Bio-inspired Hydroxyapatite/Gelatin Transparent Nanocomposites

Hydroxyapatite(HA)nanoparticles impart outstanding mechanical properties to organicinorganic nanocomposites in bone.Inspired by the composite structure of HA nanoparticles and collagen in bone,a high performance HA/gelatin nanocomposite was first developed.The nanocomposites have much better mechanical properties(elongation at break 29.9%,tensile strength 90.7 MPa,Young’s modulus 5.24 GPa)than pure gelatin films(elongation at break 9.3%,tensile strength 90.8 MPa,Young’s modulus 2.5 GPa).In addition,the composite films keep a high transmittance in visible wavelength range from 0%to 60%of the HA solid content.These differences in properties are attributed to the homogeneous distribution of HA nanoparticles in the gelatin polymer matrix and the strong interaction between the particle surfaces and the gelatin molecules.This protocol should be promising for HA-based nanocomposites with enhanced mechanical properties for biomedical applications.

Ionic liquid-assisted preparation of hydroxyapatite and its catalytic performance for decarboxylation of itaconic acid

The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic performance.The results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of hydroxyapatite.The[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of hydroxyapatite.High fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of hydroxyapatite.The hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic performance.The suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.

Azoximer bromide and hydroxyapatite:promising immune adjuvants in cancer

Immune adjuvants are immune modulators that have been developed in the context of infectious vaccinations.There is currently a growing interest in immune adjuvants due to the development of immunotherapy against cancers.Immune adjuvant mechanisms of action are focused on the initiation and amplification of the inflammatory response leading to the innate immune response,followed by the adaptive immune response.The main activity lies in the support of antigen presentation and the maturation and functions of dendritic cells.Most immune adjuvants are associated with a vaccine or incorporated into the new generation of m RNA vaccines.Few immune adjuvants are used as drugs.Hydroxyapatite(HA)ceramics and azoximer bromide(AZB)are overlooked molecules that were used in early clinical trials,which demonstrated clinical efficacy and excellent tolerance profiles.HA combined in an autologous vaccine was previously developed in the veterinary field for use in canine spontaneous lymphomas.AZB,an original immune modulator derived from a class of heterochain aliphatic polyamines that is licensed in Russia,the Commonwealth of Independent States,and Slovakia for infectious and inflammatory diseases,is and now being developed for use in cancer with promising results.These two immune adjuvants can be combined in various immunotherapy strategies.

Hydroxyapatite-containing PEO-coating design for biodegradable Mg-0.8Ca alloy: Formation and corrosion behaviour

In this study, the biocompatible protective coating was formed using plasma electrolytic oxidation(PEO) on bioresorbable Mg-0.8Ca alloy. The composition of the formed coating was studied using XRD, SEM-EDX analysis, and micro-Raman spectroscopy. The uniform distribution of hydroxyapatite over the thickness of protective PEO-layer was established. Using traditional(EIS, PDP, OCP) and local scanning electrochemical methods(SVET, SIET with H^(+)-selective microelectrode), the level of protective properties of PEO-layer in a biological environment(mammalian cell culture medium, MEM) was determined. It was established that modification of Mg-0.8Ca alloy surface by PEO contributes to a significant increase in the corrosion resistance of the surface layer, making it possible to control the process of material‘s biodegradation. The maximum local electrochemical activity was recorded after 72 h of testing, while for the uncoated sample,intense corrosion degradation was recorded in the first 12 min of exposure to the cell culture medium. Formation of the PEO-coating results in a twofold decrease in the corrosion current density(2.8·10^(-6)A cm^(-2)) and an increase in the impedance modulus measured at a low frequency(1.7·10^(4)Ω cm^(2)) in comparison with the uncoated material(9.5·10^(-6)A cm^(-2);8.1·10^(3)Ω cm^(2)). The mechanism of material bioresorption was established and a model for biodegradation process of Mg-0.8Ca alloy with hydroxyapatite-containing PEO-coating in MEM was proposed. Analysis of these results and comparing with others obtained by various scientific groups indicate the prospects for application of biocompatible PEO-coating on Mg-Ca alloy in implant surgery.

