Polyvinylpyrrolidone (PVP) nanofibers were processed by magnetic-field-assisted electrospinning (MFAES) technique. Since electric field intensity was one of the most important parameters influencing fiber morpholo...Polyvinylpyrrolidone (PVP) nanofibers were processed by magnetic-field-assisted electrospinning (MFAES) technique. Since electric field intensity was one of the most important parameters influencing fiber morphology, the research aimed to study how electric field intensity affects fiber morphology in MFAES technique. The experimental results revealed that the distribution of diameter widened while the average diameter of PVP fibers decreased and the degree of the alignment reduced with the increase of electric field intensity. However, the fibers would be conglutinated together when the electric field intensity was too low. Also, the increase of working distance made the average diameter and the degree of the alignment increase slightly under the same electric field intensity, but the fibers could be partially curved instead of being fully straight if the working distance was too long. It was also indicated that maintaining the electric field intensity at 1 kV/cm With the voltage-distance combinations of 12 kV-12 cm (for 12wt% PVP) and 15 kV-15 cm (for 14wt% PVP) among all other combinations would result in the optimal alignment as well as a narrow size distribution of the fibers.展开更多
Although the internal electric field(IEF)of photocatalysts is acknowledged as a potent driving force for photocharge separation,modulating the IEF intensity to achieve enhanced photocatalytic performances remains a ch...Although the internal electric field(IEF)of photocatalysts is acknowledged as a potent driving force for photocharge separation,modulating the IEF intensity to achieve enhanced photocatalytic performances remains a challenge.Herein,cuprous sulfide nanosheets with different Cu vacancy concentration were employed to study IEF modulation and corresponding direct charge transfer.Among the samples,Cu_(1.8)S nanosheets possessed intensified IEF intensity compared with those of Cu_(2)S and Cu_(1.95)S nanosheets,suggesting that an enhanced IEF intensity could be achieved by introducing more Cu vacancies.This intensified IEF of Cu_(1.8)S nanosheets induced numerous photogenerated electrons to migrate to its surface,and the dissociative electrons were then captured by Cu vacancies,resulting in efficient charge separation spatially.In addition,the Cu vacancies on Cu_(1.8)S nanosheets accumulated electrons as active sites to lower the energy barrier of rate-determining step of CO_(2)photoreduction,leading to the selective conversion of CO_(2)to CO.Herein,the manipulation of IEF intensity through Cu vacancy concentration regulation of cuprous sulfide photocatalysts for efficient charge separation has been discussed,providing a scientific strategy to rationally improve photocata lytic performances for solar energy conversion.展开更多
In this paper,we theoretically investigate the total optical coefficient(TOAC)considering 1S-2P and 2S-2P conduction subband transitions in a single parabolic quantum well(SPQW)with an on-center hydrogen-like impurity...In this paper,we theoretically investigate the total optical coefficient(TOAC)considering 1S-2P and 2S-2P conduction subband transitions in a single parabolic quantum well(SPQW)with an on-center hydrogen-like impurity.Within the framework of the effective-mass approximation,the Schrödinger equation is solved numerically to obtain the eigenvalues and their corresponding eigenvectors using the finite difference method.The calculations are performed for finite confinement potential height,taking into account the dielectric and effective mass mismatches between GaN and InGaN materials under the considered electric field and temperature effects.The temperature dependence of the effective mass,dielectric constant and band gap energy are obtained accordingly.On the one hand,the results show that a significant shift is produced with the variation of both the temperature and the intensity of the electric field.On the other hand,the absorption spectrum is shifted to lower energies with increasing both electric field strength and temperature.Moreover,its amplitude is enhanced with an increase in the intensity of the electric field,and show a slight drop with increasing temperature for the two optical transitions considered.The results show that such parameters can be used to adjust the optical properties of single parabolic Quantum Well for solar cell applications.展开更多
Direct conversion of methane into C2 hydrocarbons through alternating current electric field enhanced plasma was studied under room temperature, atmospheric pressure and low power conditions. The distribution of elect...Direct conversion of methane into C2 hydrocarbons through alternating current electric field enhanced plasma was studied under room temperature, atmospheric pressure and low power conditions. The distribution of electrical field intensity and distribution of energy were calculated with software that was developed by us according to the charge simulation method. The results indicated that the energy of tip of electrode was 0.36 J/mm^3 and it was higher than the methane dissociation energy (0.0553 J/mm^3). The methane located at this area can be activated easily. The higher-energy particles produced by dissociation collided with molecules around them and initiated consecutive reactions between free radicals and molecules. The method was proved to be valided and could be taken as a basis for the electrical field study concerned.展开更多
