Present-day Block Movement and Fault Activity on the Eastern Margin of the Tibetan Plateau

The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are（17.02±0.60） mm/a,（8.77±1.51） mm/a,（13.85±1.31） mm/a and（6.84 ± 0.74） mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are（7.30±1.25–8.30±1.26） mm/a,（10.07±0.97–11.79±0.89） mm/a,（0.96±0.74–2.98±1.73） mm/a,（2.03±0.49–3.20±0.73） mm/a,（3.45±0.40–6.02±0.50） mm/a and（6.23±0.56） mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.

Lateral migration of fault activity in Weihe basin

Lateral migration of fault activity in Weihe basin is a popular phenomenon and its characteristics are also typical. Taking the activity migrations of Wangshun Mountain piedmont fault toward Lishan piedmont fault and Weinan platform front fault, Dabaopi-Niujiaojian fault toward Shenyusi-Xiaojiazhai fault, among a serial of NE-trending faults from Baoji city to Jingyang County as examples, their migration time and process are analyzed and discussed in the present paper. It is useful for further understanding the structure development and physiognomy evolution history of Weihe basin.

Discussion of the Horizontal Intensity of Late Quaternary Fault Activity Along the Tianjingshan Fault Zone in Different Time Intervals and Fault Segments

By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.

Fission Track Method to Date Fault Activity—As Exemplified by the Three Gorges Dam Area of the Yangtze River Valley, China

The Xiannushan and Jiuwanxi are the two major fracture belts adjacent to the Three Gorges Dam Site. Apatites are selected from fracture clay and fracture\|cliff rock in the fracture belts and examined with the fission track dating method. Our study shows that the Xiannushan and Jiuwanxi fracture belts were tectonically active at 0.60±0.04Ma and 0.29±0.04Ma ago, respectively. Their ages are close to those obtained by the U\|series method.

Numerical modeling of tectonic stress field and fault activity in North China

On the basis of a 3-dimension visco-elastic finite element model of lithosphere in North China, we numerically simulate the recent mutative figures of tectonic stress field. Annual change characteristics of stress field are： 1 ） Maximum principal tensile stress is about 3 -9 kPaa-1 and its azimuth lie in NNW-SSE. 2） Maximum principal compressive stress is about 1 - 6 kPaa-1 and its azimuth lie in NEE-SWW. 3 ） Maximum principal tensile stress is higher both in the west region and Liaoning Province. 4） Variation of tectonic stress field benefits fault movement in the west part and northeast part of North China. 5 ）Annual accumulative rates of Coulomb fracture stress in Tanlu fault belt have segmentation patterns： Jiashan-Guangji segment is the high- est （6 kPaa - 1 ） , Anshan-Liaodongwan segment is the second （5 kPaa - l ） , and others are relatively lower （ 3 - 4 kPaa-1 ）.

Formation mechanism of fault accommodation zones under combined stress in graben basin:Implications from geomechanical modeling

A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.

Dynamic response of mountain tunnel,bridge,and embankment along the Sichuan-Tibet transportation corridor to active fault based on model tests

The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Tibet transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Tibet transportation corridor.

Responses of Stream Geomorphic Indices to Piedmont Fault Activity in the Daqingshan Area of China

A recent correlation of stream geomorphic indices to fault activity has revealed that stream geomorphologies in bedrock mountain areas are good records of local fault movements. The Daqingshan piedmont fault is one of the main active faults in the fault system on the northern margin of the Hetao Basin and has produced frequent large-scale earthquakes since the Late Pleistocene. In the present study, following the segmentation regime of previous studies, we divide the fault zone into five segments, namely, the Baotou, Tuyouqi West, Tuzuoqi West, Bikeqi, and Hohhot segments, and we discuss the relationship between the drainage basin geomorphology and the piedmont fault activity in the Daqingshan area using 30 m spatial resolution Shuttle Radar Topography Mission(SRTM) digital elevation model(DEM) data. We use a range of geomorphic indices to examine the drainage basins in the Daqingshan area, including the channel steepness index(ksn), slope, hypsometric integral(HI), relief degree of land surface(RDLS), and stream lengthgradient index(SL), extracted with ArcGIS and MATLAB, and we also consider local lithologic and climate aspects. Furthermore, we compare the geomorphic indices with the slip rates of individual segments of the Daqingshan piedmont fault and paleoseismic data. The results show that the geomorphic indices of drainage basins in the Daqingshan area are primarily affected by the piedmont fault activity in the Daqingshan area. The geomorphic indices also demonstrate that piedmont fault activity has been the most intense in the middle segment of this fault system since the Late Quaternary and decreases towards the two sides.

