Influence of pore structure heterogeneity on channeling channels during hot water flooding in heavy oil reservoir based on CT scanning

Hot water flooding is an effective way to develop heavy oil reservoirs.However,local channeling channels may form,possibly leading to a low thermal utilization efficiency and high water cut in the reservoir.The pore structure heterogeneity is an important factor in forming these channels.This study proposes a method that mixes quartz sand with different particle sizes to prepare weakly heterogeneous and strongly heterogeneous models through which hot water flooding experiments are conducted.During the experiments,computer tomography(CT)scanning identifies the pore structure and micro remaining oil saturation distribution to analyze the influence of the pore structure heterogeneity on the channeling channels.The oil saturation reduction and average pore size are divided into three levels to quantitatively describe the relationship between the channeling channel distribution and pore structure heterogeneity.The zone where oil saturation reduction exceeds 20%is defined as a channeling channel.The scanning area is divided into 180 equally sized zones based on the CT scanning images,and threedimensional(3D)distributions of the channeling channels are developed.Four micro remaining oil distribution patterns are proposed,and the morphology characteristics of micro remaining oil inside and outside the channeling channels are analyzed.The results show that hot water flooding is more balanced in the weakly heterogeneous model,and the oil saturation decreases by more than 20%in most zones without narrow channeling channels forming.In the strongly heterogeneous model,hot water flooding is unbalanced,and three narrow channeling channels of different lengths form.In the weakly heterogeneous model,the oil saturation reduction is greater in zones with larger pores.The distribution range of the average pore size is larger in the strongly heterogeneous model.The network remaining oil inside the channeling channels is less than outside the channeling channels,and the hot water converts the network remaining oil into cluster,film,and droplet remaining oil.

Fatigue properties and damage constitutive model of salt rock based on CT scanning

To investigate the macroscopic fatigue properties and the mesoscopic pore evolution characteristics of salt rock under cyclic loading,fatigue tests under different upper-limit stresses were carried out on salt rock,and the mesoscopic pore structures of salt rock before and after fatigue tests and under different cycle numbers were measured using CT scanning instrument.Based on the test results,the effects of the cycle number and the upper-limit stress on the evolution of cracks,pore morphology,pore number,pore volume,pore size,plane porosity,and volume porosity of salt rock were analyzed.The failure path of salt rock specimens under cyclic loading was analyzed using the distribution law of plane porosity.The damage variable of salt rock under cyclic loading was defined on basis of the variation of volume porosity with cycle number.In order to describe the fatigue deformation behavior of salt rock under cyclic loading,the nonlinear Burgers damage constitutive model was further established.The results show that the model established can better reflect the whole development process of fatigue deformation of salt rock under cyclic loading.

Prediction of carbonate permeability from multiresolution CT scans and deep learning

The low-resolution CT scan images obtained from drill core generally struggle with problems such as insufficient pore structure information and incomplete image details.Consequently,predicting the permeability of heterogeneous reservoir cores relies heavily on high-resolution CT scanning images.However,this approach requires a considerable amount of data and is associated with high costs.To solve this problem,a method for predicting core permeability based on deep learning using CT scan images with diff erent resolutions is proposed in this work.First,the high-resolution CT scans are preprocessed and then cubic subsets are extracted.The permeability of each subset is estimated using the Lattice Boltzmann Method(LBM)and forms the training set for the convolutional neural network(CNN)model.Subsequently,the highresolution images are downsampled to obtain the low-resolution grayscale images.In the comparative analysis of the porosities of diff erent low-resolution images,the low-resolution image with a resolution of 10%of the original image is considered as the test set in this paper.It is found that the permeabilities predicted from the low-resolution images are in good agreement with the values calculated by the LBM.In addition,the test data are compared with the results of the Kozeny-Carman(KC)model and the measured permeability of the whole sample.The results show that the prediction of the permeability of tight carbonate rock based on deep learning using CT scans with diff erent resolutions is reliable.

