A green cross-linking method for the preparation of renewable threedimensional graphene sponges for efficient adsorption of Congo red dye

Graphene-based materials possess significant potential for the treatment of dye wastewater due to their exceptional adsorption properties toward stubborn pollutants.However,their utilization is hindered by high preparation costs,low yields,environmental pollution during synthesis,and challenges in regenerating the adsorbent.This study proposes a novel approach to address these limitations by developing nitrogen-doped three-dimensional(3D)polyvinyl alcohol(PVA)crosslinked graphene sponges(N-PGA)using a cross-linking method with ammonium carbonate.This method offers a relatively mild,environmentally friendly approach.Ammonium carbonate serves as both a reducing and modifying agent,facilitating the formation of the intrinsic structure of N-PGA and acting as a nitrogen source.Meanwhile,PVA is utilized as the cross-linking agent.The results demonstrate that N-PGA exhibits a favorable internal 3D hierarchical porous structure and possesses robust mechanical properties.The measured specific surface area(BET)of N-PGA was as high as406.538 m^(2)·g^(-1),which was favorable for its efficient adsorption of Congo red(CR)dye molecules.At an initial concentration of 50 mg·L^(-1),N-PGA achieved an impressive removal rate of 89.6%and an adsorption capacity of 112 mg·g^(-1)for CR dye.Furthermore,it retained 79%of its initial adsorption capacity after 10 cycles,demonstrating excellent regeneration performance.In summary,the synthesized N-PGA displays remarkable efficacy in the adsorption of CR dye in wastewater,opening up new possibilities for utilizing 3D porous graphene nanomaterials as efficient adsorbents in wastewater treatment.

A Novel Adsorbent Prepared by Aluminum-Containing Waste Residue and Its Application for Congo Red Wastewater Decolorization

Modified aluminum slag (MAS) was applied as an adsorbent for Congo red (CR) prepared by the hydrothermal treatment of Ca(OH)2. At 25°C, with a MAS dosage of 0.3 g, initial CR concentration of 100 mg/L and initial pH = 5, and the adsorption time was 40 min, the CR removal efficiency was 98.41%. The adsorption trend of CR conformed to the second-order kinetics, and the adsorption isotherm follows the Freundlich isotherm model. Compared with RAS, MAS has a larger pore volume and specific surface area. The mechanism of action of MAS on CR was the interaction between membrane diffusion and internal diffusion, and the adsorption rate during the membrane diffusion was the fastest.

Preparation and characterization of MWCNTs/LDHs nanohybrids for removal of Congo red from aqueous solution

The assembly of layered double hydroxides （LDHs） and multi-walled carbon nanotubes （MWCNTs） nanohybrids was prepared as MWCNTs/LDHs by co-precipitation. The synthesized nanoparticles were characterized by using XRD, FT-IR, SEM/EDX, TGA and BET. XRD and SEM studies proved that MWCNTs phases did not enter into the interlayers of LDHs, they dispersed over the LDHs surface homogeneously. BET results showed that MWCNTs/LDHs possessed hierarchically porous nanostructure with large surface area （124.974 m^2/g） and great pore volume （0.604 cm^3/g）. Batch experiments were conducted to study the adsorption efficiency of Congo red （CR）. It was worthy to note that MWCNTs/LDHs exhibited excellent adsorption performance with the maximum CR adsorption capacity of 595.8 mg/g in weak acidic environment. The adsorption kinetics and isotherm parameters can be well described by the pseudo-second-order and the Langmuir isotherm models, respectively. The thermodynamic studies indicated that the adsorption process was spontaneous and endothermic.

Adsorption of congo red on mesoporous activated carbon prepared by CO2 physical activation

This research demonstrates the production of mesoporous activated carbon from sargassum fusiforme via physical activation with carbon dioxide.Central composite design was applied to conduct the experiments at different levels by altering three operating parameters.Activation temperature(766-934℃),CO2 flow rate(0.8-2.8 L·min^-1)and activation time(5-55 min)were the variables examined in this study.The effect of parameters on the specific surface area,total pore volume and burn-out rate of activated carbon was studied,and the influential parameters of methylene blue adsorption value were identified employing analysis of variance.The optimum conditions for maximum methylene blue adsorption value were:activation temperature=900℃,activation time=29.05 min and CO2 flow rate=1.8 L·min(-1).The activated carbon produced under optimum conditions was characterized by BET,FTIR and SEM.The adsorption behavior on congo red was studied.The effect of parameters on the adsorbent dosage,temperature,PH and initial congo red concentration was investigated.The adsorption properties of the activated carbon were investigated by kinetics.The equilibrium removal rate and maximum adsorption capacity reaches up to 94.72%,234 mg·g^-1,respectively when initial congo red concentration is 200 mg·L^-1 under adsorbent dosage(0.8 g·L^-1),temperature(30℃),PH7.

