Fifty-three larch interspecific hybrid clones(Larix kaempferi × L.gmelini) and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were 'S'-shaped a...Fifty-three larch interspecific hybrid clones(Larix kaempferi × L.gmelini) and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were 'S'-shaped and 36 exhibited similar curves as the male parent.The coefficients of the logistic models were higher than 0.943,indicating that our results were effective in the simulation of the growth curves.ANOVA analysis showed significant differences in height of different clones (P/0.01).Average date of maximum height growth was Day 173,and average duration of rapid growth lasted for 50 days.Annual average increase in height was 9.7cm d^(-1) and daily average increase was 0.2 cm.The ratio of GR to the total annual increase in height ranged from 51.2 to 68.8%,with the average being 59.8%.There was a positive correlation between k values and plant heights which benefited from the evaluation of early plant height.There was also a positive correlation between GR(growth stage),GD(plant height) and annual increase in height.These results are informative to the evaluation of the elite clone selection and provide a theoretical basis for breeding and management.展开更多
Malware is an ever-present and dynamic threat to networks and computer systems in cybersecurity,and because of its complexity and evasiveness,it is challenging to identify using traditional signature-based detection a...Malware is an ever-present and dynamic threat to networks and computer systems in cybersecurity,and because of its complexity and evasiveness,it is challenging to identify using traditional signature-based detection approaches.The study article discusses the growing danger to cybersecurity that malware hidden in PDF files poses,highlighting the shortcomings of conventional detection techniques and the difficulties presented by adversarial methodologies.The article presents a new method that improves PDF virus detection by using document analysis and a Logistic Model Tree.Using a dataset from the Canadian Institute for Cybersecurity,a comparative analysis is carried out with well-known machine learning models,such as Credal Decision Tree,Naïve Bayes,Average One Dependency Estimator,Locally Weighted Learning,and Stochastic Gradient Descent.Beyond traditional structural and JavaScript-centric PDF analysis,the research makes a substantial contribution to the area by boosting precision and resilience in malware detection.The use of Logistic Model Tree,a thorough feature selection approach,and increased focus on PDF file attributes all contribute to the efficiency of PDF virus detection.The paper emphasizes Logistic Model Tree’s critical role in tackling increasing cybersecurity threats and proposes a viable answer to practical issues in the sector.The results reveal that the Logistic Model Tree is superior,with improved accuracy of 97.46%when compared to benchmark models,demonstrating its usefulness in addressing the ever-changing threat landscape.展开更多
In view of the composition analysis and identification of ancient glass products, L1 regularization, K-Means cluster analysis, elbow rule and other methods were comprehensively used to build logical regression, cluste...In view of the composition analysis and identification of ancient glass products, L1 regularization, K-Means cluster analysis, elbow rule and other methods were comprehensively used to build logical regression, cluster analysis, hyper-parameter test and other models, and SPSS, Python and other tools were used to obtain the classification rules of glass products under different fluxes, sub classification under different chemical compositions, hyper-parameter K value test and rationality analysis. Research can provide theoretical support for the protection and restoration of ancient glass relics.展开更多
Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ri...Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p 〈0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to cheek the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1 ) and potential energy (X2 ) significantly impact (p 〈 0. 0001 ) the amplitude-based refleeted rate; the P-values for the deviance and Pearson are all 〉 0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height ( X1 ) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model. Investigation of 6 predictive powers ( R2, Max-rescaled R^2, Sorners' D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.展开更多
We present and discuss the partial oscillation with respect to equilibrium state ofm-dimensional Logistic delay ecologic models, and obtain some simple criteria.
