MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-d...MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.展开更多
Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O ...Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O electrocatalysis.In this method,NO_(x)is provided by the gliding arc discharge and then electrolyzed by Cu/Cu_(2)O after alkaline absorption.The electrical characteristics,the optical characteristics and the NO_(x)production are investigated in discharges at different input voltage and the gas flow.The dependence of ammonia production through Cu/Cu_(2)O electrocatalysis on pH value and reduction potential are determined by colorimetric method.In our study,two discharge modes are observed.At high input voltage and low gas flow,the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode(A-G mode).As lowering input voltage and raising gas flow,the plasma channel is destroyed and high frequency breakdown occurs instead,which is known as the breakdown gliding discharge mode(B-G mode).The optimal NO_(x)production of 7.34 mmol h^(-1)is obtained in the transition stage of the two discharge modes.The ammonia yield reaches0.402 mmol h^(-1)cm^(-2)at pH value of 12.7 and reduction potential of-1.0 V versus reversible hydrogen electrode(RHE).展开更多
采用水热合成法制备了CuS_(x)催化剂,通过改变前驱体铜硫比〔n(Cu)∶n(S)〕,调控催化剂形貌和反应路径。将CuS_(x)催化剂用于温和电势下CO_(2)高效电催化还原制CO反应。采用XRD、FESEM和XPS对CuS_(x)催化剂进行了表征,探究了铜硫比对CuS...采用水热合成法制备了CuS_(x)催化剂,通过改变前驱体铜硫比〔n(Cu)∶n(S)〕,调控催化剂形貌和反应路径。将CuS_(x)催化剂用于温和电势下CO_(2)高效电催化还原制CO反应。采用XRD、FESEM和XPS对CuS_(x)催化剂进行了表征,探究了铜硫比对CuS_(x)催化剂电催化CO_(2)还原“构效关系”的影响。结果表明,铜硫比影响CuS晶体成核与生长,进而影响CuS_(x)催化剂的形貌和S空位缺陷。当铜硫比在2∶1~1∶4内变化,CuS_(x)催化剂的形貌由荷花状转化为花球状,S空位含量由20.66%提高至63.37%,CO_(2)电催化还原活性和目标产物CO选择性明显提升。由铜硫比为1∶4制备的CuS_(x)催化剂(CuS-1∶4)在0.1 mol/L的KHCO3电解液中,在–0.51 V vs.RHE(可逆氢电极)的温和电势下,CO选择性达72.67%。CuS-1∶4优异的CO_(2)还原性能归因于催化剂花球状形貌、高比表面积和气体扩散通道提供的不饱和活性位点促进了气体扩散,以及S空位缺陷对电子传递和*COOH中间体在催化剂表面吸附的强化作用。展开更多
Cu/ZrO2/SiO2 are efficient catalysts for the selective hydrogenation of CO2 to CH3OH. In order to understand the role of ZrO2 in these mixed-oxides based catalysts, in situ X-ray absorption spectroscopy has been carri...Cu/ZrO2/SiO2 are efficient catalysts for the selective hydrogenation of CO2 to CH3OH. In order to understand the role of ZrO2 in these mixed-oxides based catalysts, in situ X-ray absorption spectroscopy has been carried out on the Cu and Zr K-edge. Under reaction conditions, Cu remains metallic, while Zr is present in three types of coordination environment associated with 1) bulk ZrO2, 2) coordinatively saturated and 3) unsaturated Zr(Ⅳ) surface sites. The amount of coordinatively unsaturated Zr surface sites can be quantified by linear combination fit of reference X-Ray absorption near edge structure (XANES) spectra and its amount correlates with CH3OH formation rates, thus indicating the importance of Zr(Ⅳ) Lewis acid surface sites in driving the selectivity toward CH3OH. This finding is consistent with the proposed mechanism, where CO2 is hydrogenated at the interface between the Cu nanoparticles that split H2 and Zr(Ⅳ) surface sites that stabilizes reaction intermediates.展开更多
A novel pH gradient methodology was used to synthesise a series of Cu–ZrO2 catalysts containing different quantities of Cu and Zr.All of the catalysts were highly selective to the desired product,γ-valerolactone, an...A novel pH gradient methodology was used to synthesise a series of Cu–ZrO2 catalysts containing different quantities of Cu and Zr.All of the catalysts were highly selective to the desired product,γ-valerolactone, and are considerably more stable than Cu–ZrO2 catalysts prepared by other co-precipitation methods for this reaction.Characterisation and further investigation of these catalysts by XRD, BET, SEM and XPS provided insight into the nature of the catalytic active site and the physicochemical properties that lead to catalyst stability.We consider the active site to be the interface between Cu/CuOxand ZrOx and that lattice Cu species assist with the dispersion of surface Cu through the promotion of a strong metal support interaction.This enhanced understanding of the active site and roles of lattice and surface Cu will assist with future catalyst design.As such, we conclude that the activity of Cu–ZrO2 catalysts in this reaction is dictated by the quantity of Cu–Zr interface sites.展开更多
Cu/CeO2-ZrO2 catalysts for water-gas shift （WGS） reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of...Cu/CeO2-ZrO2 catalysts for water-gas shift （WGS） reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of N2 physical adsorption analysis, XRD and H2-TPR. The results indicate that the BET surface areas of the catalysts are increased in varying degrees due to the presence of ZrO2. With increasing ZrO2 content, the pore size distribution is centered on 1.9 nm. ZrO2 can efficiently restrain the growth of Cu crystal particles. The appropriate amount of ZrO2 in the Cu/CeO2 catalysts can help the catalyst keep better copper dispersion in the WGS reaction, which can lead to both higher catalytic activity and better thermal stability. When ZrO2 content is 10% （atom fraction）, Cu/CeO2-Zr02 catalyst reaches a CO conversion rate of 73.7% at the reaction temperature of 200℃.展开更多
文摘MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.
