Pile foundations are challenging to build due to subsurface obstacles, contractor ignorance, and difficulties with site planning. Given the unpredictable environment of the construction site, productivity losses durin...Pile foundations are challenging to build due to subsurface obstacles, contractor ignorance, and difficulties with site planning. Given the unpredictable environment of the construction site, productivity losses during pile work are to be thought possible. Prior to finishing a site pre-investigation, a foundation’s area is usually sampled for statistical reasons. There are studies on pile construction outside of Bangladesh that are supported by relevant empirical data in the literature. Since Bangladesh, which is regarded as a third-world country, is ignored in this regard, the literature currently available about pile building and the associated productivity loss is unable to provide adequate information or appropriate empirical data. Due to this pile-building sector in Bangladesh has been experiencing a decline in production for quite some time now. Before attempting to increase productivity in pile construction, it is essential to investigate the potential losses and the variables that might have an influence. This study aims to accomplish the following objectives: 1) identify the primary factors that have an impact on pile construction;2) develop an SVR model that accurately predicts productivity loss;and 3) figure out the projected loss by basing it on the historical scenario that is the most comparable to the current one. A Support Vector Regression (SVR) model was developed after a study of the relevant literature. This model enabled the collection of 110 pile building projects from five significant locations in Bangladesh. The model was constructed using a list of eight inputs in addition to a list of five macro elements (labor, management, environment, material, and equipment) (soil condition, pile type, pile material, project size, project location, pile depth, pile quantity, and equipment quantity). Using 10-way cross validation, the SVR achieves an accuracy of 87.2% in its predictions. On the basis of what has occurred in the past, we are able to estimate that there will be a loss of around 18.55 percent of the total output. A new perspective for engineers studying the delay factors with productivity loss is provided by the outcome of important tasks as it relates to loss in productivity and overall factors faced. In the building construction industry, effective management should place more emphasis on the correlation between productivity loss and the factors that cause it. Therefore, to represent the effect on productivity loss, real factors can be summed up as a decline in productivity loss. The findings of the study would urge specialists to concentrate on waste as a means of increasing overall production.展开更多
BACKGROUND Macro-aspartate aminotransferase(AST), a macroenzyme, is a high-molecular mass complex formed by self-polymerization or association with other serum components that are difficult for the kidney to clear, le...BACKGROUND Macro-aspartate aminotransferase(AST), a macroenzyme, is a high-molecular mass complex formed by self-polymerization or association with other serum components that are difficult for the kidney to clear, leading to the isolated elevation of serum AST activity. Cases of macro-AST formation are rare, with only 3 published in the English language literature up to September 2019 in China. In this paper, we present a case in which an asymptomatic woman with persistent isolated elevated AST was confirmed as having macro-AST by the polyethylene glycol precipitation method.CASE SUMMARY A 34-year-old woman was referred to our clinic for elevated AST levels with normal levels of other liver-associated enzymes on November 12, 2018. Her AST level of liver function test had been abnormal for 7 mo before she came to the clinic. The patient was asymptomatic with a normal physical examination. There was no relevant family history and no alcohol consumption or smoking. She had a several-month history of traditional Chinese medical taking and had stopped it 1 year prior. The laboratory tests in our clinic showed only the elevation of AST(89.5 U/L) with no other significant abnormalities. We performed the precipitation technique with polyethylene glycol to confirm the presence of macro-AST. Then for almost a year, her AST level still fluctuated in the abnormal range.CONCLUSION This case highlights that clinical physicians should be familiar with this rare condition of persistent isolated AST elevation due to the presence of macro-AST to avoid unnecessary investigation and patient anxiety.展开更多