Hemangioblastoma Incidentally Discovered at CT Scan in Bamako: About a Case

Hemangioblastomas are benign vascular tumors of the brain. These are rare tumors, usually located in the cerebellum and most often affecting young adults. The aim was to study the value of CT in the management of hemangioblastoma through observation. We report the case of a 38-year-old patient referred to the radiology and Medical Imaging Department of the Marie Curie Medical Clinic in Bamako, Mali, for an orbito-cerebral CT scan in a context of bilateral eyelid edema. The examination was performed using multi-slice computed tomography (16 slices) with reconstruction in the 3 planes of space without and with the injection of an iodinated contrast agent. The CT scan was crucial in making the diagnosis of hemangioblastoma incidentally, which allowed for adequate management. The patient was operated on, and the radiological outcome was favorable, without significant cystic formation, after postoperative control and clinical signs were resolved. CT can be an interesting alternative in countries like ours despite MRI being the examination of choice in hemangioblastomas.

Analysis of the microstructure of microbial solidified sand and engineering residue based on CT scanning

A close relationship exists between the pore network structure of microbial solidified soil and its macroscopic mechanical properties.The microbial solidified engineering residue and sand were scanned by computed tomography(CT),and a three-dimensional model of the sample was established by digital image processing.A spatial pore network ball-stick model of the representative elementary volume(REV)was established,and the REV parameters of the sample were calculated.The pore radius,throat radius,pore coordination number,and throat length were normally distributed.The soil particle size was larger after solidification.The calcium carbonate content of the microbial solidified engineering residue’s consolidated layer decreased with the soil depth,the porosity increased,the pore and throat network developed,and the ultimate structure was relatively stable.The calcium carbonate content of the microbial solidified sand’s consolidated layer decreased and increased with the soil depth.The content reached the maximum,the hardness of the consolidated layer was the highest,and the development of the pore and throat network was optimum at a depth of 10–15 mm.

Generation and Analysis of Sandstone Pore Structure Images Based on CT Scanning and Generative Adversarial Network

In this study,cylindrical sandstone samples were imaged by CT scanning technique,and the pore structure images of sandstone samples were analyzed and generated by combining with StyleGAN2-ADA generative adversarial network(GAN)model.Firstly,nine small column samples with a diameter of 4 mm were drilled from sandstone samples with a diameter of 2.5 cm,and their CT scanning results were preprocessed.Because the change between adjacent slices was little,using all slices directly may lead to the problem of pattern collapse in the process of model generation.In order to solve this problem,one slice was selected as training data every 30 slices,and the diversity of slices was verified by calculating the LPIPS values of these slices.The results showed that the strategy of selecting one slice every 30 slices could effectively improve the diversity of images generated by the model and avoid the phenomenon of pattern collapse.Through this process,a total of 295 discontinuous two-dimensional slices were generated for the generation and segmentation analysis of sandstone pore structures.This study can provide effective data support for accurate segmentation of porous medium structures,and simultaneously improves the stability and diversity of generative adversarial network under the condition of small samples.

Three-dimensional finite element simulation and reconstruction of jointed rock models using CT scanning and photogrammetry

The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.

Quantitative investigation of multi-fracture morphology during TPDF through true tri-axial fracturing experiments and CT scanning

Due to the reservoir heterogeneity and the stress shadow effect, multiple hydraulic fractures within one fracturing segment cannot be initiated simultaneously and propagate evenly, which will cause a low effectiveness of reservoir stimulation. Temporary plugging and diverting fracturing(TPDF) is considered to be a potential uniform-stimulation method for creating multiple fractures simultaneously in the oilfield. However, the multi-fracture propagation morphology during TPDF is not clear now. The purpose of this study is to quantitatively investigate the multi-fracture propagation morphology during TPDF through true tri-axial fracturing experiments and CT scanning. Critical parameters such as fracture spacing, number of perforation clusters, the viscosity of fracturing fluid, and the in-situ stress have been investigated. The fracture geometry before and after diversion have been quantitively analyzed based on the two-dimensional CT slices and three-dimensional reconstruction method. The main conclusions are as follows:(1) When injecting the high viscosity fluid or perforating at the location with low in-situ stress, multiple hydraulic fractures would simultaneously propagate. Otherwise, only one hydraulic fracture was created during the initial fracturing stage(IFS) for most tests.(2) The perforation cluster effectiveness(PCE) has increased from 26.62% during the IFS to 88.86% after using diverters.(3) The diverted fracture volume has no apparent correlation with the pressure peak and peak frequency during the diversion fracturing stage(DFS) but is positively correlated with water-work.(4) Four types of plugging behavior in shale could be controlled by adjusting the diverter recipe and diverter injection time, and the plugging behavior includes plugging the natural fracture in the wellbore, plugging the previous hydraulic fractures, plugging the fracture tip and plugging the bedding.

