Tannin was extracted from different subspecies of Acacia nilotica,Acacia nilotica nilotica(Ann),Acacia nilotica tomentosa(Ant)and Acacia nilotica adansonii(Ana).The aim was to elucidate their structure and evaluate th...Tannin was extracted from different subspecies of Acacia nilotica,Acacia nilotica nilotica(Ann),Acacia nilotica tomentosa(Ant)and Acacia nilotica adansonii(Ana).The aim was to elucidate their structure and evaluate their reactivity as bioadhesives in the wood industry.The extracts were prepared by hot water extraction(90°C tem-perature).Their gel time with paraformaldehyde was used atfirst to compare their reactivity.The tannin contents and the percentage of total polyphenolic materials in different solutions of the extracts spray dried powder were determined by the hide powder method.Concentrated solutions(47%)were tested by both MALDI ToF,13CNMR.The thermomechanical analysis(TMA)was performed to evaluate their modulus of elasticity(MOE)at different pHs.The gel times of all the three tannin extracts showed that their reactivity and it was com-parable to other known procyanidin/prodelphinidin tannin extract types.Ana,Ann and Ant showed highest per-cent of total polyphenolic materials at 70%,64%,and 57%,respectively.The 13CNMR spectra showed that the three subspecies of condensed tannins were mainly constituted of procyanidins(PC)and prodelphinidins(PD)in slightly different ratios.Ann(56.5%PC and 43.4%PD),Ant(57%PC and 43%PD)and Ana(58%PC and 42%PD).MALDI–TOF spectra showed the presence offlavonoid monomers,and oligomers some of which linked to short carbohydrates monomers or dimers.TMA revealed that the three types of tannins had high MOE at their initial pH(5).展开更多
Extracts of plant origin,particularly tannins,are attracting growing interest for the sustainable development of materials in the industrial sector.The discovery of new tannins is therefore necessary.The aim of this w...Extracts of plant origin,particularly tannins,are attracting growing interest for the sustainable development of materials in the industrial sector.The discovery of new tannins is therefore necessary.The aim of this work was to contribute to the understanding of the properties of Paraberlinia bifoliolata tannin by Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectroscopy MALDI-TOF/MS and Carbon 13 Nuclear Magnetic Resonance(13C NMR).The chemical composition of tannin extracted from Paraberlinia bifoliolata bark was determined,as was the mechanical strength of the resin hardened with Acacia nilotica extracts.Yield by successive water extraction was 35%.MALDI-TOF/MS analysis revealed the presence of three new compounds in this tannin,previously unknown in this family of extracts.These are 3-hydroxyproline acid,N-methyl-4-hydroxypipecolic acid and N-methyl-5-dihydroxypipecolic acid.The identification of the above molecules means that this tannin can be used for industrial applications,as a resin in the manufacture of particleboard and in the formulation of green corrosion inhibitors.This information is reinforced by 13C NMR spectrometry,which indicates the presence of several polyflavonoid units,confirming the condensed nature of the tannin.Thermomechanical analysis of the resin formed by the purified tannin of Paraberlinia bifoliolata to which a vegetal biohardener has been added provided a Modulus of Elasticity(MOE)value of 4840 MPa at 150℃,confirming its possible use as a binder resin in the manufacture of wood panels as well as for the formulation of a corrosion inhibitor.展开更多