Logistic models have been widely used for modelling the ongoing COVID-19 pandemic.This study used the data for Kuwait to assess the adequacy of the two most commonly used logistic models(Verhulst and Richards models)f...Logistic models have been widely used for modelling the ongoing COVID-19 pandemic.This study used the data for Kuwait to assess the adequacy of the two most commonly used logistic models(Verhulst and Richards models)for describing the dynamics COVID-19.Specifically,the study assessed the predictive performance of these two models and the practical identifiability of their parameters.Two model calibration approaches were adopted.In the first approach,all the data was used to fit the models as per the heuristic model fitting method.In the second approach,only the first half of the data was used for calibrating the models,while the other half was left for validating the models.Analysis of the obtained calibration and validation results have indicated that parameters of the two models cannot be identified with high certainty from COVID-19 data.Further,the models shown to have structural problems as they could not predict reasonably the validation data.Therefore,they should not be used for long-term predictions of COVID-19.Suggestion have been made for improving the performances of the models.展开更多
[ Objectlve] Impulsive Logistic Model was used to simulate epidemic process of Gray Leaf Spots caused by C. zeae-maydi. [ Method] The pathogen was inoculated in different maize varieties, and the incidence were observ...[ Objectlve] Impulsive Logistic Model was used to simulate epidemic process of Gray Leaf Spots caused by C. zeae-maydi. [ Method] The pathogen was inoculated in different maize varieties, and the incidence were observed and recorded. Impulsive Logistic Model was used to simulate the development process of the disease, which was compared with actual incidence. [ Result] Artificial inoculation tests showed that impulsive Logistic Model could reflect time dynamic of C. zeae-maydi. Through derivation, exponential growth phase was from maize seedling emergence to eady July in each year, logistic phase was from early July to late August, terminal phase was from eady September to the end of maize growth stage. [ Conclusion] The derivation result from model was consistent with the development biological laws of C. zeae-maydi.展开更多
Regulating planting density and nitrogen(N)fertilization could delay chlorophyll(Chl)degradation and leaf senescence in maize cultivars.This study measured changes in ear leaf green area(GLA_(ear)),Chl content,the act...Regulating planting density and nitrogen(N)fertilization could delay chlorophyll(Chl)degradation and leaf senescence in maize cultivars.This study measured changes in ear leaf green area(GLA_(ear)),Chl content,the activities of Chl a-degrading enzymes after silking,and the post-silking dry matter accumulation and grain yield under multiple planting densities and N fertilization rates.The dynamic change of GLA_(ear)after silking fitted to the logistic model,and the GLA_(ear) duration and the GLAearat 42 d after silking were affected mainly by the duration of the initial senescence period(T_(1))which was a key factor of the leaf senescence.The average chlorophyllase(CLH)activity was 8.3 times higher than pheophytinase activity and contributed most to the Chl content,indicating that CLH is a key enzyme for degrading Chl a in maize.Increasing density increased the CLH activity and decreased the Chl content,T1,GLAear,and GLA_(ear) duration.Under high density,appropriate N application reduced CLH activity,increased Chl content,prolonged T1,alleviated high-density-induced leaf senescence,and increased post-silking dry matter accumulation and grain yield.展开更多
Gully erosion is a disruptive phenomenon which extensively affects the Iranian territory,especially in the Northern provinces.A number of studies have been recently undertaken to study this process and to predict it o...Gully erosion is a disruptive phenomenon which extensively affects the Iranian territory,especially in the Northern provinces.A number of studies have been recently undertaken to study this process and to predict it over space and ultimately,in a broader national effort,to limit its negative effects on local communities.We focused on the Bastam watershed where 9.3%of its surface is currently affected by gullying.Machine learning algorithms are currently under the magnifying glass across the geomorphological community for their high predictive ability.However,unlike the bivariate statistical models,their structure does not provide intuitive and quantifiable measures of environmental preconditioning factors.To cope with such weakness,we interpret preconditioning causes on the basis of a bivariate approach namely,Index of Entropy.And,we performed the susceptibility mapping procedure by testing three extensions of a decision tree model namely,Alternating Decision Tree(ADTree),Naive-Bayes tree(NBTree),and Logistic Model Tree(LMT).We dichotomized the gully information over space into gully presence/absence conditions,which we further explored in their calibration and validation stages.Being the presence/absence information and associated factors identical,the resulting differences are only due to the algorithmic structures of the three models we chose.Such differences are not significant in terms of performances;in fact,the three models produce outstanding predictive AUC measures(ADTree=0.922;NBTree=0.939;LMT=0.944).However,the associated mapping results depict very different patterns where only the LMT is associated with reasonable susceptibility patterns.This is a strong indication of what model combines best performance and mapping for any natural hazard-oriented application.展开更多
