New Insights into Microplastic Contamination in Different Types of Leachates: Abundances, Characteristics, and Potential Sources

Municipal solid waste(MSW)is an important destination for abandoned plastics.During the waste disposal process,large plastic debris is broken down into microplastics(MPs)and released into the leachate.However,current research only focuses on landfill leachates,and the occurrence of MPs in other leachates has not been studied.Therefore,herein,the abundance and characteristics of MPs in three types of leachates,namely,landfill leachate,residual waste leachate,and household food waste leachate,were studied,all leachates were collected from the largest waste disposal center in China.The results showed that the average MP abundances in the different types of leachates ranged from(129±54)to(1288±184)MP particles per liter(particlesL1)and the household food waste leachate exhibited the highest MP abundance(p<0.05).Polyethylene(PE)and fragments were the dominant polymer type and shape in MPs,respectively.The characteristic polymer types of MPs in individual leachates were different.Furthermore,the conditional fragmentation model indicated that the landfilling process considerably affected the size distribution of MPs in leachates,leading to a higher percentage(>80%)of small MPs(20–100 lm)in landfill leachates compared to other leachates.To the best of our knowledge,this is the first study discussing the sources of MPs in different leachates,which is important for MP pollution control during MSW disposal.

A comprehensive review on the resynthesis of ternary cathode active materials from the leachate of Li-ion batteries

This review highlights the importance of recovering valuable metals from spent Li-ion battery(LIB)cathodes through the resynthesis of cathode active materials(CAMs).The resynthesis process of CAMs,a promising recycling method that directly produces CAM precursors from LIB leachate,is explored.This process encompasses six key steps,including pretreatment,leaching,purification,adjustment of metal concentrations,precursor synthesis,and sintering.The review also investigates the potential introduction of impurity elements during CAM resynthesis and provides tolerance levels for these impurities based on thorough reference analysis.Additionally,it addresses challenges related to the commercialization of the resynthesis process.Notably,this review represents the first comprehensive assessment of CAM resynthesis,including the systematic evaluation of 12 impurity elements(Fe,Li,Al,Cu,C,P,F,Na,Cl,S,Mg,and Zn).Overall,this comprehensive review is poised to support the commercial development of resynthesized CAMs by offering valuable guidelines for managing impurities and streamlining the purification process.

Combined Insights from Leachate Structure and Microstructure Characteristics for Eating Quality of Convenience Rice Processed by Super-Heated and Pressurized Steam Technologies

Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using novel processing technologies: super-heated steaming(SHS), auto-electric cooking(AEC), and pressurized-steam cooking(PSC). Additionally, the effect of two different target water contents(58% and 63%) was also evaluated. The PSC_63% sample had the highest total solids and amylopectin amount in the leachate. The amylopectin amount in the leachate differed significantly based on the targeted water content. Morphological characterization revealed that the swelling of starch and the coated layer on the surface of rice grains were most pronounced in the PSC_63% sample due to the pressure processing. The textural hardness of the AEC_58% sample was much higher than that of the other samples. The PSC_63% sample had the highest textural adhesiveness value, which can be attributed to the highest amylopectin amount in the leachate. Sensory characterization showed that the PSC_63% sample had the highest glossiness, whiteness, moistness, and overall acceptability. The principal component analysis score plots presented substantial differences in the leachate and textural and sensory characteristics of reheated convenience rice among the different processing technologies.

