Active suspension control of a one-wheel car model using single input rule modules fuzzy reasoning and a disturbance observer

This paper presents the construction of an active suspension control of a one-wheel car model using fuzzy reasoning and a disturbance observer. The one-wheel car model to be treated here can be approximately described as a nonlinear two degrees of freedom system subject to excitation from a road profile. The active control is designed as the fuzzy control inferred by using single input rule modules fuzzy reasoning, and the active control force is released by actuating a pneumatic actuator. The excitation from the road profile is estimated by using a disturbance observer, and the estimate is denoted as one of the variables in the precondition part of the fuzzy control rules. A compensator is inserted to counter the performance degradation due to the delay of the pneumatic actuator. The experimental result indicates that the proposed active suspension system improves much the vibration suppression of the car model. Key words One-wheel car model - Active suspension system - Single input rule modules fuzzy reasoning - Pneumatic actuator - Disturbance observer Document code A CLC number TH16

Pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer

This paper presents the construction of a pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer. The one-wheel car model can be approximately described as a nonlinear two degrees of freedom system subject to excitation from a road profile. The active control is composed of fuzzy and disturbance controls, and the active control force is constructed by actuating a pneumatic actuator. A phase lead-lag compensator is inserted to counter the performance degradation due to the delay of the pneumatic actuator. The experimental result indicates that the proposed active suspension improves much the vibration suppression of the car model.

A Primary Analysis of Car Model Demands In China

According to Chinese national auto standard GB3730.1 - 88, cars are classified as 5 grades by engine displacement, i.e. mini car, subcom-pact car, compact car, intermediate car and limousine.

A new car-following model with consideration of the traffic interruption probability

In this paper, we present a new car-following model by taking into account the effects of the traffic interruption probability on the car-following behaviour of the following vehicle. The stability condition of the model is obtained by using the linear stability theory. The modified Korteweg-de Vries （KdV） equation is constructed and solved, and three types of traffic flows in the headway sensitivity space-stable, metastable, and unstable--are classified. Both the analytical and simulation results show that the traffic interruption probability indeed has an influence on driving behaviour, and the consideration of traffic interruption probability in the car-following model could stabilize traffic flow.

A velocity-difference-separation model for car-following theory

We introduce a velocity-difference-separation model that modifies the previous models in the literature. The improvement of this new model over the previous ones lies in that it not only theoretically retains many strong points of the previous ones, but also performs more realistically than others in the dynamical evolution of congestion. Furthermore, the proposed model is investigated with analytic and numerical methods, with the finding that it can demonstrate some complex physical features observed in real traffic such as the existence of three phases： free flow, synchronized flow, and wide moving jam; sudden flow drop in flow-density plane; and traffic hysteresis in transition between the free and the synchronized flow.

Feedback control scheme of traffic jams based on the coupled map car-following model

Based on the pioneering work of Konishi et al. [Phys. Rev. E （1999） 60 4000], a new feedback control scheme is presented to suppress traffic jams based on the coupled map car-following model under the open boundary condition. The effect of the safe headway on the traffic system is considered. According to the control theory, the condition under which traffic jams can be suppressed is analyzed. The results are compared with the previous results concerning congestion control. The simulations show that the suppression performance of our scheme on traffic jams is better than those of the previous schemes, although all the schemes can suppress traffic jams. The simulation results are consistent with theoretical analyses.

A control method for congested traffic in the coupled map car-following model

Based on the pioneer work of Konishi et al, a new control method is presented to suppress the traffic congestion in the coupled map （CM） car-following model under an open boundary. A control signal concluding the velocity differences of the two vehicles in front is put forward. The condition under which the traffic jam can be contained is analyzed. The results axe compared with that presented by Konishi et al [Phys. Rev. 1999 E 60 4000-4007]. The simulation results show that the temporal behavior obtained by our method is better than that by the Konishi＇s et al. method, although both the methods could suppress the traffic jam. The simulation results are consistent with the theoretical analysis.

