Correlation Models for Light Olefin Yields from Catalytic Pyrolysis of Petroleum Residue

Correlation models for light olefin yields from residue catalytic pyrolysis are studied. Experiments are carried out in a confined fluidized bed reactor for Daqing (China) atmospheric residue catalytic pyrolysis over LCM-5 pyrolyzing catalyst. The influences of reaction temperature, residence time and the weight ratios of catalyst-to-oil and steam-to-oil on light olefin yields are researched. Correlation models for light olefin yields are established, and the model parameters obtained, with the least square method. Results for error analysis and the F-statistical test show that the correlation models have high calculation precision.

Measurement and correlation of solubility of 9-fluorenone in 11 pure organic solvents from T = 283.15 to 323.15 K

In this work, the solubility data of 9-fluorenone in 11 pure solvents(methanol, ethanol, n-propanol, isopropanol, n-butanol, iso-butanol, acetonitrile, ethyl formate, ethyl acetate, dimethyl sulfoxide, n-hexane)were measured by the gravimetric method from 278.15 K to 318.15 K under atmospheric pressure. The results showed that the solubility of 9-fluorenone in all tested solvents increased with the raised temperature. The solubility data were correlated by the modified Apelblat equation, λh model and NRTL(nonradom two fluid) model. The average relative deviation(ARD) correlated by three thermodynamic models in different solvents was all below 5%, which indicated that the three thermodynamic models fit the solubility data well. Furthermore, the mixing thermodynamic properties of 9-fluorenone in pure solvent systems were calculated via NRTL model. The results indicated the dissolution process of 9-fluorenone is spontaneous and entropically favorable. The solubility and the mixing thermodynamic properties provided in this paper would play an important role in industrial manufacture and follow-up operation of 9-fluorenone.

Solubility of iron(Ⅲ) and nickel(Ⅱ) acetylacetonates in supercritical carbon dioxide

As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates have shown great potential for the preparation of single-atom catalytic materials.In this study,the solubilities of iron(Ⅲ)acetylacetonate(Fe(acac)3)and nickel(Ⅱ)acetylacetonate(Ni(acac)2)were measured at the temperature from 313.15 to 333.15 K and in the pressure range of 9.5–25.2 MPa to accumulate new solubility data.Solubility was measured using a static weight loss method.The semi-empirical models proposed by Chrastil and Sung et al.were used to correlate the solubility data of Fe(acac)3 and Ni(acac)2.The equations obtained can be used to predict the solubility of the same system in the experimental range.

Measurement and correlation of solid-liquid equilibrium data for nitroguanidine in water and organic solvents from 298.15K to 338.15K

Nitroguanidine（NQ） isa high energy and low sensitivity explosive and solid-liquid equilibrium data are significant for study on crystallization of NQ. The solubilities of NQ in water, dimethyl sulfoxide, N, N dimethylformamide, 1,4 butyrolaetone and dimethyl sulfoxide @ water, N, N dimethylformamide ＋ water were measured by dynamic laser monitoring within a temperature range from 298. 15 K to 338. 15 K. The experimental data were correlated by modified Apelblat equation, 2h equation, CNIBS/R K model, andJouyban-Acree model. The results show that the four thermodynamic models can all be used to predict solubility with high accuracy. Accrding to the Akaike＇s information criterion （AIC）, the better models for correlating the solubility of NQ are judged. Additionally, the dissolution enthalpy, entropy and Gibbs free energy were calculated by the van＇t Hoff equation.

Study on Model of Correlation Between Chemical Ele－ment Contents in Tree Rings and Soils near Tree Roots

The chemical element contents in tree rings are correlated with those in the soils near the tree roots. Theresults in the present study showed that the correlation between them could be described using the followinglogarithmic linear correlation model:lgC'(Z) = α(Z) + b(Z)lgC(Z).Therefore, by determining the chrono-sequence C(Z, t), where Z is the atomic number and t the year ofelemental contents in the annual growth rings of trees, we could get the chrono-sequence C'(Z, t) of elementalcontents in the soil, thus inferring the dynamic variations of relevant elemental contents in the soil.