Discoloration of Congo Red by Rod-Plate Dielectric Barrier Discharge Processes at Atmospheric Pressure

A dielectric barrier discharge （DBD） reactor with a rod-plate electrode configuration was used for the oxidative decomposition of Congo red dye in an aqueous solution. Plasma was generated in the gas space above the water interface under atmospheric pressure. Discharge characteristics were analyzed by voltage-current waveforms. Effects of applied voltage, initial conductivity, and initial concentration were also analyzed. Congo red discoloration increased with increased applied voltage and decreased conductivity. The initial conductivity significantly influenced the Congo red discoloration. Under the same conditions, the highest discoloration rate was obtained at 25 mg/L. The presence of ferrous ions in the solutions had a substantial positive effect on Fenton dye degradation and flocculation. At an applied voltage of 20 kV, about 100% of dye was degraded after 4 min of Fe^2＋/DBD treatment. Results showed that adding a certain dosage of hydrogen peroxide to the wastewater could enhance the discoloration rate. Possible pathways of Congo red discoloration by DBD plasma were proposed based on GC/MS, FTIR, and UV-vis spectroscopy analyses.

Radio Frequency Underwater Discharge Operation and Its Application to Congo Red Degradation

Radio frequency （RF） underwater discharge operation was performed for different liquid conductivities driven by different frequencies ranging from 13.56 MHz to 60 MHz, and its application to organic degradation was investigated. The RF underwater discharge was observed to be generated within the bubble at electrode surface formed by RF and plasma heating. It was shown that the sizes of the bubbles and plasmas increased as the driving frequency and the input power went up. The breakdown voltage decreased rapidly with the increase of the water conductivity and driving frequency. Comparative experiments of the UV-VIS absorbance spectra of Congo Red solution before and after discharge suggested effective degradation of the organic dye due to the active species generated during the discharge, such as .OH, .O, .H, etc. revealed by optical emission spectroscopy. The results show that higher exciting frequency and lower conduc- tivity of the solution are more effective for organic degradation. With the combination of Fourier Transform Infrared Spectroscopy （FT-IR） and Liquid Chromatography-Mass Spectrometry （LC- MS） data, one possible degradation process was proposed and the main conceivable components and structures of the products were also presented.

Hierarchical porous MgBO_2(OH) microspheres: Hydrothermal synthesis,thermal decomposition, and application as adsorbents for Congo red removal

A facile eco-friendly hydrothermal route （180 ℃, 12.0 h） has been developed for the first time to the uniform hierarchical porous MgBO2（OH） microspheres without the aid of any organic additive, surfactant or template, by using the abundant MgCl2·6H2O, H3BO3 and NaOH as the raw materials. The as-obtained porous microspheres exhibit a specific surface area of 94.752 mg·g-1, pore volume of 0.814 cm3.g-1, and ca. 84.0% of which have a diameter of 2.25-3.40 μm. The thermal decomposition of the porous MgBO2（OH） microspheres （650 ℃, 2.5 ℃. min-l） leads to the porous Mg2B2O5 rnicrospheres with well-retained morphology. When utilized as the adsorbents for the removal of CR from mimic waste water, the present porous MgBO2（OH） microspheres exhibit satisfactory adsorption capacity, with the maximum adsorption capacity qm of 309.1 mg-g-1, much higher than that derived from most of the referenced adsorbents. This opens a new window for the facile green hydrothermal synthesis of the hierarchical porous MgBO2（OH） microspheres, and extends the potential application of the 3D hierarchical porous metal borates as high-efficiency adsorbents for organic dyes removal.

