This paper emphases on analyzing and investigating the mechanical behavior of electro-rheological fluid (ERF) semi-active damper. Theoretical model was developed to describe the relationship between electric field and...This paper emphases on analyzing and investigating the mechanical behavior of electro-rheological fluid (ERF) semi-active damper. Theoretical model was developed to describe the relationship between electric field and the resistance force of ERF flowing through two parallel plane electrodes. In the model, the pressure drop along electrodes was supposed to consist of two parts: one related with viscosity and the other related with dynamic yield shear stress. The concept of yield stress influence factor was developed in deriving the theoretical formula for calculating the pressure drop in the damper. The influences of some other factors, such as, non-ideal Newtonian fluid and temperature have also been taken into account. Numerical and experimental work have been performed to prove the validity of the proposed model. The comparison of both results shows that the developed model is quite effective and practicable .展开更多
Applications of Electro-Rheological (ER) or Magneto-Rheological (MR) fluids as typical smart materials have been widely investigated over the past decades (since their introduction in 40’s). The special applications ...Applications of Electro-Rheological (ER) or Magneto-Rheological (MR) fluids as typical smart materials have been widely investigated over the past decades (since their introduction in 40’s). The special applications of these materials as a means of noise suppression are not yet investigated. Constrained Layer Damping (CLD) sheets can be realized by incorporating EMR (ER/MR) materials. In this way, a multilayered damping sheet is obtained with adaptive (tunable) stiffness and damping characteristics. These properties are easily changed in proportion to the electric (magnetic) field applied upon the EMR layer. This notion has been introduced for semi-active vibration control problems. Herein, such panels incorporating EMR material are proposed for adaptive acoustic treatments. Modeling (simulation) of a 3-layered panel with the middle layer being EMR with adjustable properties is carried out in this paper. The tunability of transmission/absorption characteristics of these composite sheets enables us making smart panels for adaptive noise and acoustic treatments. An adaptive performance can be achieved via changing the properties of such panels, on line, according to some sensor outputs. The main objective is to develop proper models to predict the Transmission Loss (TL) of such panels. Also, the TL of this panel is compared with the middle layer of a Newtonian fluid.展开更多
Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was ...Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was changed, the output rotating speeds were recorded and analyzed. Results By comparing the results got under different experimental procedures with those measured with an electro-rheometer, it can be seen that the shearing rate has tremendous influence on the speed modulating of a fan clutch. This is because the disperse phase can't form chains (clusters)easily at high shear rate.Conclusion The result tested on the present ER fluid demonstrates that this fluid will show the properties of Newton one,i.e. its apparent viscosity is constant. as the shear rate increases.展开更多
A semi-active control of vehicle suspension system with eleetrorheolngieal （ER） damper is presented. ER fluid characteristics are introduced based on the Bingham plasticity model first. Then ER damper working force ...A semi-active control of vehicle suspension system with eleetrorheolngieal （ER） damper is presented. ER fluid characteristics are introduced based on the Bingham plasticity model first. Then ER damper working force is given. Finally a quarter car model with ER damper is constructed. The skyhook control strategy is adopted to simulate the amplitude-frequency characteristics and the vibration of suspension system under random road excitation on the basis of ER damper characteristics. The response curves of the vertical acceleration, the suspension dynamic working space and the tyre dynamic loading are obtained. Simulation results show that the acceleration is reduced effectively and then the ride comfort is improved by the skyhook control law.展开更多
By using oxalate group-modified TiO2 nanoparticles as the dispersing phase, different kinds of silicone oil with various viscosities and terminal groups（hydroxyl, hydrogen, and methyl） were used as the dispersing me...By using oxalate group-modified TiO2 nanoparticles as the dispersing phase, different kinds of silicone oil with various viscosities and terminal groups（hydroxyl, hydrogen, and methyl） were used as the dispersing media to prepare different electrorheological（ER） fluids. Their zero-field viscosity, yield stress under direct current electric fields, ER efficiency, shear stability, leakage current density, and sedimentation stability were tested to study the effect of carrier liquid on the properties of ER fluids. The results indicate that the zerofield viscosity, the yield stress, and the leakage current density increase with increasing viscosity of the silicone oils. The effects of the viscosity on the ER efficiency, the shear stability, and the sedimentation ratio depend on the competition between the viscous resistance and the aggregation of the particles. Among the three ER fluids prepared with silicone oil with different terminal groups, hydroxyl-terminated oil based sample has the highest zero-field viscosity, the highest field-induced yield stress and ER efficiency, the largest current density, and the best sedimentation stability.展开更多
基金Foundation of Shanghai Municipal Commission of Education (202126)
文摘This paper emphases on analyzing and investigating the mechanical behavior of electro-rheological fluid (ERF) semi-active damper. Theoretical model was developed to describe the relationship between electric field and the resistance force of ERF flowing through two parallel plane electrodes. In the model, the pressure drop along electrodes was supposed to consist of two parts: one related with viscosity and the other related with dynamic yield shear stress. The concept of yield stress influence factor was developed in deriving the theoretical formula for calculating the pressure drop in the damper. The influences of some other factors, such as, non-ideal Newtonian fluid and temperature have also been taken into account. Numerical and experimental work have been performed to prove the validity of the proposed model. The comparison of both results shows that the developed model is quite effective and practicable .
