The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and...The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.展开更多
When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designe...When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designed. This research paper and case study will help a lot to avoid shadow, especially when selecting inter-row spacing between the strings of solar power plants.展开更多
Genetic relationships of eight species of genus Betula were evaluated using ISSR marks. A total of 236 loci were generated from 17 ISSR primers. Percentage of polymorphic bands (PPB) varied from 5.93 to 19.92. The hig...Genetic relationships of eight species of genus Betula were evaluated using ISSR marks. A total of 236 loci were generated from 17 ISSR primers. Percentage of polymorphic bands (PPB) varied from 5.93 to 19.92. The highest and the lowest level of genetic differentiation were detected in B. ovalifolia and B. maximowicziana Regel respectively. In these eight species, genetic diversity of birch (HT) was 24.38 %, and the genetic variation (GST ) interspecies was accounting for 79.36% of total genetic variation. According to the cluster results of genetic distance, the eight species were classified into three groups as B. davurica, B. ovalifolia, B. platyphylla and B. pendula for one group; B. schmidtii, B. costata and B. ermanii Cham. var. communis for one group, and B. maximowicziana Regel for another group. The result of cluster is consistent with traditional morphological classification.展开更多
文摘The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.
文摘When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designed. This research paper and case study will help a lot to avoid shadow, especially when selecting inter-row spacing between the strings of solar power plants.
文摘目的比较Inter Tan和PFNA两种方法治疗老年股骨粗隆间骨折加压固定后的加压效果。方法 59例老年股骨粗隆间骨折患者随机分为2组,分别给予Inter Tan(n=39例)和PFNA(n=20例)治疗,X线随访2组患者术前、术后即时、术后4周和术后24周时骨折分离距离。结果 Inter Tan和PFNA两种方法治疗患者术前、术后即时和术后24周时骨折分离距离差异均无统计学意义(P>0.05),但是在术后4周时发现PFNA组有20.0%患者有骨折线增宽表现,而Inter Tan组仅为5.1%,组间比较差异有统计学意义(P<0.05)。结论 Inter Tan固定系统由于具有双螺钉交锁加压作用,在粗隆间骨折患者骨折复位后二次加压及持续维持加压作用方面,优于PFNA固定系统。
基金This paper was supported by Northeast Forestry University.
文摘Genetic relationships of eight species of genus Betula were evaluated using ISSR marks. A total of 236 loci were generated from 17 ISSR primers. Percentage of polymorphic bands (PPB) varied from 5.93 to 19.92. The highest and the lowest level of genetic differentiation were detected in B. ovalifolia and B. maximowicziana Regel respectively. In these eight species, genetic diversity of birch (HT) was 24.38 %, and the genetic variation (GST ) interspecies was accounting for 79.36% of total genetic variation. According to the cluster results of genetic distance, the eight species were classified into three groups as B. davurica, B. ovalifolia, B. platyphylla and B. pendula for one group; B. schmidtii, B. costata and B. ermanii Cham. var. communis for one group, and B. maximowicziana Regel for another group. The result of cluster is consistent with traditional morphological classification.