Differentiation of CT scan diagnosis between minimal fat renal angiomyolipoma with sufficient blood supply and clear cell renal carcinoma

Objective： The aim of our study was to investigate the feature of minimal fat renal angiomyolipoma with sufficient blood supply using CT scans and improve the diagnosis accuracy required to differentiate it from clear cell renal carcinoma. Methods： Retrospective analysis of 24 cases of post-surgery confirmed angiomyolipoma with sufficient blood supply （total of 25 tumors） in our hospital that were used for a pathological comparison study. Results： Among the 24 patients diagnosed with angiomyolipoma, nobody had bloody urine, Of the 96 patients diagnosed with clear cell renal cancer, 14 had bloody urine （14.6%）. In our studied group, the size of angiomyolipomas with sufficient blood supply was between 1.5 cm× 2.0 cm to 8.0 cm× 10.0 cm. During CT scan analysis, twenty tumors had similar density, and five of them had higher density. Only one tumor had a few dots of calcification （4%）. Adipose tissue was not visible in 9 tumors, while 16 tumors had visible dots of adipose tissue, as visualized by CT scan. Intensive scanning indicated that all of the tumors showed a strong enhancement in the renal corticomedullary phase. Twenty tumors had significant heterogeneous enhancement in the early phase, while another set of five cases had homogenous prolonged enhancement. Nineteen patients had surgery to remove the angiomyolipomas, while six patients had single side kidney removal due to misdiagnosis for renal cancer in cases where the tumor severely compromised the renal parenchyma and sinus. All 25 cases were classified as renal angiomyolipoma by pathological analysis. Within the 96 cases of clear cell renal cancer, 64 tumors had relatively low density, 29 tumors had equal density, and 3 cases had relatively higher density. Fourteen of the tumors had calcification （14.6%）, and none of them had visualized adipose tissue. Enhanced CT scans indicated that 69 cases of renal cancer showed significant enhancement in the renal corticomedu^ary phase, which had the abnormal pattern of ＂fast-in-and-fast-out＂. Additionally, 27 cases had slow and prolonged enhancement. Conclusion： Similar to clear cell renal carcinomas, angiomyolipomas with sufficient blood supply also appear to exhibit abnormal enhancement with a pattern of＂fast-in-and-fast-out＂ during the early phase, which is easily misdiagnosed as renal cancer. It is difficult to differentiate them merely through CT scans; the key to differentiating them is to identify the adipose tissue within the tumor. Therefore, it is helpful to use thin-layer CT scans to locate the adipose tissue.

Optimum Threshold Estimation of Thorax CT Scan for COVID-19 Diagnosis in a Single Center in Cameroon

Objective: To evaluate the lung CT scan as a possible predictive diagnostic method for COVID-19 in the Cameroonian context. Methods: We designed a cross sectional study. Suspected cases of COVID-19 during the first wave at the national social insurance fund (NSIF) hospital were screened with both COVID-19 with lung CT scan and a PCR test. Univariate analysis was performed for sample description and multivariate analysis to assess the correlation between positive results for the PCR and other parameters. We estimated the optimum threshold of sensitivity/specificity, and area under curve using the empirical method and package. Results: A total of 62 suspected COVID-19 cases were recorded, predominantly males (Sex Ratio = 2.2) with a median age of 58.5 (IQR = 19.7). Among our 62 patients, 29 (46.8%) were confirmed COVID-19 cases with positive PCR results. All the patients had a thorax CT scan with a median impairment of 40% (IQR = 20%). The optimum threshold estimate for CT scan for COVID-19 infection diagnosis was 60% (95% CI = 25% - 80%). Overall, the sensitivity and specificity estimates were 0.30 (95% CI = 0.15 - 0.49) and 0.87 (95% CI = 0.70 - 0.96), respectively, leading to an Area Under Curve (AUC) estimate of 0.59 (95% CI = 0.46, 0.71). Conclusion: In this setting, lung CT scan was neither sensitive nor specific to predict COVID-19 disease.

