Evaluating the biosignature potential of ammonium in Proterozoic red beds and implications for the search for life on Mars

Over the past two decades,it has become increasingly apparent that early Mars may once have been warmer,wetter and more habitable for microbial life than it is today,which has spurred discussions about potential biosignatures that may be preserved in Martian sediments.An impediment to this line of research is the pervasive oxidation of Mars’surface due to photochemical oxidants that have likely destroyed remnants of organic matter.Here,we investigate whether nitrogen(N)transferred from biomass to phyllosilicate minerals during diagenesis can be preserved in oxidized mudrocks.We investigate two sequences of terrestrial Proterozoic red beds,namely the Sibley Group(1.4 Ga)in Canada and the Stoer Group(1.2 Ga)in Scotland,and we find enrichments in authigenic N in the range of several tens of ppm in both units.The highest concentrations(ca.100 ppm on average)are found in the most desiccated red beds of the Stoer Group,concurrent with enrichments in potassium(K).We discuss similarities and differences between the two sets of rocks with regards to salinity,pH,biological productivity and K-metasomatism,and we conclude that the ideal mechanism for the preservation of biogenic N in red beds may be in-situ release of ammonium from microbial mats into the clay substrate,possibly facilitated by early diagenetic,biologically induced illitization.Illite and smectite have been observed on Mars,and experiments suggest that Martian waters contained moderate amounts of dissolved K.Hence,it is conceivable that a similar K and N enrichment process could have occurred as to what we document for the Proterozoic,preserving evidence of life that may have survived to the modern day.

Influence of the Nature of the Incoming Sludge on the Performance of a Vertical Flow Reed Beds in Dakar-Senegal

This work investigates the influence of the type sludge on drainage, plant development, purification performances and biosolids quality. Drainage properties were measured through the frequency of clogging, the percentage of leachate recovered and the dryness of accumulated sludge. Plant development was measured through the density, the height and the stem diameter. Purification performance was evaluated from the reduction rate. Biosolids quality was measured after 3 months of maturation. The results show that the clogging frequencies were 9.5%;0% and 3.7%;the volume of leachate recovered was 42.2%;20.4% and 24.7% and, the dryness was 33.4%;61.1% and 52.4% for FS-ST, FS-STT and SS respectively. Plants densities were about, with densities 197.1, 171.3 and 178.3 plants/m2 in beds fed respectively with FS-ST, FS-STT and SS. Despite the high removal rates, the concentrations of pollutants in the leachates are above the Senegalese standard NS 05-061 for discharge into the environment. The biosolids are all mature with C/N and NH4+/NO3?ratios lower than 12 and 1 respectively. The biosolids are also rich in organic and mineral elements. The concentrations of Ascaris eggs are higher than the WHO recommendations. These biosolids should be stored for additional time or composted.

Numerical Study of Flow Features Around Submerged Circular and Square Piles at Flat and Scoured Beds Using OpenFOAM

Elucidating the flow features around piles in local scouring processes is crucial for studies of local scouring mechanisms and scour depth estimates.This study details the flow turbulence characteristics of two submerged piles that are determined by solving the Navier-Stokes equations with the improved delayed detached eddy simulation model.This model is verified by comparing experimental and numerical results for hydrodynamic parameters with the literature for both square-crossing piles(SCPs)and circular-crossing piles(CCPs).Original topographies of flat and scoured beds(i.e.,the initial and equilibrium scouring stages)are based on experimental results obtained by the authors in the present paper.SCP and CCP flow features in the scouring process are discussed.The results indicate that during the scouring process,the time-averaged drag coefficient and root mean square(rms)of the lift coefficient increase linearly in the CCP test,while the rms of the lift coefficient in the SCP test decreases linearly.Moreover,the minimum pressure coefficient is always located in the upstream corners in the SCP case but moves from 72.5°to 79.5°when the scour hole is completely developed in the CCP case.Downward flow behind the pile,which is generated by separated boundary layers above the top face of the pile,can reach the sand bed and turn the separated shear layers into patches of small vortices in the near-wake regions.Thus,the high shear stress zones are mainly at the scour edges under scoured-bed conditions.

