In-situ Characterization of Non-aqueous Nano-dispersion Systems by Freeze-etching TEM and Comparative Study with Laser Scattering Method

In-situ characterization of non-aqueous nano-dispersion systems（NANDS） by freeze-etching transmission electron microscope（FETEM） was reported.To improve just-for-once successive rate of specimen preparation and get good characterization results,an improving specimen preparation method of freezing etching was developed.Size,distribution and morphology of NANDS were directly visualized.Some information of particle dispersion feature and particle density can also be obtained.Reproductivity of the FETEM characterization is excellent.Comparing with laser scattering method,which is liable to give positive error especially for small size particle anchoring disperser,FETEM characterization can give more accurate measurement of particle size.Moreover,FETEM can give dispersion feature of nanoparticle in non-aqueous medium.

Co-amorphous solid dispersion systems of lacidipine-spironolactone with improved dissolution rate and enhanced physical stability

Co-amorphous solid dispersion(C-ASD)systems have attracted great attention to improve the solubility of poorly soluble drugs,but the selection of an appropriate stabilizer to stabilize amorphous forms is still a huge challenge.Herein,C-ASD system of two clinical combined used drugs(lacidipine(LCDP)and spironolactone(SPL))as stabilizers to each other,was prepared by solvent evaporation method.The effects of variation in molar ratio of LCDP and SPL(3:1,1:1,1:3,1:6,and 1:9)on the drug release characteristics were explored.Polarized light microscopy(PLM),powder X-ray diffraction(PXRD),differential scanning calorimetry(DSC)and thermogravimetric analysis(TGA)were employed to evaluate the solid states.Prepared C-ASDs were further studied for their stability under the high humidity(RH 92.5%).Further analysis of C-ASDs via Fourier-transform infrared spectroscopy(FTIR)and Raman spectroscopy confirmed that hydrogen bond interactions between the two drugs played a significant role in maintaining the stability of the C-ASDs systems.Moreover,molecular dynamic(MD)simulations provided a clear insight into the stability mechanism at the molecular level.This study demonstrated the novel drug-drug C-ASDs systems is a promising formulation strategy for improved dissolution rate and enhanced physical stability of poorly soluble drugs.

Development of self-micellizing solid dispersion system employing amphipathic copolymer for the improvement of dissolution and oral bioavailability of cyclosporine A

The main objective of the present study is to develop a selfmicellizing solid dispersion(SMSD)system of cyclosporine A(CsA)using an amphiphilic copolymer,poly[MPC-co-BMA](pMB)to improve the biopharmaceutical properties of CsA(Fig.1A).Unlike conventional carrier compounds,pMB would perform the bifunctional ability as both polymeric carrier of solid dispersion system and solubilizer derived from a high micellizing property,which could be considered beneficial for the production of highly water soluble formulation of poorly water soluble compound[1].Improvement in the aqueous solubility has been believed to be a key consideration for acquiring potent pharmacological effects of BCS class II drug like CsA.

Mathematical modeling of the bellows dispersion system of submunitions

A mathematical model of the bellows dispersion system is developed by combining the interior ballistic theory with structural dynamics theory to describe the deformation course of bellows. By analyzing the physical model of the bellows dispersion system, the dispersion course is divided into three stages. For each stage, mathematical model is built and its terminal conditions are given. The numerical simulation is based on the Runge-Kutta method and differential quadrature method. Simulation results of the model agree with those of the model built by only interior ballistics theory. However, this model is congruous with the actual dispersion course and can more easily determine the dispersion time and submunition displacement.