CT Scan of the Foot in Patients with Chronic Non-Healing Diabetic Foot Ulcer

Background: Diabetes mellitus is a chronic disease where there is an increased blood sugar level in the body which is either caused due to inability of the pancreas to secrete insulin or the body’s inability to utilize it. The prevalence of diabetes mellitus is growing rapidly worldwide. Statistics show that in the year 2014, there were a total of 422 million cases of DM. Diabetes mellitus is a major cause of heart attacks, kidney failure, blindness and leg amputations. Diabetic foot ulcers are quite common and are estimated to affect nearly 15% of all diabetic patients during their lifetime. In long standing diabetic patients with chronic non-healing ulcers, bony changes or deformities are not uncommon. These bony changes can be identified using CT scans. Materials and Methods: An observational study was conducted on a total of 40 patients with chronic non-healing ulcer attending the surgery outpatient department of Saveetha Medical College, Chennai, Tamilnadu. The CT-scans of their foot were observed for deformities or bony changes. Results: Out of 40 patients, 67.5% were males and 32.5% were females. A maximum number of subjects fell under the age group of 51 - 60 years. The most common site of the ulcer was found to be in the plantar surface of big toe (53%). Among the 40 patients, 33 of them were found to have bony abnormalities on the CT scan of foot and no apparent changes were seen in the rest. Bone erosions (35%), osteopenic changes (22.5%), Charcot’s joint (2.5%), osteophyte formation (12.5) and reduced joint space (10%) were the predominant changes observed on the CT scans of the study population.

CT Scans and Delays in Diagnosis of Stroke in Senegal’s Regional Hospitals: A Multicenter Study of 655 Cases

Stroke represents the 2nd cause of mortality and 1st cause of physical disability in the adult population. In Senegal, it represents 30% of hospitalization and 2/3 of the mortality in the department of neurology in the capital city, Dakar. Objective: To specify the types of stroke and to evaluate diagnostic delays in Senegal’s regional hospitals. Materials and Methods: This was a retrospective, cross-sectional, descriptive, multicentric study for 4 years (from 2014 to 2017) including any patient presenting a clinical suspicion with a CT scan confirmation of stroke in one of the 9 regional hospitals in Senegal with a recruitment period of 6 months per hospital. CT scans were performed with a 16 slices machine in 6 hospitals, 4 slices in 2 hospitals and 2 slices in 1 hospital. We studied the types and location of strokes, the associated signs and the time from stroke onset to admission and the time from admission to CT scan. Results: 655 patients were retained including 322 men and 333 women for an M/F ratio of 0.96. The average age was 63 years (range: 7 years, 112 years). High blood pressure was noted in 59.2% of patients and diabetes in 10.7% of patients. Strokes were ischemic in 76% of cases involving the middle cerebral artery in 73% of cases and hemorrhagic in 24%, of which 80.7% were deep localized. A mass effect was noted in 7.5% of cases, an engagement in 6.9% of cases and ventricular hemorrhage in 2.7% of cases. The delay between the onset of the deficit and admission was less than 6 hours in 10.6% of patients. The time between the onset of stroke and admission to hospital was specified in 416 patients (63.5%) of the study population, it was less than 6 hours in 10.6% of patients, between 6 hours and 24 hours for 29.3% and more than 24 hours for 60.1%. Between admission and the CT scan, the time was precise in 459 patients (70%), it was less than 6 hours in 37.9%, between 6 hours and 24 hours in 43.6 % and more than 24 hours in 18.5%. Conclusion: CT is central to the diagnosis of stroke in rural areas. However, there is a significant delay in diagnosis and management.