利用CARS-BPNN模型的南疆枣园土壤有机质高光谱反演

土壤有机质(SOM)含量是制定枣园土壤施肥方案的主要依据。合理的施肥方案对提升红枣品质、减少农户投入和增加枣园产出有重要意义。利用传统方法获取枣园SOM含量耗费时间和资源,不符合枣园精准施肥管理的需求,土壤有机质高光谱检测是一种有效的替代方法。为筛选南疆枣园SOM的高光谱快速检测模型,采用网格布点法采集158个枣园土壤样品,测定风干土样的室内高光谱数据和SOM含量。分别将400~2400 nm全波段(R)和通过竞争自适应加权算法(CARS)、连续投影算法(SPA)、粒子群优化算法(PSO)三种数据降维算法筛选的数据集与偏最小二乘回归(PLSR)、反向传播神经网络(BPNN)、卷积神经网络(CNN)三种建模方法结合构建12种枣园SOM含量的组合反演模型,通过对比模型的精度评价指标和训练时间,筛选枣园SOM含量最优光谱反演模型。结果表明:(1)CARS、SPA、PSO三种降维算法都能将光谱数据压缩至原来的10%以下,筛选波长数分别由原来的2001个变量降为98、156、102个,降维组合模型的验证集RPD均大于1.50,均能实现对枣园SOM含量的反演,与R组合模型相比,降维组合模型至少能节省30%的时间成本,特别是与BPNN和CNN等构建的组合模型,能节省90%的训练时间,且模型稳定性更强,模型效果更优。(2)CARS数据集构建组合模型的验证集R^(2)均大于0.85,RPD均大于2.50,RPIQ均大于1.60,在三种降维算法中效果最好;PSO数据集的组合模型验证效果略低于CARS数据集,但优于R数据集,R^(2)均大于0.80、RPD均大于2.00;SPA数据集构建组合模型的验证效果要低于R数据集,在三种降维算法中效果最差。(3)BPNN和CNN两种方法的反演模型验证效果均优于PLSR模型,而在模型训练时间和模型验证效果等方面,BPNN模型优于CNN模型,其结合CARS数据集的验证效果最优,R^(2)为0.91、PRD为3.34、RPIQ为3.17、nRMSE%为11.93,训练时间为58.00 s,模型符合快速检测枣园SOM含量的要求。CARS-BPNN模型为反演南疆枣园SOM的最优模型,研究结果能够为南疆枣园土壤养分快速检测与制定施肥方案提供参考。

An improved car-following model with consideration of the lateral effect and its feedback control research

A car-following model is presented, in which the effects of non-motor vehicles on adjacent lanes are taken into ac- count. A control signal including the velocity differences between the following vehicle and the target vehicle is introduced according to the feedback control theory. The stability condition for the new model is derived. Numerical simulation is used to demonstrate the advantage of the new model including the control signal; the results are consistent with the analytical ones

A new coupled map car-following model considering drivers' steady desired speed

Based on the pioneering work of Konishi et al., in consideration of the influence of drivers＇ steady desired speed ef/ect on the traffic flow, we develop a new coupled map car-following model in the real world. By use of the control theory, the stability condition of our model is derived. The validity of the present theoretical scheme is verified via numerical simulation, confirming the correctness of our theoretical analysis.

Vehicular Electronic Image Stabilization System Based on a Gasoline Model Car Platform

Noise,vibration and harshness(NVH)problems in vehicle engineering are always challenging in both traditional vehicles and intelligent vehicles.Although high accuracy manufacturing,modern structural roads and advanced suspension technology have already significantly reduced NVH problems and their impacts;off-road condition,obstacles and extreme operating condition could still trigger NVH problems unexpectedly.This paper proposes a vehicular electronic image stabilization(EIS)system to solve the vibration problem of the camera and ensure the environment perceptive function of vehicles.Firstly,feature point detection and matching based on an oriented FAST and rotated BRIEF(ORB)algorithm are implemented to match images in the process of EIS.Furthermore,a novel improved random sampling consensus algorithm(i-RANSAC)is proposed to eliminate mismatched feature points and increase the matching accuracy significantly.And an adaptive Kalman filter(AKF)is applied to improve the adaptability of the vehicular EIS.Finally,an experimental platform based on a gasoline model car was established to validate its performance.The experimental results show that the proposed EIS system can satisfy vehicular performance requirements even under off-road condition with obvious obstacles.