MIP Technology for Pruduction of Euro Ⅳ Clean Gasoline Ⅱ. Correlation Model of Sulfur Content of MIP Naphtha and Its Application

On the basis of the reaction rules and its influencing factors of sulfur compounds in MIP naphtha, a correlation model for describing the correlation between mass fraction of sulfur in MIP naphtha, mass fraction of sulfur in feedstock and volume fraction of olefin in naphtha was developed and the model＇s parameters were estimated. The residual error distribution and statistical study showed that the developed model was reasonable and reliable and able to predict the mass fraction of sulfur compounds in naphtha. The correlation model can provide theoretical guidance and operation base for adjusting process parameters to produce EURO IV gasoline by the MIP units. The model was validated by its application on the MIP unit of Qingdao Refining ＆ Chemical Company. On this unit, the tail oil with low sulfur content obtained via hydrotreating gas oil was used as the feedstock and the olefin content of naphtha was reduced by promoting hydrogen transfer reaction through adjustment of process parameters. Thus, EURO IV clean gasoline was manufactured by this MIP unit.

Explicit Correlation Model of Multi-source Constraints for Re-design Parts with Complex Curved Surface

In precision machining of complex curved surface parts with high performance, geometry accuracy is not the only constraint, but the performance should also be met. Performance of this kind of parts is closely related to the geometrical and physical parameters, so the final actual size and shape are affected by multiple source constraints, such as geometry, physics, and performance. These parts are rather difficult to be manufactured and new manufacturing method according to performance requirement is urgently needed. Based on performance and manufacturing requirements for complex curved surface parts, a new classification method is proposed, which divided the complex curved surface parts into two categories： surface re-design complex curved surface parts with multi-source constraints（PRCS） and surface unique complex curved surface parts with pure geometric constraints（PUCS）. A correlation model is constructed between the performance and multi-source constraints for PRCS, which reveals the correlation between the performance and multi-source constraints. A re-design method is also developed. Through solving the correlation model of the typical paws performance-associated surface, the mapping relation between the performance-associated surface and the related removal amount is obtained. The explicit correlation model and the method for the corresponding related removal amount of the performance-associated surface are built based on the classification of surface re-design complex curved surface parts with multi-source constraints. Research results have been used in the actual processing of the typical parts such as radome, common bottom components, nozzle, et al., which shows improved efficiency and accuracy of the precision machining for the surface re-design parts with complex curved surface.

LES prediction of space-time correlations in turbulent shear flows

We compare the space-time correlations calculated from direct numerical simulation （DNS） and large-eddy simulation （LES） of turbulent channel flows. It is found from the comparisons that the LES with an eddy-viscosity subgrid scale （SGS） model over-predicts the space-time corre- lations than the DNS. The overpredictions are further quantified by the integral scales of directional correlations and convection velocities. A physical argument for the overpre- diction is provided that the eddy-viscosity SGS model alone does not includes the backscatter effects although it correctly represents the energy dissipations of SGS motions. This argument is confirmed by the recently developed elliptic model for space-time correlations in turbulent shear flows. It suggests that enstrophy is crucial to the LES prediction of spacetime correlations. The random forcing models and stochastic SGS models are proposed to overcome the overpredictions on space-time correlations.

Cluster modeling of the short-range correlation of acoustically emitted scattering signals

As a widely used measurement technique in rock mechanics,spatial correlation modeling of acoustic emission(AE)scattering signals is attracting increasing focus for describing mechanical behavior quantitatively.Unlike the statistical description of the spatial distribution of randomly generated AE signals,spatial correlation modeling is based mainly on short-range correlation considering the interrelationship of adjacent signals.As a new idea from percolation models,the covering strategy is used to build the most representative cube cluster,which corresponds to the critical scale at peak stress.Its modeling process of critical cube cluster depends strongly on the full connection of the main fracture network,and the corresponding cube for coverage is termed the critical cube.The criticality pertains to not only the transition of local-to-whole connection of the fracture network but also the increasing-to-decreasing transition of the deviatoric stress with an obvious stress drop in the brittle failure of granite.Determining a reasonable critical cube guarantees the best observation scale for investigating the failure process.Besides,the topological connection induces the geometric criticality of three descriptors,namely anisotropy,pore fraction,and specific surface area,which are evaluated separately and effectively.The results show that cluster modeling based on the critical cube is effective and has criticality in both topology and geometry,as well as the triaxial behavior.Furthermore,the critical cube length presents a high confidence probability of being correlated to the mineral particle size.Besides,its pore fraction of cube cluster is influenced strongly by the critical cube length and confining pressure.

