Determination of Lead in Lime-preserved Egg by Microwave Digestion and Flame Atomic Absorption Spectroscopy

[Objectives] To establish a method for determining the lead content in lime-preserved eggs, to provide a theoretical basis for the quality control of production enterprises and the sampling and testing of supervision departments. [Methods] The lead content in lime-preserved eggs was measured by the microwave digestion and flame atomic absorption spectroscopy. [Results] The method had a correlation coefficient of r2=0.998 in the injection concentration range of 0-4 mg/L. The detection limit of the method was 0.008 2 mg/kg. In the range of 0.2 to 1.0 mg/kg addition concentration, the recovery rate of the method was 92.5%-108.0%, and the relative standard deviation(RSD) was <5%. [Conclusions] This method is accurate and reliable, simple and efficient, and is suitable for the detection of lead in lime-preserved eggs.

Determination of vanadium in food and traditional Chinese medicine by graphite furnace atomic absorption spectroscopy

Various experimental conditions were described for the vanadium determinationby graphite furnace atomic absorption spectroscopy (GFAAS). The experiments showed that whenatomization took place under the conditions where the combination of a pyrolytic coating graphitetube and fast raising temperature were used and the temperature was stable, the signal peak shapescould be improved, the sensitivity was enhanced, and the memory effect was removed. The vanadium infood and traditional Chinese medicinal herbs can be accurately determined using the standard curvemethod.

Mechanism of boron atomization in graphite furnace atomic absorption spectroscopy

The mechanism of the atomization of boron and the enhancement of sensitivity by matrix modifier Sr(NO_3)_2 in graphite furnace AAS were discussed.X-ray diffraction and thermodynamic calculation were applied to study the mechanism of boron atomization with and without matrix mo- difier Sr(NO_3)_2.The formation of boron atom is due to the sublimation of solid boron which derived from the reduction of B_2O_3 by carbon.The enhancement of boron signal in the presence of Sr(NO_3)_2 is due to the formation of SrB_6 before atomization,which decreased the volatization losses of B_2O_3 and retarded the formation of B_4C.

Dental Erosion by Beverages and Determination of Trace Elements in Teeth by Atomic Absorption Spectrometry

The analysis of trace elements in human tooth for use as biomarkers continues to generate considerable interest in environmental and bioanalytical studies, medical diagnostic and forensic science. This study investigated concentrations of essential and toxic elements (Zn, Cu, Pb, Ni, Co and Cd) using flame atomic absorption spectroscopy (FAAS) and (Na and K) flame atomic emission spectroscopy (FAES) in human tooth obtained from Misan province, Iraq. The influence of smoking habits and born children on the levels of trace elements in additional to dental erosion by some beverages in the tooth samples were investigated. The overall of mean concentrations of (Zn 185.2 ppm, Cu 36.11 ppm, Pb 18.63 ppm, Ni 13.44 ppm, Co 3.45 ppm, and Cd 0.58 ppm, Na 11.683 ppm and K 115.27 ppm), (Zn 178.243 ppm, Cu 35.877 ppm, Pb 15.64 ppm, Ni 12.89 ppm, Co 3.421 ppm, Cd 0.455 ppm, Na 11,558.04 ppm and K 114.04 ppm) in smokers and non-smokers tooth groups respectively, (Zn 81.12 ppm, Cu 24.37 ppm, Pb 11.18 ppm, Ni 13.68 ppm, Co 3.32 ppm, Cd 0.44 ppm, Na 8227 ppm and K 76.42 ppm), (Zn 80.58 ppm, Cu 24.30 ppm, Pb 10.86 ppm, Ni 12.74 ppm, Co 2.71 ppm, Cd 0.23 ppm, Na 8165 ppm and K 72.80 ppm) in mothers and wives tooth groups respectively. However the w/w% loss of tooth immersed in following order of beverages (green tea, black tea, cinnamon, hibiscus, vinegar and citrus aurantifolia (9.09, 9.68, 12.36, 15.01, 16.77 and 17.38), (8.19, 8.25, 9.76, 13.37, 14.02 and 15.33) in smokers and non-smokers groups respectively, (11.25, 11.47, 13.30, 15.75, 19.58, and 20.91), (8.31, 7.96, 11.39, 13.49, 17.40, and 17.67) in mothers and wives groups respectively. However, there is a statistically significant variance found Zn (tcal 5.029, ttab 2.131), Pb (tcal 4.8538, ttab 2.131), Ni (tcal 5.243, ttab 2.131), Cd (tcal 3.9062, ttab 2.131) and Na (tcal 3.0832, ttab 2.131) between smokers and non-smokers tooth groups. However, the Co (tcal 2.7403, ttab 2.131) also shows statistically significant variance between mothers and wives groups. There is no statistically significant variance in w/w% loss after immersed the tooth in some beverages but in general it was higher in smokers than non-smokers and in mothers higher than wives.

Application and Development Trends of Spectral Analysis in Draft of Non-Ferrous Metal Standards in China

Spectral analysis was a method of identifying substances, determining their chemical composition and calculating their content based on their spectral characteristics. This paper mainly discussed the application of various spectroscopic techniques, mainly including atomic absorption spectrometry (AAS) inductively coupled plasma emission spectrometry (ICP-AES) X-ray fluorescence spectroscopy (XRF) atomic fluorescence spectroscopy (AFS) direct reading spectroscopy (OES) glow discharge emission spectroscopy (GD-OSE) laser-induced breakdown spectroscopy (LIBS), in the formulation of non-ferrous metal standards in China. The AAS method was the most widely used single-element microanalysis method among the non-ferrous metal standards. The ICP-AES method was good at significant advantages in the simultaneous detection of multiple elements. The XRF method was increasingly used in the determination of primary and secondary trace elements due to its simple sample preparation and high efficiency. The AFS was mostly detected by single-element trace analysis. OES GD-OES and LIBS were playing an increasingly important role in the new demand area for non-ferrous metals. This paper discussed matrix elimination, sample digestion, sample preparation, instrument categories and other aspects of some standards, and summarized the advantages of spectral analysis and traditional chemical analysis methods. The new methods of future spectroscopic technology had been illustrated in the process of developing non-ferrous metal standards.