A new coupled-map car-following model based on a transportation supernetwork framework

A new car-following model is proposed by considering information from a number of preceding vehicles with intervehicle communication. A supernetwork architecture is first described, which has two layers： a traffic network and a communication network. The two networks interact with and depend on each other. The error dynamic system around the steady state of the model is theoretically analyzed and some nonjam criteria are derived. A simple control signal is added to the model to analyze the criteria of suppressing traffic jams. The corresponding numerical simulations confirm the correctness of the theoretical analysis. Compared with previous studies concerning coupled map models, the controlled model proposed in this paper is more reasonable and also more effective in the sense that it takes into account the formation of traffic congestion.

Numerical Simulation of Motor Vehicles’ Courtesy Behavior on Crosswalk Based on Car-Following Model

In observing driver courtesy towards pedestrians at unsignalized crosswalks, a behavioral model was adopted in a simulation based on the GM Car-Following Model. The SIMI Motion Software was used to extract the vehicle operation data from Wenyi South Road and Hanyuan Road in Xi'an City. The parameters of the GM Car-Following Model were calibrated by genetic algorithm. The road simulation environment based on the Car-Following Model was constructed by MATLAB. In the case of no stopping, uniform deceleration avoidance with advance notice, emergency brake avoidance without advance notice, changes such as the displacement of the Car-Following queue, headway, speed, acceleration, and deceleration were analyzed by numerical simulation. The results show that when there is advance notice before the crosswalk, the minimum headway distances of Car1-Car2, Car2-Car3, Car3-Car4 and Car4-Car5 are 7.09 m, 7.38 m, 7.65 m, 7.91 m, and the average rates of change of the headway during deceleration are 0.78 m/s, 0.74 m/s, 0.71 m/s, 0.68 m/s respectively;in the absence of advance notice before the crosswalk, the minimum headway distances of Car1-Car2, Car2-Car3, Car3-Car4 and Car4-Car5 are 7.28 m, 7.75 m, 8.19 m, 8.59 m, and the average rates of change of the headway during deceleration are 1.57 m/s, 1.25 m/s, 1.04 m/s, 0.96 m/s, respectively. Therefore, in order to effectively prevent the occurrence of vehicle rear-end events, it's necessary to set traffic signs and markings on the preceding section of the intersection or road exhibiting behavioral comity.

A control method applied to mixed traffic flow for the coupled-map car-following model

In light of previous work [Phys. Rev. E 60 4000 （1999）], a modified coupled-map car-following model is proposed by considering the headways of two successive vehicles in front of a considered vehicle described by the optimal velocity function. The non-jam conditions are given on the basis of control theory. Through simulation, we find that our model can exhibit a better effect as p = 0.65, which is a parameter in the optimal velocity function. The control scheme, which was proposed by Zhao and Gao, is introduced into the modified model and the feedback gain range is determined. In addition, a modified control method is applied to a mixed traffic system that consists of two types of vehicle. The range of gains is also obtained by theoretical analysis. Comparisons between our method and that of Zhao and Gao are carried out, and the corresponding numerical simulation results demonstrate that the temporal behavior of traffic flow obtained using our method is better than that proposed by Zhao and Gao in mixed traffic systems.

