Experimental study of the temporary plugging capability of diverters to block hydraulic fractures in high-temperature geothermal reservoirs

The effective plugging of artificial fractures is key to the success of temporary plugging and diverting fracturing technology,which is one of the most promising ways to improve the heat recovery efficiency of hot dry rock.At present,how temporary plugging agents plug artificial fractures under high temperature remains unclear.In this paper,by establishing an improved experimental system for the evaluation of temporary plugging performance at high temperature,we clarified the effects of high temperature,injection rate,and fracture width on the pressure response and plugging efficiency of the fracture.The results revealed that the temporary plugging process of artificial fractures in hot dry rock can be divided into four main stages:the initial stage of temporary plugging,the bridging stage of the particles,the plugging formation stage,and the high-pressure dense plugging stage.As the temperature increases,the distribution distance of the temporary plugging agent,the number of pressure fluctuations,and the time required for crack plugging increases.Particularly,when the temperature increases by 100℃,the complete plugging time increases by 90.7%.

Experimental study on the mechanism of flow blockage formation in fast reactor

Various sources of solid particles might exist in the coolant flow of a liquid metal cooled fast reactor(e.g.,through chemical interaction between the coolant and impurities,air,or water,through corrosion of structural materials,or from damaged/molten fuel).Such particles may cause flow blockage accidents in a fuel assembly,resulting in a reduction in coolant flow,which potentially causes a local temperature rise in the fuel cladding,cladding failure,and fuel melt.To understand the blockage formation mechanism,in this study,a series of simulated experiments was conducted by releasing different solid particles from a release device into a reducer pipe using gravity.Through detailed analyses,the influence of various experimental parameters(e.g.,particle diameter,capacity,shape,and static friction coefficient,and the diameter and height of the particle release nozzle)on the blockage characteristics(i.e.,blockage probability and position)was examined.Under the current range of experimental conditions,the blockage was significantly influenced by the aforementioned parameters.The ratio between the particle diameter and outlet size of the reducer pipe might be one of the determining factors governing the occurrence of blockage.Specifically,increasing the ratio enhanced blockage(i.e.,larger probability and higher position within the reducer pipe).Increasing the particle size,particle capacity,particle static friction coefficient,and particle release nozzle diameter led to a rise in the blockage probability;however,increasing the particle release nozzle height had a downward influence on the blockage probability.Finally,blockage was more likely to occur in non-spherical particles case than that of spherical particles.This study provides a large experimental database to promote an understanding of the flow blockage mechanism and improve the validation process of fast reactor safety analysis codes.

Analysis and Experimental Study on the Friction Force at the Binding Point of Flexible Cable on Satellite

Mainly for the problem that the friction force generated by the existing process of bind-ing,fixing and fastening the flexible cable on the satellite is unknown,the friction force analysis and experimental research on the binding point of the flexible cable are carried out.The equivalent model of the cable bundle bound by nylon cable ties is established,the force on the binding point is analyzed,and the empirical formula for calculating the friction force at the binding point is estab-lished.The formula shows that the friction force is related to the cable bundle diameter,the number of winding cycles of silicone rubber tape,the width of nylon cable ties,and the binding force.The friction force tests of the cable diameter of 5.06 mm,8.02 mm,24.02 mm,38.04 mm under different winding turns of tape were carried out,which was compared with the theoretical calculation value.It is concluded that the calculation accuracy of the theoretical model is more than 95%,which can estimate the actual friction force value accurately.This provides a reference and basis for the theoretical and experimental research on the friction force of the flexible cable binding point on satellite.

Experimental study on strain field evolution around a simulated thrust fault

Earthquakes result from continuous geodynamic processes.A topic of significant interest for the scientific community is to elaborate on the phenomena governing the faulting and fracturing of crustal rocks.Therefore,in this study,uniaxial compressive shear failure experiments were conducted on Fangshan marble rock samples with a prefabricated slot to simulate thrust faulting.The center of each marble plate(105 mm × 80 mm × 5 mm) was engraved with a 30-mm long double-sided nonpenetrating slot(depth:2 mm,width:0.5 mm).The deformation and destruction processes of the rock surface were recorded using a high-speed camera.The digital image correlation method was used to calculate the displacement and strain distribution and variation at different loading stages.The accumulative and incremental displacement fields u and v,strain field exand e_(y),and shear strain e_(xy) were analyzed.When the loading level reached its ultimate value,the strain field was concentrated around the prefabricated slot.The concentration reached a maximum at the ends of the prefabricated slot.The magnitude of shear strain reached 0.1.This experiment contributes to our understanding of the dynamic process of active faulting.