One-step hydrothermal synthesis of Sn-doped α-Fe_(2)O_(3) nanoparticles for enhanced photocatalytic degradation of Congo red

We report on the synthesis of Sn-doped hematite nanoparticles(Sn-α-Fe_(2)O_(3) NPs)by the hydrothermal method.The prepared Sn-α-Fe_(2)O_(3) NPs had a highly pure and well crystalline rhombohedral phase with an average particle size of 41.4 nm.The optical properties of as-synthesizedα-Fe_(2)O_(3) NPs show a higher bandgap energy(2.40-2.57 eV)than that of pure bulkα-Fe_(2)O_(3)(2.1 eV).By doping Sn intoα-Fe_(2)O_(3) NPs,the Sn-doped hematite was observed a redshift toward a long wavelength with in-creasing Sn concentration from 0%to 4.0%.The photocatalytic activity of Sn-dopedα-Fe_(2)O_(3) NPs was evaluated by Congo red(CR)dye degradation.The degradation efficiency of CR dye using Sn-α-Fe_(2)O_(3) NPs catalyst is higher than that of pureα-Fe_(2)O_(3) NPs.The highest degradation efficiency of CR dye was 97.8%using 2.5%Sn-dopedα-Fe_(2)O_(3) NPs catalyst under visible-light irradi-ation.These results suggest that the synthesized Sn-dopedα-Fe_(2)O_(3) nanoparticles might be a suitable approach to develop a photocatalytic degradation of toxic inorganic dye in wastewater.

Synthesis and characterization of carboxymethyl cellulose/organic montmorillonite nanocomposites and its adsorption behavior for Congo Red dye

A series of carboxymethyl cellulose/organic montmorillonite （CMC/OMMT） nanocomposites with different weight ratios of carboxymethyl cellulose （CMC） to organic montmorillonite （OMMT） were synthesized under different conditions. The nanocomposites were characterized by the Fourier transform infrared （FT-IR） spectrophotometer, X-ray diffraction （XRD） method, transmission electron microscope （TEM）, scanning electron microscope （SEM）, and thermal gravimetric （TG） analysis. The results showed that the introduction of CMC may have different influences on the physico-chemical properties of OMMT and intercalated-exfoliated nanostructures were formed in the nanocomposites. The effects of different reaction conditions on the adsorption capacity of samples for Congo Red （CR） dye were investigated by controlling the amount ofhexadecyl trimethyl ammonium bromide （CTAB）, the weight ratio of CMC to OMMT, the reaction time, and the reaction temperature. Results from the adsorption experiment showed that the adsorption capacity of the nanocomposites can reach 171.37 rag/g, with the amount of CTAB being 1.0 cation exchange capacity （CEC） of MMT, the weight ratio of CMC to OMMT being l：l, the reaction time being 6 h, and the reaction temperature being 60~C. The CMC/OMMT nanocomposite can be used as a potential adsorbent to remove CR dye from an aqueous solution.

An efficient and comparative adsorption of Congo red and Trypan blue dyes on MgO nanoparticles: Kinetics, thermodynamics and isotherm studies

Cubic phase of Mg O nanoparticles were prepared by microwave-assisted combustion synthesis and investigated for the removal of toxic dyes like Congo Red(CR)and Trypan blue(TB).The crystallite size of the Mg O nanoparticle was calculated to be 18 nm from XRD pattern.The sample was further characterized by FTIR,TGA and FESEM techniques.The dyes were subjected to prototypical batch adsorption process,including investigation of different parameters like Mg O dosage,dye concentration,solution pH,agitation speed and temperature.It was found that,0.2 g of Mg O NPs showed maximum removal efficiency for both the dyes(more than 98%),having 25 ppm of dye concentration at an acidic p H(3–4).The maximum loading capacity of Mg O NPs was obtained to be 136 mg/g and 132 mg/g for CR and TB,respectively.Different thermodynamic parameters like△G^(0),△H^(0)and△S^(0)were measured.The negative△H^(0)and the positive△S^(0)values for both the dyes correspond to an exothermic process and an increase in randomness of the adsorbent and dye.The isotherm analysis exhibited that the Freundlich model fits better to the experimental equilibrium data,suggesting heterogeneous surface of the nanoparticles.Whereas,the kinetic data revealed a pseudo 2 nd order rate for adsorption process.

Vermicompost for Indigo Blue and Congo Red Removal

The data obtained through this work revealed that the vermicompost is a natural adsorbent able to removal two textile dyes from an aqueous medium. The values of maximum adsorption capacity for congo red (23.25 mg/g) and indigo blue (40.39 mg/g) obtained from the Mathematical Langmuir Model reveal it. The conditions of adsorbent mass, stirring time between adsorbent and dyes were optimized. Additionally, the values of Gibbs free energy demonstrate the predominance of physical interaction between both dyes and vermicompost. Through Langmuir constant values, it was possible to identify similar affinities between both dyes and vermicompost. The value of dimensionless constant indicates favorable adsorptions process. Finally, through physicochemical analysis from scanning electron microscopy and Fourier Transform Infra-Red Spectroscopy, the characteristics of vermicompost were verified revealing essential aspects to efficient adsorbent.