Efficient and selective removal of Pb(Ⅱ) from landfill leachate using L-serine-modified polyethylene/polypropylene nonwoven fabric synthesized via radiation grafting technique

In this study,to efficiently remove Pb(Ⅱ) from aqueous environments,a novel L-serine-modified polyethylene/polypropylene nonwoven fabric sorbent(NWF-serine)was fabricated through the radiation grafting of glycidyl methacrylate and subsequent L-serine modification.The effect of the absorbed dose was investigated in the range of 5–50 kGy.NWF-serine was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,and scanning electron microscopy.Batch adsorption tests were conducted to investigate the influences of pH,adsorption time,temperature,initial concentration,and sorbent dosage on the Pb(Ⅱ) adsorption performance of NWF-serine.The results indicated that Pb(Ⅱ) adsorption onto NWF-serine was an endothermic process,following the pseudo-second-order kinetic model and Langmuir isotherm model.The saturated adsorption capacity was 198.1 mg/g.NWF-serine exhibited Pb(Ⅱ) removal rates of 99.8% for aqueous solutions with initial concentrations of 100 mg/L and 82.1% for landfill leachate containing competitive metal ions such as Cd,Cu,Ni,Mn,and Zn.Furthermore,NWF-serine maintained 86% of its Pb(Ⅱ) uptake after five use cycles.The coordination of the carboxyl and amino groups with Pb(Ⅱ) was confirmed using X-ray photoelectron spectroscopy and extended X-ray absorption fine structure analysis.

Assessment of water quality suitability for agriculture in a potentially leachate-contaminated region

Dump sites pose a significant threat to groundwater resources due to the possibility of leachate leakage into the aquifer.This study investigated the impact of leachate on groundwater quality in the southwest region of Zanjan City,Iran,where groundwater is utilized for drinking,agricultural,and industrial purposes.We analyzed 18 parameters of dump site leachate,including physicochemical,heavy metals,and bacterial properties,alongside 13 groundwater samples.Sampling was conducted twice,in November 2020 and June 2021,within a five-kilometer radius of the Zanjan dump site.We utilized the Leachate Pollution Index(LPI)to evaluate potential groundwater contamination by leachate leakage from nearby dumpsite.Additionally,due to the predominant agricultural activities in the study area,various indices were employed to assess groundwater quality for agricultural purposes,such as Sodium Adsorption Ratio(SAR),Soluble Sodium Index(SSI),Kelly Ratio(KR),and Permeability Index(PI).Our analysis revealed no observed contamination related to leachate in the study area according to the LPI results.However,with the persistent pollution threat,implementing sanitary measures at the dump site is crucial to prevent potential impacts on groundwater quality.Moreover,the assessment of groundwater quality adequacy for irrigation yielded satisfactory results for SAR,KR,and PI indices.However,during both the dry(November 2020)and wet seasons(June 2021),the SSP index indicated that 80%of the samples were not classified as excellent,suggesting groundwater may not be suitable for agriculture.Overal,our qualitative study highlights the significant impact of the dry season on groundwater quality in the study area,attributed to elevated concentration levels of the investigated parameters within groundwater sources during the dry season.

The Transport and Persistence of Escherichia coli in Leachate from Poultry Litter Amended Soils

Fecal coliform bacteria such as Escherichia coli (E. coli) are one of the main sources of groundwater pollution. An assessment of the transport and Persistence of E. coli in poultry litter amended Decatur silty Clay soil and Hartsells Sandy soil was conducted using soil columns and simulated groundwater leaching. Enumeration of initial E. coli was determined to range from 2.851 × 103 to 3.044 × 103 CFU per gram of soil. These results have been used in a batch study to determine the persistence rate of E. coli in Decatur silty Clay soil and Hartsells Sandy soil. Results prove that E. coli survival growth rate increases for clay soil later than and at a higher rate than sandy soil. The column study has determined that E. coli was transported at a rate of 3.7 × 106 CFU for Decatur silty loam and 6.3 × 106 CFU for Hartsells sandy per gram of soil. Further, linear regression analysis predictions show higher porosity and soil moisture content affect transport, and Hartsells sandy soil has higher transport of E. coli due to its higher porosity and lower volumetric water content.