A stochastic logistic model with delays and impulsive perturbation is proposed and investigated. Sufficient conditions for extinction are established as well as nonpersistence in the mean, weak persistence and stochas...A stochastic logistic model with delays and impulsive perturbation is proposed and investigated. Sufficient conditions for extinction are established as well as nonpersistence in the mean, weak persistence and stochastic permanence. The threshold between weak persistence and extinction is obtained. Furthermore, the theoretical analysis results are also derivated with the help of numerical simulations.展开更多
Objective:To identify the predictors of mortality among in-hospital melioidosis patients.Methods:A total of 453 patients in Hospital Sultanah Bahiyah,Kedah,and Hospital Tuanku Fauziah,Perlis with culture-confirmed mel...Objective:To identify the predictors of mortality among in-hospital melioidosis patients.Methods:A total of 453 patients in Hospital Sultanah Bahiyah,Kedah,and Hospital Tuanku Fauziah,Perlis with culture-confirmed melioidosis were retrospectively included in the study.Advanced multiple logistic regression was used to obtain the final model of predictors of mortality from melioidosis.The analysis was performed using STATA/SE 14.0.Results:A total of 50.11%(227/453)of the patients died at the hospital,and a majority(86.75%,393/453)of cases were bacteremic.The logistic regression estimated that the bacteremic type of melioidosis,low platelet count,abnormal white blood cell counts,and increased urea value were predictors of mortality.The results showed that bacteremic melioidosis increased the risk of death by 4.39 times(OR 4.39,95%CI 1.83-10.55,P=0.001)compared to non-bacteremic melioidosis.Based on laboratory test,the adjusted ORs from the final model showed that all three blood investigations were included as the associated factors of mortality for the disease[high white blood cell(>10×10^(9)/L):OR 2.43,95%CI1.41-4.17,P<0.001;low white blood cell(<4×10^(9)/L):OR 3.82,95%CI 1.09-13.34,P=0.036;low platelet(<100×10^(9)/L):OR 4.19,95%CI 1.89-9.30,P<0.001;high urea(>7800μmol/L):OR 5.53,95%CI 2.50-12.30,P<0.001;and low level of urea(<2500μmol/L):OR 3.52,95%CI 1.71-7.23,P=0.001].Conclusions:Routine blood investigations during a hospital admission can early identify predictors of mortality in melioidosis patients.展开更多
Tyre pressure monitoring system(TPMS)is compulsory in most countries like the United States and European Union.The existing systems depend on pressure sensors strapped on the tyre or on wheel speed sensor data.A diffe...Tyre pressure monitoring system(TPMS)is compulsory in most countries like the United States and European Union.The existing systems depend on pressure sensors strapped on the tyre or on wheel speed sensor data.A difference in wheel speed would trigger an alarm based on the algorithm implemented.In this paper,machine learning approach is proposed as a new method to monitor tyre pressure by extracting the vertical vibrations from a wheel hub of a moving vehicle using an accelerometer.The obtained signals will be used to compute through statistical features and histogram features for the feature extraction process.The LMT(Logistic Model Tree)was used as the classifier and attained a classification accuracy of 92.5%with 10-fold cross validation for statistical features and 90.5% with 10-fold cross validation for histogram features.The proposed model can be used for monitoring the automobile tyre pressure successfully.展开更多
A nonautonomous delayed logistic model with linear feedback regulation is proposed in this paper. Sufficient conditions are derived for the existence, uniqueness and global asymptotic stability of positive periodic so...A nonautonomous delayed logistic model with linear feedback regulation is proposed in this paper. Sufficient conditions are derived for the existence, uniqueness and global asymptotic stability of positive periodic solution of the model展开更多
Based on the weekly closing price of Shenzhen Integrated Index, this article studies the volatility of Shenzhen Stock Market using three different models: Logistic, AR(1) and AR(2). The time-variable parameters o...Based on the weekly closing price of Shenzhen Integrated Index, this article studies the volatility of Shenzhen Stock Market using three different models: Logistic, AR(1) and AR(2). The time-variable parameters of Logistic regression model is estimated by using both the index smoothing method and the time-variable parameter estimation method. And both the AR(1) model and the AR(2) model of zero-mean series of the weekly dosing price and its zero-mean series of volatility rate are established based on the analysis results of zero-mean series of the weekly closing price, Six common statistical methods for error prediction are used to test the predicting results. These methods are: mean error (ME), mean absolute error (MAE), root mean squared error (RMSE), mean absolute percentage error (MAPE), Akaike's information criterion (AIC), and Bayesian information criterion (BIC). The investigation shows that AR(1) model exhibits the best predicting result, whereas AR(2) model exhibits predicting results that is intermediate between AR(1) model and the Logistic regression model.展开更多