The historic evolution of Zhouyuan and the newest activity of the great Wei River fault

The rate of vertical differential movement of the great Weihe fault (west segment) in different periods is analyzed by using the data of the historic evolution of the Zhouyuan plateau surface. Results show that the rate reached a maximum in the Ming Dynasty, about 6. 4 mm/a, which corresponded well to the period of strongearthquake on the Wei River fault in the 15-16th centuries. Based on such a correspondence, the time separation between active periods of Ms=8. 0 strong earthquakes in the Wei River fault depression is investigated.

Main active faults and seismic activity along the Yangtze River Economic Belt:Based on remote sensing geological survey

The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Active faults and seismic activity are important geological factors for the planning and development of the YREB.In this paper,the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings,using both remote-sensing data and geological survey results.The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed.The main active fault zones in the western YREB,together with the neighboring regional active faults,make up an arc fault block region comprising primarily of Sichuan-Yunnan and a“Sichuan-Yunnan arc rotational-shear active tectonic system”strong deformation region that features rotation,shear and extensional deformation.The active faults in the central-eastern YREB,with seven NE-NNE and seven NW-NWW active faults(the“7-longitudinal,7-horizontal”pattern),macroscopically make up a“chessboard tectonic system”medium-weak deformation region in the geomechanical tectonic system.They are also the main geological constraints for the crustal stability of the YREB.

The neotectonic deformation and earthquake activity in Zhuanglang river active fault zone of Lanzhou

Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China

New Discovery of Holocene Activity along the Weixi-Qiaohou Fault in Southeastern Margin of the Tibetan Plateau and its Neotectonic Significance

Objective The lateral extrusion eastward of the Tibetan Plateau leads to the formation of the Sichuan–Yunnan block, which is the most representative active block in the southeastern margin of the Tibetan Plateau, characterized by strong and frequent seismicity(Li Ping et al., 1975; Zhang Peizhen et al., 2003; Li Yong et al., 2017). Its eastern boundary is composed of sinistral faults including the Xianshuihe, Xiaojiang faults, etc., and the western

Sliding modes of fault activation under constant normal stiffness conditions

Fault activation has been the focus of research community for years.However,the studies of fault activation remain immature,such as the fault activation mode and its major factors under constant normal stiffness(CNS)conditions associated with large thickness of fault surrounding rock mass.In this study,the rock friction experiments were conducted to understand the fault activation modes under the CNS conditions.Two major parameters,i.e.the initial normal stress and loading rate,were considered and calibrated in the tests.To reveal the response mechanism of fault activation,the local strains near the fault plane were recorded,and the macroscopic stresses and displacements were analyzed.The testing results show that the effect of displacement-controlled loading rate is more pronounced under the CNS conditions than that under constant normal load(CNL)conditions.Both the normal and shear stresses drop suddenly when the stick-slip occurs.The decrease and increase of the normal stress are synchronous with the shear stress in the regular stick-slip scenario,but mismatch with the shear stress during the chaotic stick-slip process.The results are helpful for understanding the fault sliding mode and the prediction and prevention of fault slip.