Leachate Lithium Characteristics of Loess-paleosol Sequences on the Chinese Loess Plateau and their Paleoclimatic Significance

The geochemical components of the leachate from loess-paleosol deposits can provide information about climaterelated post-depositional processes.For example,leachate lithium([Li]_(leachate))is a potential paleoclimate proxy because lithium is a typical lithophile element that is readily adsorbed by clay minerals during weathering and pedogenesis,and thus stratigraphic variations in[Li]leachatecan reflect these processes.We investigated the[Li]leachatevalues of two loess-paleosols profiles(the Luochuan and Weinan sections),on a north-south climatic gradient on the Chinese Loess Plateau.Independent paleoclimate information was provided by measurements of magnetic susceptibility,grain size,Rb/Sr ratios,and clay mineral content.During the last glacial-interglacial period,[Li]leachateincreased from 0.39 to 1.97μg/g at Luochuan and from 0.67 to 2.45μg/g at Weinan,mainly due to increasing pedogenesis.Based on these results we developed a conceptual model to explain the variations in[Li]leachate,Li^(+)within loess layers is mainly derived from dust input and the decomposition of primary minerals,influenced by the East Asian winter monsoon,while in paleosol layers Li is mainly derived from clay mineral adsorption during pedogenic processes,influenced by the East Asian summer monsoon.

Influence of Leachate Recirculation on Landfill Degradation and Biogas Production

Population growth combined with the rising standard of living of people around the world is the reason for the ever-increasing production of waste which management is costing states a lot of money for its disposal. Among available waste treatment techniques, landfill is one of the most promoted waste management techniques with the emergence of the bioreactor concept. However, the control of biodegradation parameters in order to accelerate waste stabilization is an important issue. For environmental and economic reasons, the technique of leachate recirculation by injection into the waste is increasingly used to improve the degradation of landfilled waste. The injection of leachate is possible using vertical boreholes, horizontal pipes, infiltration ponds or a combination of these. Indeed, moisture is the main factor in waste degradation and biogas production. The migration of leachate to the bottom of the landfill creates low moisture in the upper areas of the landfill reducing the growth of microbial populations. This results in low or no biogas production. The main objective of the present work is to develop a numerical model of leachate recirculation by injection into the waste to rewet the waste and restart biological activity. The analysis of the results shows that the diffusion of the wet front increases with time and depth. The lateral widening of the wet front is slow in relation to the progression of the wet front towards the bottom of the waste cell. This indicates the predominance of gravity effects over diffusion phenomena. The results reveal that the distributed re-injection is the best mode of leachate recirculation because the moisture distribution on the whole waste mass is totally satisfactory and the biogas generation is more important. Leachate recirculation campaigns should be done periodically to rewet the waste, boost microbial activity and hope for a quicker stabilization of the landfill.

Study on the Recycling of P in Phosphogypsum Leachate

After washing and curing, P is transported from the phosphogypsum to the leachate during the phosphogypsum detoxification process, providing two ideas for phosphorus recovery from phosphogypsum leachate: 1) preparation of calcium hydrogen phosphate for feed;2) preparation of calcium phosphate. A ready-to-use calcium oxide slurry was used to recover P from phosphogypsum leachate at a slurry concentration of 20% and a quantitative link between calcium to phosphorus ratio and fixation rate was fitted by mixed use batch experiments, reaction kinetics and thermodynamics, and theoretical calculations were used to demonstrate that phosphorus cannot be completely reused in the preparation of calcium hydrogen phosphate. The findings demonstrated that: a) the residual phosphorus concentration was in the range of 1300 - 1500 mg/L for the preparation of type I feed grade calcium hydrogen phosphate from phosphogypsum leachate;b) the P removal effect could reach 99.99% for the preparation of calcium phosphate from phosphogypsum using the theoretical equation: fixation rate = 87.91 - 10.96(Ca/P) + 3.22(Ca/P)2 (R2 = 0.9954);c) The procedure follows the suggested secondary kinetics, and according to the Freundlich isothermal model, the reaction process is under the control of the chemical reaction, with a reaction index of 0.7605. This study can be used as a theoretical guide for the recovery of P from phosphogypsum leachate, the preparation of products to bring about economic by-products, and the purification of wastewater for reuse.