Evaluation of CT Scans Reports in Pancreatic Tumors at Ouagadougou (Burkina Faso)

Background: There are no recommendations for the use of standardised CT reports in oncology in our country. The aim of this study was to evaluate CT reports of pancreatic tumors in the city of Ouagadougou. Materials and Methods: Descriptive, multicenter, cross-sectional study conducted from 1st January 2013 to 31 December 2021. It concerned CT scan reports from five public and private imaging centers in the city of Ouagadougou. During the study period, 41 reports of pancreatic tumors were collected. We evaluated the reports using the standardized model developed by the Society of Abdominal Radiology and the American Pancreatic Association as a reference. Results: CT scan reports were not standardised. The writing style was free. Concerning the lesion, the aspect of the tumor at the pancreatic time was the item with the least information (24.4%). The status of the superior mesenteric artery was mentioned in 17%, the celiac trunk and the portal trunk in 12.2% of cases and 9.7% for the superior mesenteric vein. No report noted the appearance of the common hepatic artery. The status of the lymph nodes, liver and peritoneal cavity was mentioned in all reports. The exact location of the lymph nodes was not specified. The analysis of the reports classified them into two groups: potentially resectable tumours in the absence of secondary locations in 31.7% of cases and locally advanced tumours or presence of metastases in 68.3% of cases. Conclusion: The CT reports were not standardized. The items allowing evaluating the loco-regional extension of the tumor were the least specified. This may suggest the high rate of potentially resectable tumours in our study.

A Simple Computational Approach for the Texture Analysis of CT Scan Images Using Orthogonal Moments

This paper is a study on texture analysis of Computer Tomography (CT) liver images using orthogonal moment features. Orthogonal moments are used as image feature representation in many applications like invariant pattern recognition of images. Orthogonal moments are proposed here for the diagnosis of any abnormalities on the CT images. The objective of the proposed work is to carry out the comparative study of the performance of orthogonal moments like Zernike, Racah and Legendre moments for the detection of abnormal tissue on CT liver images. The Region of Interest (ROI) based segmentation and watershed segmentation are applied to the input image and the features are extracted with the orthogonal moments and analyses are made with the combination of orthogonal moment with segmentation that provides better accuracy while detecting the tumor. This computational model is tested with many inputs and the performance of the orthogonal moments with segmentation for the texture analysis of CT scan images is computed and compared.

The application of CT scan in Nuss procedure for pectus excavatum

Objective To study the application CT scans in Nuss procedure for pectus excavatum. Methods 648 children with pectus excavatum underwent Nuss procedure from July 2002 to September 2008. The preoperative CT scan was carried out for evaluation of the deformity degree and morphology classification of chest wall malformation,

Early Detection of Lung Cancer Using CT Scan and Bronchoscopy in a High Risk Population

Background: Computed tomography (CT) and bronchoscopy have been shown to improve the detection rates of peripheral and central lung cancers (LC), respectively. However, the performance of the combination of CT and bronchoscopy in detecting LC, in high-risk patients, is not clear. Patients & Methods: This prospective study included 205 high-risk patients with a history of at least 2 of the following risk factors: (1) heavy smoking;(2) aero-digestive cancer;(3) pulmonary asbestosis or;(4) chronic obstructive pulmonary disease. Patients were offered chest X-ray, sputum cytology, conventional white-light followed by autofluorescence beonchoscopy (WL/AFB) and low-dose spiral CT both at baseline and follow-up visits. Results: Seven patients (3.4%) were diagnosed with LC or carcinoma in-situ (CIS) at baseline: CT evaluation detected 5 LC/CIS, while WL/AFB evaluation also identified 5 LC/CIS, 2 of which were not detected on CT. Six (85%) of these baseline lesions were early stage (0/IA). The relative-sensitivity of CT with WL/ AFB was 40% better than CT alone. On four year follow-up, 20 patients (9.8%) were diagnosed with an LC/CIS. CT with WL/AFB detected 19 cases (95%), whereas CT alone detected 15 cases (75%). Conclusion: Bimodality surveillance with spiral CT and WL/AFB can improve the detection of early stage LCs among high-risk

Relevance of Chest CT Scan Requests in Two University Teaching Hospitals in a Developing Country