The asymptotic stability of a discrete logistic model with random growth coefficient is studied in this paper. Firstly, the discrete logistic model with random growth coefficient is built and reduced into its determin...The asymptotic stability of a discrete logistic model with random growth coefficient is studied in this paper. Firstly, the discrete logistic model with random growth coefficient is built and reduced into its deterministic equivalent system by orthogonal polynomial approximation. Then, the linear stability theory and the Jury criterion of nonlinear deterministic discrete systems are applied to the equivalent one. At last, by mathematical analysis, we find that the parameter interval for asymptotic stability of nontrivial equilibrium in stochastic logistic system gets smaller as the random intensity or statistical parameters of random variable is increased and the random parameter’s influence on asymptotic stability in stochastic logistic system becomes prominent.展开更多
In this paper, laser melting deposition(LMD), a new advanced manufacture technology. While manufacturing a metal part by LMD process, if we could control the energy distribution in internal different areas such as cla...In this paper, laser melting deposition(LMD), a new advanced manufacture technology. While manufacturing a metal part by LMD process, if we could control the energy distribution in internal different areas such as cladding layer or that between cladding layer and the substrate with optimal process parameters, the probability of internal defects of parts can be reduced, and the mechanical properties of parts will be greatly improved. To address the problem that whether the part made by LMD has internal defects, in this paper we designed the orthogonal rotation experiments through selecting different process parameters. Then a Logistic Regression model was built based on the experiments data. The calculation result of the regression model was in good agreement with the result of authentication test. Therefore, this Logistic Regression model has important reference for selecting LMD process parameters.展开更多
Traditional collaborative filtering (CF) does not take into account contextual factors such as time, place, companion, environment, etc. which are useful information around users or relevant to recommender application...Traditional collaborative filtering (CF) does not take into account contextual factors such as time, place, companion, environment, etc. which are useful information around users or relevant to recommender application. So, recent aware-context CF takes advantages of such information in order to improve the quality of recommendation. There are three main aware-context approaches: contextual pre-filtering, contextual post-filtering and contextual modeling. Each approach has individual strong points and drawbacks but there is a requirement of steady and fast inference model which supports the aware-context recommendation process. This paper proposes a new approach which discovers multivariate logistic regression model by mining both traditional rating data and contextual data. Logistic model is optimal inference model in response to the binary question “whether or not a user prefers a list of recommendations with regard to contextual condition”. Consequently, such regression model is used as a filter to remove irrelevant items from recommendations. The final list is the best recommendations to be given to users under contextual information. Moreover the searching items space of logistic model is reduced to smaller set of items so-called general user pattern (GUP). GUP supports logistic model to be faster in real-time response.展开更多
In this paper,we formulate and analyze a new fractional-order Logistic model with feedback control,which is different from a recognized mathematical model proposed in our very recent work.Asymptotic stability of the p...In this paper,we formulate and analyze a new fractional-order Logistic model with feedback control,which is different from a recognized mathematical model proposed in our very recent work.Asymptotic stability of the proposed model and its numerical solutions are studied rigorously.By using the Lyapunov direct method for fractional dynamical systems and a suitable Lyapunov function,we show that a unique positive equilibrium point of the new model is asymptotically stable.As an important consequence of this,we obtain a new mathematical model in which the feedback control variables only change the position of the unique positive equilibrium point of the original model but retain its asymptotic stability.Furthermore,we construct unconditionally positive nonstandard finite difference(NSFD)schemes for the proposed model using the Mickens’methodology.It is worth noting that the constructed NSFD schemes not only preserve the positivity but also provide reliable numerical solutions that correctly reflect the dynamics of the new fractional-order model.Finally,we report some numerical examples to support and illustrate the theoretical results.The results indicate that there is a good agreement between the theoretical results and numerical ones.展开更多
Transmission disequilibrium test (TDT) is a popular family based genetic association method. Under multiplicative assumption, a conditional logistic regression for matched pair, affected offspring with allele transmit...Transmission disequilibrium test (TDT) is a popular family based genetic association method. Under multiplicative assumption, a conditional logistic regression for matched pair, affected offspring with allele transmitted from parents and pseudo-offspring (control) with allele non-transmitted from parents, was built to detect the <span style="font-family:Verdana;">main </span><span style="font-family:Verdana;">effects of genes and gene-covariate interaction</span><span style="font-family:Verdana;">s</span><span style="font-family:;" "=""><span style="font-family:Verdana;">. When there exist genotype uncertainties, expectation-maximization (EM) algorithm was adopted to estimate the coefficients. The transmission model was applied to detect the association between M235T polymorphism in AGT gene and essential hypertension (ESH). Most of parents are not available in the 126 families from HongKong Chinese population. The results </span><span style="font-family:Verdana;">showed M235T is associat</span></span><span style="font-family:Verdana;">ed</span><span style="font-family:Verdana;"> with hypertension and there is interaction between M235T and the case’s sex. The allele T is higher risk for male than female</span><span style="font-family:Verdana;">.</span>展开更多
Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance...Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance service company are addressed. The authors developed a set of vehicle rout ings to cover each schedule flights; the objectives pursued are the maximization of vehicle and manpower utilization and minimization of operation time. To obta in the goals, an integer-programming model with genetic algorithm is formulated . It is found that the company can produce an effective and efficient schedules to deploy the manpower and equipment resources. Simulation is used to verify the method and a MATLAB program is used to code the genetic algorithm. This model i s further illustrated by a case study in Hong Kong and the benefit elaborated. F inally, a conclusion is made to summarize the experience of this project and pro vide further improvement.展开更多
基金supported by Grants from the National Science and Technology Pillar Program of China(No.2015DAD09B01)
文摘Fifty-three larch interspecific hybrid clones(Larix kaempferi × L.gmelini) and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were 'S'-shaped and 36 exhibited similar curves as the male parent.The coefficients of the logistic models were higher than 0.943,indicating that our results were effective in the simulation of the growth curves.ANOVA analysis showed significant differences in height of different clones (P/0.01).Average date of maximum height growth was Day 173,and average duration of rapid growth lasted for 50 days.Annual average increase in height was 9.7cm d^(-1) and daily average increase was 0.2 cm.The ratio of GR to the total annual increase in height ranged from 51.2 to 68.8%,with the average being 59.8%.There was a positive correlation between k values and plant heights which benefited from the evaluation of early plant height.There was also a positive correlation between GR(growth stage),GD(plant height) and annual increase in height.These results are informative to the evaluation of the elite clone selection and provide a theoretical basis for breeding and management.
基金This research work was funded by Institutional Fund Projects under Grant No.(IFPIP:211-611-1443).
文摘Malware is an ever-present and dynamic threat to networks and computer systems in cybersecurity,and because of its complexity and evasiveness,it is challenging to identify using traditional signature-based detection approaches.The study article discusses the growing danger to cybersecurity that malware hidden in PDF files poses,highlighting the shortcomings of conventional detection techniques and the difficulties presented by adversarial methodologies.The article presents a new method that improves PDF virus detection by using document analysis and a Logistic Model Tree.Using a dataset from the Canadian Institute for Cybersecurity,a comparative analysis is carried out with well-known machine learning models,such as Credal Decision Tree,Naïve Bayes,Average One Dependency Estimator,Locally Weighted Learning,and Stochastic Gradient Descent.Beyond traditional structural and JavaScript-centric PDF analysis,the research makes a substantial contribution to the area by boosting precision and resilience in malware detection.The use of Logistic Model Tree,a thorough feature selection approach,and increased focus on PDF file attributes all contribute to the efficiency of PDF virus detection.The paper emphasizes Logistic Model Tree’s critical role in tackling increasing cybersecurity threats and proposes a viable answer to practical issues in the sector.The results reveal that the Logistic Model Tree is superior,with improved accuracy of 97.46%when compared to benchmark models,demonstrating its usefulness in addressing the ever-changing threat landscape.
文摘In view of the composition analysis and identification of ancient glass products, L1 regularization, K-Means cluster analysis, elbow rule and other methods were comprehensively used to build logical regression, cluster analysis, hyper-parameter test and other models, and SPSS, Python and other tools were used to obtain the classification rules of glass products under different fluxes, sub classification under different chemical compositions, hyper-parameter K value test and rationality analysis. Research can provide theoretical support for the protection and restoration of ancient glass relics.
基金This paper was financially supported by NSC96-2628-E-366-004-MY2 and NSC96-2628-E-132-001-MY2
文摘Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p 〈0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to cheek the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1 ) and potential energy (X2 ) significantly impact (p 〈 0. 0001 ) the amplitude-based refleeted rate; the P-values for the deviance and Pearson are all 〉 0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height ( X1 ) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model. Investigation of 6 predictive powers ( R2, Max-rescaled R^2, Sorners' D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.
文摘We present and discuss the partial oscillation with respect to equilibrium state ofm-dimensional Logistic delay ecologic models, and obtain some simple criteria.