Knowledge and Perceptions of Hospital Care Staff towards Medical Internet of Things and the Role of Awareness Videos: A Quasi Experimental Study

Introduction: The healthcare industry continues to adopt and integrate smart technology into its operations. However, the adoption of the eHealth solutions has not been smooth in the Kingdom of Saudi Arabia (KSA) due to negative beliefs about the technology, lack of awareness and motivation and resistance to change. Thus, this study was developed to investigate the knowledge and perceptions of hospital care staff towards the Medical Internet of Things and to explore the role of awareness videos in changing negative perceptions. Methods: One group pre-test post-test quasi-experimental study design was incorporated, and 116 participants from Ministry of Health hospitals in Riyadh, KSA, were included. A series of four videos were developed to observe their influence on the knowledge and perceptions of mIoT. Results: The findings showed that participants had more knowledge about the individual components of mIoT (particularly wearable devices) compared to the processes or functions of mIoT. Similarly, just over half (56.0%) of the individuals think that the current systems in the hospital are enough to deliver mIoT. However, 90% think mIoT is the future of digital health. Similarly, PE, SI, BI, EE and CESE were considered facilitators and PTA and CC were considered grave barriers to mIoT adoption. The awareness videos positively influenced knowledge and perceptions of PE, EE, CESE and SI. Conclusion: The study concludes that hospital staff in Riyadh (excluding doctors) possess basic mIoT knowledge, consider various adoption factors as enablers, and awareness video can play a critical role in effectively introducing the technology to the hospital care staff.

Experimental Study of Primary School Students’Independent Reading Based on the Network Teaching Platform

The development of information technology, especially the rise of online teaching platforms, has changed the way people read and the methods they use. Under this influence, primary school students’ independent reading has also been changed. However, due to limited self-control and understanding, primary school students face certain difficulties when using online teaching platforms for independent reading. Advantages and disadvantages of distance learning based on the network teaching platform were summarized in this paper. A one-year experiment study was carried out on our school fifth-grade students in independent reading using WeChat campus platform considering their current situation and existing problems of independent reading. In experiment study an independent reading mode was introduced. The results show that this reading mode can significantly improve students’ independent reading ability.

Experimental Study on the Treatment of Tertiary Oil Recovery Wastewater via a Novel Electro-Coagulation Method

At present,methods for treating tertiary oil recovery wastewater via electro-coagulation are still in their early stage of development.In this study,a device for electro-coagulation wastewater treatment was built and tested in an oil field.The effects that the initial pH value,electrode type,and connection mode have on the coagulation and separation effect were assessed by measuring the mass fraction and turbidity of oil.The results have shown that when the electro-coagulation method is used,the effectiveness of the treatment can be significantly increased in neutral pH conditions(pH=7),in acidic conditions,and in alkaline conditions.Compared to an Al electrode,the floc that is produced by an Fe electrode is smaller;thus,it does not easily coagulate and settle in a short time.Using the oil removal rate,turbidity removal rate and energy consumption as a basis to assess the performances,the results have demonstrated that the combined aluminum alloy iron composite electrode should be used as electrolytic electrode.

Simulation Analysis and Experimental Study of Defect Detection Underwater by ACFM Probe

This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.

A field experimental study of lignin sand stabilizing material(LSSM) extracted from spent-liquor of straw pulping paper mills

A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the extracts of black-liquor issued by straw pulp paper mills. Unlike the polyvinyl acetate or foamed asphalt commonly used for dune stabilization, the new material is plant-friendly and can be used with virescence actions simultaneously. The field experimental study was conducted since 2001 in China's Northwest Ningxia Hui Autonomous Region and has been proved that LSSM is effective in stabilizing the fugitive dunes, making the arenaceous plants survive and the bare dune vegetative. The advisable solution concentration is 2% and the optimal field spraying quantity is 2 5 L/m^2 The soil nutrients of the stabilized and greened dune, such as organic matter, available phosphorous and total nitrogen are all increased compared with the control treatment, which is certainly helpful to the growth of arenaceous plants. The technique is worthwhile to be popularized because it is provided not only a new method for desertification control but also an outlet for cleaning contaminants issued from the straw paper mills.