CONTROLLED/"LIVING" RADICAL POLYMERIZATION OF STYRENE IN AN AQUEOUS DISPERSION SYSTEM

Atom transfer radical polymerization (ATRP) of styrene catalyzed by cuprous (CuX)/1,10-phenanthroline (Phen) and CuX/CuX2/Phen was conducted in an aqueous dispersed system. A stable latex was obtained by using ionic surfactant sodium lauryl sulfonate (SLS) or composite surfactants, such as SLS/polyoxyethylene nonyl phenyl ether (OP-10), SLS/hexadecanol and SLS/OP-10/hexadecanol, Among which SLS and SLS/OP-10/hexadecanol systems established better dispersed effect during the polymerization, It was found that Phen was a more suitable ligand than N,N,N',N',N'-pentamethyldiethylenetriamine (PMDETA) to maintain an appropriate equilibrium of the activator Cu(I) and the deactivator Cu(II) between the organic phase and the water phase, The effect of several initiators (such as EBiB, CCl4 and 1-PEBr) and the temperature on such a kind of ATRP system was also observed. The number-average molar mass (M-n) of polystyrene (PS) increased with the conversion and the molar mass distribution (M-w/M-n) remained narrow. These experimental data show that the polymerization could be controlled except for the quick increase of monomer conversion and the number-average molar mass of PS in the initial stage of polymerization. Furthermore, the initiator efficiency was found to be low (similar to57%) in CuX/Phen catalyzed system. To overcome this problem, Cu(II)X-2 (20 mol%-50 mol% based on CuX) was introduced into the polymerization system. In this case, higher initiator efficiency (60%-90%), low M-w/M-n of PS (as low as 1.08) were achieved and the molar masses of the PS fit with the theoretical ones.

A Global Investigation About Hard Core Attractive Yukawa Approximation and Adhesive Hard Sphere Approximation for Structure of Colloidal Dispersion Systems

The accuracy of hard core attractive Yukawa (HCAY) potential and adhesivehard sphere (AH) potential in representing the structure factor of short range square well potentialand Asakura and Oosawa (AO) depletion potential is examined by comparing theoretical predictionswith the existing simulation data and the present numerical results from the non-linear optimizedrandom phase approximation closure for Ornstein—Zernike equation. For the case of square-well (SW)potential, it is shown that the structure factor of HCAY potential based on a recently proposedsemi-analytical expression for the radial distribution function can describe the structure factor ofSW potential with reduced well width λ ≤ 2 only if the reduced contact potential βε_(sw) ≤0.25, while the analytical expression for the structure factor of AH potential under Percus-Yevick(PY) approximation completely fails for the case of λ 】 1.2. For the case of AO depletionpotential, the domain of validity of both HCAY potential and AH potential is complementary. With theabove analysis and considering the solid-liquid transition of the AH potential with an adhesiveparameter τ below 1.31 cannot be predicted by modified weighted density approximation, the roleplayed by the HCAY potential about the mapping manipulation should not be ignored.

Effect of trigger system on experimental dispersion characteristics of active surface wave testing

A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is insufficient.This study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical explanation.Subsequently,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is proposed.Two active surface wave testing cases are considered to validate the theory and method.The results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.

The Effect of Hydrostatic Pressure Fields on the Dispersion Characteristics of Fluid-shell Coupled System

The effect of hydrostatic pressure on the vibration dispersion characteristics of fluid-shell coupled structures was studied.Both fluid-loaded cylindrical shells and fluid-filled cylindrical shells were considered.Numerical analysis was applied to solve the dispersion equations for shells filled with or loaded with fluid at various hydrostatic pressures.The results for external pressure showed that non-dimensional axial wave numbers are nearly independent when the pressure is below the critical level.The influence of internal pressure on wave numbers was found significant for the real branch s=1 and the complex branches of dispersion curves.The presence of internal pressure increased the cut on frequencies for the branch s=1 for high order wave modes.

A New Fire Detection Method Using a Multi-Expert System Based on Color Dispersion, Similarity and Centroid Motion in Indoor Environment

In this paper, a video fire detection method is proposed, which demonstrated good performance in indoor environment. Three main novel ideas have been introduced. Firstly, a flame color model in RGB and HIS color space is used to extract pre-detected regions instead of traditional motion differential method, as it’s more suitable for fire detection in indoor environment. Secondly, according to the flicker characteristic of the flame, similarity and two main values of centroid motion are proposed. At the same time, a simple but effective method for tracking the same regions in consecutive frames is established. Thirdly,a multi-expert system consisting of color component dispersion,similarity and centroid motion is established to identify flames.The proposed method has been tested on a very large dataset of fire videos acquired both in real indoor environment tests and from the Internet. The experimental results show that the proposed approach achieved a balance between the false positive rate and the false negative rate, and demonstrated a better performance in terms of overall accuracy and F standard with respect to other similar fire detection methods in indoor environment.

