Deep tectonics and seismogenic mechanisms of the seismic source zone of the Jishishan M_(s)6.2 earthquake on December 18,2023,at the northeast margin of the Tibetan Plateau

On December 18,2023,an M_(s)6.2 earthquake occurred in Jishishan,Gansu Province,China.This earthquake happened in the eastern region of the Qilian Orogenic Belt,which is situated at the forefront of the NE margin of the Tibetan Plateau(i.e.,Qinghai-Tibet Plateau),encompassing a rhombic-shaped area that intersects the Qilian-Qaidam Basin,Alxa Block,Ordos Block,and South China Block.In this study,we analyzed the deep tectonic pattern of the Jishishan earthquake by incorporating data on the crustal thickness,velocity structure,global navigation satellite system(GNSS)strain field,and anisotropy.We discovered that the location of the earthquake was related to changes in the crustal structure.The results showed that the Jishishan M_(s)6.2 earthquake occurred in a unique position,with rapid changes in the crustal thickness,Vp/Vs,phase velocity,and S-wave velocity.The epicenter of the earthquake was situated at the transition zone between high and low velocities and was in proximity to a low-velocity region.Additionally,the source area is flanked by two high-velocity anomalies from the east and west.The principal compressive strain orientation near the Lajishan Fault is primarily in the NNE and NE directions,which align with the principal compressive stress direction in this region.In some areas of the Lajishan Fault,the principal compressive strain orientations show the NNW direction,consistent with the direction of the upper crustal fast-wave polarization from local earthquakes and the phase velocity azimuthal anisotropy.These features underscore the relationship between the occurrence of the Jishishan M_(s)6.2 earthquake and the deep inhomogeneous structure and deep tectonic characteristics.The NE margin of the Tibetan Plateau was thickened by crustal extension in the process of northeastward expansion,and the middle and lower crustal materials underwent structural deformation and may have been filled with salt-containing fluids during the extension process.The presence of this weak layer makes it easier for strong earthquakes to occur through the release of overlying rigid crustal stresses.However,it is unlikely that an earthquake of comparable or larger magnitude would occur in the short term(e.g.,in one year)at the Jishishan east margin fault.

Review on dietary supplements as an effective improvement of Alzheimer's disease:focus on structures and mechanisms

Alzheimer’s disease(AD),the major form of neurodegenerative diseases that can severely impede normal cognitive function,makes it one of the most common fatal diseases.There are currently over 50 million AD patients worldwide.The neuropathology of AD is perplexing and there is a scarcity of disease-modifying treatments.Currently,early diagnosis of AD has been made possible with the discovery of biological markers associated with pathology,providing strong support for the improvement of the disease status.The search for inhibitors of AD markers from dietary supplements(DSs)has become a major hot topic.Especially with the widespread use of DSs,DSs containing polyphenols,alkaloids,terpenes,polysaccharides and other bioactive components can prevent AD by reducing Aβdeposition,inhibiting tau protein hyperphosphorylation,reconstructing synaptic dysfunction,weakening cholinesterase activity,regulating mitochondrial oxidative stress,neuronal inflammation and apoptosis.This review summarizes the anti-AD effects of the main DSs and their bioactive constituents,as well as the potential molecular mechanisms covers from 2017 to 2023.Additionally,we discussed the opportunities and challenges faced by DSs in the process of AD prevention and treatment,aiming to further provide new perspectives for functional food development.

Decoding molecular mechanisms:brain aging and Alzheimer's disease

The complex morphological,anatomical,physiological,and chemical mechanisms within the aging brain have been the hot topic of research for centuries.The aging process alters the brain structure that affects functions and cognitions,but the worsening of such processes contributes to the pathogenesis of neurodegenerative disorders,such as Alzheimer's disease.Beyond these observable,mild morphological shifts,significant functional modifications in neurotransmission and neuronal activity critically influence the aging brain.Understanding these changes is important for maintaining cognitive health,especially given the increasing prevalence of age-related conditions that affect cognition.This review aims to explore the age-induced changes in brain plasticity and molecular processes,differentiating normal aging from the pathogenesis of Alzheimer's disease,thereby providing insights into predicting the risk of dementia,particularly Alzheimer's disease.