Influence of Ca/P ratio on the catalytic performance of hydroxyapatite for decarboxylation of itaconic acid to methacrylic acid

Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.

Corrosion behavior of composite coatings containing hydroxyapatite particles on Mg alloys by plasma electrolytic oxidation: A review

Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their susceptibility to rapid corrosion within the body poses a significant challenge and restricts their applications. To overcome this issue, various surface modification techniques have been developed to enhance the corrosion resistance and bioactivity of Mg-based implants. PEO is a potent technique for producing an oxide film on a surface that significantly minimizes the tendency to corrode. However, the inevitable defects due to discharges and poor biological activity during the coating process remain a concern. Therefore, adding suitable particles during the coating process is a suitable solution. Hydroxyapatite(HAp)has attracted much attention in the development of biomedical applications in the scientific community. HAp shows excellent biocompatibility due to its similarity in chemical composition to the mineral portion of bone. Therefore, its combination with Mg-based implants through PEO has shown significant improvements in their corrosion resistance and bioactivity. This review paper provides a comprehensive overview of the recent advances in the preparation, characterization, corrosion behavior and bioactivity applications of HAp particles on Mg-based implants by PEO.

Investigation of the Nd-Ce-Mg-Zn/Substituted Hydroxyapatite Effect on Biological Properties and Osteosarcoma Cells

Cancerous diseases and diseases resulting from bacteria and fungi are some of the pressures that humans face.Therefore,the development of biomaterials that are resistant to cancerous diseases,bacteria,and fungi has become one of the requirements of the medical field to extend the life of the biomaterial and fight pathogens after implanting these materials inside the human body.One of the important biomaterials used in the field of orthopedics is hydroxyapatite.In this research,Nano substituted hydroxyapatite was prepared by the wet precipitation method,including replacing 5%of the calcium ions with neodymium,cerium,magnesium,and zinc ions in cationic substitution.Many tests were carried out to characterize the prepared material.The biological properties were evaluated by examining the resistance of the substituted hydroxyapatite to bacteria and fungi,in addition to testing the effect of the material on normal cells and bone cancer cells.The results showed a new structure of hydroxyapatite after the substitution process and a significant improvement in the biological properties of the prepared biomaterial compared to other researches.

The fabrication of hydroxyapatite mineralized hydrogels for bone tissue engineering

Bone is a complex but orderly mineralized tissue with hydroxyapatite(HA)as the inorganic phase and collagen as the organic phase.Inspired by natural bone tissues,HA-mineralized hydrogels have been widely designed and used in bone tissue engineering.HA is majorly utilized for the treatment of bone defects because of its excellent osteoconduction and bone inductivity.Hydrogel is a three-dimensional hydrophilic network structure with similar properties to the extracellular matrix(ECM).The combination of HA and hydrogels produces a new hybrid material that could effectively promote osteointegration and accelerate the healing of bone defects.In this review,the structure and growth of bone and the common strategies used to prepare HA were briefly introduced.Importantly,we discussed the fabrication of HA mineralized hydrogels from simple blending to in situ mineralization.We hope this review can provide a reference for the development of bone repair hydrogels.

Effects of Pb^(2+), Cd^(2+) and Cu^(2+) on the Aqueous Zn^(2+) Sorption by Hydroxyapatite

In this paper, the behaviors of aqueous zinc sorption by hydroxyapatite in the co-existence of Pb^2＋, Cd^2＋ and Cu^2＋ are investigated, the effects of Pb^2＋, Cd^2＋ and Cu^2＋ on the sorption of Zn^2＋ are discussed, and the hydroxyapatite sorption capabilities for Pb^2＋, Cd^2＋, Cu^2＋ and Zn^2＋ are compared. The experimental results show that the Zn^2＋ removal efficiency decreases gradually with the increase of the Cd^2＋ concentration of the solution, and there is no sorption preference between Cd^2＋ and Zn^2＋. On the other hand, the Zn^2＋ removal efficiency rapidly decreases rapidly with the increase of the Cu^2＋ concentration of the solution, and there is a clear sorption preference between Cu^2＋ and Zn^2＋. It is noticed that the Zn^2＋ removal efficiency is hardly changed with the variance of Pb^2＋ concentration because the removal mechanisms for these two ions are totally different. It is concluded that the adsorption affinities of the heavy metals for the hydroxyapatite follows this sequence： pb^2＋〉 Cu^2＋〉 Cd^2＋〉 Zn^2＋.