H_2S removal in landfill leachate treatment using UASB reactor

Leachate from a sanitary landfill site in Chengdu, China is treated using a hybrid-UASB reactor at pilot scale. H2S, resulting from the anaerobic bioconversion process of sulfate-reducing bacteria（SRB）, inhibits the growth and activity of methane-producing bacteria（MPB）and poses serious problems of pollution, so FeCl3is used for H2S removal. The results show that the system performs well in the treatment process. COD removal generally increases with the increase in the organic loading rate（OLR）, while the sulfate removal decreases slowly. As the OLR is higher than 7 kgCOD/（m3·d）, both COD and sulfate removal tend to be stable. When the reactor is operated at the design load of 9 kgCOD/（m3·d）, COD and sulfate removal remain about 79% and 91%, respectively. At the same time, the percentage of COD removed by SRB（CODSRB）also decreases from 8.9% to 4.0%. With FeCl3 addition, COD removal increases to 83%, while sulfate removal and CODSRBfurther decrease to 89% and 1.89%, respectively. According to the mass balance, nearly 82% of the sulfur is prevented from converting into H2S. Moreover, when the FeCl3 dosage is more than 1.6 g/L leachate, H2S can be removed totally from the biogas. Therefore, the application of FeCl3 for H2S removal in leachate treatment using the UASB reactor is very suitable and viable.

Landfill leachate treatment in assisted landfill bioreactor

Landfill is the major disposal route of municipal solid waste（MSW） in most Asian countries. Leachate from landfill presents a strong wastewater that needs intensive treatment before discharge. Direct recycling was proposed as an effective alternative for leachate treatment by taking the landfill as a bioreactor. This process was proved not only considerably reducing the pollution potential of leachate, but also enhancing organic degradation in the landfill. However, as this paper shows, although direct leachate recycling was effective in landfilled MSW with low food waste fraction （3.5%, w/w）, it failed in MSW containing 54% food waste, as normally noted in Asian countries. The initial acid stuck would inhibit methanogenesis to build up, hence strong leachate was yielded from landfill to threaten the quality of receiving water body. We demonstrated the feasibility to use an assisted bioreactor landfill, with a well-decomposed refuse layer as ex-situ anaerobic digester to reducing COD loading in leachate. By doing so, the refuse in simulated landfill column （2.3 m high） could be stabilized in 30 weeks while the COD in leachate reduced by 95%（61000 mg/L to 3000 mg/L）. Meanwhile, the biogas production was considerably enhanced, signaling by the much greater amount and much higher methane content in the biogas.

Geospatial and Statistical Assessment of Groundwater Contamination Due to Landfill Leachate—A Case Study

This study was conducted to measure the impact of a municipal solid waste landfill on groundwater quality around Njelianparamba, a solid waste dumping site in Kozhikode district, Kerala state, India. One of the major problems associated with dumping of municipal solid waste landfill is the release of leachate and its impact on surrounding groundwater. In this study, physico-chemical and bacteriological parameters of groundwater samples collected from the region surrounding the leachate area during the pre- and post-monsoon seasons were analysed. The majority of the groundwater samples contained contaminants at a level beyond the permissible limit set by the Bureau of Indian Standards for drinking water quality. The Geographic Information System software of the Environmental Systems Research Institute, (USA) ArcMap 10.1 was used to prepare spatial distribution maps of different parameters and Leachate Pollution Index and Water Quality Index in the study area were applied to assess the overall quality of groundwater. Characterisation of leachate and groundwater samples revealed that, water in the domestic wells has been deteriorated in response to the percolation of leachate. Additionally spatial and correlation analysis revealed that contamination was present maximum within 300 m radius around the landfill site.