Microscopic growth mechanism and edge states of monolayer 1T'-MoTe_(2)

Transition metal ditellurides(TMTDs)have versatile physical properties,including non-trivial topology,Weyl semimetal states and unique spin texture.Controlled growth of high-quality and large-scale monolayer TMTDs with preferred crystal phases is crucial for their applications.Here,we demonstrate the epitaxial growth of 1T'-MoTe_(2) on Au(111)and graphitized silicon carbide(Gr/SiC)by molecular beam epitaxy(MBE).We investigate the morphology of the grown1T'-MoTe_(2) at the atomic level by scanning tunnelling microscopy(STM)and reveal the corresponding microscopic growth mechanism.It is found that the unique ordered Te structures preferentially deposited on Au(111)regulate the growth of monolayer single crystal 1T'-MoTe_(2),while the Mo clusters were preferentially deposited on the Gr/SiC substrate,which impedes the ordered growth of monolayer MoTe_(2).We confirm that the size of single crystal 1T'-MoTe_(2) grown on Au(111)is nearly two orders of magnitude larger than that on Gr/SiC.By scanning tunnelling spectroscopy(STS),we observe that the STS spectrum of the monolayer 1T'-MoTe_(2) nano-island at the edge is different from that at the interior,which exhibits enhanced conductivity.

Netrin-1 signaling pathway mechanisms in neurodegenerative diseases

Netrin-1 and its receptors play crucial roles in inducing axonal growth and neuronal migration during neuronal development.Their profound impacts then extend into adulthood to encompass the maintenance of neuronal survival and synaptic function.Increasing amounts of evidence highlight several key points:(1)Diminished Netrin-1 levels exacerbate pathological progression in animal models of Alzheimer’s disease and Parkinson’s disease,and potentially,similar alterations occur in humans.(2)Genetic mutations of Netrin-1 receptors increase an individuals’susceptibility to neurodegenerative disorders.(3)Therapeutic approaches targeting Netrin-1 and its receptors offer the benefits of enhancing memory and motor function.(4)Netrin-1 and its receptors show genetic and epigenetic alterations in a variety of cancers.These findings provide compelling evidence that Netrin-1 and its receptors are crucial targets in neurodegenerative diseases.Through a comprehensive review of Netrin-1 signaling pathways,our objective is to uncover potential therapeutic avenues for neurodegenerative disorders.

A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas

Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.

Mechanical and thermoelectric properties in Te-rich Ag_(2)(Te,S)metaphases

Ductile Ag_(2)(Te,S)pseudobinary compounds have attracted great attention in thermoelectric community since they can be fabricated into high-performance flexible and hetero-shaped thermoelectric devices.However,in spite of the numerous studies,the‘brittleeductile’transition boundary in Ag_(2)(Te,S)is still unclear.In this work,a series of Te-rich Ag_(2)(Te,S)pseudobinary compounds have been prepared.The structure characterizations confirm they belong to the new-concept of meta-phase.The systematically investigation on the mechanical properties demonstrate that the‘brittl-eductile’transition boundary appears around x=0.1.Unexpected good ductility is observed in the Te-rich Ag_(2)Te_(1-x)S_(x)crystalizing in the Ag_(2)Te room-temperature monoclinic structure and high-temperature cubic structure,which are thought to be brittle before.Likewise,Ag content is found to be a very critical parameter determining the ductility of Te-rich Ag_(2)Te_(1-x)S_(x).Very slight Ag-deficiency can greatly deteriorate the ductility.The ther-moelectric properties of these ductile Te-rich Ag_(2)Te_(1-x)S_(x)pseudobinary compounds are investigated.A maximum thermoelectric figure-of-merit of 0.6 is obtained for Ag_(2)Te_(0.9)S_(0.1)at 600 K.This work sheds light on the future investigation of Ag_(2)(Te,S)pseudobinary compounds.

Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiC_p Hybrid Reinforced 6061 Aluminum Matrix Composites

The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp), submicron silicon carbide particles(1 μm Si Cp) and Ti particles were studied. The Al/Si Cp composite powder was prepared by high-energy ball milling, and then cold-pressed, sintered, hotextruded, and then heat-treated with different solution temperatures and aging times for the extruded composites. Optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy(EDS), X-ray diffractometer(XRD) and extrusion testing were used to analyze and test the microstructure and mechanical properties of aluminum matrix composites. The results show that after the multi-stage solid solution at 530 ℃×2 h+535 ℃×2 h+540 ℃×2 h, the particles are mainly equiaxed grains and uniformly distributed. There is no reinforcement agglomeration, and the surface is dense and the insoluble phase is basically dissolved. In the matrix, the strengthening effect is good, and the hardness and compressive strength are 179.43 HV and 680.42 MPa, respectively. Under this solution process, when the aluminum matrix composites are aged at 170 ℃ for 10 h, the hardness and compressive strength can reach their peaks and increase to 195.82 HV and 721.48 MPa, respectively.

Comparative Study on Microstructure and Mechanical Properties of Coarse-grained WC-based Cemented Carbides Sintered with Ultrafine WC or (W+C) as Additives

The effects of ultrafine WC(WC_(UF),0.5μm) or W(1μm) and C(0.3μm)(W+C)_(UF) additives on the densification,microstructure and mechanical properties of coarse-grained cemented carbides were compared systematically.Overall,the cemented carbides with WC_(UF)/(W+C)_(UF) additives are almost fully densification to be higher than 99%,and the average grain size is kept above 2.8μm.The WC_(UF) additive assists grains to(truncated)trigonal prism shape by two dimensional(2D) growth,whereas the(W+C)_(UF) additive assists grains to rounded shape by three dimensional(3D) growth,lowers WC contiguity and increases face-centered-cubic Co.The hardness and bending strength of(75WC_(C)-15WC_(UF))-10Co are 86.6 HRA and 2 272 MPa,respectively,both higher than those of(75WC_(C)-15(W+C)_(UF))-10Co,which could be ascribed to the enhanced densification and unblemished grains.However,the fracture toughness of the(75WC_(C)-15(W+C)_(UF))-10Co is 23.5 MPa·m^(1/2),higher than that of the(75WC_(C)-15WC_(UF))-10Co due to the uniform WC-Co structure and flexible binder phase.

Effect of(Cr,V)_(2)(C,N)on the Microstructure and Mechanical Properties of WC-10Co Cemented Carbides

WC-10Co cemented carbides with finer WC and narrower grain size distributions are produced by using(Cr,V)_(2)(C,N)as grain growth inhibitors.As a result,with the increase of(Cr_(0.9),V_(0.1))_(2)(C,N)and(V_(0.9),Cr_(0.1))_(2)(C,N),the grains size of WC and mean free path of Co phase decrease,and adjacency of WC increases.Refinement and homogenization of grains enhance the transverse rupture strength(TRS)and the hardness.Meanwhile,the deflection and bridging of cracks keep the fracture toughness at a respectable level.The WC-10Co-0.6(Cr_(0.9),V_(0.1))_(2)(C,N)-0.025(V_(0.9),Cr_(0.1))_(2)(C,N)cemented carbides exhibit excellent comprehensive mechanical properties with the TRS of 4602.6 MPa,hardness of 1835 kg/mm^(2),and fracture toughness of 10.39 MPa·m^(1/2),respectively.However,the large pores are caused by excess N larger than 0.03 wt%and deteriorates the mechanical properties.We provide a new approach to WC-Co cemented carbides preparation with a narrow grain size distribution by adding novel grain growth inhibitors.

Molecular mechanisms underlying the neuroprotection of environmental enrichment in Parkinson’s disease

Parkinson’s disease is the most common movement disorder,affecting about 1%of the population over the age of 60 years.Parkinson’s disease is characterized clinically by resting tremor,bradykinesia,rigidity and postural instability,as a result of the progressive loss of nigrostriatal dopaminergic neurons.In addition to this neuronal cell loss,Parkinson’s disease is characterized by the accumulation of intracellular protein aggregates,Lewy bodies and Lewy neurites,composed primarily of the proteinα-synuclein.Although it was first described almost 200 years ago,there are no disease-modifying drugs to treat patients with Parkinson’s disease.In addition to conventional therapies,non-pharmacological treatment strategies are under investigation in patients and animal models of neurodegenerative disorders.Among such strategies,environmental enrichment,comprising physical exercise,cognitive stimulus,and social interactions,has been assessed in preclinical models of Parkinson’s disease.Environmental enrichment can cause structural and functional changes in the brain and promote neurogenesis and dendritic growth by modifying gene expression,enhancing the expression of neurotrophic factors and modulating neurotransmission.In this review article,we focus on the current knowledge about the molecular mechanisms underlying environmental enrichment neuroprotection in Parkinson’s disease,highlighting its influence on the dopaminergic,cholinergic,glutamatergic and GABAergic systems,as well as the involvement of neurotrophic factors.We describe experimental pre-clinical data showing how environmental enrichment can act as a modulator in a neurochemical and behavioral context in different animal models of Parkinson’s disease,highlighting the potential of environmental enrichment as an additional strategy in the management and prevention of this complex disease.