Hydrodynamic analysis of carbon nanotube clusters in distributor-less conical fluidized beds with step-by-step scaling

As a high-performance material with great application potential,the application of carbon nanotubes has been limited by their production volume.A distributor-less conical fluidized bed is the main equipment used in the industrial production of carbon nanotubes.To improve the production volume and product quality of carbon nanotubes,the study of fluidized-bed-diameter scaling is important.Three different diameters of distributor-less conical fluidized beds were established,and then the particle behavior and bubble characteristics of carbon nanotube clusters at these bed diameters were investigated.Time-series and wavelet analysis methods were used to analyze the pressure-fluctuation signals inside the fluidized beds.Results showed that the distributor-less design caused the airflow to break through the middle of the bed,which did not change with the change in bed diameter.The powder-bridging phenomenon of carbon nanotube clusters in a 100-mm-diameter fluidized bed was related to the special microstructure of carbon nanotube clusters.The frequency of pressure fluctuations in the bed decreased nonlinearly with increasing bed diameter.This study can guide the design and scale-up of distributor-less conical fluidized beds,especially for the scale-up of carbon nanotube production equipment,which can contribute to the improvement of carbon nanotubes’capacity and quality in industrial production.

瞬变电磁BEDS-FDTD三维正演新算法及稳定性验证

常规FDTD的时间步长需满足Courant-Friedrich-Lewy(CFL)稳定性条件,导致时间迭代步过多,正演非常耗时.针对上述问题,本文采用Backward Euler(BE)差分方法近似Maxwell方程组中场对时间的一阶导数,使时间步长突破CFL限制;引入Direct Splitting(DS)策略将电磁场分量解耦,并将大型稀疏矩阵降阶和重构为一系列低阶且主对角占优的三对角矩阵,加快方程求解效率;而且,为了减少模型尺寸,针对上述改进的全新方程,本文采用双线性变换方法(bilinear transform, BT)推导了复频率偏移完全匹配层(complex frequency shifted perfectly matched layer, CFS-PML)吸收边界,形成瞬变电磁三维正演全新算法:BEDS-FDTD.首先采用von Neumann方法测试了新算法在有耗介质中、非均匀时间步长下的稳定性.之后,将BEDS-FDTD算法用于模型实验,并将模拟结果与层状模型的半解析解进行了对比,实验结果证明了新算法的计算精度能够满足需要;同时对新算法的计算效率进行了分析,当采用Tesla A100 GPU计算时,50×50×50网格数目的模型仅用10 s,即使网格数目增加到200×200×200,也仅需224 s.最后,将BEDS-FDTD算法用于复杂三维模型计算.

Impact of Numerous Beds Operating Conditions for Enhancing the Performance of a Solar Heat-Supported Adsorption Chiller

Thermal adsorption cooling systems have gained significant attention due to their potential for energy savings and eco-environmental impact. An analytic investigation of the heat transfer inside an adsorption chiller with various bed silica gel-water pairs is presented. A comprehensive model has been designed to accurately predict the correlation between the overall performance of the proposed chiller system and the functional and structural condition of the building. This model takes into account various factors such as temperature, humidity, and air quality to provide a detailed analysis of the system’s efficiency. At least 20 collectors consisting of a 34.4 m area (each) with a full-cycle time of 480 seconds are essential to improper run conditions. It is necessary to adjust the optimum cycle time for optimal performance. During the investigation, the base condition shows that the cooling capacity is 14 kw, 0.6 COPcycle, and 0.35 COPsolar at noon. Also, conduct a thorough investigation into the chiller’s performance under varying cooling water supply temperatures and various chilled water flow rates.

Theory and practice of unconventional gas exploration in carrier beds: Insight from the breakthrough of new type of shale gas and tight gas in Sichuan Basin, SW China

Unconventional gas in the Sichuan Basin mainly includes shale gas and tight gas.The development of shale gas is mainly concentrated in the Ordovician Wufeng Formation-Silurian Longmaxi Formation,but has not made any significant breakthrough in the Cambrian Qiongzhusi Formation marine shale regardless of exploration efforts for years.The commercial development of tight sandstone gas is mainly concentrated in the Jurassic Shaximiao Formation,but has not been realized in the widespread and thick Triassic Xujiahe Formation.Depending on the geological characteristics of the Qiongzhusi Formation and Xujiahe Formation,the feedback of old wells was analyzed.Then,combining with the accumulation mechanisms of con-ventional gas and shale gas,as well as the oil/gas shows during drilling,changes in production and pressure during develop-ment,and other characteristics,it was proposed to change the exploration and development strategy from source and reservoir exploration to carrier beds exploration.With the combination of effective source rock,effective carrier beds and effective sand-stone or shale as the exploration target,a model of unconventional gas accumulation and enrichment in carrier beds was built.Under the guidance of this study,two significant results have been achieved in practice.First,great breakthrough was made in exploration of the silty shale with low organic matter abundance in the Qiongzhusi Formation,which breaks the traditional approach to prospect shale gas only in organic-rich black shales and realizes a breakthrough in new areas,new layers and new types of shale gas and a transformation of exploration and development of shale gas from single-layer system,Longmaxi For-mation,to multi-layer system in the Sichuan Basin.Second,exploration breakthrough and high-efficient development were re-alized for difficult-to-produce tight sandstone gas reserves in the Xujiahe Formation,which helps address the challenges of low production and unstable production of fracture zones in the Xujiahe Formation,promote the transformation of tight sandstone gas from reserves without production to effective production,and enhance the exploration and development potential of tight sandstonegas.