High-speed polarization mode dispersion compensation in a 43-Gb/s RZ-DQPSK transmission system over 1200 km of standard single-mode fibre

This paper reports that the designed optical polarization mode dispersion compensator shows a good performance under the real-time variation of differential group delay, state of polarization and principal state of polarization in a （40×43）-Gb/s dense-wavelength-multiplexing, 1200-km enhanced return-to-zero differential-quadrature-phase-shift- keying （RZ-DQPSK） system. The polarization mode dispersion tolerance of the system is improved by 26 ps using the optical polarization mode dispersion compensator. The short and long time stabilities are tested with the bit error ratio recorded.

Dispersion compensation in an open-loop all-optical chaotic communication system

The optical chaotic communication system using open-loop fiber transmission is studied under strong injection conditions. The optical chaotic communication system with open-loop configuration is studied using fiber transmission under strong injection conditions. The performances of fiber links composed of two types of fiber segments in different dispersion compensation maps are compared by testing the quality of the recovered message with different bit rates and encrypted by chaotic modulation （CM） or chaotic shift keying （CSK）. The result indicates that the performance of the pre-compensation map is always worst. Two types of symmetrical maps are identical whatever the encryption method and bit-rate of message are. For the transmitting and the recovering of message of lower bit rate （1 Gb/s）, the post-compensation map is the best scheme. However, for the message of higher bit rate （2.5 Gb/s）, the parameters in communication system need to be modified properly in order to adapt to the high-speed application. Meanwhile, two types of symmetrical maps are the best scheme. In addition, the CM method is superior to the CSK method for high-speed applications. It is in accordance with the result in a back-to-back configuration system.

Determination of the Structure of Polyacrylamide/Aluminum Citrate Colloidal Dispersion Gel System

1 INTRODUCTIONIn recent years,colloidal dispersion gel(CDG)have been attracting more and more in thefield of enhanced oil recovery on account of the cost-effectiveness and high efficiency ofblocking formation.Compared with bulk gel(BG),CDG exhibits lower polymer concentra-tion,undefined shape and selective blocking formation characteristics.The characteris-tics of CDG and BG are related to structure.In the bulk gel a continuous network of polymermolecules is formed predominant through intermolecular cross-linkages.The

Tb(III) Transport in Dispersion Supported Liquid Membrane System with D2EHPA as Carrier in Kerosene

The transport of Tb（III） in dispersion supported liquid membrane（DSLM） with polyvinylidene fluoride membrane（PVDF） as the support and dispersion solution including HCl solution as the stripping solution and di（2-ethylhexyl） phosphoric acid（D2EHPA） dissolved in kerosene as the membrane solution, has been studied. The effects of pH value, initial concentration of Tb（III） and different ionic strength in the feed phase, volume ratio of membrane solution to stripping solution, concentration of HCl solution, concentration of carrier, different stripping agents in the dispersion phase on the transport of Tb（III） have also been investigated, respectively. As a result, the optimum transport conditions of Tb（III） were obtained, i.e., the concentration of HCl solution was 4.0 mol/L, the concentration of D2EHPA was 0.16 mol/L, the volume ratio of membrane solution to stripping solution was 30：30 in the dispersion phase and pH value was 4.5 in the feed phase. Ionic strength had no obvious effect on the transport of Tb（III）. Under the optimum conditions, the transport percentage of Tb（III） was up to 96.1% in a transport time of 35 min when the initial concentration of Tb（IIl） was 1.0× 10 -4 mol/L. The diffusion coefficient of Tb（III） in the membrane and the thickness of diffusion layer between feed phase and membrane phase were obtained and the values were 1.82×10 -8 m2/s and 5.61 um, respectively. The calculated results were in good agreement with the literature data.

Experimental Study of the Effect of Autonomic Nervous System on the Transmural Dispersion of Ventricular Repolarization under Acute Myocardial Ischemia in Vivo

The effect of the autonomic nerves on the transmural dispersion of ventricular repolarization(TDR)under acute myocardial ischemia in intact canine was investigated.Using the monophasic action potential(MAP)recording technique,MAPs of the epicardium(Epi),midmyocardium(Mid)and endocardium(Endo)were recorded simultaneously by specially designed plunge-needle electrodes at the left ventricular free wall under acute myocardial ischemia in 12 open-chest dogs.MAPD 90 and TDR among three myocardial layers as well as the incidence of the early afterdepolarization(EAD)before autonomic nervous stimulation and during autonomic nervous stimulation were compared.It was found that 10 min after acute myocardial ischemia,TDR was increased from 55±8 ms to 86±15 ms during sympathetic stimulation(P<0.01).The TDR(53±9 ms)during parasympathetic stimulation was not significantly different from that of the control(55±8 ms)(P>0.05).The EAD was elicited in the Mid of 2 dogs(16%)10 min after acute myocardial ischemia,but the EAD were elicited in the Mid of 7 dogs(58%)during sympathetic stimulation(P<0.01).It was concluded that:(1)Sympathetic stimulation can increase the transmural dispersion of repolari-zation and induce early afterdepolarizations in the Mid under acute myocardial ischemia,which provide the opportunity for the ventricular arrhythmia developing;(2)Parasympathetic stimulation has no significant effect on the transmural dispersion of repolarization under myocardial ischemia.