Cooperative removal of Mn^(2+),NH_(4)^(+)-N,PO_(4)^(3-)-P and F−from electrolytic manganese residue leachate and phosphogypsum leachate

Electrolytic manganese residue leachate(EMRL)contains plenty of Mn^(2+) and NH_(4)^(+)-N,and phosphogypsum leachate(PGL)contains large amounts of PO_(4)^(3-)-P and F^(-).Traditional methods of EMRL and PGL discharge could seriously damage the ecological environment.In this study,an innovative method for cooperative removal Mn^(2+),NH_(4)^(+)-N,PO_(4)^(3-)-P,F^(-)from PG and POFT was studied.The result showed that Mn^(2+),PO_(4)^(3-)-P and F^(-)were mainly removed in forms of Mg_(3)Si_(4)O_(10)(OH)_(2),Mn_(3)O_(4),Mn_(3)(PO_(4))_(2),Mg_(3)(PO_(4))_(2),CaSO_(4)·2H_(2)O,MnF_(2),MnOOH and Ca_(2)P_(2)O_(7)·2H_(2)O,when LG-MgO was used to adjust the pH value of the system to 9.5,and the volume ratio of EMRL and PGL was 1:4,as well as reaction for 1 h at 25℃.NH_(4)^(+)-N was mainly removed by struvite precipitate,when the molar ratio of N:Mg:P was 1:3:2.4.The concentrations of Mn^(2+),NH_(4)^(+)-N and F^(-)were lower than the integrated wastewater discharge standard.The concentration of PO_(4)^(3-)-P decreased from 254.20 mg/L to 3.21 mg/L.This study provided a new method for EMRL and PGL cooperative harmless treatment.

Characteristics of dissolved organic matter(DOM) in leachate with different landfill ages

The main objective of the study was to investigate the characteristics of dissolved organic matter （DOM） in leachate with different landfill ages through the chemical, spectroscopic, and elemental analysis. Humic acid （HA）, fulvic acid （FA）, and hydrophilic （HyI） fractions were isolated and purified by the XAD-8 resin combined with the cation exchange resin method. The analytical results of fluorescence excitation-emission matrix spectroscopy （EEMs） revealed that the fluorescence peaks were protein-like fluorescence for young landfill leachate, while the fluorescence peaks for medium and old landfill leachate were humic-like and fulvic-like fluorescence, respectively. Elemental analysis showed that carbon, hydrogen, and nitrogen content decreased with landfill age, while the oxygen content increased. Moreover, the nitrogen content in these isolated fractions followed： HA 〉 HyI 〉 FA. The results of elemental analysis, FT-IR, and fluorescence EEMs also confirmed that aromatic carbons and portions of aliphatic functional groups were more abundant in leachate samples with increasing landfill age.

Nitrite Accumulation during the Denitrification Process in SBR for the Treatment of Pre-treated Landfill Leachate

The nitrite accumulation in the denitrification process is investigated with sequencing batch reactor （SBR） treating pre-treated landfill leachate in anoxic/anaerobic up-flow anaerobic sludge bed I（UASB）. Nitrite accumulates obviously at different initial nitrate concentrations （64.9,54.8,49.3 and 29.5 mg·L^-1 ） and low temperatures, and the two break points on the oxidation-reduction potential （ORP） profile indicate the completion of nitrate and nitrite reduction. Usually, the nitrate reduction rate is used as the sole parameter to characterize the denitrification rate, and nitrite is not even measured. For accuracy, the total oxidized nitrogen （nitrate ＋ nitrite） is used as a measure, though details characterizing the process may be overlooked. Additionally, batch tests are conducted to investigate the effects of C/N ratios and types of carbon sources on the nitrite accumulation during the denitrification. It is observed that carbon source is sufficient for the reduction of nitrate to nitrite, but for further reduction of nitrite to nitrogen gas, is deficient when C/N is below the theoretical critical level of 3.75 based on the stoichiometry of denitrification. Five carbon sources used in this work, except for glucose, may cause the nitrite accumulation. From experimental results and cited literature, it is concluded that Alcaligene species may be contained in the SBR activated-sludge system.

