Frequency droop control is widely used in permanent magnet synchronous generators(PMSGs)based wind turbines(WTs)for grid frequency support.However,under frequency deviations,significant DC-link voltage fluctuations ma...Frequency droop control is widely used in permanent magnet synchronous generators(PMSGs)based wind turbines(WTs)for grid frequency support.However,under frequency deviations,significant DC-link voltage fluctuations may occur during the transient process due to sudden changes in real power of such WTs.To address this issue,a current feedforward control strategy is proposed for PMSG-based WTs to reduce DC-link voltage fluctuations when the WTs are providing frequency support under grid frequency deviations.Meanwhile,the desired frequency support capability of the PMSG-based WTs can be ensured.Simulation results verify the rationality of the analysis and the effectiveness of the proposed control method.展开更多
Virtual synchronous control has been widely studied for the advantages of emulating inertia for voltage source converters (VSCs). A constant dc-link voltage is usually assumed in existing literature to estimate transi...Virtual synchronous control has been widely studied for the advantages of emulating inertia for voltage source converters (VSCs). A constant dc-link voltage is usually assumed in existing literature to estimate transient stability of virtual synchronous generators (VSGs). However, actual power supply in the dc-side of VSGs is limited and different dc-link voltage controllers are needed to achieve power balance between DC side and AC side. Addition of dc-link voltage controller has great influence on transient behavior of VSGs, which has not been investigated by previous research. To fill this gap, this paper gives insights into the effect of dc-link voltage dynamics on transient stability of VSGs. First, two typical kinds of VSGs with dc-link voltage controllers are introduced. Then, mathematical models considering dc-link dynamics are established and the effect of dc-link voltage controllers on transient synchronization stability of VSGs is revealed through equal area criterion (EAC). It is found that dc-link voltage controller would reduce stability margin of VSGs and design-oriented transient stability analysis is carried out quantitively using critical clearing time (CCT). Finally, simulation results are given to validate correctness of theoretical analysis.展开更多
DC-link capacitors play a vital role in managing ripple voltage and current in converters and various devices.This study focuses on exploring the aging characteristics of DC-link capacitors in alternating humid and th...DC-link capacitors play a vital role in managing ripple voltage and current in converters and various devices.This study focuses on exploring the aging characteristics of DC-link capacitors in alternating humid and thermal environments aligned with the operational conditions in photovoltaic and wind power applications.Adhering to relevant power equipment standards,we designed a 24-h alternating humid and thermal aging environment tailored to the requirements of DC-link capacitors.An aging test platform is established,and 20 widely used metallized polypropylene film capacitors are selected for evaluation.Parameters such as the capacitance,equivalent series resistance(ESR),and phase angle are assessed during aging,as well as the onset time and extent of aging at various intervals.This study focuses on the aging mechanisms,analyzing electrode corrosion,the self-healing process,and dielectric aging.Fitting the aging characteristics enabled us to calculate the lifespan of the capacitor and predict it under different degrees of capacitance decay.The results show that under alternating humid and thermal conditions,capacitance attenuation and ESR increase exhibit exponential nonlinearity,influenced by factors such as the oxidation and self-healing of capacitive metal electrodes,dielectric main-chain fracture,and crystal transformation.This study underscores the pivotal role of encapsulation in determining the aging decay time.展开更多
The modular multilevel converter(MMC)is a promising topology for medium-voltage drive applications due to its high-quality output waveforms,low device switching frequency and voltage rating.However,the large cell capa...The modular multilevel converter(MMC)is a promising topology for medium-voltage drive applications due to its high-quality output waveforms,low device switching frequency and voltage rating.However,the large cell capacitor voltage ripple is a severe challenge faced by MMC at low motor speeds.Recently,a hybrid MMC(HMMC)topology is proven to be a competitive solution because of its lower cell capacitor voltage ripple and not demonstrating a common-mode voltage(CMV)problem compared with other methods.However,the DC-link switch with IGBT limits HMMC from being applied in highvoltage applications.This paper uses a thyristor instead of IGBT as the DC-link switch.To ensure the thyristor can be softly turned on and safely turned off,a new control scheme is proposed.When using this proposed scheme,HMMC can also tolerate the failure of the thyristor being turned-off without shutting down the system,effectively improving its reliability.The cell capacitor voltage ripple analysis is presented considering the effects of the thyristor switching process.In addition,a decoupled energy balancing control is utilized to suppress the fluctuation of the DC current.Experimental results obtained from a 380 V/7.5 kW downscaled prototype validate the effectiveness of starting up a motor from the standby mode to rated speed applying full-torque.展开更多
This paper proposes an indirect power control of doubly fed induction generator （DFIG） with the rotor connected to the electric grid through a back-to-back pulse width modulation （PWM） converter for variable speed...This paper proposes an indirect power control of doubly fed induction generator （DFIG） with the rotor connected to the electric grid through a back-to-back pulse width modulation （PWM） converter for variable speed wind power generation. Appropriate state space model of the DFIG is deduced. An original control strategy based on a variable structure control theory, also called sliding mode control, is applied to achieve the control of the active and reactive power exchanged between the stator of the DFIG and the grid. A proportional-integral-（P1） controller is used to keep the DC-link voltage constant for a back-to-back PWM converter. Simulations are conducted for validation of the digital controller operation using Matlab/Simulink software.展开更多
基金This work is jointly supported by the National Key R&D Programme of China(No.2017YFB0902000)the National Natural Science Foundation of China(No.U1766206)the Science and Technology Programme of the State Grid Corporation(No.52110418000P).