文摘Logistic models have been widely used for modelling the ongoing COVID-19 pandemic.This study used the data for Kuwait to assess the adequacy of the two most commonly used logistic models(Verhulst and Richards models)for describing the dynamics COVID-19.Specifically,the study assessed the predictive performance of these two models and the practical identifiability of their parameters.Two model calibration approaches were adopted.In the first approach,all the data was used to fit the models as per the heuristic model fitting method.In the second approach,only the first half of the data was used for calibrating the models,while the other half was left for validating the models.Analysis of the obtained calibration and validation results have indicated that parameters of the two models cannot be identified with high certainty from COVID-19 data.Further,the models shown to have structural problems as they could not predict reasonably the validation data.Therefore,they should not be used for long-term predictions of COVID-19.Suggestion have been made for improving the performances of the models.
基金Supported by Doctoral Fundation of Liaoning Province(20081064)Liaoning BaiQianWan Talents Program(2009921072)Ministry of Agriculture,National Research Subject(2004BA520A11)~~
文摘[ Objectlve] Impulsive Logistic Model was used to simulate epidemic process of Gray Leaf Spots caused by C. zeae-maydi. [ Method] The pathogen was inoculated in different maize varieties, and the incidence were observed and recorded. Impulsive Logistic Model was used to simulate the development process of the disease, which was compared with actual incidence. [ Result] Artificial inoculation tests showed that impulsive Logistic Model could reflect time dynamic of C. zeae-maydi. Through derivation, exponential growth phase was from maize seedling emergence to eady July in each year, logistic phase was from early July to late August, terminal phase was from eady September to the end of maize growth stage. [ Conclusion] The derivation result from model was consistent with the development biological laws of C. zeae-maydi.
基金financially supported by the National Key Research and Development Program of China(2022YFD190160304)Natural Science Foundation of Sichuan Province(2022NSFSC0013)+1 种基金Sichuan Maize Innovation Team Construction Project(SCCXTD-2022-02)National Key Research and Development Program of China(2018YFD0301206)。
文摘Regulating planting density and nitrogen(N)fertilization could delay chlorophyll(Chl)degradation and leaf senescence in maize cultivars.This study measured changes in ear leaf green area(GLA_(ear)),Chl content,the activities of Chl a-degrading enzymes after silking,and the post-silking dry matter accumulation and grain yield under multiple planting densities and N fertilization rates.The dynamic change of GLA_(ear)after silking fitted to the logistic model,and the GLA_(ear) duration and the GLAearat 42 d after silking were affected mainly by the duration of the initial senescence period(T_(1))which was a key factor of the leaf senescence.The average chlorophyllase(CLH)activity was 8.3 times higher than pheophytinase activity and contributed most to the Chl content,indicating that CLH is a key enzyme for degrading Chl a in maize.Increasing density increased the CLH activity and decreased the Chl content,T1,GLAear,and GLA_(ear) duration.Under high density,appropriate N application reduced CLH activity,increased Chl content,prolonged T1,alleviated high-density-induced leaf senescence,and increased post-silking dry matter accumulation and grain yield.
文摘Gully erosion is a disruptive phenomenon which extensively affects the Iranian territory,especially in the Northern provinces.A number of studies have been recently undertaken to study this process and to predict it over space and ultimately,in a broader national effort,to limit its negative effects on local communities.We focused on the Bastam watershed where 9.3%of its surface is currently affected by gullying.Machine learning algorithms are currently under the magnifying glass across the geomorphological community for their high predictive ability.However,unlike the bivariate statistical models,their structure does not provide intuitive and quantifiable measures of environmental preconditioning factors.To cope with such weakness,we interpret preconditioning causes on the basis of a bivariate approach namely,Index of Entropy.And,we performed the susceptibility mapping procedure by testing three extensions of a decision tree model namely,Alternating Decision Tree(ADTree),Naive-Bayes tree(NBTree),and Logistic Model Tree(LMT).We dichotomized the gully information over space into gully presence/absence conditions,which we further explored in their calibration and validation stages.Being the presence/absence information and associated factors identical,the resulting differences are only due to the algorithmic structures of the three models we chose.Such differences are not significant in terms of performances;in fact,the three models produce outstanding predictive AUC measures(ADTree=0.922;NBTree=0.939;LMT=0.944).However,the associated mapping results depict very different patterns where only the LMT is associated with reasonable susceptibility patterns.This is a strong indication of what model combines best performance and mapping for any natural hazard-oriented application.