Experimental study ofcasing wear under impact-sliding conditions

Theoretical analysis and field monitoring show that lateral vibration has very important effect on casing wear in deep & ultra-deep well drilling. The wear mechanism of casing under impact-sliding work conditions has been investigated and many experiments have been completed with a newly developed full-scale casing wear test machine. Test results present that adhesion wear, contact fatigue, and grinding abrasion are the main wear mechanisms under impact-sliding test conditions. The friction coefficient and linear wear rate of the casing rise obviously with an increase in impact load. And the larger the impact load, the rougher the worn surface of the casing. The linear wear rate decreased slightly but the average friction coefficient increased slightly with an increase in impact frequency under an impact load of 2,500 N. Both the linear wear rate of the casing and the average friction coefficient increased substantially with an increase in impact frequency under an impact load of 4,000 N. Under lower impact load conditions, grinding abrasion and contact fatigue are the main mechanisms of casing wear; under higher impact load conditions, adhesion wear and contact fatigue are the main mechanisms of casing wear.

Experimental Study on Bubble Pulse Features Under the Combined Action of Horizontal and Vertical Walls

The pulse features of a bubble have a close connection with the boundary condition. When a bubble moves near a rigid wall, it will be attracted by the Bjerknes force of the wall, and a jet pointing at the wall will be generated. In real application, the bubble may move under the combined action of walls in different directions when it forms at the corner of a pipe or at the bottom of a dam. The motion of the bubble shows complex and nonlinear characteristics under these conditions. In order to investigate the bubble pulse features near complex walls, a horizontal wall and a vertical wall are put into the experimental water tank synchronously, and an electric circuit with 200 voltages is designed to generate discharge bubbles, and then experimental study on the bubble pulse features under the combined action of horizontal and vertical walls is carried out. The influences of the combined action of two walls on the bubble shape, pulse period, moving trace and inside jet are obtained by changing the distances from bubble center to the two walls. It aims at providing references for the relevant theoretical and numerical research.

Experimental Study of Multi-slice Spiral CT Perfusion Imaging in VX_ 2 Soft-tissue Tumor of Rabbits

An experimental animal model of malignant soft-tissue tumor was established to investigate the applied value of multi-slice spiral CT perfusion imaging preliminarily. Ten New Zealand white rabbits which were implanted with VX2 tumor in either proximal thigh were subjected to CT plain scan and perfusion scan two weeks later respectively, then the original perfusion images were transmitted to AW4.0 Workstation. The functional maps and perfusion parameters including blood flow （BF）, blood volume （BV）, mean transit time （MTT） and permeability surface （PS） were computed and analyzed. All the values of BF, BV and PS in VX2 soft-tissue tumors were obviously higher while the MTT-values were lower than those in the normal muscular tissues significantly. It was suggested that multi-slice spiral CT perfusion imaging is an accurate, convenient and relatively safe functional imaging technique, and can give a quantitative assessment to angiogenesis and blood perfusion of soft-tissue tumors.

Experimental study on stable isotopic fractionation of evaporating water under varying temperature

The variation of stable isotope ratios in natural waters provides valuable information that can be used to trace water movement. Evaporation plays a crucial role in determining the variation of stable isotopes. In this paper, several evaporation experiments were conducted in order to study the stable isotopic fractionation mechanism of water and analyze the influence of different temperatures on evaporation fractionation. Three group experiments of water evaporation under different temperatures and initial isotopic values were carried out. The results show that fractionation factors of hydrogen and oxygen may increase with temperature, and the average enrichment degree of hydrogen isotope D is 3.432 times that of oxygen isotope 18O. The results also show that the isotopic composition of the initial water has little influence on water evaporation fractionation, which is mainly affected by the state variables in the evaporation process, such as temperature. This research provides experimental data for further understanding the evaporation fractionation mechanism.

AN EXPERIMENTAL STUDY OF SHEET EROSION IN GRANITIC REGION OF WUHUA COUNTY,GUANGDONG PROVINCE

The relationships between rainfall, runoff and erosion in South China granitic weathering red soil region were studied by using data collected from 7 experimental plots in Wuhua County, Guangdong Province. Results showed that when rainfall is less than 50 mm, small volumes of runoff were produced. Rainfall intensity might be the main factor in controlling runoff. When rainfall exceeds 50 mm, because of its large volume and high intensity, runoff and the produced amount of erosion increased with raimfall quickly. Analysis of the relationship bebeen runoff and erosion suggsted that runoff of 30 mm (corresponding to about 50 mm rainfall might be taken as a threshold at which wter on land surface was sufficient to start the larg amount of soil particles. Vegtation cover is very effective in protection soil from being eroded. When vegetation coverag increases from 0 to 80 percent,runoff and soil loss decrease from 179.34mm/a to 126.36mm/a and 6262.15T/a km2 to 368.02 T/a km2, respectively.