文摘Applications of Electro-Rheological (ER) or Magneto-Rheological (MR) fluids as typical smart materials have been widely investigated over the past decades (since their introduction in 40’s). The special applications of these materials as a means of noise suppression are not yet investigated. Constrained Layer Damping (CLD) sheets can be realized by incorporating EMR (ER/MR) materials. In this way, a multilayered damping sheet is obtained with adaptive (tunable) stiffness and damping characteristics. These properties are easily changed in proportion to the electric (magnetic) field applied upon the EMR layer. This notion has been introduced for semi-active vibration control problems. Herein, such panels incorporating EMR material are proposed for adaptive acoustic treatments. Modeling (simulation) of a 3-layered panel with the middle layer being EMR with adjustable properties is carried out in this paper. The tunability of transmission/absorption characteristics of these composite sheets enables us making smart panels for adaptive noise and acoustic treatments. An adaptive performance can be achieved via changing the properties of such panels, on line, according to some sensor outputs. The main objective is to develop proper models to predict the Transmission Loss (TL) of such panels. Also, the TL of this panel is compared with the middle layer of a Newtonian fluid.
文摘Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was changed, the output rotating speeds were recorded and analyzed. Results By comparing the results got under different experimental procedures with those measured with an electro-rheometer, it can be seen that the shearing rate has tremendous influence on the speed modulating of a fan clutch. This is because the disperse phase can't form chains (clusters)easily at high shear rate.Conclusion The result tested on the present ER fluid demonstrates that this fluid will show the properties of Newton one,i.e. its apparent viscosity is constant. as the shear rate increases.
文摘A semi-active control of vehicle suspension system with eleetrorheolngieal （ER） damper is presented. ER fluid characteristics are introduced based on the Bingham plasticity model first. Then ER damper working force is given. Finally a quarter car model with ER damper is constructed. The skyhook control strategy is adopted to simulate the amplitude-frequency characteristics and the vibration of suspension system under random road excitation on the basis of ER damper characteristics. The response curves of the vertical acceleration, the suspension dynamic working space and the tyre dynamic loading are obtained. Simulation results show that the acceleration is reduced effectively and then the ride comfort is improved by the skyhook control law.
基金Funded by the National Natural Science Foundation of China(51478088)
文摘By using oxalate group-modified TiO2 nanoparticles as the dispersing phase, different kinds of silicone oil with various viscosities and terminal groups（hydroxyl, hydrogen, and methyl） were used as the dispersing media to prepare different electrorheological（ER） fluids. Their zero-field viscosity, yield stress under direct current electric fields, ER efficiency, shear stability, leakage current density, and sedimentation stability were tested to study the effect of carrier liquid on the properties of ER fluids. The results indicate that the zerofield viscosity, the yield stress, and the leakage current density increase with increasing viscosity of the silicone oils. The effects of the viscosity on the ER efficiency, the shear stability, and the sedimentation ratio depend on the competition between the viscous resistance and the aggregation of the particles. Among the three ER fluids prepared with silicone oil with different terminal groups, hydroxyl-terminated oil based sample has the highest zero-field viscosity, the highest field-induced yield stress and ER efficiency, the largest current density, and the best sedimentation stability.