Progress in research of process intensification of spouted beds:A comprehensive review

The development of intensification technology for spouted beds has become a current research focus,and an effective way to improve the efficiency of spouted beds is to reform their structure.Although numerous studies have been conducted on conventional beds,there are few reviews on the comprehensive application of intensification technology for spouted beds.In this paper,we comprehensively review the role of intensification technology in spouted beds for use in hydrodynamics,drying,desulfurization,pyrolysis,coating,biomass and waste gasification,and biomass drying from the perspective of experiment and simulation.Finally,potential problems and challenges in current spouted-bed research are summarized.

Adsorption dynamics of ethane from air in structured fixed beds with different microfibrous composites

Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrapped activated carbon(MEAC)composites were prepared by wet layup papermaking/sintering technique and in-situ hydrothermal method.Microfibrous composites were characterized by X-ray diffraction,scanning electron microscopy and N2 adsorption/desorption.Structured fixed beds were designed by filling granular adsorbents(5A zeolite or activated carbon)and microfibrous composites at the inlet and outlet of the beds,respectively.Effects of flow rate,bed height and structure on the breakthrough curves were investigated.The length of unused bed(LUB)was determined,and Yoon–Nelson model was used to fit the breakthrough curves.The experimental results showed ethane was effectively adsorbed on the granular adsorbents and microfibrous composites.Both composites could decrease the LUB values and enhance bed utilization.All breakthrough curves fitted well to Yoon–Nelson model,with correlation coefficient exceeding 0.89.The adsorption rate of ethane could be improved in the structured fixed beds,which showed an enhanced mass transfer efficiency for ethane adsorption.LUB values of structured fixed beds with 5A/PSSF composites were larger,the bed utilization values were lower,and the adsorption rate constants were higher than those with MEAC composites under the same conditions.

SEIHCRD Model for COVID-19 Spread Scenarios,Disease Predictions and Estimates the Basic Reproduction Number,Case Fatality Rate,Hospital,and ICU Beds Requirement

We have proposed a new mathematical method,the SEIHCRD model,which has an excellent potential to predict the incidence of COVID-19 diseases.Our proposed SEIHCRD model is an extension of the SEIR model.Three-compartments have added death,hospitalized,and critical,which improves the basic understanding of disease spread and results.We have studiedCOVID-19 cases of six countries,where the impact of this disease in the highest are Brazil,India,Italy,Spain,the United Kingdom,and the United States.After estimating model parameters based on available clinical data,the modelwill propagate and forecast dynamic evolution.Themodel calculates the Basic reproduction number over time using logistic regression and the Case fatality rate based on the selected countries’age-category scenario.Themodel calculates two types of Case fatality rate one is CFR daily,and the other is total CFR.The proposed model estimates the approximate time when the disease is at its peak and the approximate time when death cases rarely occur and calculate how much hospital beds and ICU beds will be needed in the peak days of infection.The SEIHCRD model outperforms the classic ARXmodel and the ARIMA model.RMSE,MAPE,andRsquaredmatrices are used to evaluate results and are graphically represented using Taylor and Target diagrams.The result shows RMSE has improved by 56%–74%,and MAPE has a 53%–89%improvement in prediction accuracy.

3D characterization and analysis of pore structure of packed ore particle beds based on computed tomography images

Methods and procedures of three-dimensional （3D） characterization of the pore structure features in the packed ore particle bed are focused. X-ray computed tomography was applied to deriving the cross-sectional images of specimens with single particle size of 1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10 ram. Based on the in-house developed 3D image analysis programs using Matlab, the volume porosity, pore size distribution and degree of connectivity were calculated and analyzed in detail. The results indicate that the volume porosity, the mean diameter of pores and the effective pore size （d50） increase with the increasing of particle size. Lognormal distribution or Gauss distribution is mostly suitable to model the pore size distribution. The degree of connectivity investigated on the basis of cluster-labeling algorithm also increases with increasing the particle size approximately.