文摘Frequency droop control is widely used in permanent magnet synchronous generators(PMSGs)based wind turbines(WTs)for grid frequency support.However,under frequency deviations,significant DC-link voltage fluctuations may occur during the transient process due to sudden changes in real power of such WTs.To address this issue,a current feedforward control strategy is proposed for PMSG-based WTs to reduce DC-link voltage fluctuations when the WTs are providing frequency support under grid frequency deviations.Meanwhile,the desired frequency support capability of the PMSG-based WTs can be ensured.Simulation results verify the rationality of the analysis and the effectiveness of the proposed control method.
基金supported in part by National Natural Science Foundation of China(grant No.52207190)Funds for International Cooperation and Exchange of the National Natural Science Foundation of China(No.52061635104)。
文摘Virtual synchronous control has been widely studied for the advantages of emulating inertia for voltage source converters (VSCs). A constant dc-link voltage is usually assumed in existing literature to estimate transient stability of virtual synchronous generators (VSGs). However, actual power supply in the dc-side of VSGs is limited and different dc-link voltage controllers are needed to achieve power balance between DC side and AC side. Addition of dc-link voltage controller has great influence on transient behavior of VSGs, which has not been investigated by previous research. To fill this gap, this paper gives insights into the effect of dc-link voltage dynamics on transient stability of VSGs. First, two typical kinds of VSGs with dc-link voltage controllers are introduced. Then, mathematical models considering dc-link dynamics are established and the effect of dc-link voltage controllers on transient synchronization stability of VSGs is revealed through equal area criterion (EAC). It is found that dc-link voltage controller would reduce stability margin of VSGs and design-oriented transient stability analysis is carried out quantitively using critical clearing time (CCT). Finally, simulation results are given to validate correctness of theoretical analysis.
基金Supported by the Opening Project of State Key Laboratory of Large Electric Drive System and Equipment Technology(SKLLDJ022020004).
文摘DC-link capacitors play a vital role in managing ripple voltage and current in converters and various devices.This study focuses on exploring the aging characteristics of DC-link capacitors in alternating humid and thermal environments aligned with the operational conditions in photovoltaic and wind power applications.Adhering to relevant power equipment standards,we designed a 24-h alternating humid and thermal aging environment tailored to the requirements of DC-link capacitors.An aging test platform is established,and 20 widely used metallized polypropylene film capacitors are selected for evaluation.Parameters such as the capacitance,equivalent series resistance(ESR),and phase angle are assessed during aging,as well as the onset time and extent of aging at various intervals.This study focuses on the aging mechanisms,analyzing electrode corrosion,the self-healing process,and dielectric aging.Fitting the aging characteristics enabled us to calculate the lifespan of the capacitor and predict it under different degrees of capacitance decay.The results show that under alternating humid and thermal conditions,capacitance attenuation and ESR increase exhibit exponential nonlinearity,influenced by factors such as the oxidation and self-healing of capacitive metal electrodes,dielectric main-chain fracture,and crystal transformation.This study underscores the pivotal role of encapsulation in determining the aging decay time.
基金This work was supported by the National Natural Science Foundation of China under Grant 51720105008 and 52177173。
文摘The modular multilevel converter(MMC)is a promising topology for medium-voltage drive applications due to its high-quality output waveforms,low device switching frequency and voltage rating.However,the large cell capacitor voltage ripple is a severe challenge faced by MMC at low motor speeds.Recently,a hybrid MMC(HMMC)topology is proven to be a competitive solution because of its lower cell capacitor voltage ripple and not demonstrating a common-mode voltage(CMV)problem compared with other methods.However,the DC-link switch with IGBT limits HMMC from being applied in highvoltage applications.This paper uses a thyristor instead of IGBT as the DC-link switch.To ensure the thyristor can be softly turned on and safely turned off,a new control scheme is proposed.When using this proposed scheme,HMMC can also tolerate the failure of the thyristor being turned-off without shutting down the system,effectively improving its reliability.The cell capacitor voltage ripple analysis is presented considering the effects of the thyristor switching process.In addition,a decoupled energy balancing control is utilized to suppress the fluctuation of the DC current.Experimental results obtained from a 380 V/7.5 kW downscaled prototype validate the effectiveness of starting up a motor from the standby mode to rated speed applying full-torque.
文摘This paper proposes an indirect power control of doubly fed induction generator （DFIG） with the rotor connected to the electric grid through a back-to-back pulse width modulation （PWM） converter for variable speed wind power generation. Appropriate state space model of the DFIG is deduced. An original control strategy based on a variable structure control theory, also called sliding mode control, is applied to achieve the control of the active and reactive power exchanged between the stator of the DFIG and the grid. A proportional-integral-（P1） controller is used to keep the DC-link voltage constant for a back-to-back PWM converter. Simulations are conducted for validation of the digital controller operation using Matlab/Simulink software.