Different constituents of soluble salts have different effects on the insulation performance of insulators.To study the electric field distribution of soluble salt deposition on the surface of high-speed railway insul...Different constituents of soluble salts have different effects on the insulation performance of insulators.To study the electric field distribution of soluble salt deposition on the surface of high-speed railway insulators,a two-dimensional model of the cantilever insulator electrostatic field and constant-current field with soluble salt deposition is constructed.The simulation results indicate that the relative dielectric constant of dry pollution is the main factor that affects the electric field distribution on the surface of the insulator.The electric field intensity is arranged in the following order:CaSO_(4)>KNO_(3)>NaNO_(3)>K_(2)SO_(4)>NaCl>MgSO_(4),and the conductivity of each dirty liquid in the wet state becomes a key factor affecting the electric field distribution,which is specifically shown as sodium chloride>nitrate>sulfate.The simulation results are compared with existing test results to verify that they were correct.It is also found that the electric field intensity of the insulator with good hydrophobicity is slightly greater than that of the insulator without hydrophobicity.The results provide a theoretical basis for the classification of regional pollution levels and the testing of insulator contamination in the laboratory.展开更多
An improved structure that eliminates hot-carrier effects(HCE) in optimum variation lateral doping (OPTVLD) LDMOS is proposed.A formula is proposed showing that the surface electric field intensity of the conventi...An improved structure that eliminates hot-carrier effects(HCE) in optimum variation lateral doping (OPTVLD) LDMOS is proposed.A formula is proposed showing that the surface electric field intensity of the conventional structure is strong enough to make a hot-carrier injected into oxide.However,the proposed structure effectively reduces the maximum surface electric field from 268 to 100 kV/cm and can be realized without changing any process,and thereby reduces HCE significantly.展开更多
基金Fund by the Youth Foundation of the North University of China(2012)the Project of Graduate Innovation of Shanxi Province(20133102)
文摘Polyvinylpyrrolidone (PVP) nanofibers were processed by magnetic-field-assisted electrospinning (MFAES) technique. Since electric field intensity was one of the most important parameters influencing fiber morphology, the research aimed to study how electric field intensity affects fiber morphology in MFAES technique. The experimental results revealed that the distribution of diameter widened while the average diameter of PVP fibers decreased and the degree of the alignment reduced with the increase of electric field intensity. However, the fibers would be conglutinated together when the electric field intensity was too low. Also, the increase of working distance made the average diameter and the degree of the alignment increase slightly under the same electric field intensity, but the fibers could be partially curved instead of being fully straight if the working distance was too long. It was also indicated that maintaining the electric field intensity at 1 kV/cm With the voltage-distance combinations of 12 kV-12 cm (for 12wt% PVP) and 15 kV-15 cm (for 14wt% PVP) among all other combinations would result in the optimal alignment as well as a narrow size distribution of the fibers.
基金supported by the National Natural Science Foundation of China(52200123)the Open Project of Key Laboratory of Green Chemical Engineering Process of Ministry of Education(GCP2022007)the Scientific Research and Innovation Team Program of Sichuan University of Science and Engineering(SUSE652A014)。
文摘Although the internal electric field(IEF)of photocatalysts is acknowledged as a potent driving force for photocharge separation,modulating the IEF intensity to achieve enhanced photocatalytic performances remains a challenge.Herein,cuprous sulfide nanosheets with different Cu vacancy concentration were employed to study IEF modulation and corresponding direct charge transfer.Among the samples,Cu_(1.8)S nanosheets possessed intensified IEF intensity compared with those of Cu_(2)S and Cu_(1.95)S nanosheets,suggesting that an enhanced IEF intensity could be achieved by introducing more Cu vacancies.This intensified IEF of Cu_(1.8)S nanosheets induced numerous photogenerated electrons to migrate to its surface,and the dissociative electrons were then captured by Cu vacancies,resulting in efficient charge separation spatially.In addition,the Cu vacancies on Cu_(1.8)S nanosheets accumulated electrons as active sites to lower the energy barrier of rate-determining step of CO_(2)photoreduction,leading to the selective conversion of CO_(2)to CO.Herein,the manipulation of IEF intensity through Cu vacancy concentration regulation of cuprous sulfide photocatalysts for efficient charge separation has been discussed,providing a scientific strategy to rationally improve photocata lytic performances for solar energy conversion.
