A Cost-benefit Measuring Model of Green Products in Manufacturing Industry

The paper builds up a cost-benefit measuring model of green products in manufacturing industry throughout its full life cycle, which can quantify green products＇ cost and benefit completely and correctly under the circumstance of satisfying enterprise, customer, environment and society. It also puts forth an operable method to estimate social benefit by opportunity cost and establishes a profit maximization-programming model. The model can be applied to justify whether some kinds of green products should be developed and produced.

Multiple Measurement Models of Articulated Arm Coordinate Measuring Machines

The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable calibration parameters. To compensate for the deficiency of one measurement model, the multiple measurement models are built by the Denavit-Hartenberg＇s notation, the homemade standard rod components are used as a calibration tool and the Levenberg-Marquardt calibration algorithm is applied to solve the structural parameters in the measurement models. During the tests of multiple measurement models, the sample areas are selected in two situations. It is found that the measurement errors＇ sigma value（0.083 4 ram） dealt with one measurement model is nearly two times larger than that of the multiple measurement models（0.043 1 ram） in the same sample area. While in the different sample area, the measurement errors＇ sigma value（0.054 0 ram） dealt with the multiple measurement models is about 40% of one measurement model（0.137 3 mm）. The preliminary results suggest that the measurement accuracy of AACMM dealt with multiple measurement models is superior to the accuracy of the existing machine with one measurement model. This paper proposes the multiple measurement models to improve the measurement accuracy of AACMM without increasing any hardware cost.

A FGR Software Model for Measuring the Effect of Technological Progress

The work of quantitative studying the effect of technological progress on economic growth, being of great complexity and far-reaching significance, has become a quite popular research topic in the world. In recent years there are a large number of scientists who are engaged in this research both at home and abroad.

Spatiotemporal characteristics of cultivated land use eco-efficiency and its influencing factors in China from 2000 to 2020

Improving cultivated land use eco-efficiency(CLUE)can effectively promote agricultural sustainability,particularly in developing countries where CLUE is generally low.This study used provincial-level data from China to evaluate the spatiotemporal evolution of CLUE from 2000 to 2020 and identified the influencing factors of CLUE by using a panel Tobit model.In addition,given the undesirable outputs of agricultural production,we incorporated carbon emissions and nonpoint source pollution into the global benchmark-undesirable output-super efficiency-slacks-based measure(GB-US-SBM)model,which combines global benchmark technology,undesirable output,super efficiency,and slacks-based measure.The results indicated that there was an upward trend in CLUE in China from 2000 to 2020,with an increase rate of 2.62%.The temporal evolution of CLUE in China could be classified into three distinct stages:a period of fluctuating decrease(2000-2007),a phase of gradual increase(2008-2014),and a period of rapid growth(2015-2020).The major grain-producing areas(MPAs)had a lower CLUE than their counterparts,namely,non-major grain-production areas(non-MPAs).The spatial agglomeration effect followed a northeast-southwest strip distribution;and the movement path of barycentre revealed a"P"shape,with Luoyang City,Henan Province,as the centre.In terms of influencing factors of CLUE,investment in science and technology played the most vital role in improving CLUE,while irrigation index had the most negative effect.It should be noted that these two influencing factors had different impacts on MPAs and non-MPAs.Therefore,relevant departments should formulate policies to enhance the level of science and technology,improve irrigation condition,and promote sustainable utilization of cultivated land.

A New Device for Gas-Liquid Flow Measurements Relying on Forced Annular Flow

A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.

Unascertained measurement classifying model of goal collapse prediction

Based on optimized forecast method of unascertained classifying,a unascer- tained measurement classifying model (UMC) to predict mining induced goaf collapse was established,The discriminated factors of the model are influential factors including over- burden layer type,overburden layer thickness,the complex degree of geologic structure, the inclination angle of coal bed,volume rate of the cavity region,the vertical goaf depth from the surface and space superposition layer of the goaf region.Unascertained mea- surement (UM) function of each factor was calculated.The unascertained measurement to indicate the classification center and the grade of waiting forecast sample was determined by the UM distance between the synthesis index of waiting forecast samples and index of every classification.The training samples were tested by the established model,and the correct rate is 100%.Furthermore,the seven waiting forecast samples were predicted by the UMC model.The results show that the forecast results are fully consistent with the ac- tual situation.