An Experimental Study of Bulge-Forming Polycarbonate (PC)Semisphere Shell Parts

In this paper, a new bulge-forming technology is described to manufacture a polycarbonate semisphere shell. Some experiments have been done, and the experimental results show that this technique is feasible to form polycarbonate part. But the wall thickness distribution of the bulged specimen by this method is not so even.

Clinical and Experimental Study on Effect of Garlicin in Treating Angina Pectorls

Objective: To observe the effect and mechanism of Garlicin in treating coronary heart disease (CHD) with angina pectoris. Methods: Clinical study: 55 patients were selected and randomized into the Garlicin group and the nitroglycerin group. To Garlicin group, 60 mg of Garlicin was given by adding in 5% glucose solution for intravenous dripping once per day, the therapeutic course

Experimental Study on Uniaxial and Multiaxial Strain CyclicCharacteristics and Ratcheting of 316L Stainless Steel

An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled uniaxial tension-compression and multiaxial circular paths of loading. The ratcheting tests were conducted for the stress-controlled uniaxial tensioncompression and multiaxial circular, rhombic and linear paths of loading with different mean stresses, stress amplitudes and histories. The experiment results show that 316L stainless steel features the cyclic hardening, and its strain cyclic characteristics depend on the strain amplitude and its history apparently. The ratcheting of 316L stainless steel depends greatly on the values of mean stress, stress amplitude and their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting.

An Experimental Study on Atmospheric Pressure Glow Discharge in Different Gases

Usually, the electrical breakdown of dielectric barrier discharge (DBD) at atmo-spheric pressure leads to a filamentary non-homogeneous discharge. However, it is also possible to obtain a diffuse DBD in homogeneous form, called atmospheric pressure glow discharge (APGD). We obtained a uniform APGD in helium and in the mixture of argon with alcohol, and studied the electrical characteristics of helium APGD. It is found that the relationship between discharge current and source frequency is different depending on the difference in gas gap when the applied voltage is kept constant. The discharge current shows an increasing trend with the increased frequency when gas gap is 0.8 cm, but the discharge current tends to decrease with the increased frequency when the gas gap increases. The discharge current always increases with the increased applied voltage when the source frequency is kept constant. We also observed a glow-like discharge in nitrogen at atmospheric pressure.

Experimental study of compressible boundary layer on a cone at angles of attack

Experimental study was conducted for boundarylayers on a sharp 5° half-angle cone of 400mm length at angles of attack. The model was tested in the T-326 hypersonic wind tunnel （ITAM） at freestream Mach number M = 5.95. Mean and fluctuation wall characteristics of the boundary layer are measured at 0°, 2°, 3° and 4° angles of attack for different stagnation pressures. Pulsation measurements are carried out by means of ALTP sensor. Pressure and temperature distributions along the model are obtained, and transition beginning and end locations have been found. Boundary layer stabilization with the increase of angle of attack and the decrease of stagnation pressure is observed. High frequency pulsations inherent to hypersonic boundary layer （second mode） have been detected.

Experimental study on seismic behavior of circular RC columns strengthened with pre-stressed FRP strips

Bonding fiber reinforced polymer （FRP） has been commonly used to improve the seismic behavior of circular reinforced concrete （RC） columns in engineering practice. However, FRP jackets have a significant stress hysteresis effect in this strengthening method, and pre-tensioning the FRP can overcome this problem. This paper presents test results of 25 circular RC columns strengthened with pre-stressed FRP strips under low cyclic loading. The pre-stressing of the FRP strips, types of FRP strips and longitudinal reinforcement, axial load ratio, pre-damage degree and surface treatments of the specimens are considered as the primary factors in the tests. According to the failure modes and hysteresis curves of the specimens, these factors are analyzed to investigate their effect on bearing capacity, ductility, hysteretic behavior, energy dissipation capacity and other important seismic behaviors. The results show that the initial lateral confined stress provided by pre-stressed FRP strips can effectively inhibit the emergence and development of diagonal shear cracks, and change the failure modes of specimens from brittle shear failure to bending or bending-shear failure with better ductility. As a result, the bearing capacity, ductility, energy dissipation capacity and deformation capacity of the strengthened specimens are all significantly improved.