Effect of Autonomic Nervous System on the Transmural Dispersion of Ventricular Repolarization in Intact Canine

The effect of the autonomic nerves on the transmural dispersion of ventricular repolarization in intact canine was investigated. By using the monophasic action potential (MAP) recording technique, monophasic action potentials (MAPs) of the epicardium (Epi), midmyocardium (Mid) and endocardium (Endo) were recorded simultaneously by specially designed plunge needle electrodes at the left ventricular free wall in 12 open chest dogs. MAPD 90 and transmural dispersion of repolarization among three myocardial layers as well as the incidence of the EAD before autonomic nervous stimulation and during autonomic nervous stimulation were compared. The results showed that the MAPD 90 of Epi, Mid and Endo before autonomic nervous stimulation were 278±11 ms, 316±16 ms and 270±12 ms respectively, the MAPD 90 of Mid was significantly longer than that of Epi or Endo ( P <0.01). MAPD 90 of Epi, Mid and Endo were shortened by 19±4 ms, 45±6 ms, 18±3 ms respectively during sympathetic stimulation. Compared with that of the control, the transmural dispersion of repolarization during sympathetic stimulation was shortened from 44±4 ms to 15±3 ms ( P <0.01), but early afterdepolarizations were elicited in the Mid of 5 dogs (41 %) during sympathetic stimulation. Parasympathetic stimulation did not significantly affect the MAPD 90 in the three layers. It is concluded that there is the transmural dispersion of ventricular repolarization in intact canine. Sympathetic stimulation can reduce transmural dispersion of repolarization, but it can produce early afterdepolarizations in the Mid. Parasympathetic stimulation does not significantly affect the transmural dispersion of ventricular repolarization.

Effect of^3B Group in Rings on Special Dispersion of B2O3-SiO2-ZrO2-Ta2O5-Na2O System Glass

Borosilicate glasses,with x B2O3-（60-x）SiO2-8ZrO2-8Ta2O5-24Na2O（7≤x≤59 mol%）composition,were fabricated by melt-quenching technique.NMR,UV-Vis,Raman and IR spectroscopic studies were utilized to investigate the structure of fabricated glasses.The NMR spectrum was deconvoluted into five Gaussian bands,assigned to ^4B（0B,4Si）,^4B（1B,3Si）,^4B（2B,2Si）,^3B（rings）and ^3B（loose）,to get their quantitative information.The relative dispersion deviation？P（g,F） was attributed to the relative quantity of ^3B（rings）but not all ^3B groups,and B2O3 existed mainly as[BO3]in rings firstly,and then as[BO3]in loose condition.The UV-Vis spectra revealed that the quantity of non-bridging oxygen increased firstly and then decreased with increasing concentration of B2O3.Acting as complementary techniques,Raman and IR measurements revealed that four-coordinated boron and silica mainly existed as ^4B-O-B,and Si-O-Si in Q^2,respectively,as chain structure but not framework structure,and[B？4]units prefered connections with borate rather than with silicate entities of the glass network in these studied glasses.In addition,the conclusion also certified that ^3B in＂loose＂condition located in lower wavenumbers between 1 200-1 600 cm^-1 in Raman spectra.