Preparation of Hydroxyapatite Cement and Analysis as of its Disposition

Objective: To prepare hydroxyapatite cement (or calcium phosphate cement, CPC) and analyze its capability. Methods: Tetracalcium phosphate (TTCP) was prepared by the method of high heat. TTCP reacted with in simulated body situation and produced CPC, Its capability was analyzed by scanning electron microscopy (SEM) , X-ray diffraction(XRD). Its density, absorbing water coefficient, macroporosity and campressive strength were measured also. Results: The main element of CPC is hydroxyapatite (HA) , its microstructure comprised of needlelike or petal crystals. The diameter of micropore was 4-10 nm, density was 1.922 g/cm3, macroporosity was 29. 777% , absorbing coefficient was 15. 503%, compressive strength was 42. 70 Mpa. Conclusion: This CPC has three-dimensional spatial structure, its strength meets the need of cancellous bone grafting.

Biologically Inspired Self-assembling Synthesis of Bone-like Nano-hydroxyapatite/PLGA-(PEG-ASP)_n Composite: A New Biomimetic Bone Tissue Engineering Scaffold Material

A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide（ DLLA） and glycolide（ GA ） with Aspartic acid （ Asp ）-Polyethylene glycol（PEG） alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-（ PEG- Asp）n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid （naSBF）. Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- （ PEG-Asp ）n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- （ PEG-Asp ） n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-（ PEG- Asp ）n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.

Cytotoxinic Mechanism of Hydroxyapatite Nanoparticles on Human Hepatoma Cell Lines

Stable and single dispersed HAP nanoparticles were synthesized with chemical method assisted by ultrasonic treatment.HAP nanoparticles were surveyed by AFM and Zataplus.The effect on the Bel-7402 human hepatoma cell lines treated with HAP nanoparticles was investigated by the MTT methods and observation of morphology,and the mechanism was studied in changes of cell cycle and ultrastructure.The result shows that inhibition of HAP nanoparticles on the Bel 7402 human hepatoma cell lines is obviously in vitro.HAP nanoparticles the entered cancer cytoplasm,and cell proliferation is stopped at G 1 phase of cell cycle,thus,cancer cells die directly.

Preparation, Characterization and Antibacterial Property of Cerium Substituted Hydroxyapatite Nanoparticles

Nanoparticles of hydroxyapatite （HAP） and cerium substituted hydroxyapatite （CeHAP） with the atomic ratio of Ce/[ Ca ＋ Ce] （xco） from 0 to 0.2 were prepared by sol-gel-supercritical fluid drying （SCFD） method. The nanoparticles were characterized by TEM, XRD, and FT-IR, and the effects of cerium on crystal structure, crystallinity, and particle shape were discussed. With the tests of bacterial inhibition zone and antibacterial ratio, the antibacterial property of HAP and CeHAP nanoparticles on Escherichia coli, Staphylococcus aureus, Lactobacillus were researched. Results showed that the nanoparticles of HAP and CeHAP could be made by sol-gel-SCFD, cerium could partially substitute for calcium and enter the structure of HAP. After substitution, the crystallinity, the IR wavenumbers of bonds in CeHAP decreased gradually with increase of cerium substitution, and the morphology of the nanoparticles changed from the short rod-shaped HAP to the needle-shaped CeHAP. The nanoparticles of HAP and CeHAP with Xco below 0.08 had antibacterial property only forcibly contacting with the test bacteria at the test concentration of 0.1 g · mi^-1, however, the Ce- HAP nanoparticles had antibacterial ability at that concentration no matter statically or dynamically contacting with the test bacteria when Xco was above 0.08, and the antibacterial ability gets better with the increase Of Xce, indicating that the antibacterial property was improved after calcium was partially substituted by cerium. The improved antibacterial effects of CeHAP nanoparticle on Lactobacillus showed its potential ability to anticaries.