基金This research received no specific grant from any funding agency in the public,commercial,or not-for-profit sectors.
文摘In this paper,we theoretically investigate the total optical coefficient(TOAC)considering 1S-2P and 2S-2P conduction subband transitions in a single parabolic quantum well(SPQW)with an on-center hydrogen-like impurity.Within the framework of the effective-mass approximation,the Schrödinger equation is solved numerically to obtain the eigenvalues and their corresponding eigenvectors using the finite difference method.The calculations are performed for finite confinement potential height,taking into account the dielectric and effective mass mismatches between GaN and InGaN materials under the considered electric field and temperature effects.The temperature dependence of the effective mass,dielectric constant and band gap energy are obtained accordingly.On the one hand,the results show that a significant shift is produced with the variation of both the temperature and the intensity of the electric field.On the other hand,the absorption spectrum is shifted to lower energies with increasing both electric field strength and temperature.Moreover,its amplitude is enhanced with an increase in the intensity of the electric field,and show a slight drop with increasing temperature for the two optical transitions considered.The results show that such parameters can be used to adjust the optical properties of single parabolic Quantum Well for solar cell applications.
文摘Direct conversion of methane into C2 hydrocarbons through alternating current electric field enhanced plasma was studied under room temperature, atmospheric pressure and low power conditions. The distribution of electrical field intensity and distribution of energy were calculated with software that was developed by us according to the charge simulation method. The results indicated that the energy of tip of electrode was 0.36 J/mm^3 and it was higher than the methane dissociation energy (0.0553 J/mm^3). The methane located at this area can be activated easily. The higher-energy particles produced by dissociation collided with molecules around them and initiated consecutive reactions between free radicals and molecules. The method was proved to be valided and could be taken as a basis for the electrical field study concerned.
基金Supported by the National Natural Science Foundation of China(51767014)the Scientific and Technological Research and Development Program of the China Railway(2017J010-C/2017).
文摘Different constituents of soluble salts have different effects on the insulation performance of insulators.To study the electric field distribution of soluble salt deposition on the surface of high-speed railway insulators,a two-dimensional model of the cantilever insulator electrostatic field and constant-current field with soluble salt deposition is constructed.The simulation results indicate that the relative dielectric constant of dry pollution is the main factor that affects the electric field distribution on the surface of the insulator.The electric field intensity is arranged in the following order:CaSO_(4)>KNO_(3)>NaNO_(3)>K_(2)SO_(4)>NaCl>MgSO_(4),and the conductivity of each dirty liquid in the wet state becomes a key factor affecting the electric field distribution,which is specifically shown as sodium chloride>nitrate>sulfate.The simulation results are compared with existing test results to verify that they were correct.It is also found that the electric field intensity of the insulator with good hydrophobicity is slightly greater than that of the insulator without hydrophobicity.The results provide a theoretical basis for the classification of regional pollution levels and the testing of insulator contamination in the laboratory.
基金supported by the PhD Program Foundation of the Ministry of Education of China(No.20110185110003)
文摘An improved structure that eliminates hot-carrier effects(HCE) in optimum variation lateral doping (OPTVLD) LDMOS is proposed.A formula is proposed showing that the surface electric field intensity of the conventional structure is strong enough to make a hot-carrier injected into oxide.However,the proposed structure effectively reduces the maximum surface electric field from 268 to 100 kV/cm and can be realized without changing any process,and thereby reduces HCE significantly.