Radiometric Dating of Ignimbrite from Inner Mongolia Provides no Indication of a Post-Middle Jurassic Age for the Daohugou Beds

Lacustrine deposits exposed at Daohugou, Inner Mongolia, China, have yielded superbly preserved vertebrate fossils. The fossil beds were first misinterpreted as of Early Cretaceous age, based on alleged occurrences of key fossils of the Jehol Biota. Compelling evidence revealed by more rigorous research involving regional biostratigraphy, radiometric dating, and paleontology supports the Middle Jurassic age of the fossil beds. Despite the awesome evidence for the Middle Jurassic age of the Daohugou beds, the age dispute has been resurrected recently by invoking an overturned stratigraphic sequence. A careful review of the data, however, found no evidence that this sequence has been overturned. In addition, many of the assumptions, on which the conjecture of the fossil beds being post- Middle Jurassic is imprudently based, are self-contradictory or otherwise misleading. Thus, the post- Middle Jurassic age of the Daohugou beds as an unfounded conclusion can readily be dismissed.

Planktic Foraminiferal Biostratigraphy of the Cretaceous Oceanic Red Beds in Kangmar,Southern Tibet,China

The planktic foraminifera of the Chuangde Formation （Upper Cretaceous Oceanic Red Beds, CORBs） as exposed at Tianbadong section, Kangmar, southern Tibet has been firstly studied for a detailed for a detailed biostratigraphy elaboration. A rich and well-preserved planktic foraminifera were recovered from the Chuangde Formation of the Tianbadong section and the Globotruncanita elevata, Globotruncana ventricosa, Radotruncana calcarata, Globotruncanella havanensis, Globotruncana aegyptiaca, Gansserina gansseri and Abathomphalus mayaroensis zones have been recognized. The planktic foraminiferal assemblage points to an early Campanian to Maastrichitian age for the CORBs of the eastern North Tethyan Himalayan sub-belt, which also provides a better understanding of the shifting progress of the Indian Plate to the north and the evolution of the Neotethyan ocean. The lithostratigraphy of the Chuangde Formation of the Tianbadong section comprises two lithological sequences observed in ascending succession： a lower unit （the Shale Member） mainly composed of purple （cherry-red, violet-red） shales with interbedded siltstones and siliceous rocks; and an upper unit （the Limestone Member） of variegated limestones. The strata of the Chuangde Formation in the Tianbadong section are similar to CORBs in other parts of the northern Tethyan Himalaya area of Asia （Gyangze, Sa＇gya, Sangdanlin, northern Zanskar, etc.）. The fossil contents of the Chuangde Formation in the sections （CORBs） studied provide a means of correlation with the zonation schemes for those of the northern Tethyan Himalayan sub-belt and the Upper Cretaceous of the southern Tethyan Himalayan sub-belt. Paleogeographic reconstruction for the Late Cretaceous indicates that the Upper Cretaceous Chuangde Formation （CORBs） and correlatable strata in northern Zanskar were representative of slope to basinal deposits, which were situated in the northern Tethyan Belt. Correlatable Cretaceous strata in Spiti and Gamba situated in the southern Tethyan Belt in contrast were deposited in shelf environments along the Tethyan Himalayan passive margin. CORBs are most likely formed by the oxidation of Fe（II）-enriched, anoxic deep ocean water near the chemocline that separated the oxic oceanic surface from the anoxic.

Precious Fossil-Bearing Beds of the Lower Cretaceous Jiufotang Formation in Western Liaoning Province, China

Based on the subdivision into three members of the Lower Cretaceous Jiufotang Formation in western Liaoning, this paper deals mainly with the division and correlation of precious fossil birdand reptile-bearing beds of the formation in the Dachengzi, Chaoyang, Dapingfang.Meileyingzi and Fuxin-Yixian basins. Among them, the precious fossil-bearing beds in the Dachengzi Basin may be recognized as the Xidagou Bed of the second member and the Yangcaogoudonggou Bed of the third member; those in the Chaoyang Basin may be confirmed as the Shangheshou Bed of the second member and the Dongpochi Bed of the third member; those in the Dapingfang-Meileyingzi Basin are as the Lamagou Bed of the second member, the Huanghuagou Bed of the lower third member and the Yuanjiawa Bed of the upper third member; and those in the Fuxin-Yixian Basin are listed as the Tuanshanzi Bed of the second member and the Pijiagou Bed of the third member. Since these basins are distinctly separated and the bird and reptile fossils are mostly new genera and species, we have to use the associated fossil ostracod assemblages as index to correlate the Xidagou Bed with the Shangheshou Bed and the Lamagou Bed, and to correlate the Yuanjiawa Bed with the Yangcaogoudonggou Bed and the Pijiagou Bed. Primarily, we established the sequence of the precious fossil-bearing beds of the Jiufotang Formation in western Liaoning. They are represented by, in ascending order, the Xidagou Bed of the second member, the Huanghuagou Bed of the lower third member, and the Yuanjiawa Bed of the upper third member. Obviously, this work has significance for the study on the time-space distribution and radiation of birds and dinosaurs during the period of the middle Early Cretaceous.