Improving the Corrosion Resistance of ZEK100 Magnesium Alloy by Combining High-Pressure Torsion Technology with Hydroxyapatite Coating

Recently,magnesium and its alloys have attracted more and more attention as promising implant materials due to their excellent properties such as good biocompatibility,biodegradation,non-toxicity and comparable mechanical properties with natural bone.They can be gradually degraded and absorbed so as to avoid the second surgery for implants removal after the tissues are healed completely.In addition,they are also able to prevent the stress shielding effect in human body environment because of the density,elastic modulus and yield strength of magnesium closer to the bone.Unfortunately,the high corrosion rate which causes early mechanical failure of the implants in physiological environment limits the widespread use of magnesium alloys for clinical application in biology.And the high corrosion process usually causes huge hydrogen evolution and alkalinization,resulting in problems against the implants as well as the surrounding tissues.In order to enhance the corrosion resistance of magnesium alloys,in this study,the ZEK100 magnesium alloy was pre-deformed with a highpressure torsion(HPT)process and then fabricated hydroxyapatite(HA)coatings with different contents of Mg(OH)2 nanopowder via hydrothermal method.The specimens were characterized by scanning electron microscope(SEM)and X-ray diffraction(XRD).At the same time,prior and after the HPT procedure,the metallography,microhardness and tensile tests of specimens were characterized.Meanwhile,the corrosion behavior of the specimens was evaluated by electrochemical impedance spectroscopy(EIS)and hydrogen evolution tests.And the interface bonding strength of the HA coating on the magnesium alloy substrate was evaluated by a tape adhesion test/scratch test.Results showed that HPT processing refined the grain size and introduced a great number of twins,resulting in the enhancement of microhardness and Young’s modulus of ZEK100 magnesium alloy,but hardness values at the edge were higher than those at the center due to the uneven shear strain.At the same conditions,the HA coating on HPT-ZEK was denser,thicker than that on ZEK sample and the crystal sizes of HA were smaller on HPT-ZEK.These were attributed to fine,uniform distributed secondary phases and lots of fine grains,twins,grain boundaries in HPT-ZEK substrates which can provide more nucleation sites for the HA crystal.In terms of the amount of Mg(OH)2 nanopowder,Mg(OH)2 nanopowder significantly influenced the microstructure and thickness of the HA coating.And at a 0.3 mg/mL content of Mg(OH)2 nanopowder,there was the densest,thickest HA coating on magnesium alloys,and the crystal size of HA was minimum.Specifically,the HA coating thickness on ZEK-03(0.3 mg/mL Mg(OH)2 nanopowder)was 1.8 times of that on ZEK-00(0 mg/mL Mg(OH)2 nanopowder),while the HA coating thickness on HPT-03 was 2.6 times of that on ZEK-00.And the adhesion strength of HA coating on HPT-03 substrate was better than that on ZEK-03.In addition,HPT technology and surface modification by HA coating simultaneously increased the corrosion resistance of ZEK100 magnesium alloy and the corrosion of HPT-ZEK samples occurred in a more uniform manner,while it was pitting on the surface of ZEK100 magnesium alloy.Therefore,there was the best corrosion resistance on HPT-03 sample,which could promote the application of magnesium alloys in biomedical fields.

Adsorption of Disperse Blue SBL dye by synthesized poorly crystalline hydroxyapatite

The present study has been undertaken to evaluate the adsorption in batch mode of a disperse dye (Disperse Blue SBL) by poorly crystalline hydroxyapatite synthesized by coprecipitation between Ca(NO3)2and (NH4)2HPO4 reagents in aqueous solution at room temperature. The adsorption experiments were carried out to investigate the factors that influence the dye uptake by the adsorbent, such as the contact time under agitation, adsorbent dosage, initial dye concentration, solution temperature, and pH. The experimental results show that the percentage of dye removal increases with increasing the amount of adsorbent, until the total discoloration. The adsorption isotherms follow the model of Langmuir with a high adsorption capacity. The adsorption was pH and temperature dependent.