An Efficient 3D CNN Framework with Attention Mechanisms for Alzheimer’s Disease Classification

Neurodegeneration is the gradual deterioration and eventual death of brain cells,leading to progressive loss of structure and function of neurons in the brain and nervous system.Neurodegenerative disorders,such as Alzheimer’s,Huntington’s,Parkinson’s,amyotrophic lateral sclerosis,multiple system atrophy,and multiple sclerosis,are characterized by progressive deterioration of brain function,resulting in symptoms such as memory impairment,movement difficulties,and cognitive decline.Early diagnosis of these conditions is crucial to slowing down cell degeneration and reducing the severity of the diseases.Magnetic resonance imaging(MRI)is widely used by neurologists for diagnosing brain abnormalities.The majority of the research in this field focuses on processing the 2D images extracted from the 3D MRI volumetric scans for disease diagnosis.This might result in losing the volumetric information obtained from the whole brain MRI.To address this problem,a novel 3D-CNN architecture with an attention mechanism is proposed to classify whole-brain MRI images for Alzheimer’s disease(AD)detection.The 3D-CNN model uses channel and spatial attention mechanisms to extract relevant features and improve accuracy in identifying brain dysfunctions by focusing on specific regions of the brain.The pipeline takes pre-processed MRI volumetric scans as input,and the 3D-CNN model leverages both channel and spatial attention mechanisms to extract precise feature representations of the input MRI volume for accurate classification.The present study utilizes the publicly available Alzheimer’s disease Neuroimaging Initiative(ADNI)dataset,which has three image classes:Mild Cognitive Impairment(MCI),Cognitive Normal(CN),and AD affected.The proposed approach achieves an overall accuracy of 79%when classifying three classes and an average accuracy of 87%when identifying AD and the other two classes.The findings reveal that 3D-CNN models with an attention mechanism exhibit significantly higher classification performance compared to other models,highlighting the potential of deep learning algorithms to aid in the early detection and prediction of AD.

Role of ferroptosis in Parkinson’s disease and intervention mechanism of acupuncture and moxibustion

Parkinson’s disease(PD)is the second neurodegenerative disease in the world.The pathological characteristics of PD are degeneration,loss and death of dopaminergic neurons in the substantia nigra of the midbrain.At present,most scholars believe that the main pathogenesis of PD is α-synuclein aggregation,oxidative stress,mitochondrial dysfunction and neuroinflammatory reaction.More and more studies have demonstrated that ferroptosis plays an important role in the occurrence and development of PD.Ferroptosis is a new type of cell death that is significantly different from traditional apoptosis,scorching and necrosis.Its main feature is iron-dependent lipid peroxidation.Some studies have found that the efficacy of acupuncture and moxibustion in the treatment of PD may be related to the regulation of ferroptosis.Therefore,this study mainly discusses the occurrence and development mechanism of ferroptosis and its role in PD,and the possible mechanism of acupuncture and moxibustion in the treatment of PD dopaminergic neurons,so as to provide theoretical basis for acupuncture and moxibustion in the treatment of PD.