Using compounds modified by the isotopes carbon-13 and nitrogen-15 helps conduct research in various fields of science, such as medicine, pharmacology, pharmacokinetics, metabolism, agriculture, and others. In the cas...Using compounds modified by the isotopes carbon-13 and nitrogen-15 helps conduct research in various fields of science, such as medicine, pharmacology, pharmacokinetics, metabolism, agriculture, and others. In the case of the availability of reliable, express, and cheap methods, the area of their use will gradually expand. A determination of the atomic fraction of the isotopes carbon-13 and nitrogen-15 directly in glycine, leucine, isoleucine, and alanine is proposed;the modification concerns all centers or one or more identical carbon and nitrogen centers separately, as well as both isotopes at the same time. There are defined mass lines of the mass spectrum of each amino acid, through which the isotopic content of carbon and nitrogen is calculated. The processes that must be taken into account for the determination of the isotopic content are also established. Isotopic analysis of these compounds until now was carried out by transforming them into carbon oxide, dioxide, and molecular nitrogen, and determination of their content in individual centers was impossible.展开更多
Carbon-13 NMR has become a powerful technique in studying polymer structures. A lot of parameters which are important in elucidating polymer structure can be obtained through 13C NMR analysis. Moreover, statistical be...Carbon-13 NMR has become a powerful technique in studying polymer structures. A lot of parameters which are important in elucidating polymer structure can be obtained through 13C NMR analysis. Moreover, statistical behavior of monomer addition process can be inspected.展开更多
采用热重分析(TGA)和傅里叶红外光谱(FTIR)联用实验技术以及13 C核磁共振(13 C NMR)技术,详细研究了印尼油砂热解产气过程和油砂沥青质的化学结构变化。油砂热解产气的TG-FTIR分析显示,油砂热解过程可以分为水分蒸发段(0~150℃)、低温段...采用热重分析(TGA)和傅里叶红外光谱(FTIR)联用实验技术以及13 C核磁共振(13 C NMR)技术,详细研究了印尼油砂热解产气过程和油砂沥青质的化学结构变化。油砂热解产气的TG-FTIR分析显示,油砂热解过程可以分为水分蒸发段(0~150℃)、低温段(150~550℃)和高温段(550~800℃)3个阶段,油气的析出主要集中在低温段,样品失重量为21%;在低温段所得油气的主要红外吸收峰归属于亚甲基和次甲基的C—H伸缩振动以及甲基的C—H面内弯曲振动。采用13C NMR技术获得了不同终温下沥青质碳结构骨架参数,由此揭示出油砂热解过程中化学结构的变化规律。随着油砂热解温度升高,沥青质中芳香族碳数量略有增加,脂肪族碳数量减少,其中亚甲基碳数量大幅度减小,是产油的主要贡献者,但甲基碳数量变化不明显;脂链平均长度不断减小,从9.2下降到4.0;油潜力碳的比例由0.56下降到0.27;在热解末期即产油能力最低时,惰性碳的比例占到0.6。2种实验结果相互印证且吻合良好。展开更多
基金the fund provided by NAPATA program,jointly funded by France campus and the Ministry of Higher Education and Scientific research,SudanLab facilities provided by LERMAB which is supported by a grant of the French Agence Nationale de la Recherche(ANR)in the ambit of the laboratory of excellence(Labex)ARBRE is also aknowledged.
文摘Tannin was extracted from different subspecies of Acacia nilotica,Acacia nilotica nilotica(Ann),Acacia nilotica tomentosa(Ant)and Acacia nilotica adansonii(Ana).The aim was to elucidate their structure and evaluate their reactivity as bioadhesives in the wood industry.The extracts were prepared by hot water extraction(90°C tem-perature).Their gel time with paraformaldehyde was used atfirst to compare their reactivity.The tannin contents and the percentage of total polyphenolic materials in different solutions of the extracts spray dried powder were determined by the hide powder method.Concentrated solutions(47%)were tested by both MALDI ToF,13CNMR.The thermomechanical analysis(TMA)was performed to evaluate their modulus of elasticity(MOE)at different pHs.The gel times of all the three tannin extracts showed that their reactivity and it was com-parable to other known procyanidin/prodelphinidin tannin extract types.Ana,Ann and Ant showed highest per-cent of total polyphenolic materials at 70%,64%,and 57%,respectively.The 13CNMR spectra showed that the three subspecies of condensed tannins were mainly constituted of procyanidins(PC)and prodelphinidins(PD)in slightly different ratios.Ann(56.5%PC and 43.4%PD),Ant(57%PC and 43%PD)and Ana(58%PC and 42%PD).MALDI–TOF spectra showed the presence offlavonoid monomers,and oligomers some of which linked to short carbohydrates monomers or dimers.TMA revealed that the three types of tannins had high MOE at their initial pH(5).