Burial Records of Reactive Iron in Cretaceous Black Shales and Oceanic Red Beds from Southern Tibet

One of the new directions in the field of Cretaceous research is to elucidate the mechanism of the sedimentary transition from the Cretaceous black shales to oceanic red beds. A chemical sequential extraction method was applied to these two types of rocks from southern Tibet to investigate the burial records of reactive iron. Results indicate that carbonate-associated iron and pyrite are relatively enriched in the black shales, but depleted or absent in red beds. The main feature of the reactive iron in the red beds is relative enrichment of iron oxides （largely hematite）, which occurred during syn-depostion or early diagenesis. The ratio between iron oxides and the total iron indicates an oxygen-enriched environment for red bed deposition. A comparison between the reactive iron burial records and proxies of paleo-productivity suggests that paleo-productivity decreases when the ratio between iron oxides and the total iron increases in the red beds. This phenomenon could imply that the relationship between marine redox and productivity might be one of the reasons for the sedimentary transition from Cretaceous black shale to oceanic red bed deposition.

LA-ICPMS Zircon U-Pb Dating in the Jurassic Daohugou Beds and Correlative Strata in Ningcheng of Inner Mongolia

LA-ICPMS Zircon U-Pb dating is applied to volcanic rocks overlying and underlying the Salamander-bearing bed in the Daohugou beds of Ningcheng in Inner Mongola and Reshuichang of Lingyuan and Mazhangzi of Jianping in western Liaoning. The results indicate that the youngest age of the rocks in Daohugou of Ningcheng is 158 Ma, and the oldest one is 164 Ma. Synthesized researches indicate that the salamander-bearing beds in Daohugou of Ningcheng, Reshuichang of Lingyuan and Mazhangzi of Jianping were developed in the same period. The Daohugou beds were formed in the geological age of 164-158 Ma of the middle-late Jurassic. Whilst, the Daohugou beds and its corrdative strata should correspond to the Tiaojishan Formation （or Lanqi Formation） of the middle Jurassic in northern Hebei Province and western Liaoning Province, based on the disconformity between the Daohugou beds and its overlaying beds of the Tuchengzi Formation of Late Jurassic and the Jehol Beds of early Cretaceous, and the disconformity between the Daohugou Beds and its underlying Jiulongshan Formation, which is composed of conglomerate, sandstone, shale with coal and thin coal beds.

Logging Evaluation of the Ordovician Carbonate Reservoir Beds in the Lungudong Region,Tarim Basin

In recent years, great progress has been made constantly in oil and gas exploration in the Lungudong region of the Tarim Basin. However, progress has been slow in the evaluation of its main oil-producing horizons -- the Ordovician carbonate reservoir beds. Based on previous researches and on the various data such as drilling, geology and oil test, in combination with the interpretation of each single-well imaging and conventional logging data, and through analysis and comparison, the identification methods in imaging and conventional logging for four types of carbonate reservoir beds in this region are summarized in this paper. Calculation formulas for four reservoir bed parameters, i. e. shale content, porosity, permeability and oil saturation in this region are proposed; and reservoir beds in this region are divided into three levels （Ⅰ, Ⅱ and Ⅲ） by combining oil test data and logging data, The lower limits of the effective porosity of reservoir beds and the fracture porosity of effective reservoir beds are determined as 1.8% and 0.04%, respectively. The physical property parameters are calculated by conventional logging curves, and the most advantageous areas for reservoir development are predicted comprehensively. On the plane, the high-value zones of reservoir bed parameters are mainly concentrated in the N-S-trending strike-slip fault, the Sangtamu fault horst zone and near the LG38 well area; vertically, the reservoir bed parameters of the Yijianfang Formation are better than those of the Yingshan and Lianglitage formations.