妊娠糖尿病患者蛋白C、蛋白S和抗凝血酶Ⅲ水平及其与孕周的关系

目的探讨妊娠糖尿病(GDM)患者蛋白C(PC)、蛋白S(PS)和抗凝血酶Ⅲ(ATⅢ)水平及其与孕周的关系。方法选择2019年1月至2023年3月在医院就诊的232例GDM孕妇作为观察组,同时随机选取同期在医院进行孕检的268例正常孕妇作为对照组,比较两组一般资料和PC、PS和ATⅢ水平;按孕周将观察组和对照组分为孕中期和孕晚期,分别比较孕中期和孕晚期观察组和对照组PC、PS和ATⅢ水平。通过相关性分析,分析PC、PS和ATⅢ水平与孕周的相关性。结果与对照组相比,观察组PS和PC水平降低(P<0.05),但ATⅢ水平差异无统计学意义(P>0.05)。GDM患者PC和ATⅢ水平与孕周呈负相关(r=-0.156、-0.134,P<0.05)。结论GDM患者PS和PC水平降低,且随孕周增大,PC、PS和ATⅢ水平降低,应尽早进行干预,以减少血栓形成的风险。

Analysis of Alzheimer’s Disease:From Pathological Mechanism to Therapeutic Approach in Autophagy

As a“non-curable”disease,Alzheimer’s disease(AD)is the most common neurodegenerative disease in the aged population.Physical and mental pain exerts on every AD patient and their families.Even though there is no worldwide approved treatment against AD now,researchers have never given up on investigating and exploring potential approaches for curing AD.Gene therapy and drug treatment arise for alleviating AD symptoms.This paper illustrates the pathological mechanism of AD and focuses on the role of autophagy in AD pathology.Autophagy is a self-degrading mechanism to clear out dysfunctional cells;abnormal autophagy can directly trigger AD.This paper summarizes the effective and novel therapeutic approaches to treating AD by promoting autophagy activity,as well as AD diagnosis and assessment from early to severe stage,which provides promising approaches for researchers who are interested in AD treatments and feasible directions for science translational medicine.

基于C/S架构和物联网技术的可移动医疗设备共享调配系统的设计与应用

目的 设计一个可移动医疗设备高效管理与临床科室共享调配相结合的医疗设备共享管理平台,实现可移动医疗设备使用的全过程管理。方法 基于C/S架构,利用物联网技术优化整合现有医疗设备大数据资源,结合医院需求,构建可移动医疗设备共享调配系统,实现医疗设备共享管理、预约借用、统计分析等核心功能。通过比较系统上线前后呼吸机调配次数、平均调配时间、呼吸机使用率、单台呼吸机日均收入4个指标,分析系统应用效果。结果 系统上线后,呼吸机调配次数明显增加、平均调配时间明显降低,呼吸机使用率、单台呼吸机日均收入明显升高,且差异均有统计学意义(P﹤0.05),表明系统对提高呼吸机调配效率与使用效率有促进作用。结论 可移动医疗设备共享调配系统优化了医院设备管理流程,实现了医疗资源的统一调配,有效满足临床紧急抢救时医疗设备调配使用的相关需求,提高了医疗设备周转率以及设备管理人员的工作效率,有助于医院节约人员成本、降低采购费用,为医院管理者制定相关决策提供数据支撑。

NOTCH3基因C260S位点突变导致CADASIL的临床和影像学特征分析

目的探讨NOTCH3基因第5外显子C260S位点突变导致的伴有皮层下梗死和白质脑病的常染色体显性遗传性脑动脉病(cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy,CADASIL)家系的临床和影像学特征。方法选取2021年12月首都医科大学附属北京同仁医院来自同一家庭的CADASIL患者,对所有患者进行NOTCH3基因测序,回顾性分析患者的临床表现和头颅影像学特征。复习既往文献报道的导致同一位置氨基酸改变的其他突变类型的临床及影像学特征。结果4名家庭成员中,包括先证者(46岁,女)及其两个姐姐(分别为48岁和50岁)和女儿(18岁)。先证者及其父亲、两个姐姐都有偏头痛病史,其中大姐有记忆力减退;先证者患有脑梗死及伴有视觉先兆的偏头痛;先证者女儿体健;先证者父亲因脑梗死去世。4名家庭成员均存在C260S位点的NOTCH3基因突变。既往文献无此位点突变的报道,先证者头颅MRI示右侧脑桥亚急性梗死,颞叶、脑室周围及脑干异常高信号改变,其大姐脑桥可见腔隙性梗死灶。结论NOTCH3基因第5外显子c.778T>A(p.C260S)的罕见突变导致的CADASIL发病时间早,早期会出现认知障碍。合并偏头痛的脑干梗死患者,需警惕CADASIL的可能。