Seismic activity and active faults in Huailai basin

ＳｅｉｓｍｉｃａｃｔｉｖｉｔｙａｎｄａｃｔｉｖｅｆａｕｌｔｓｉｎＨｕａｉｌａｉｂａｓｉｎＰＥＩＤＥＷＡＮＧ（王培德）ＹＵＨＯＮＧＴＩＡＮ（田玉红）ＣＨＵＮＬＡＩＬＩ（李春来）ＹＵＮＴＡＩＣＨＥＮ（陈运泰）ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｐｈｙｓ...

Late Quaternary Geomorphology of the Tonami Plain and Activity of the Tonami-Heiya Fault Zone, Toyama Prefecture, Central Japan

The Holocene alluvial fans and flood plains formed by the Sho and Oyabe Rivers spread out in the Tonami plain from the central through the northern parts in the Toyama Prefecture, central Japan. Along the foot of the surrounding mountains and hills, higher, middle and lower terraces of late Pleistocene-Holocene in age are distributed. These terraces have been displaced, by the reverse dip-slip activities of Tonami-heiya fault zone in a sense of upheaval in the mountains side, even during the Holocene time. We examined stratigraphic cross section utilizing borehole data and geomorphologically analyzed 5 m-DEM data in order to elucidate the fault trace of the Isurugi fault which Tonami-heiya fault zone. As the results, the northern segment of Isurugi fault seems to run along the northeastern foot of Hodatsu Hills and extends underground through the lower-most Oyabe River into the Toyama Bay. Consequently, its total length reaches about 30 km. In the southern segment, a continuous fault scarplet was recognized to cut across the lower dissected fans. The slip-rate of Isurugi fault is estimated to be 0.31 - 0.64 m/kyr. In the Hokuriku region, reverse faulting and related folding with strike in a NE-SW direction have occurred during the late Quaternary. The hinge line of block movement due to the activities of the Tonami-heiya fault zone is revealed to have shifted from the mountain side into the plain side within the Holocene time. In conclusion, the Quaternary folding and faulting associated with the crustal warping at a wavelength of about 20 km is currently in progress, causing both the subsidence of Tonami plain and the upheaval of surrounding mountains and hills.

Features of the fault system and its relationship with migration and accumulation of hydrocarbon in Liaodong Bay

The fault system of Liaodong Bay developed extensively under the control of the Tanlu Fault. The fault system can be grouped into strike-slip faults of grade Ⅰ, trunk faults of grade Ⅱand branch faults （induced faults） of grade Ⅲ respectively based on its developmental scale. The faults of grade Ⅰ and Ⅱwere deep, early and large while the faults of grade Ⅲwere shallow, late and small. The formation, evolution and distribution features played a significant role in controlling the migration of oil and gas in both horizontal and vertical directions. The fluid transfer in the fault system occurred in the process of faulting. The strike-slip and trunk faults moved actively forming predominant pathways for oil and gas migration. The branch faults, with weak activity, generally controlled the development of traps and were beneficial for the accumulation and preservation of oil and gas. The faults of grade Ⅰ and Ⅱ formed the major migration pathways for oil and gas, but their fault activity rates appeared to vary along their strikes. The zones with a relatively low fault activity rate might be favorable for oil and gas accumulation. When the activities of strike-slip, trunk, and branch faults came to a halt, the fault seal behavior had a vitally important effect on the accumulation of oil and gas. The controlling role of the fault over fluid distribution was further analyzed by calculating the fault activity quantitatively.

Shallow crustal velocity structures revealed by active source tomography and fault activities of the Mianning–Xichang segment of the Anninghe fault zone, Southwest China