文摘Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O electrocatalysis.In this method,NO_(x)is provided by the gliding arc discharge and then electrolyzed by Cu/Cu_(2)O after alkaline absorption.The electrical characteristics,the optical characteristics and the NO_(x)production are investigated in discharges at different input voltage and the gas flow.The dependence of ammonia production through Cu/Cu_(2)O electrocatalysis on pH value and reduction potential are determined by colorimetric method.In our study,two discharge modes are observed.At high input voltage and low gas flow,the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode(A-G mode).As lowering input voltage and raising gas flow,the plasma channel is destroyed and high frequency breakdown occurs instead,which is known as the breakdown gliding discharge mode(B-G mode).The optimal NO_(x)production of 7.34 mmol h^(-1)is obtained in the transition stage of the two discharge modes.The ammonia yield reaches0.402 mmol h^(-1)cm^(-2)at pH value of 12.7 and reduction potential of-1.0 V versus reversible hydrogen electrode(RHE).
文摘采用水热合成法制备了CuS_(x)催化剂,通过改变前驱体铜硫比〔n(Cu)∶n(S)〕,调控催化剂形貌和反应路径。将CuS_(x)催化剂用于温和电势下CO_(2)高效电催化还原制CO反应。采用XRD、FESEM和XPS对CuS_(x)催化剂进行了表征,探究了铜硫比对CuS_(x)催化剂电催化CO_(2)还原“构效关系”的影响。结果表明,铜硫比影响CuS晶体成核与生长,进而影响CuS_(x)催化剂的形貌和S空位缺陷。当铜硫比在2∶1~1∶4内变化,CuS_(x)催化剂的形貌由荷花状转化为花球状,S空位含量由20.66%提高至63.37%,CO_(2)电催化还原活性和目标产物CO选择性明显提升。由铜硫比为1∶4制备的CuS_(x)催化剂(CuS-1∶4)在0.1 mol/L的KHCO3电解液中,在–0.51 V vs.RHE(可逆氢电极)的温和电势下,CO选择性达72.67%。CuS-1∶4优异的CO_(2)还原性能归因于催化剂花球状形貌、高比表面积和气体扩散通道提供的不饱和活性位点促进了气体扩散,以及S空位缺陷对电子传递和*COOH中间体在催化剂表面吸附的强化作用。
基金E.L.,K.L.,P.W.,and S.T.are supported by the SCCER-Heat and Energy Storage program
文摘Cu/ZrO2/SiO2 are efficient catalysts for the selective hydrogenation of CO2 to CH3OH. In order to understand the role of ZrO2 in these mixed-oxides based catalysts, in situ X-ray absorption spectroscopy has been carried out on the Cu and Zr K-edge. Under reaction conditions, Cu remains metallic, while Zr is present in three types of coordination environment associated with 1) bulk ZrO2, 2) coordinatively saturated and 3) unsaturated Zr(Ⅳ) surface sites. The amount of coordinatively unsaturated Zr surface sites can be quantified by linear combination fit of reference X-Ray absorption near edge structure (XANES) spectra and its amount correlates with CH3OH formation rates, thus indicating the importance of Zr(Ⅳ) Lewis acid surface sites in driving the selectivity toward CH3OH. This finding is consistent with the proposed mechanism, where CO2 is hydrogenated at the interface between the Cu nanoparticles that split H2 and Zr(Ⅳ) surface sites that stabilizes reaction intermediates.
基金financially supported by the European Union FP7 NMP project NOVACAM (Novel cheap and abundant EU-Japan604319)
文摘A novel pH gradient methodology was used to synthesise a series of Cu–ZrO2 catalysts containing different quantities of Cu and Zr.All of the catalysts were highly selective to the desired product,γ-valerolactone, and are considerably more stable than Cu–ZrO2 catalysts prepared by other co-precipitation methods for this reaction.Characterisation and further investigation of these catalysts by XRD, BET, SEM and XPS provided insight into the nature of the catalytic active site and the physicochemical properties that lead to catalyst stability.We consider the active site to be the interface between Cu/CuOxand ZrOx and that lattice Cu species assist with the dispersion of surface Cu through the promotion of a strong metal support interaction.This enhanced understanding of the active site and roles of lattice and surface Cu will assist with future catalyst design.As such, we conclude that the activity of Cu–ZrO2 catalysts in this reaction is dictated by the quantity of Cu–Zr interface sites.
文摘Cu/CeO2-ZrO2 catalysts for water-gas shift （WGS） reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of N2 physical adsorption analysis, XRD and H2-TPR. The results indicate that the BET surface areas of the catalysts are increased in varying degrees due to the presence of ZrO2. With increasing ZrO2 content, the pore size distribution is centered on 1.9 nm. ZrO2 can efficiently restrain the growth of Cu crystal particles. The appropriate amount of ZrO2 in the Cu/CeO2 catalysts can help the catalyst keep better copper dispersion in the WGS reaction, which can lead to both higher catalytic activity and better thermal stability. When ZrO2 content is 10% （atom fraction）, Cu/CeO2-Zr02 catalyst reaches a CO conversion rate of 73.7% at the reaction temperature of 200℃.