基金supported by the National Natural Science Foundation of China(11271101)the NNSF of Shandong Province(ZR2010AQ021)
文摘A stochastic logistic model with delays and impulsive perturbation is proposed and investigated. Sufficient conditions for extinction are established as well as nonpersistence in the mean, weak persistence and stochastic permanence. The threshold between weak persistence and extinction is obtained. Furthermore, the theoretical analysis results are also derivated with the help of numerical simulations.
基金supported by Universiti Sultan Zainal Abidin(grant number:Uni SZA/2018/DPU/16)
文摘Objective:To identify the predictors of mortality among in-hospital melioidosis patients.Methods:A total of 453 patients in Hospital Sultanah Bahiyah,Kedah,and Hospital Tuanku Fauziah,Perlis with culture-confirmed melioidosis were retrospectively included in the study.Advanced multiple logistic regression was used to obtain the final model of predictors of mortality from melioidosis.The analysis was performed using STATA/SE 14.0.Results:A total of 50.11%(227/453)of the patients died at the hospital,and a majority(86.75%,393/453)of cases were bacteremic.The logistic regression estimated that the bacteremic type of melioidosis,low platelet count,abnormal white blood cell counts,and increased urea value were predictors of mortality.The results showed that bacteremic melioidosis increased the risk of death by 4.39 times(OR 4.39,95%CI 1.83-10.55,P=0.001)compared to non-bacteremic melioidosis.Based on laboratory test,the adjusted ORs from the final model showed that all three blood investigations were included as the associated factors of mortality for the disease[high white blood cell(>10×10^(9)/L):OR 2.43,95%CI1.41-4.17,P<0.001;low white blood cell(<4×10^(9)/L):OR 3.82,95%CI 1.09-13.34,P=0.036;low platelet(<100×10^(9)/L):OR 4.19,95%CI 1.89-9.30,P<0.001;high urea(>7800μmol/L):OR 5.53,95%CI 2.50-12.30,P<0.001;and low level of urea(<2500μmol/L):OR 3.52,95%CI 1.71-7.23,P=0.001].Conclusions:Routine blood investigations during a hospital admission can early identify predictors of mortality in melioidosis patients.
文摘Tyre pressure monitoring system(TPMS)is compulsory in most countries like the United States and European Union.The existing systems depend on pressure sensors strapped on the tyre or on wheel speed sensor data.A difference in wheel speed would trigger an alarm based on the algorithm implemented.In this paper,machine learning approach is proposed as a new method to monitor tyre pressure by extracting the vertical vibrations from a wheel hub of a moving vehicle using an accelerometer.The obtained signals will be used to compute through statistical features and histogram features for the feature extraction process.The LMT(Logistic Model Tree)was used as the classifier and attained a classification accuracy of 92.5%with 10-fold cross validation for statistical features and 90.5% with 10-fold cross validation for histogram features.The proposed model can be used for monitoring the automobile tyre pressure successfully.
文摘A nonautonomous delayed logistic model with linear feedback regulation is proposed in this paper. Sufficient conditions are derived for the existence, uniqueness and global asymptotic stability of positive periodic solution of the model
基金The research is supported by the National Natural Science Foundation of China (60574069)the Soft Science Foundation of Guangdong Province (2005B70101044)
文摘Based on the weekly closing price of Shenzhen Integrated Index, this article studies the volatility of Shenzhen Stock Market using three different models: Logistic, AR(1) and AR(2). The time-variable parameters of Logistic regression model is estimated by using both the index smoothing method and the time-variable parameter estimation method. And both the AR(1) model and the AR(2) model of zero-mean series of the weekly dosing price and its zero-mean series of volatility rate are established based on the analysis results of zero-mean series of the weekly closing price, Six common statistical methods for error prediction are used to test the predicting results. These methods are: mean error (ME), mean absolute error (MAE), root mean squared error (RMSE), mean absolute percentage error (MAPE), Akaike's information criterion (AIC), and Bayesian information criterion (BIC). The investigation shows that AR(1) model exhibits the best predicting result, whereas AR(2) model exhibits predicting results that is intermediate between AR(1) model and the Logistic regression model.
基金supported by the National Natural Science Foundation of China(11362001 and 11002001)the Natural Science Foundation of Ningxia Hui Autonomous Region(NZ12210)
文摘The asymptotic stability of a discrete logistic model with random growth coefficient is studied in this paper. Firstly, the discrete logistic model with random growth coefficient is built and reduced into its deterministic equivalent system by orthogonal polynomial approximation. Then, the linear stability theory and the Jury criterion of nonlinear deterministic discrete systems are applied to the equivalent one. At last, by mathematical analysis, we find that the parameter interval for asymptotic stability of nontrivial equilibrium in stochastic logistic system gets smaller as the random intensity or statistical parameters of random variable is increased and the random parameter’s influence on asymptotic stability in stochastic logistic system becomes prominent.
