioenergy production system are compared with those of conventional coal-based system. Results show that biocbar land application consumes 4847.61 MJ per tonne dry feedstock more energy than conventional system, but reduces the GHG emissions by 68.19 kg CO2e per tonne of dry feed- stock in its life cycle. Biochar land application improves ecosystem quality by 18 %, reduces climate change by 15 %, and resource use by 13 % but may adversely impact on human health by increasing disability adjusted life years by 1.7 % if biomass availability is low to medium. Replacing fossil fuel with woody biomass has a positiveimpact on the environment, as one tonne of dry biomass feedstock when converted to biochar reduces up to 38 kg CO2e with biochar land application despite using more energy. These results will help understand a comprehensive picture of the new interventions in forestry businesses, which are promoting biochar-based bioenergy production.

Sustainable manufacturing,life cycle thinking and the circular economy

Achieving sustainable patterns of consumption and production is perhaps the biggest challenge facing our society today. The de-mand for more safe environmentally benign products is rising and many companies are looking for new ways to progressively improve the sus-tainability of their products. Moreover, there are numerous opportunities and countless innovations, technological as well as non-technologi-cal,that need to be exploited to improve the sustainability of products. Manufacturing industry is an important sector of any economy and hasthe potential to become a driving force for enabling sustainable patterns of production and consumption through introducing efficient productionpractices and developing products and services that help reduce environmental impacts. The benefits of adopting an integrated policy towardsproduct development based on life cycle thinking and eco-design to stimulate improvement of the environmental performance of each part ofproduct life cycle phases and achieve sustainable patterns of production and consumption are emphasized. The challenges in implementingsustainable manufacturing and the circular economy approaches are listed. A number of solutions are suggested to face up these challenges,for instance, increased awareness of enterprises particularly SME's of product life cycle issues and the opportunities that are available for costsavings and profit making from eco-innovation in product development for both the domestic and export markets and providing practical helpand advice directly to enterprises on integrated product development to promote enterprise led Eco-innovation. Aiming at contributing to sus-tainable manufacturing in China, Sino-UK Low Carbon Manufacturing Consortium, a multi-disciplinary research and educational partnershipbetween academia, industry and government agencies in the UK and China with interest in sustainable manufacturing issues, has been formedrecently.The vision, aims and benefits of membership of the consortium are also discussed.