Advances in hydroxyapatite coatings on biodegradable magnesium and its alloys

Magnesium is a candidate metal for biodegradable implant applications for its biodegradation tendency and excellent biocompatibility.Unfortunately,the high degradation rate of magnesium and also its localized degradation in physiological conditions are the main issues for its successful implant applications.The degradation rate of magnesium has been reduced to some degree via alloying,but the localized degradation susceptibility is a great concern.For many years,hydroxyapatite(HAp),a biocompatible ceramic material,has been extensively used for bio-implant applications.Recently,a substantial amount of research has been carried out on coating HAp on magnesium-based materials for improved degradation resistance in particular and also to enhance the biocompatibility.This review article focuses on the different methods of HAp coating on magnesium-based materials and also the recent cutting-edge advancements made in the coating process for improved degradation resistance and biocompatibility.The mechanical stability of the HAp coated magnesium-based materials is also discussed.

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite/Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2·4H2O and PO(OH)K(OEt)3-x. were selected as precursors, and hexafluorophosphoric acid (HPF6) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPF6 to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.

Hydroxyapatite Bioceramic Coatings Prepared by Hydrothermal-electrochemical Deposition Method

The hydroxyapatite（HA） ceramic coating was successfully prepared on Ti6A14V alloy by the hydrothermal-electrochemical deposition method with constant voltage model. The phases of deposits were analyzed by X-ray diffraction. The releationship between crystallinity and depositing temperature was discussed. The microstructures of hydroxyapatite coating were observed by scanning electron microscope. The experimental results showed that the phases, crystaUinity and morphologies of deposits were influenced by depositing temperature （100℃, 120℃, 140℃, 160℃, 180℃ and 200℃, respectively）. The special hydrothermal environment can lower the crystallization temperature of HA. The crystallinity of HA increases firstly and then decreases with the increase of temperature. There is little hydroxyapatite deposited on the Ti6A14V surface when the depositing temperature is 100℃. The HA deposition increases with the increase of the depositing temperature. And the HA morphologies are influenced by the depositing temperature.

A bifunctional bone scaffold combines osteogenesis and antibacterial activity via in situ grown hydroxyapatite and silver nanoparticles

Hydroxyapatite(HA)nanoparticles and silver(Ag)nanoparticles are expected to enable desirable bioactivity and antibac-terial properties on biopolymer scaffolds.Nevertheless,interfacial adhesion between HA/Ag and the biopolymer is poor due to the large physicochemical differences between these components.In this study,poly L-lactic acid(PLLA)powder was first surface-modified with bioactive polydopamine(PDA)in an alkaline environment.Next,HA and Ag nanoparticles were grown in situ on the PDA-coated PLLA powder,which was then adhered to the porous bone scaffold using a selective laser-sintering process.Results showed that HA and Ag nanoparticles were homogenously distributed in the matrix,with enhanced mechanical properties.Simulated body fluid bioactivity tests showed that the in situ grown HA-endowed scaffold shows excellent bioactivity.In vitro tests confirmed that the scaffold exhibits favorable biocompatibility with human umbilical cord mesenchymal stem cells,as well as strong antibacterial activity against Gram-negative Escherichia coli.Furthermore,in vivo assays indicated that the scaffold promoted bone generation,with a new bone area fraction of 71.8%after 8 weeks’implantation,without inflammation.

Glycerol steam reforming over calcium hydroxyapatite supported cobalt and cobalt-cerium catalysts

Calcium hydroxyapatite（HAp） supported cobalt and cobalt-cerium catalysts were examined for hydrogen production in glycerol steam reforming. The catalysts were synthesized by incipient wetness impregnation method and characterized through X-ray diffraction, adsorption-desorption isotherms of N2 and temperature-programmed reduction of H2. Catalytic properties were examined in terms of glycerol conversion, selectivity toward hydrogen and C-containing products in temperature range of 650-800 ℃.The effect of active metal reduction and residence time（thereby flow feed rate） was analysed. It was found that the growth of residence time increased the hydrogen selectivity in the whole temperatures range whereas the catalyst reduction, before the catalytic process, decreased the hydrogen selectivity at temperatures lower than 750 ℃. The cerium addition improved the catalytic behaviour for hydrogen production via glycerol steam reforming. Cerium oxide suppressed the sintering of cobalt particles and as a result Co-Ce/HAp ensured higher stability and H2 selectivity than Co/HAp. Under reaction conditions investigated in this study, the highest selectivity toward hydrogen at 650 ℃ was obtained for 7.5 Co-Ce/HAp catalyst.