基于STC12C5A60S2单片机显示模块的实验研究

以常用的STC12C5A60S2单片机为主控芯片,以实验室单片机平台为载体,分别对数码管、LCD1602、LCD12864、OLED以及TFT五种显示屏进行DS18B20温度传感器采集与显示实验。实验测试结果表明五种显示模块均能有效采集并显示当前温度值,对比分析各种显示模块的性能,为不同应用场景下的显示需求提供了参考和借鉴,具有重要的实际应用价值。

纳米C-S-H/PCE对蒸养UHPC力学性能增强机理研究

目前超高性能混凝土(UHPC)制品的力学性能有待进一步提升,采用纳米C-S-H/PCE对UHPC进行增强在理论上是一种可行的技术途径。本文研究了蒸养条件下掺入以聚羧酸(PCE)为分散剂的纳米水化硅酸钙(C-S-H/PCE)对UHPC力学性能的影响,通过测试水化热、水化产物、微观形貌和孔结构等对其机理进行了分析。结果表明,掺入3.0%(质量分数)纳米C-S-H/PCE可以显著提高蒸养UHPC的抗压强度和抗折强度。掺入纳米C-S-H/PCE可以促进UHPC的早期水化,生成更多的水化硅酸钙(C-S-H)凝胶,使水化放热温峰增高,并缩短达到水化温峰的时间。掺入纳米C-S-H/PCE可有效改善蒸养UHPC的孔结构,在掺量为3.0%(质量分数)时总孔隙率最小,有害孔比例最低。该研究可为纳米C-S-H/PCE在蒸养UHPC中的应用提供参考。

湿气环境中CO_(2)-H_(2)S在α-Fe(110)密排面上吸附与点蚀机理研究

目的从微观尺度探究CO_(2)-H_(2)S(CO_(2)和H_(2)S共存)在湿气管道顶部的吸附特性,进而揭示点蚀机理。方法基于密度泛函理论的第一性原理,利用Materials Studio构建CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)密排面的吸附模型,对CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)面的吸附能、局域态密度、分波态密度和差分电荷密度进行仿真;利用高温高压釜模拟CO_(2)-H_(2)S-Cl^(-)腐蚀环境,分析L360钢在湿气环境中的腐蚀行为;最后,揭示含Cl^(-)湿气管道顶部CO_(2)-H_(2)S吸附机制与点蚀机理。结果CO_(2)、H_(2)S、CO_(2)-H_(2)S及CO_(2)-H_(2)S-Cl^(-)在最稳定位置时的吸附能分别为-4.065、-3.961、-8.538、-12.775e V,表明相较于CO_(2)与H_(2)S单独吸附,CO_(2)-H_(2)S在α-Fe(110)面的吸附能更负,Cl^(-)会进一步降低CO_(2)-H_(2)S的吸附能;且CO_(2)在与H_(2)S竞争环境电子中占优势;Cl^(-)会使CO_(2)-H_(2)S的局域态密度峰值降低,转移趋势为失去电子,基体和腐蚀介质的电子向着低能级跃迁释放出更多能量,进而加强了Fe与CO_(2)-H_(2)S间的化学键强度;Cl^(-)的2p轨道与Fe的3d轨道在-6.8 eV和-5.7 eV发生重叠,Cl^(-)被吸附到Fe表面并与Fe形成化学键生成氯化物,进而改变腐蚀产物膜的组分与结构,削弱产物膜的致密性和稳定性,减弱腐蚀阻抗力。在含Cl^(-)湿气的CO_(2)-H_(2)S环境中,液相中的Cl^(-)浓度升高,使L360钢的气相平均腐蚀速率逐渐增大,最高达2.935mm/a,点蚀越发严重。结论CO_(2)与H_(2)S在α-Fe(110)面吸附存在一定的协同和竞争作用,协同促进金属的腐蚀,FeCO3会优先沉积成膜,但H_(2)S会抑制FeCO3的生长,腐蚀产物以FeS为主;Cl^(-)会增强CO_(2)-H_(2)S与α-Fe(110)面间的作用力,弱化腐蚀产物膜层的保护性,进一步加速金属腐蚀、尤其是点蚀。