Design, Microwave Assisted Synthesis of Some Schiff Bases Derivatives of Congo Red and Conventional Preparation of Their Structurally Reversed Analogous Compounds

This work contributes to the improvement of the azo group which has outstanding electron donating capability and serves as excellent ligands in the field of coordination chemistry. The authors of this research deal with the microwave irradiation synthesis of some new Schiff bases derived from the biologically effective and photoactive Congo red [Ia-g]. The design and preparation of the structurally reversed analogous compounds to the above compounds [IIIa-d] were accomplished using the conventional chemical methods by keeping the benzidine moiety of Congo red as the nucleus of the synthesized compounds, doubling the number of the azo groups and inverting the way of their conjugation order with the azomethine groups. The structures of the newly prepared compounds were established on the basis of their FTIR and H1 NMR spectral data.

Biodegradation of Congo Red Azo Dye by Aspergillus spp, Isolated from Dye Contaminated Soils

In the present study, it has been aimed to determine the non target effects of Congo red on soil enzyme activities namely amylase, protease, catalase, glucose oxidase and laccases, following the standard procedures. Further, it is also aimed to decolourize the dye effluents by using immobilized fimgal cultures namely Aspergillus spp. isolated from textile effluents and estimate the percentage of decolourization by dye decolourization assay method. The selected fungi were found efficient and dominant type in dye decolourization with the production of laccase and other enzymes. Except laccase, all the enzymes showed maximum activity at 14 days followed by declining trend at 21 days. Maximum enzyme activity was noticed with Aspergillus niger. 95% of decolourization was found within 4-24 h in sodium alginate immobilized fungal cultures compared to controls. The above results clearly indicate the efficiency of these fungi in selective bioremediation of dye contaminated sites.

Adsorption of Congo Red onto Lignocellulose/Montmorillonite Nanocomposite

Lignocellulose/montmorillonite （LNC/MMT） nanocomposites were prepared and characterized by FTIR and XRD. The adsorption of congo red （CR） on LNC/MMT nanocomposite was studied in detail. The effects of contact temperature, pH value of the dye solutions, contact time and concentration of dye solutions on the adsorption capacities of lignocellulose （LNC）, montmorillonite （MMT） and the nanocomposite were investigated. The adsorption kinetics and isotherms and adsorption thermodynamics of the nanocomposite for CR were also studied. The results show that the adsorption capacity of LNC/MMT nanocomosite is higher than that of LNC and MMT. All the adsorption processes fit very well with the pseudo-second-order and the Langmuir equation. From thermodynamic studies, it is seen that the adsorption is spontaneous and endothermic.

Roughness Control of Layer-by-Layer and Alternative Spray Films from Congo Red and PAH via Laser Light Irradiation

Films from congo red (CR) alternated with poly(allylamine hydrochloride), PAH, were prepared by layer-by-layer and alternative spray techniques. In order to investigate the change of roughness induced by laser light irradiation (532 nm), both kinds of films were characterized by using UV-visible spectroscopy and atomic force microscopy (AFM). At dif- ferent irradiation times, layer-by-layer, LbL, films showed small changes in the roughness and irregular behavior, whereas spray films exhibited higher and a regular decreasing of roughness with increasing irradiation time. The higher roughness of spray films as compared with the LbL ones was attributed to different formation mechanisms of the films. The decreasing of the roughness as a function of the irradiation time (exhibited by the spray films) was associated to surface relaxation due to the interplay between photoisomerization of congo red dye and the heating of the sample during the laser light irradiation. The results suggested that the alternative spray technique is the best choose to control of roughness of the films by using light irradiation.

Preparation and Characterization of Mg/Al/Fe Hydrotalcite with Superb Absorption Capacity toward Congo Red

Mg/Al/Fe layered double hydroxide(MAF-LDH1) was prepared by solvothermal method with the sodium dodecyl sulfate as the template, and the ethanol system was benefit to growth of sample. The nature in the resulting MAF-LDH was investigated by X-ray diffraction, field emission scanning electron microscopy, Fourier transformed infrared spectra, thermogravimetric analysis, and N2 adsorption-desorption.The morphology of MAF-LDH1 is petal-like with the size of 400-500 nm and the thickness about 10-20 nm. The adsorption performance of the samples was evaluated by absorption of the Congo red(CR) solutions. Compared with Mg/Al layered double hydroxide(MA-LDH), the maximum adsorption capacities of the MAF-LDH1 samples were 943.4 mg/g which was greatly enhanced. Furthermore, after seven cycling tests, the adsorption performance was still up to 90%. Theoretical calculation results revealed that the adsorption process was spontaneous and followed the pseudo-second-order kinetic model and Freundlich model. This work provides a promising alternative strategy to enhance the adsorptive properties of hydrotalcite-like materials.