Advanced landfill leachate treatment using a two-stage UASB-SBR system at low temperature

A two-stage upflow anaerobic sludge blanket （UASB） and sequencing batch reactor （SBR） system was introduced to treat landfill leachate for advanced removal of COD and nitrogen at low temperature. In order to improve the total nitrogen （TN） removal efficiency and to reduce the COD requirement for denitrification, the raw leachate with recycled SBR nitrification supematant was pumped into the first-stage UASB （UASB1） to achieve simultaneous denitrification and methanogenesis. The results showed that UASB1 played an important role in COD removal and UASB2 and SBR further enhanced the nutrient removal efficiency. When the organic loading rates of UASB1, UASB2 and SBR were 11.95, 1.63 and 1.29 kg COD/（m^3.day）, respectively, the total COD removal efficiency of the whole system reached 96.7%. The SBR acted as the real undertaker for NH4^＋-N removal due to aerobic nitrification. The system obtained about 99.7% of NH4^＋-N removal efficiency at relatively low temperature （14.9-10.9℃）. More than 98.3% TN was removed through complete denitrification in UASB 1 and SBR. In addition, temperature had a significant effect on the rates of nitrification and denitrification rather than the removal of TN and NH4^＋-N once the complete nitrification and denitrification were achieved.

An autotrophic nitrogen removal process:Short-cut nitrification combined with ANAMMOX for treating diluted effluent from an UASB reactor fed by landfill leachate

A combined process consisting of a short-cut nitrification （SN） reactor and an anaerobic ammonium oxidation upflow anaerobic sludge bed （ANAMMOX） reactor was developed to treat the diluted effluent from an upflow anaerobic sludge bed （UASB） reactor treating high ammonium municipal landfill leachate.The SN process was performed in an aerated upflow sludge bed （AUSB） reactor （working volume 3.05 L）,treating about 50% of the diluted raw wastewater.The ammonium removal efficiency and the ratio of NO 2 N to NOx-N in the effluent were both higher than 80%,at a maximum nitrogen loading rate of 1.47 kg/（m 3 ·day）.The ANAMMOX process was performed in an UASB reactor （working volume 8.5 L）,using the mix of SN reactor effluent and diluted raw wastewater at a ratio of 1：1.The ammonium and nitrite removal efficiency reached over 93% and 95%,respectively,after 70-day continuous operation,at a maximum total nitrogen loading rate of 0.91 kg/（m 3 ·day）,suggesting a successful operation of the combined process.The average nitrogen loading rate of the combined system was 0.56 kg/（m 3 ·day）,with an average total inorganic nitrogen removal efficiency 87%.The nitrogen in the effluent was mostly nitrate.The results provided important evidence for the possibility of applying SN-ANAMMOX after UASB reactor to treat municipal landfill leachate.