Research on the Correlation Between Physical Examination Indexes and TCM Constitutions Using the RBF Neural Network

Objective To establish correlation models between various physical examination indexes and traditional Chinese medicine(TCM)constitutions,and explore their relationships based on the radial basis function(RBF)neural network.Methods The raw data of physical examination indexes and TMC constitutions of 650 subjects who underwent a physical examination were cleaned,classified and sorted,on the basis of which valid data were retrieved and categorized into a training dataset and a test dataset.Subsequently,the RBF neural network was applied to the valid samples in the training set to establish correlation models between various physical examination indexes and TCM constitutions.The accuracy and the error margin of the correlation model were then verified using the valid samples in the test set.Results Of all selected samples,the highest accuracy rates were 80% for the blood lipid index-TCM constitution model;100% for the renal function index-TCM constitution model;100% for the blood routine(male)index-TCM constitution model;88.8% for the blood routine(female)index-TCM constitution model;84.1%for the urine routine index-TCM constitution model;and 100% for the blood transfusion index-TCM constitution model.Conclusions The samples selected in this study suggested that there is a strong correlation between physical examination indexes and TCM constitutions,making it feasible to apply the established correlation models to TCM constitution identification.

A WYNER-ZIV VIDEO CODING METHOD UTILIZING MIXTURE CORRELATION NOISE MODEL

In Wyner-Ziv (WZ) Distributed Video Coding (DVC), correlation noise model is often used to describe the error distribution between WZ frame and the side information. The accuracy of the model can influence the performance of the video coder directly. A mixture correlation noise model in Discrete Cosine Transform (DCT) domain for WZ video coding is established in this paper. Different correlation noise estimation method is used for direct current and alternating current coefficients. Parameter estimation method based on expectation maximization algorithm is used to estimate the Laplace distribution center of direct current frequency band and Mixture Laplace-Uniform Distribution Model (MLUDM) is established for alternating current coefficients. Experimental results suggest that the proposed mixture correlation noise model can describe the heavy tail and sudden change of the noise accurately at high rate and make significant improvement on the coding efficiency compared with the noise model presented by DIStributed COding for Video sERvices (DISCOVER).

Constitution Identification System for Traditional Chinese Medicine (TCM) Based on Correlation Between TCM Constitution and Physical Examination Indices

Objective Identification of one’s constitution based on a combination of features and back propagation neural network theory is needed in modern medicine and traditional Chinese medicine(TCM).We describe a method to identify one’s constitution based on TCM constitution classification and a physical index model.Methods We created a constitution identification system based on neural network using Visio Studio development tool.We report the initial implementation of the system,the accuracy of which was verified using actual data.Results We found a relatively strong correlation between TCM constitution and physical indicators.Conclusion Finally,our report describes a possible application of the proposed system.

A New Model for Correlation between the Marine Benthic Oxygen Isotope and Red Clay Magnetic Susceptibility on the Chinese Loess Plateau

Objective Aeolian sediments on the Chinese Loess Plateau contain some of the best continental archives of palaeoclimate change in the Late Cenozoic. The consensus that alternating MS in loess-paleosols in China was due to the strengthening and weakening of the East Asian palaeomonsoon provides an excellent climate record when correlated with global ice volume. Significantly, new basal dates from the red clay underlying the loess-paleosol sequence indicate that wind-blown dust began to accumulate on the Chinese Loess Plateau at least 22 million years ago. There are differences of opinion,

Application and comparison of coaxial correlation diagram and hydrological model for reconstructing flood series under human disturbance

Intense human activities have greatly changed the flood generation conditions in most areas of the world, and have destroyed the consistency in the annual flood peak and volume series. For design flood estimation, coaxial correlation diagram and conceptual hydrological model are two frequently used tools to adjust and reconstruct the flood series under human disturbance. This study took a typical mountain catchment of the Haihe River Basin as an example to investigate the effects of human activities on flood regime and to compare and assess the two adjustment methods. The main purpose is to construct a conceptual hydrological model which can incorporate the effects of human activities. The results show that the coaxial correlation diagram is simple and widely-used, but can only adjust the time series of total flood volumes. Therefore, it is only applicable under certain conditions(e.g. There is a strong link between the flood peaks and volumes and the link is not significantly affected by human activities). The conceptual model is a powerful tool to adjust the time series of both flood peak flows and flood volumes over different durations provided that it is closely related to the catchment hydrological characteristics, specifically accounting for the effects of human activities, and incorporating expert knowledge when estimating or calibrating parameters. It is suggested that the two methods should be used together to cross check each other.