This paper is based on three observations and independent thinking of the classroom teaching of the author’s colleagues.It attempts to examine how macro and micro contexts affect teaching and learning in the classroo...This paper is based on three observations and independent thinking of the classroom teaching of the author’s colleagues.It attempts to examine how macro and micro contexts affect teaching and learning in the classroom.The author focuses the discussion on three aspects:(i)the present EFL contextual setting in China;(ii)the influence of the evaluation system on both teachers and students;(iii)his own beliefs as a teacher.Finally,he comes to the implications that teachers should often reflect on their teaching by means of observing other teachers’teachings;In order to bring more effective teaching and learning to the class,Teachers should change their class from a teacher-centered one to a students-centered one.展开更多
Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural ...Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural health. Modal curvature-based damage detection techniques have recently garnered considerable attention from the research community, and have become a promising vibration-based structural health monitoring solution. However, computing errors arise when calculating modal curvatures from lateral mode shapes, which result from unavoidable measurement errors in the mode shapes as identified from lateral vibration signals; this makes curvature-based algorithms that use a lateral measurement only theoretically feasible, but practically infeasible. Therefore, in this study, long-gauge fiber Bragg grating strain sensors are employed to obtain a modal curvature without a numerical differentiation procedure in order to circumvent the computing errors. Several damage indices based on modal curvatures that were developed to locate beam damage are employed. Both numerical and experimental studies are performed to validate the proposed approach. However, although previous studies have reported relative success with the application of these damage indices on a simple beam, only one damage index demonstrated the capability to locate damage when the stiffness of the local region changed near the sensor.展开更多
The ultimately exposed roof area(UERA)of goaf is crucial to the safety and economics of underground mining.The prediction models do not consider the mechanical weakness of rock mass and ignore the influence of the joi...The ultimately exposed roof area(UERA)of goaf is crucial to the safety and economics of underground mining.The prediction models do not consider the mechanical weakness of rock mass and ignore the influence of the joint damage factor,causing a large predicted exposure area with a high roof falling risk.This work adopted joint damage factor to derive a new UERA prediction model.The relationships between the UERA(S)and the span ratio(m),the density(k)and the diameter of fracture(d)were analysed by the new prediction model.The results showed that the exposed area S and the span ratio m have a U-shaped curve relationship.The S decreases with the increase of m and then increases when m is beyond 2.The exposed roof area S is in an inversely proportional power-law relationship with the fracture surface density k,and the curvature of the S-k relationship curve decreases when d=0.5 and k>7,and S is close to 0.There is a negative correlation between S and the fracture surface diameter d,the curvature of the S-d curve decreases with the increase of d and k,and the variation rate increases first and then decreases with the increase of d;when k=0.5 and d>9,S is close to 0.The predicted values of the UERA prediction model are 119.3,112.8,and 114.6 m2 with different joint damage parameters,which are slightly smaller than the actual critical exposure area of a roof(S=120 m2).The case study shows that the alternative prediction model is reasonable and acceptable and provides new theoretical support for the underground mining safety of sedimentary bauxite ore.展开更多
壤全氮、土壤有机质的测定对农业生产和科学研究都有重要意义。因此在许多实验室里,土壤全氮、土壤有机质都被作为一项常规分析项目。土壤全氮量的测定百余年来沿用杜马氏法和凯氏定氮法。测定土壤有机质的方法主要有3种:干烧法、化学...壤全氮、土壤有机质的测定对农业生产和科学研究都有重要意义。因此在许多实验室里,土壤全氮、土壤有机质都被作为一项常规分析项目。土壤全氮量的测定百余年来沿用杜马氏法和凯氏定氮法。测定土壤有机质的方法主要有3种:干烧法、化学氧化法、灼烧法,1989年农业部颁布了国标GB9843-88《土壤有机质测定法》。近年来使用元素分析仪(Elementar Vario MACRO)测定土壤C、N也越来越广泛,元素分析仪是一台用于快速,定量测定元素C、H、N、S的全自动分析仪。用元素分析仪测定C、H、N的方法属于灼烧法,灼烧温度为960摄氏度,对酸性、中性土壤的测定无疑是省时准确的首选。石灰性土壤中由于碳酸盐的存在,在高温灼烧时碳酸盐分解,形成CO2,使土壤有机质的测定结果偏高。降低燃烧管温度测定(630摄氏度),由于样品用锡箔纸包裹,锡箔纸在燃烧管内燃烧生成氧化锡为放热反应,增加燃烧管内的温度高于设定温度,增加碳酸钙的分解测定值偏高,燃烧管温度设定在低于碳酸盐分解点时仪器密封不严实,使测定结果偏低。用盐酸处理土壤中碳酸盐,其后测定有机质时,因土壤中的富里酸溶于酸,使测定结果偏低。因此元素分析仪不适于石灰性土壤有机质的测定。展开更多
An analysis of drill cores and well logs shows that the main micro-facies of the third member sand bodies of the Qingshankou Formation in Qian'an are subaqueous distributary channel facies, sheet sand facies and suba...An analysis of drill cores and well logs shows that the main micro-facies of the third member sand bodies of the Qingshankou Formation in Qian'an are subaqueous distributary channel facies, sheet sand facies and subaqueous fan facies (olistostrome). Maps showing the distribution of these micro-facies together with inter-channel bay and prodelta mocro-facies are presented for different time-slices (lower, middle and upper parts of the Qingshankou Formation). These maps reveal the instability and change of sediment transport in the Baokang sedimentary system during the depositional period. Sediment transport was from the west in the early stage, from the south in the middle stage and from the northwest in the late stage. Values of thickness, porosity and permeability of the sand bodies in the third member of the Qingshankou Formation show that they have low to medium porosity and low permeability, and are characterized by serious reservoir heterogeneity. The joints between micro-facies and subaqueous fan micro-facies are characterized by the highest heterogeneity, the sheet sand and distal sand bar subfacies come next, and the heterogeneity of the subaqueous distributary channel sand bodies is relatively weak.展开更多