Chest investigation is common in hospital practice. Chest X-ray is readily available and usually the first chest investigation. Thoracic CT scan constitutes an alternative and complimentary chest investigation. It is currently the most efficient investigation for the chest and its contents. Objectives: To evaluate the relevance of chest CT Scan requests in two university teaching hospitals in Cameroon. Material and Methods: We conducted a cross-sectional, retrospective and descriptive study at the Radiology and imaging units of the Yaounde Central Hospital and the Yaounde University Teaching Hospital Centre. Included in our study were files of patients who had a chest CT scan investigation during three years. Results: We had a study population of 323 subjects. The age interval was 23 months to 91 years old. Pulmonologist were the most prescribers with 27.2%. We had 80% conformity of indications with French Society of Radiology (FSR) standards. 50 over of 323 indications were not recommended by the FSR. Conclusion: There is a conformity rate of 80% between indications and the FSR recommendations.

Porosity Estimation from High Resolution CT SCAN Images of Rock Samples by Using Housfield Unit

Computer Automated Tomography has been shown to be a valuable tool in production research because it provides a non-destructive method to identify and evaluate the internal structural characteristics of reservoir rock. In CT scan, Hounsfield Unit (HU) is proportional to the degree of X-ray attenuation by the tissue. The aim of the present study was to introduce the method to estimate porosity which is one of physical parameters of reservoir rock though HU data. In this study, an Image J software was used to extract Hounsfield Unit data and calibrate by standard material’s density. This method provides the ability of using CT Scanner in advanced reservoir characterization and flow test experiments.

Anatomic Variants of Sphenoid Sinuses and Adjacent Structures: A Study of 225 Skull CT Scans at CNHU-HKM in Benin, West Africa

Objective: This study aimed to describe anatomic variants of sphenoidal sinuses and adjacent structures. Methods: A retrospective and descriptive study was carried out at The National and University Teaching Hospital Hubert Koutoukou Maga (CNHU-HKM), of Cotonou in Benin from November 1st to December 31st. A review of CT scans skull was done for the subjects aged at least 16 years old. Anatomic variants of the sphenoid sinuses and adjacent structures have been investigated. Results: 225 CT scans of skull were analyzed. The sellar type was the most common type of pneumatization of sphenoid sinuses (74.7%). Pneumatization of anterior clinoid processes of greater and lesser wings of the sphenoid and of pterygoid processes was observed in 7.1%;4.6%;3.3% and 7.3%;respectively. Protrusion of carotid canals and optic canals, maxillary and vidian nerves were observed in 48.3%;13.1%;18% and 9.5%;respectively. Conclusion: Risky anatomic variants of the sphenoid sinuses and adjacent structures are also described by CT-scan among Beninese. Before any surgery and to avoid bad outcome, a precise approach of these risky anatomic variants must be carried out by using CT-scan.

An Assessment of Both Patients and Medical Staff Awareness of the Risks of Ionizing Radiation from CT Scan in Cameroon

Objectives: To assess the patients and health personnel’s level of awareness on risks related to ionizing radiation during CT scan. Materials and methods: Three questionnaires were addressed to patients, prescribing physicians, and the medical imaging staff for three hospitals respectively. This permitted us to assess their knowledge on the benefits and risks of the required medical exam, based on the dangers of being exposed to X-rays, especially induced-radiation cancer following the amount of X-rays received during a CT scan and the possibility of not receiving radiation as tools of diagnosis. Results: 150 patients, 84 referring doctors of CT scan tests and 60 medical imaging personnel were retained. For patients, only 7.1% received information on the benefits and risks of their exams, and 34.4% believed that x-rays were harmful to their health. For the prescribers, 46.7% took into account the benefits/risk ratio before prescribing a test and only 16.7% of the referring doctors have informed the patient of the risks related to X-ray. 90% of the medical imaging staff ensures that the required test is justified, and 50% informed the patient on the risks associated with their radiation exposure, and the increased risk of developing cancer. 65% of the imaging staff could not estimate the dose that the patient will receive during the medical test. 25% mentioned the dose received during the acquisition in the patient’s exam report. Conclusion: This study confirms that the referring doctors, the patients, and the radiologists have a low knowledge concerning the risks associated with radiation exposure during a CT scan assessment. We will therefore say that patients and prescribers are not aware of the doses of radiation on CT and their possible risks, even though there is a risk of developing cancer.