Traffic chaos and its prediction based on a nonlinear car-following model

This paper discusses the dynamic behavior and its predictions for a simulated traffic flow based on the nonlinear response of a vehicle to the leading car＇s movement in a single lane. Traffic chaos is a promising field, and chaos theory has been applied to identify and predict its chaotic movement. A simulated traffic flow is generated using a car-following model（ GM model）, and the distance between two cars is investigated for its dynamic properties. A positive Lyapunov exponent confirms the existence of chaotic behavior in the GM model. A new algorithm using a RBF NN （radial basis function neural network） is proposed to predict this traffic chaos. The experiment shows that the chaotic degree and predictable degree are determined by the first Lyapunov exponent. The algorithm proposed in this paper can be generalized to recognize and predict the chaos of short-time traffic flow series

A car-following model with the anticipation effect of potential lane changing

In this paper, a new car-following model is presented, taking into account the anticipation of potential lane changing by the leading vehicle. The stability condition of the model is obtained by using the linear stability theory. The modified Korteweg-de Vries （KdV） equation is constructed and solved, and three types of traffic flow in the headway-sensitivity space, namely stable, metastable and unstable ones, are classified. Both the analytical and simu- lation results show that anxiety about lane changing does indeed have an influence on driving behavior and that a consideration of lane changing probability in the car-following model could stabilize traffic flows. The quantitative relationship between stability improvement and lane changing probability is also investigated.

Improved Car-Following Model Considering Modified Backward Optimal Velocity and Velocity Difference with Backward-Looking Effect

In this paper, a new traffic flow model called the forward-backward velocity difference (FBVD) model based on the full velocity difference model is proposed to investigate the backward-looking effect by applying a modified backward optimal velocity using generalized backward maximum speed. The FBVD model belongs to the family of microscopic models that consider spatiotemporally continuous formulations. Neutral stability conditions of the discrete car-following model are derived using the linear stability theory. The stability analysis results prove that the modified backward optimal velocity has a significant positive effect in stabilizing the traffic flow. Through nonlinear analysis, a kink-antikink solution is derived from the modified Korteweg-de Vries equation of the FBVD model to explain traffic congestion of the model. The validity of this theoretical model is checked using numerical results, according to which traffic jams were found to have been significantly diminished by the introduction of the modified backward optimal velocity.

Comparative Genre Analysis on RA Introductions of Computer Science Using CARS Model

Using Swales’CARS model,the present study combines the methods of quantitative analysis and qualitative analysis and makes a comparative analysis on the moves and steps of RA introductions between Chinese English journals and international English journals,which will benefit researchers in RA writing and publishing in core English journals.

A New Efficient Obstacle Avoidance Control Method for Cars Based on Big Data and Just-in-Time Modeling

This paper provides a new obstacle avoidance control method for cars based on big data and just-in-time modeling. Just-in-time modeling is a new kind of data-driven control technique in the age of big data and is used in various real systems. The main property of the proposed method is that a gain and a control time which are parameters in the control input to avoid an encountered obstacle are computed from a database which includes a lot of driving data in various situations. Especially, the important advantage of the method is small computation time, and hence it realizes real-time obstacle avoidance control for cars. From some numerical simulations, it is showed that the new control method can make the car avoid various obstacles efficiently in comparison with the previous method.

ONE-DIMENSIONAL CELLULAR AUTOMATON MODEL OFTRAFFIC FLOW BASED ON CAR-FOLLOWING IDEA

An improved one-dimensional CA ( Cellular Automaton) traffic model was proposed to describe the highway traffic under the periodic boundary conditions. This model was based on the idea of the car-following model, which claims that the motion of a vehicle at one time step depends on both its headway and the synchronous motion of the front vehicle, thus including indirectly the influence of its sub-neighboring vehicle. It? addition, the so-called safety distance was introduced to consider the deceleration behavior of vehicles and the stochastic factor was taken into account by introducing the deceleration probability. Meanwhile, the conditional deceleration in the model gives a better description of the phenomena observed on highways. It is found that there exists the metastability and hysteresis effect of traffic flow in the neighborhood of critical density under different initial conditions. Since this model gives a reasonable depiction of the motion of a single vehicle, it is easy to be extended to the case of traffic flow tinder the control of traffic lights in cities.