In order to examine the seasonal and spatial distributions of benthic animals in the intertidal mudflat of the southern Yellow River Delta,field investigations were carried out in 2007 and 2008 and multiple methods we...In order to examine the seasonal and spatial distributions of benthic animals in the intertidal mudflat of the southern Yellow River Delta,field investigations were carried out in 2007 and 2008 and multiple methods were applied.Results showed that,the biomass of macro benthos ranged at 0.75-1151.00 g wet m^(-2) and averaged at 156.31 g wet m^(-2),in which Mactra veneriformis accounted for 75.6%-93.4% of the total macro benthic biomass.More than 90% of macro benthos inhabited in the middle and low tide lines,and higher biomass occurred in early summer and lower in winter.Statistical analysis showed that:1)M.veneriformis growth was primarily favored at higher temperature and lower salinity;2)after long time interaction,benthic bivalve grazers led to patching distributions of Chlorophyll a(Chl a);3)macro benthic biomass positively related with Chl a when the concentration of Chl a was low,but they were negatively related when Chl a concentration was high;and 4)furthermore,the biomass of benthic bivalves peaked in the sediment with median grain size about 0.55 mm,but decreased gradually in coarse or fine sediments.The secondary productivity ranged at 0.37-283.68 g m^(-2)yr^(-1) and averaged at 47.88 g m^(-2) yr^(-1),in which 69.7% was contributed by M.veneriformis It was estimated that primary production was transformed to secondary production at a rate of 6.87%approximately,which implies that there is a local sustainability of high bivalve production.展开更多
文摘Pile foundations are challenging to build due to subsurface obstacles, contractor ignorance, and difficulties with site planning. Given the unpredictable environment of the construction site, productivity losses during pile work are to be thought possible. Prior to finishing a site pre-investigation, a foundation’s area is usually sampled for statistical reasons. There are studies on pile construction outside of Bangladesh that are supported by relevant empirical data in the literature. Since Bangladesh, which is regarded as a third-world country, is ignored in this regard, the literature currently available about pile building and the associated productivity loss is unable to provide adequate information or appropriate empirical data. Due to this pile-building sector in Bangladesh has been experiencing a decline in production for quite some time now. Before attempting to increase productivity in pile construction, it is essential to investigate the potential losses and the variables that might have an influence. This study aims to accomplish the following objectives: 1) identify the primary factors that have an impact on pile construction;2) develop an SVR model that accurately predicts productivity loss;and 3) figure out the projected loss by basing it on the historical scenario that is the most comparable to the current one. A Support Vector Regression (SVR) model was developed after a study of the relevant literature. This model enabled the collection of 110 pile building projects from five significant locations in Bangladesh. The model was constructed using a list of eight inputs in addition to a list of five macro elements (labor, management, environment, material, and equipment) (soil condition, pile type, pile material, project size, project location, pile depth, pile quantity, and equipment quantity). Using 10-way cross validation, the SVR achieves an accuracy of 87.2% in its predictions. On the basis of what has occurred in the past, we are able to estimate that there will be a loss of around 18.55 percent of the total output. A new perspective for engineers studying the delay factors with productivity loss is provided by the outcome of important tasks as it relates to loss in productivity and overall factors faced. In the building construction industry, effective management should place more emphasis on the correlation between productivity loss and the factors that cause it. Therefore, to represent the effect on productivity loss, real factors can be summed up as a decline in productivity loss. The findings of the study would urge specialists to concentrate on waste as a means of increasing overall production.