Patterns of species dominance, diversity and dispersion in ‘Khasi hill sal' forest ecosystem in northeast India

Background： The ＇Khasi hill sal＇ forest ecosystem in Meghalaya, India represents the easternmost limit of sal distribution. We tested if tree diversity and compositional heterogeneity of this ecosystem was higher than other sal-dominated forests due to moister environment. Methods： Vegetation was sampled in 11 transects of 10 m width and up to 500 m length covering 5.2 ha area. All stems ≥10 cm girth at breast height were enumerated. Results： We found a pattern of mixed dominance of Shored robusta （sal） and Schima wollichii and co-dominance of Pinus kesiyo and Careya arborea. The Shannon＇s diversity index （H＇） was 3.395 nats. This value is remarkably high and competitive to that of moist sal forests of eastern Himalayan foothills and sal-dominated forests of Tripura. A high value of H＇ was manifested by： a） high species richness （S = 123）, b） good equitability （70.6%）, c） ＇fair＇ resource apportionment, and d） abundance of rare species （84% species with less than one per cent of total individuals, 67% species with two or less individuals ha-1 and 59% species with one or less individuals ha-1）. The compositional heterogeneity was ＇fair＇ （Whittaker＇sβw = 3.15）. The presence of Fagaceae with six species commanding 4.3% of importance value （IVl） and of a pine （P. kesiya） in sal forest was remarkable. As many as 58 species showed ＇low density （〈 10 individuals ha-1）, uniform dispersion＇, five species achieved ＇higher density （〉 10 individuals ha-l）, uniform dispersion＇ and six of the top 10 species were ＇clumped＇. The forest showed an exponential demographic curve illustrating ＇good＇ regeneration of an expanding community. Vertical stratification was simple with a poor canopy and fair subcanopy, which together with low basal area （15.65 m2 . ha-1 for individuals ≥ 10 cm gbh） indicated logging of mature sal trees in the past. Conclusions： The ＇Khasi hill sal＇ forest ecosystem is richer in alpha and beta diversity than most sal-dominated forests, but past logging has reduced basal area. Selective removal of small timber and firewood, slash-and-burn agriculture and recurrent burning of forest floor are the principal anthropogenic factors controlling forest structure and regeneration of species.

Dispersion compensation for an ultrathin metal film using LCD-CCD system

A dispersion compensation method is introduced to correct the distorted image passing through an ultrathin metal film.An LCD-CCD system is modeled by the back propagation network and used to evaluate the transmittance of the ultrathin metal film.Training samples for the network come from 729 images captured by shooting test patches,in which the RGB values are uniformity distributed between 0 and 255.The RGB value of the original image that will be distorted by the dispersion is first transformed by mapping from the LCD to the CCD,multiplied by the inverse matrix of the transmittance matrix,and finally transformed by mapping from the CCD to the LCD,then the corrected image is obtained.In order to verify the effectiveness of the proposed method,ultrathin aluminum films with different thicknesses are evaporated on glass substrates and laid between the CCD and LCD.Experimental results show that the proposed method compensates for the dispersion successfully.

Simulation analysis and implementation of spectral dispersion system based on virtually imaged phased array

Virtually imaged phased array(VIPA)has the advantages of insensitive to polarization,simple structure and high in spectral resolution.Compared with commonly used dispersive devices,such as diffraction gratings or Fabry-Perot(FP)interferometers,VIPA is self-aligned and has high transmission efficiency.In this paper,the dispersion mechanism of the VIPA is introduced in detail,the influence of incident angle and VIPA thickness on the dispersion performance near 532 nm is calculated and analyzed with MATLAB.According to the calculated results,the selected VIPA device has a thickness of 6 mm and an incident angle of 4°.The spectral dispersion system,in combination with corresponding optical devices,is designed and simulated with ZEMAX,then the experimental system was built.The spectral dispersion system based on VIPA,at a central wavelength of 532 nm,has the free spectral range of 15.08 GHz and the spectral resolution of 0.87 GHz.The system designed in this paper can be applied to high-resolution spectral detection such as Brillouin scattering,Raman scattering,laser fluorescence,laser-induced plasma and so on.

Design of Dispersion Compensation and Nonlinear Distortion Self-compensationin Co -network Transmission Systems

Dispersion and nonlinear distortion have an effect on transmission performanc es of optic al fiber transimission systems. The schemes of dispersion compensation and nonli near distortion self-compens ation in telecom-CATV co-network transmission systems are reported, followed by investigation on (1) the impact of dispersion compensation fiber (DCF) on fi ber nonlinear effects with a cascade of erbium-doped fiber amplifiers (EDFAs) an d different dispersion compensation schemes, (2) the impact of the complex on th e total nonlinear distortion induced by EDFA gain tilt and the light source. As a result , dispersion compensation optimal scheme and EDFA negative gain tilt are suggest ed as a solution to dispersion compensation and the nonlinear distortion self-c ompensation.