Control factors of partial nitritation for landfill leachate treatment

Anaerobic ammonium oxidation （ANAMMOX） technology has potential technical superiority and economical efficiency for the nitrogen removal from landfill leachate, which contains high-strength ammonium nitrogen （NH4^＋-N） and refractory organics. To complete the ANAMMOX process, a preceding partial nitritation step to produce the appropriate ratio of nitrite/ammonium is a key stage. The objective of this study was to determine the optimal conditions to acquire constant partial nitritation for landfill leachate treatment, and a bench scale fixed bed bio-film reactor was used in this study to investigate the effects of the running factors on the partial nitritation. The results showed that both the dissolved oxygen （DO） concentration and the ammonium volumetric loading rate （Nv） had effects on the partial nitritation. In the controlling conditions with a temperature of 30±1℃, Nv of 0.2-1.0 kg NH4＋-N/（m^3·d）, and DO concentration of 0.8-2.3 mg/L, the steady partial nitritation was achieved as follows： more than 94% partial nitritation efficiency （nitrite as the main product）, 60%-74% NH4^＋-N removal efficiency, and NO2^--N/NH4^＋-N ratio （concentration ratio） of 1.0-1.4 in the effluent.The impact of temperature was related to Nv at certain DO concentration, and the temperature range of 25-30℃ was suitable for treating high strength ammonium leachate. Ammonium-oxidizing bacteria （AOB） could be acclimated to higher FA （free ammonium） in the range of 122-224 mg/L. According to the denaturing gradient gel electrophoresis analysis result of the bio-film in the reactor, there were 25 kinds of 16S rRNA gene fragments, which indicated that abundant microbial communities existed in the bio-film, although high concentrations of ammonium and FA may inhibit the growth of the nitrite-oxidizing bacteria （NOB） and other microorganisms in the reactor.

Nitrogen removal via nitrite from municipal landfill leachate

A system consisting of a two-stage up-flow anaerobic sludge blanket （UASB）, an anoxic/aerobic （A/O） reactor and a sequencing batch reactor （SBR）, was used to treat landfill leachate. During operation, denitrification and methanogenesis took place simultaneously in the first stage UASB, and the effluent chemical oxygen demand （COD） was further removed in the second stage UASB. Then the denitrification of nitrite and nitrate in the returned sludge by using the residual COD was accomplished in the A/O reactor, and ammonia was removed via nitrite in it. Last but not least, the residual ammonia was removed in SBR as well as nitrite and nitrate which were produced by nitrification. The results over 120 d （60 d for phase I and 60 d for phase II） were as follows： when the total nitrogen （TN） concentration of influent leachate was about 2500 mg/L and the ammonia nitrogen concentration was about 2000 mg/L, the shortcut nitrification with 85%-90% nitrite accumulation was achieved stably in the A/O reactor. The TN and ammonia nitrogen removal efficiencies of the system were 98% and 97%, respectively. The residual ammonia, nitrite and nitrate produced during nitrification in the A/O reactor could be washed out almost completely in SBR. The TN and ammonia nitrogen concentrations of final effluent were about 39 mg/L and 12 mg/L, respectively.

Organic matter and concentrated nitrogen removal by shortcut nitrification and denitrification from mature municipal landfill leachate

An UASB＋Anoxic/Oxic （A/O） system was introduced to treat a mature landfill leachate with low carbon-to-nitrogen ratio and high ammonia concentration. To make the best use of the biodegradable COD in the leaehate, the denitrifieation of NOx^--N in the reeireulation effluent from the elarifier was carried out in the UASB. The results showed that most biodegradable organic matters were removed by the denitrifieation in the UASB. The NH4^＋-N loading rate （ALR） of A/O reactor and operational temperature was 0.28- 0.60 kg NH4^＋-N/（m^3-d） and 17-29℃ during experimental period, respectively. The short-cut nitrification with nitrite accumulation efficiency of 90%-99% was stabilized during the whole experiment. The NH4^＋-N removal efficiency varied between 90% and 100%. When ALR was less than 0.45 kg NH4^＋-N/（m^3.d）, the NH4^＋-N removal efficiency was more than 98%. With the influent NH4^＋-N of 1200-1800 mg/L, the effluent NH4^＋-N was less than 15 mg/L. The shortcut nitrification and denitrifieation can save 40% carbon source, with a highly efficient denitrifieation taking place in the UASB. When the ratio of the feed COD to feed NH4^＋-N was only 2-3, the total inorganic nitrogen （TIN） removal efficiency attained 67%-80%. Besides, the sludge samples from A/O reactor were analyzed using FISH. The FISH analysis revealed that ammonia oxidation bacteria （AOB） accounted for 4% of the total eubaeterial population, whereas nitrite oxidation bacteria （NOB） accounted only for 0.2% of the total eubaeterial population.