文摘BACKGROUND Macro-aspartate aminotransferase(AST), a macroenzyme, is a high-molecular mass complex formed by self-polymerization or association with other serum components that are difficult for the kidney to clear, leading to the isolated elevation of serum AST activity. Cases of macro-AST formation are rare, with only 3 published in the English language literature up to September 2019 in China. In this paper, we present a case in which an asymptomatic woman with persistent isolated elevated AST was confirmed as having macro-AST by the polyethylene glycol precipitation method.CASE SUMMARY A 34-year-old woman was referred to our clinic for elevated AST levels with normal levels of other liver-associated enzymes on November 12, 2018. Her AST level of liver function test had been abnormal for 7 mo before she came to the clinic. The patient was asymptomatic with a normal physical examination. There was no relevant family history and no alcohol consumption or smoking. She had a several-month history of traditional Chinese medical taking and had stopped it 1 year prior. The laboratory tests in our clinic showed only the elevation of AST(89.5 U/L) with no other significant abnormalities. We performed the precipitation technique with polyethylene glycol to confirm the presence of macro-AST. Then for almost a year, her AST level still fluctuated in the abnormal range.CONCLUSION This case highlights that clinical physicians should be familiar with this rare condition of persistent isolated AST elevation due to the presence of macro-AST to avoid unnecessary investigation and patient anxiety.
文摘This paper is based on three observations and independent thinking of the classroom teaching of the author’s colleagues.It attempts to examine how macro and micro contexts affect teaching and learning in the classroom.The author focuses the discussion on three aspects:(i)the present EFL contextual setting in China;(ii)the influence of the evaluation system on both teachers and students;(iii)his own beliefs as a teacher.Finally,he comes to the implications that teachers should often reflect on their teaching by means of observing other teachers’teachings;In order to bring more effective teaching and learning to the class,Teachers should change their class from a teacher-centered one to a students-centered one.
文摘Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural health. Modal curvature-based damage detection techniques have recently garnered considerable attention from the research community, and have become a promising vibration-based structural health monitoring solution. However, computing errors arise when calculating modal curvatures from lateral mode shapes, which result from unavoidable measurement errors in the mode shapes as identified from lateral vibration signals; this makes curvature-based algorithms that use a lateral measurement only theoretically feasible, but practically infeasible. Therefore, in this study, long-gauge fiber Bragg grating strain sensors are employed to obtain a modal curvature without a numerical differentiation procedure in order to circumvent the computing errors. Several damage indices based on modal curvatures that were developed to locate beam damage are employed. Both numerical and experimental studies are performed to validate the proposed approach. However, although previous studies have reported relative success with the application of these damage indices on a simple beam, only one damage index demonstrated the capability to locate damage when the stiffness of the local region changed near the sensor.
基金This work is supported by the National Natural Science Foundation of China(51974135,51704094)the National Key Research and Development Program of China(2016YFC0600802).
文摘The ultimately exposed roof area(UERA)of goaf is crucial to the safety and economics of underground mining.The prediction models do not consider the mechanical weakness of rock mass and ignore the influence of the joint damage factor,causing a large predicted exposure area with a high roof falling risk.This work adopted joint damage factor to derive a new UERA prediction model.The relationships between the UERA(S)and the span ratio(m),the density(k)and the diameter of fracture(d)were analysed by the new prediction model.The results showed that the exposed area S and the span ratio m have a U-shaped curve relationship.The S decreases with the increase of m and then increases when m is beyond 2.The exposed roof area S is in an inversely proportional power-law relationship with the fracture surface density k,and the curvature of the S-k relationship curve decreases when d=0.5 and k>7,and S is close to 0.There is a negative correlation between S and the fracture surface diameter d,the curvature of the S-d curve decreases with the increase of d and k,and the variation rate increases first and then decreases with the increase of d;when k=0.5 and d>9,S is close to 0.The predicted values of the UERA prediction model are 119.3,112.8,and 114.6 m2 with different joint damage parameters,which are slightly smaller than the actual critical exposure area of a roof(S=120 m2).The case study shows that the alternative prediction model is reasonable and acceptable and provides new theoretical support for the underground mining safety of sedimentary bauxite ore.