The Anninghe fault is a large left-lateral strike-slip fault in southwestern China. It has controlled deposition and magmatic activities since the Proterozoic, and seismic activity occurs frequently. The Mianning-Xichang segment of the Anninghe fault is a seismic gap that has been locked by high stress. Many studies suggest that this segment has great potential for large earthquakes(magnitude >7). We obtained three vertical velocity profiles of the Anninghe fault(between Mianning and Xichang) based on the inversion of P-wave first arrival times. The travel time data were picked from seismograms generated by methane gaseous sources and recorded by three linearly distributed across-fault dense arrays. The inversion results show that the P-wave velocity structures at depths of 0-2 km corresponds well with the local lithology. The Quaternary sediments have low seismic velocities, whereas the igneous rocks,metamorphic rocks, and bedrock have high seismic velocities. We then further discuss the fault activities of the two fault branches of the Anninghe fault in the study region based on small earthquakes(magnitudes between ML 0.5 and ML 2.5) detected by the Xichang array.The eastern fault branch is more active than the western branch and that the fault activities in the eastern branch are different in the northern and southern segments at the border of 28°21′N. The high-resolution models obtained are essential for future earthquake rupture simulations and hazard assessments of the Anninghe fault zone. Future studies of velocity models at greater depths may further explain the complex fault activities in the study region.

Representative value of cross-fault in the northeastern margin of the Qinghai-Tibet block and case analysis of the 2016 Menyuan Ms6.4 earthquake

The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.

Reexamining the Seismological Implications of the Present-day Stress State of the Yingxiu-Beichuan Fault after the Wenchuan Earthquake

The present-day stress state of the Yingxiu-Beichuan fault after the Wenchuan earthquake was re-estimated using measured in-situ stress data obtained after the Wenchuan earthquake. The results reveal that the gradient coefficients of principal stresses versus depth decrease from south to north along the Yingxiu-Beichuan fault, revealing that the stress level decreases from south to north. The consistency between the present-day stress levels and surface ruptures generated during the earthquake indicates that the accumulated tectonic stress beneath the Yingxiu-Beichuan fault before the Wenchuan earthquake was relieved in form of surface ruptures. This resulted in the stress remaining high in the southern section of the Yingxiu-Beichuan fault but relatively low in the northern section. Abnormal high pore pressure conditions and an extremely low frictional coefficient play important role in the interpretation of the stress field adjustment and seismic events observed after the Wenchuan earthquake along this fault, according to the estimation results using the Coulomb frictional-failure theory incorporating frictional coefficients ranging from 0.4 to 1.0. To accurately estimate the seismological hazard of the Yingxiu-Beichuan fault by analyzing fault instability using the Coulomb frictional-failure theory, much attention should be focused on the pore pressure conditions and the evolution state of the frictional coefficient under the present-day stress state.

Adaptability of ESR dating of fault gouge in aseismic region:A case study on Hangzhou region, China

ESR dating has been widely used in seismic assessment. In this paper, we collected fault gouge samples systematically for ESR (Electron Spin Resonance) dating, and sediment samples of overlying strata, and offset strata for OSL (Optically Stimulated Luminescence) dating along Xiaoshan-Qiuchuan fault (XQF) trending NE-SW, Xiaofeng-Sanmen fault (XSF) trending NW-SE, and Changhua-Putuo fault (CPF) trending E-W. In the same fault outcrop, the ESR data of fault gouge is greater than the OSL data of the strata offset by fault. Therefore, the ESR data of fault gouge colleted in Hangzhou region do not represent the time of weak fault movement in Late Quaternary region, but represent the strong fault movements in Late Cenozoic. The episode of fault movement in Late Cenozoic could be speculated according to the ESR data: 1.000.58 Ma, there were strong fault movements along the XSF, XQF and CPF in Hangzhou region; 0.580.45 Ma, the fault movements of all faults became weaker and did not zero ESR signals significantly for ESR dating of fault movements; 0.450.20 Ma, there were strong fault movements along part of XQF; 0.10.01 Ma, there were fault movements along the XSF only, but the fault movements were not strong enough to reset the ESR signal; Since 0.01 Ma, the Hangzhou region tends to be stable. In addition, the XSF might be the division line of fault segmentation of XQF; there were strong fault movements along the southwest segment of XQF during 0.45 Ma to 0.20 Ma; while the fault movements along the northeast segment of XQF mainly occurred during 1.000.58 Ma.