基金supported by the Institut de la Francophonie pour le Developpement Durable(IFDD/Canada)/Projet de Deploiement des Technologies et Innovations Environnementales(PDTIE)funded by Organisation Internationale de la Francophonie(OIF)the Organisation of African,Caribbean and Pacific States and the European Union(EU)(FED/220/421-370)the Local Materials Promotion Authority(MIPROMALO)of the Ministry of Scientific Research and Innovation of Cameroon who made it possible for this scientific work to be carried out.
文摘Extracts of plant origin,particularly tannins,are attracting growing interest for the sustainable development of materials in the industrial sector.The discovery of new tannins is therefore necessary.The aim of this work was to contribute to the understanding of the properties of Paraberlinia bifoliolata tannin by Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectroscopy MALDI-TOF/MS and Carbon 13 Nuclear Magnetic Resonance(13C NMR).The chemical composition of tannin extracted from Paraberlinia bifoliolata bark was determined,as was the mechanical strength of the resin hardened with Acacia nilotica extracts.Yield by successive water extraction was 35%.MALDI-TOF/MS analysis revealed the presence of three new compounds in this tannin,previously unknown in this family of extracts.These are 3-hydroxyproline acid,N-methyl-4-hydroxypipecolic acid and N-methyl-5-dihydroxypipecolic acid.The identification of the above molecules means that this tannin can be used for industrial applications,as a resin in the manufacture of particleboard and in the formulation of green corrosion inhibitors.This information is reinforced by 13C NMR spectrometry,which indicates the presence of several polyflavonoid units,confirming the condensed nature of the tannin.Thermomechanical analysis of the resin formed by the purified tannin of Paraberlinia bifoliolata to which a vegetal biohardener has been added provided a Modulus of Elasticity(MOE)value of 4840 MPa at 150℃,confirming its possible use as a binder resin in the manufacture of wood panels as well as for the formulation of a corrosion inhibitor.
文摘Using compounds modified by the isotopes carbon-13 and nitrogen-15 helps conduct research in various fields of science, such as medicine, pharmacology, pharmacokinetics, metabolism, agriculture, and others. In the case of the availability of reliable, express, and cheap methods, the area of their use will gradually expand. A determination of the atomic fraction of the isotopes carbon-13 and nitrogen-15 directly in glycine, leucine, isoleucine, and alanine is proposed;the modification concerns all centers or one or more identical carbon and nitrogen centers separately, as well as both isotopes at the same time. There are defined mass lines of the mass spectrum of each amino acid, through which the isotopic content of carbon and nitrogen is calculated. The processes that must be taken into account for the determination of the isotopic content are also established. Isotopic analysis of these compounds until now was carried out by transforming them into carbon oxide, dioxide, and molecular nitrogen, and determination of their content in individual centers was impossible.
文摘Carbon-13 NMR has become a powerful technique in studying polymer structures. A lot of parameters which are important in elucidating polymer structure can be obtained through 13C NMR analysis. Moreover, statistical behavior of monomer addition process can be inspected.
文摘采用热重分析(TGA)和傅里叶红外光谱(FTIR)联用实验技术以及13 C核磁共振(13 C NMR)技术,详细研究了印尼油砂热解产气过程和油砂沥青质的化学结构变化。油砂热解产气的TG-FTIR分析显示,油砂热解过程可以分为水分蒸发段(0~150℃)、低温段(150~550℃)和高温段(550~800℃)3个阶段,油气的析出主要集中在低温段,样品失重量为21%;在低温段所得油气的主要红外吸收峰归属于亚甲基和次甲基的C—H伸缩振动以及甲基的C—H面内弯曲振动。采用13C NMR技术获得了不同终温下沥青质碳结构骨架参数,由此揭示出油砂热解过程中化学结构的变化规律。随着油砂热解温度升高,沥青质中芳香族碳数量略有增加,脂肪族碳数量减少,其中亚甲基碳数量大幅度减小,是产油的主要贡献者,但甲基碳数量变化不明显;脂链平均长度不断减小,从9.2下降到4.0;油潜力碳的比例由0.56下降到0.27;在热解末期即产油能力最低时,惰性碳的比例占到0.6。2种实验结果相互印证且吻合良好。