Disposal of wastewater containing Congo Red by synthesizing layer double hydroxide in-situ

Based on the principle of synthesis, a new method was put forward to dispose Congo Red anion-containing dyestuff from wastewater and its feasibility was also examined. The principle of the method is described as follows: Mg2+ and Al3+ are hydrolyzed to form Mg/Al-LDH by adding Mg2+, Al3+ and NaOH in wastewater containing anion dyestuff, which is selectively intercalated with the interlayer of LDH in order to balance positive structural charge. While Mg2+ and Al3+ are co-precipitated to form LDH, the anion dyestuff in wastewater will be removed by LDH synthesized in-situ, as is confirmed by X-ray diffraction analysis of settlings and chemical analysis of aqueous samples. In this work, we studied the influence of Mg/Al mole ratio, pH value, time and temperature of reaction on the removal of anion dyestuff and the use of Mg and Al. The experimental results showed the maximum removal efficiency of anion dyestuff could be attained when pH value was 9.0, and Mg/Al mol ratio was 2∶1, reaction duration was 2 hours, and the effect of temperature was not remarkable, and the removal efficiency could reach 100%. Meanwhile, the Mg and Al added could be made good use of. This technology has the advantage of extraordinary efficiency of wastewater disposal.

Comparative Isotherms Studies on Adsorptive Removal of Congo Red from Wastewater by Watermelon Rinds and Neem-Tree Leaves

Equilibrium adsorption studies for detoxification of Congo Red (CR) dye from single component model wastewater by powdered watermelon rinds and neem leaves adsorbents were carried out with the view to test the applicability of the adsorption process to Langmuir, Freundlich, Temkin, Dubinin-Radushkevich and Harkins-Jura isotherm models. The values of correlation coefficient, R2 (0.9359 - 0.9998), showed that all the experimental data fitted the linear plots of the tested isotherm models. Dubinin-Radushkevich’s monolayer maximum adsorption capacity qD (20.72 - 26.06 mg/g) is better than Langmuir’s qm (18.62 - 24.75 mg/g) for both adsorbents with the capacities higher for adsorption on watermelon rind than on neem leaves. Values of Langmuir separation factor (RL) suggest unfavourable adsorption processes (i.e. chemisorption) of the dye on both the adsorbents, while Freundlich constant (nF) indicates unfavourable process only for CR adsorption onto neem leaves. The Dubinin-Radushkevich’s mean free energy of adsorption, E (0.29 - 0.32 kJ/mol), suggests physical adsorption processes. Values for Temkin’s heat of adsorption, bT (-0.95 to 0.74 kJ/mol), also show physical adsorption process.

Facile Synthesis and Characterization of Nanoporous NiO with Folic Acid as Photodegredation Catalyst for Congo Red

In this study nanoporous NiO was prepared using Ni(CH3COO)2,4H2O, folic acid and water as starting material, template and solvent respectively, by sol gel method followed by calcination at 400℃. The solid product was characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM) Fourier transform infrared (FT-IR) and photoluminescence (PL) techniques. The particle size of the nanoparticles estimated by XRD was in good agreement with the particle size obtained by TEM analysis (4-5nm). It was also found that the prepared nanoporous NiO show very good activity for photodegredation of dye organic pollutants such as Congo red (91%) during 1.5 hours.

Adsorption of Congo Red from Aqueous Solution Using CTAB-Kaolin from Bechar Algeria

Cetyltrimethylammonium bromide-modified kaolin (CTAB-kaolin or KC) was prepared and tested as an adsorbent for an anionic dye Congo red (CR) removal from aqueous solution in comparison with natural kaolin (K). The effect of various experimental parameters was investigated using a batch adsorption technique. In this manner, the adsorption isotherms and adsorption kinetics of CR on K and KC were examined. The isothermal data could be well described by the Langmuir equation and the dynamical data fit well with the pseudo-second-order kinetic model. The adsorption capacity of modified kaolin KC (24.46 mg/g) was found to be around 4 times higher than that of natural kaolin K (5.94 mg/g). The KC demonstrated the highest adsorption capacity by removing over 98% of CR after ten minutes of contact. These results indicate that CTAB-kaolin could be employed as low-cost alternative to activated carbon in wastewater treatment for the removal of colour which comes from industrial effluents of textile activities, tanning or printing.