Application and Verification of Logarithmic LinearCorrelation Model of Element Contents Between Tree Ringsand Soils near the Tree Roots

Nine Platanus acerifolia (Ait.) Willd. trees growing in the Nanjing Children Teacher’s School, Nanjing,China, were selected to determine the contents of 13 chemical elements both in the 1994’s growth rings,C(Z, t), and in the soils near the roots, C’(Z, t), of the trees. The results showed that the relationship between C(Z, t) and C’(Z, t) followed the logarithmic linear correlation model, lgC’(Z, t)=a(Z)+b(Z) ig C (Z, t).Based on this model the chrono-sequences of chemical element contents in the soils were reproduced from those in the tree rings; i.e., the dynamic variations in the chemical element contents of the soils at the sites were traced. In this study the chrono-sequences of the chemical elements including Cd, Ph, Mn, Co and Zn in the soils near the roots of a Platanus acerifolia tree from 1957 to 1994 were established, and the background values of Cd, Pb, Mn, Co and Zn in the soil were calculated by taking the lowest values of the chrono-sequences of the element contents as upper limits of the background values.

SAR Image Compression Using Integer to Integer Transformations, Dimensionality Reduction, and High Correlation Modeling

In this document, we present new techniques for near-lossless and lossy compression of SAR imagery saved in PNG and binary formats of magnitude and phase data based on the application of transforms, dimensionality reduction methods, and lossless compression. In particular, we discuss the use of blockwise integer to integer transforms, subsequent application of a dimensionality reduction method, and Burrows-Wheeler based lossless compression for the PNG data and the use of high correlation based modeling of sorted transform coefficients for the raw floating point magnitude and phase data. The gains exhibited are substantial over the application of different lossless methods directly on the data and competitive with existing lossy approaches. The methods presented are effective for large scale processing of similar data formats as they are heavily based on techniques which scale well on parallel architectures.

Total Pairwise Quantum Correlation and Entanglement in a Mixed-Three-Spin Ising-XY Model with Added Dzyaloshinskii-Moriya Interaction under Decoherence

We investigate the behavior of geometric global quantum discord （GGQD） and concurrence （C） between half- spins of a mixed-three-spin （1/2, 1, 1/2） system with the Ising-XY model for which spins （1, 1/2） have the Ising interaction and half-spins （1/2, 1/2） have both XY and the Dzyaloshinskii Moriya interactions together, under the decoherence action. A single-ion anisotropy property with coefficient ζ is assumed for the spin-integer. This system which includes an analytical Hamiltonian is considered at the front of an external homogeneous magnetic field B in thermal equilibrium. Finally, we compare GGQD and C and express some interesting phase flip reactions of the total quantum correlation and pairwise entanglement between spins （1/2, 1/2）. Generally, we conclude that the concurrence and GGQD have different behaviors under the phase flip channel.

The Meteorological Prediction Model of Lemon Production in Anyue County Based on Correlation

Using the meteorological data during 1971- 2013 and lemon growth and yield data during 2003- 2013 in Anyue,the suitability problem of lemon growth and correlation problem between meteorological factors and lemon growth in Anyue area were studied. According to relevance between the selected meteorological factors and yield of lemon,meteorological prediction model of lemon yield was established in Anyue,and the prediction accuracy was higher. The research had certain guiding significance for management work of lemon production in Anyue area.

Linear Precoder Design for Correlated Rician Fading Channel Under Imperfect CSI

In this paper,we have modeled a linear precoder for indoor multiuser multiple input multiple output(MU-MIMO)system with imperfect channel state information(CSI)at transmitter.The Rician channel is presumed to be mutually coupled and spatially,temporarily correlated.The imperfection with CSI is primarily due to the channel estimation error at receiver and feedback delay amidst the receiver and transmitter in CSI transmission.Along with,the insufficient spacing between the antenna at transmitter and receiver persuades mutual coupling(MC)among the array elements.In addition,the MIMO channel is presumed to be jointly correlated(Weichselberger correlation model).When we look back on the existing precoder design,it considered spatial correlation alone disregarding joint correlation of antenna array elements.With all above assumption,we have designed a linear precoder which minimizes mean squared error(MSE)subjected to total transmit power constraint for MUMIMO system.The simulation results proven that proposed precoder shows substantial enhancement in bit error rate(BER)performance in comparison with the existing technique.The mathematical analysis corroborates the simulation results.

Preliminary Study on the Vaporization Ratio of the Slurry in the Residue Fluid Catalytic Cracking Disengager

The vaporization ratios of the slurry at various temperature and partial pressure were calculated with the group-contribution method,and then the phase state of the slurry in the residue fluid catalytic cracking(RFCC) disengager was determined.This research could provide some advices on how to select the technological conditions to decrease the coking in the RFCC disengager.The oil gas temperature and the slurry partial pressure had signifi- cant effects on the vaporization ratio of the slurry.Increasing the oil gas temperature and reducing the slurry partial pressure could effectively slow down the coking speed in the RFCC disengager.According to the calculation results, a correlation was established to predict the vaporization ratio of the slurry under different operating conditions.