Seed Zone Properties and Crop Performance as Affected by Three No-Till Seeders for Permanent Raised Beds in Arid Northwest China

The no-till seeders of various soil opener configurations have been shown to produce various soil physical responses in relation to soil and climate conditions, thus affecting crop performance in permanent raised beds （PRB） systems. This is particularly important in arid Northwest China where large volumes of residue are retained on the soil surface after harvest. In Zhangye, Gansu Province, China, a field trial assessed the effects of three typical （powered-chopper, powered-cutter and powered-disc） PRB no-till seeders and one traditional seeder on soil disturbance, residue cover index, bulk density, fuel consumption, plant growth, and subsequent yield. In general, seedbed conditions and crop performance for PRB no- till seeders seeded plots were better than for traditional seeded plots. In PRB cropping system, the powered-chopper seeder decreased mean soil disturbance and increased residue cover index compared to powered-disc and -cutter seeders. However, the results indicated that soil bulk density was 2.3-4.8% higher, soil temperature was 0.2-0.6℃ lower, and spring wheat emergence was 3.2-4.7% less. This was attributed to greater levels of residue cover and firmer seedbeds. Spring maize and wheat performance in the powered-cutter and -disc treatments was better （non-significant） than powered- chopper treatment. So powered disc no-till seeder, which generally provided the best planting condition and the highest yield, appeared to be the suitable seeder in heavy residue cover conditions. Considering the precision requirements for soil disturbance and residue cover, the powered strip-chopping no-till seeder could be a suitable option for PRB cropping system in Northwest China. Although these results are preliminary, they are still valuable for the design and selection of no-till seeders for PRB cropping systems in arid Northwest China.

Land degradation and management of red beds in China:Two case studies

Red beds cover approximately 9.5%of China,and are home to approximately 144 million people.In total,83%of these lands are distributed in humid regions making it an important part of research on red bed soil erosion in China in these areas.This paper presents the main types of land degradation in red bed landscapes and the status of current soil erosion in a typical red bed basin,the Nanxiong Basin located in the north of Guangdong Province,China,and establishes the connection between management strategies and regional economic development in humid red bed regions of China.The soil erosive modulus was calculated in the Nanxiong Basin by using RUSLE(The Revised Universal Soil Loss Equation).The results of overlapping analyses demonstrated that appropriate measures,such as the Return Farmland to Forests initiative,should be taken at the junction of central red bed areas and mountainous areas in order to mitigate current soil erosion.Two examples are presented to demonstrate this:the tourism development in Mt.Danxiashan,a noted scenic mountainous area near Nanxiong Basin,and the land degradation mitigation in the Nanxiong Basin.Both examples promote local economic growth while simultaneously protecting the environment.A‘stakeholder'strategy is pursued at Mt.Danxiashan,which can help residents to understand their positive effects on the environment as well as increase their income.The second example,in Nanxiong City,showcases how local farmers became stakeholders by implementing contract responsibility and self-support systems for economic forests and terraced land in the 1980s.

Response of Reactive Phosphorus Burial to the Sedimentary Transition from Cretaceous Black Shales to Oceanic Red Beds in Southern Tibet

The mechanism of sedimentary transition from the Cretaceous black shales to the oceanic red beds is a new and important direction of Cretaceous research. Chemical sequential extraction is applied to study the burial records of reactive phosphorus in the black shale of the Gyabula Formation and oceanic red beds of the Chuangde Formation, Southern Tibet. Results indicate that the principal reactive phosphorus species is the authigenic and carbonate-associated phosphorus （CAP） in the Gyabula Formation and iron oxides-associated phosphorus （FeP） in the Chuangde Formation which accounts for more than half of their own total phosphorus content. While the authigenic and carbonate-associated phosphorus （CAP） is almost equal in the two Formations; the iron oxidesassociated phosphorus is about 1.6 times higher in the Chuangde Formation than that in the Gyabula Formation resulting in a higher content of the total phosphorus in the Chuangde Formation. According to the observations on the marine phosphorus cyde in Modern Ocean, it is found that preferential burial and regeneration of reactive phosphorus corresponds to highly oxic and reducing conditions, respectively, leading to the different distribution of phosphorus in these two distinct type of marine sediments. It is the redox-sensitive behavior of phosphorus cycle to the different redox conditions in the ocean and the controlling effects of phosphorus to the marine production that stimulate the local sedimentary transition from the Cretaceous black shale to the oceanic red beds.