Prevalence of Bacillus sp.among the biofilm forming community on Ti surface in marine environment

Prevalence of bacterial species involved in biomineralization of manganese on titanium （Ti） surfaces in marine environment was revealed in this research work. This study involves one year sea water exposure of Ti and their periodical biofilm characterization was carried out to quantify the manganese oxidizing bacterial （MOB） presence in the biofilm formed on titanium surfaces. The total viable count study of Ti coupons exposed to sea water for one year resulted in 60% of the MOB in overall biofilm population. The biochemical characterization of MOB isolates were performed for the genus level identifcation of the seven bacterial isolates. Further, the seven strains were subjected to 16S rRNA gene sequencing. Evolutionary analysis was performed using MEGA 7 to obtain closely related strains within the groups. The manganese oxidizing ability of the bacterial isolates were determined with Leucoberbelin Blue Assay （LBB） and Atomic Absorption Spectroscopy studies （hAS）. The results show that among the isolated marine MOB species, Bacillus sp. and Leptothrix sp. have the maximum Mn oxidizing property. The microtitre plate assay was performed to determine the biofilm forming ability of the isolated marine MOB species. All the results have confirmed the prevalence of Bacillus sp. among the biofilm colonizers on Ti surfaces when exposed in sea water.

Application of Nanometer-Size Titanium Dioxide in Extreme-Trace V(Ⅴ) Analysis

The adsorption properties of nanometer-size TiO2 for V（Ⅴ ） were studied. The adsorption rate could reach above 99~ when the pH values were at the range of 4 10. The adsorption balance time was 10 min , the saturation capacity of adsorption of nanometer-size TiO2 to V（Ⅴ） was 6.43 mg per gram. Using 2 mL 1.5 mol · L^-1 NaOH as elution, we found the elution rate could reach 95%. A novel method of extreme-trace V（Ⅴ ） preconeentration with nanometer-size titanium dioxide and determination by graphite furnace atomic absorption spectroscopy （GFAAS） was advanced. The detection limit（3σ）of the method was 0.61μg ·L^-1 , and the relative standard deviation was 8.1% （n=6） of 2.5μg ·L-^1 V（Ⅴ）. Environmental samples experiments were also conducted to test the feasibility of the method, and it came out that the recovery rates were between 91.2% and 102.0%.

Levels of Selected Essential and Non-Essential Metals in the Soil and Ginger (<i>Zingiber officinale</i>) Cultivated in Wolaita Zone, Ethiopia

Ginger (Zingiber officinale) is an important spice and medicinal plant used in different parts of the world. The objective of current study was to determine the level of essential and non-essential metals in ginger and its correlation with concentration of metals in the supporting soil. The level of K, Na, Ca, Mg, Mn, Fe, Zn, Cu, Co, Cd and Pb in soil and ginger cultivated in the selected districts of Wolaita zone, Southern Ethiopia were determined using flame atomic absorption spectrometry. A 0.5 g ginger sample was digested using a mixture of 4 ml HNO3 and 1.5 ml HClO4 at 210°C for 150 minutes, and a 0.5 g soil sample was digested employing a mixture of 6 ml aqua-regia and 1 ml H2O2 at 280°C for 150 minutes. The metal concentrations range in dry weight basis for ginger samples is decreasing in the order: K (1691 - 3487 mg/kg) > Mg (701 - 1583 mg/kg) > Ca (862 - 1476 mg/kg) > Na (398 - 776 mg/kg) > Mn (325 - 672 mg/kg) > Fe (6.14 - 11.92 mg/kg) > Zn (5.30 - 10.09 mg/kg) > (0.12 - 0.23 mg/kg) for Pb. The concentration of Cd, Cu and Co in ginger samples were below the limit of detection. The results revealed that ginger has the ability to accumulate relatively higher amounts of K and Mg among the determined essential metals. The soil samples have been found to be acidic pH, sandy clay loam in texture, a very low electrical conductivity and moderate level of (CEC, organic carbon, available phosphorus and total nitrogen). Although, a positive correlation between the levels of K, Mg, Zn, Mn in ginger and soil samples were observed. All the non-essential metals analyzed in this study were below the permissible ranges set by FAO/WHO.

One Pot Synthesis and Characterization of Cesium Doped SnO_2 Nanocrystals via a Hydrothermal Process

The physico-chemical properties of cesium doped SnO2 nanocrystals synthesized by wet chemical method have been investigated. Scanning electron microscopy （SEM）, X-ray diffraction （XRD）, energy dispersive X-ray analysis （EDAX）, inductively coupled plasma （ICP）, atomic absorption spectroscopic （AAS） analyses, UV-vis-NIR spectral studies and dielectric studies were carried out for both pure SnO2 and cesium doped SnO2 nano-samples. All samples of SnO2 did not show any metallic cluster, but the sample containing cesium as a dopant displayed significant activity. The products formed were chloride and water representing a competitive advantage from the stand point of environmental protection.