文摘In this paper, laser melting deposition(LMD), a new advanced manufacture technology. While manufacturing a metal part by LMD process, if we could control the energy distribution in internal different areas such as cladding layer or that between cladding layer and the substrate with optimal process parameters, the probability of internal defects of parts can be reduced, and the mechanical properties of parts will be greatly improved. To address the problem that whether the part made by LMD has internal defects, in this paper we designed the orthogonal rotation experiments through selecting different process parameters. Then a Logistic Regression model was built based on the experiments data. The calculation result of the regression model was in good agreement with the result of authentication test. Therefore, this Logistic Regression model has important reference for selecting LMD process parameters.
文摘Traditional collaborative filtering (CF) does not take into account contextual factors such as time, place, companion, environment, etc. which are useful information around users or relevant to recommender application. So, recent aware-context CF takes advantages of such information in order to improve the quality of recommendation. There are three main aware-context approaches: contextual pre-filtering, contextual post-filtering and contextual modeling. Each approach has individual strong points and drawbacks but there is a requirement of steady and fast inference model which supports the aware-context recommendation process. This paper proposes a new approach which discovers multivariate logistic regression model by mining both traditional rating data and contextual data. Logistic model is optimal inference model in response to the binary question “whether or not a user prefers a list of recommendations with regard to contextual condition”. Consequently, such regression model is used as a filter to remove irrelevant items from recommendations. The final list is the best recommendations to be given to users under contextual information. Moreover the searching items space of logistic model is reduced to smaller set of items so-called general user pattern (GUP). GUP supports logistic model to be faster in real-time response.
文摘In this paper,we formulate and analyze a new fractional-order Logistic model with feedback control,which is different from a recognized mathematical model proposed in our very recent work.Asymptotic stability of the proposed model and its numerical solutions are studied rigorously.By using the Lyapunov direct method for fractional dynamical systems and a suitable Lyapunov function,we show that a unique positive equilibrium point of the new model is asymptotically stable.As an important consequence of this,we obtain a new mathematical model in which the feedback control variables only change the position of the unique positive equilibrium point of the original model but retain its asymptotic stability.Furthermore,we construct unconditionally positive nonstandard finite difference(NSFD)schemes for the proposed model using the Mickens’methodology.It is worth noting that the constructed NSFD schemes not only preserve the positivity but also provide reliable numerical solutions that correctly reflect the dynamics of the new fractional-order model.Finally,we report some numerical examples to support and illustrate the theoretical results.The results indicate that there is a good agreement between the theoretical results and numerical ones.
文摘Transmission disequilibrium test (TDT) is a popular family based genetic association method. Under multiplicative assumption, a conditional logistic regression for matched pair, affected offspring with allele transmitted from parents and pseudo-offspring (control) with allele non-transmitted from parents, was built to detect the <span style="font-family:Verdana;">main </span><span style="font-family:Verdana;">effects of genes and gene-covariate interaction</span><span style="font-family:Verdana;">s</span><span style="font-family:;" "=""><span style="font-family:Verdana;">. When there exist genotype uncertainties, expectation-maximization (EM) algorithm was adopted to estimate the coefficients. The transmission model was applied to detect the association between M235T polymorphism in AGT gene and essential hypertension (ESH). Most of parents are not available in the 126 families from HongKong Chinese population. The results </span><span style="font-family:Verdana;">showed M235T is associat</span></span><span style="font-family:Verdana;">ed</span><span style="font-family:Verdana;"> with hypertension and there is interaction between M235T and the case’s sex. The allele T is higher risk for male than female</span><span style="font-family:Verdana;">.</span>
文摘Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance service company are addressed. The authors developed a set of vehicle rout ings to cover each schedule flights; the objectives pursued are the maximization of vehicle and manpower utilization and minimization of operation time. To obta in the goals, an integer-programming model with genetic algorithm is formulated . It is found that the company can produce an effective and efficient schedules to deploy the manpower and equipment resources. Simulation is used to verify the method and a MATLAB program is used to code the genetic algorithm. This model i s further illustrated by a case study in Hong Kong and the benefit elaborated. F inally, a conclusion is made to summarize the experience of this project and pro vide further improvement.