文摘壤全氮、土壤有机质的测定对农业生产和科学研究都有重要意义。因此在许多实验室里,土壤全氮、土壤有机质都被作为一项常规分析项目。土壤全氮量的测定百余年来沿用杜马氏法和凯氏定氮法。测定土壤有机质的方法主要有3种:干烧法、化学氧化法、灼烧法,1989年农业部颁布了国标GB9843-88《土壤有机质测定法》。近年来使用元素分析仪(Elementar Vario MACRO)测定土壤C、N也越来越广泛,元素分析仪是一台用于快速,定量测定元素C、H、N、S的全自动分析仪。用元素分析仪测定C、H、N的方法属于灼烧法,灼烧温度为960摄氏度,对酸性、中性土壤的测定无疑是省时准确的首选。石灰性土壤中由于碳酸盐的存在,在高温灼烧时碳酸盐分解,形成CO2,使土壤有机质的测定结果偏高。降低燃烧管温度测定(630摄氏度),由于样品用锡箔纸包裹,锡箔纸在燃烧管内燃烧生成氧化锡为放热反应,增加燃烧管内的温度高于设定温度,增加碳酸钙的分解测定值偏高,燃烧管温度设定在低于碳酸盐分解点时仪器密封不严实,使测定结果偏低。用盐酸处理土壤中碳酸盐,其后测定有机质时,因土壤中的富里酸溶于酸,使测定结果偏低。因此元素分析仪不适于石灰性土壤有机质的测定。
文摘An analysis of drill cores and well logs shows that the main micro-facies of the third member sand bodies of the Qingshankou Formation in Qian'an are subaqueous distributary channel facies, sheet sand facies and subaqueous fan facies (olistostrome). Maps showing the distribution of these micro-facies together with inter-channel bay and prodelta mocro-facies are presented for different time-slices (lower, middle and upper parts of the Qingshankou Formation). These maps reveal the instability and change of sediment transport in the Baokang sedimentary system during the depositional period. Sediment transport was from the west in the early stage, from the south in the middle stage and from the northwest in the late stage. Values of thickness, porosity and permeability of the sand bodies in the third member of the Qingshankou Formation show that they have low to medium porosity and low permeability, and are characterized by serious reservoir heterogeneity. The joints between micro-facies and subaqueous fan micro-facies are characterized by the highest heterogeneity, the sheet sand and distal sand bar subfacies come next, and the heterogeneity of the subaqueous distributary channel sand bodies is relatively weak.
基金supported by the National Natural Science Foundation of China(No.41176064)NSFC-Shandong Joint Fund for Marine Science Research Centers(No.U1406403)
文摘In order to examine the seasonal and spatial distributions of benthic animals in the intertidal mudflat of the southern Yellow River Delta,field investigations were carried out in 2007 and 2008 and multiple methods were applied.Results showed that,the biomass of macro benthos ranged at 0.75-1151.00 g wet m^(-2) and averaged at 156.31 g wet m^(-2),in which Mactra veneriformis accounted for 75.6%-93.4% of the total macro benthic biomass.More than 90% of macro benthos inhabited in the middle and low tide lines,and higher biomass occurred in early summer and lower in winter.Statistical analysis showed that:1)M.veneriformis growth was primarily favored at higher temperature and lower salinity;2)after long time interaction,benthic bivalve grazers led to patching distributions of Chlorophyll a(Chl a);3)macro benthic biomass positively related with Chl a when the concentration of Chl a was low,but they were negatively related when Chl a concentration was high;and 4)furthermore,the biomass of benthic bivalves peaked in the sediment with median grain size about 0.55 mm,but decreased gradually in coarse or fine sediments.The secondary productivity ranged at 0.37-283.68 g m^(-2)yr^(-1) and averaged at 47.88 g m^(-2) yr^(-1),in which 69.7% was contributed by M.veneriformis It was estimated that primary production was transformed to secondary production at a rate of 6.87%approximately,which implies that there is a local sustainability of high bivalve production.