Soft measurement model of ring's dimensions for vertical hot ring rolling process using neural networks optimized by genetic algorithm

Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.

Singularity of Some Software Reliability Models and Parameter Estimation Method

According to the principle, “The failure data is the basis of software reliability analysis”, we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out the conclusion from the fitting results of failure data of a software project, the SRES can recommend users “the most suitable model” as a software reliability measurement model. We believe that the SRES can overcome the inconsistency in applications of software reliability models well. We report investigation results of singularity and parameter estimation methods of experimental models in SRES.

Evaluation of the sustainable development level of countries along the Belt and Road and its impact factors:Empirical analysis based on the Super-efficiency slacks-based measure and Tobit measure models

Sustainable development is an important component of the Belt and Road Initiative(BRI)and is of great significance for evaluating the levels of sustainable development of countries along this route(henceforth,BRI countries).Therefore,this study aims to identify the factors that influence the levels of sustainable development of BRI countries in a reasonable and objective manner.Eventually,this study employs the super efficiency slacks-based measure(Super-SBM)model,which considers unexpected outputs to measure the level of sustainable development of BRI countries.The dynamic change and composition of the sustainable development level of these countries are calculated using the global Malmquist-Luenberger index.Furthermore,the Tobit model is used to identify the factors influencing the level of sustainable development of BRI countries in general and in various categories.The empirical results suggest the following points.(a)The overall level of sustainable development of BRI countries is low,whereas those of high-income and middle-and high-income countries are relatively high.(b)The overall sustainable development levels of BRI countries declined to a certain extent in 2008 owing to the effect of the financial crisis,.However,the sustainable development level of other countries,barring low-income countries,has gradually increased since 2011.(c)Since 2008,technological progress has replaced technical efficiency as the main driving force behind the improvement of the sustainable development level of BRI countries.(d)A U-shaped relationship is observed between the economic and sustainable development levels of these countries.(e)The level of science and technology and the proportion of renewable energy consumption can promote the sustainable development of these countries.Moreover,a negative correlation exists between the level of opening to the outside world and that of sustainable development of countries that mainly export resource-based products and are dominated by labor-intensive export industries.Barring low-income countries,the energy structure plays an effective role in improving the level of sustainable development.Finally,the study presents suggestions for China in the process of coping with the sustainable development of relevant countries during its promotion of the BRI.

Experimental and modelling study of the solubility of CO_2 in various CaCl_2 solutions at different temperatures and pressures

Study of the thermodynamic behaviour of CaCl2-H2O-CO2 systems is important in different scientific areas in the chemical and petroleum engineering fields. For example, a system including salt- H20-CO2 is a common system in CO2 geological storage. During carbonate matrix acidizing, this mixture also appears as the spent acid. Hence, study of the behaviour of this system and the solubility of CO2 in CaCl2 brine in different thermodynamic conditions is critical. In this study, CO2 solubility in 0, 1.90 and 4.80 mol/L CaCl2 solutions at 328.15 to 375.15 K and 68.9 to 206.8 bar were measured. These values are normal for oil reservoirs. A popular thermodynamic model is available in the literature for estimating the CO2 solubility in pure water and NaC1 solutions. In this paper, the available model was modified by experimental work to be applicable for CaCl2 as well. Based on the measured data, the component interaction parameters in the base model were adjusted for a CaCl2-H2O-CO2 system. The developed model could predict CO2 solubility in different conditions with remarkable accuracy, particularly for high concentration solutions and at high pressures. This improvement is up to 65% better than in the base model. This model can be used in Darcy scale models for predicting wormhole propagation during carbonate matrix acidizing.

Study and application of monitoring plane displacement of a similarity model based on time-series images

In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring method was proposed in this study,and the major steps of the monitoring method include:firstly,time-series images of the similarity model in the test were obtained by a camera,and secondly,measuring points marked as artificial targets were automatically tracked and recognized from time-series images.Finally,the real-time plane displacement field was calculated by the fixed magnification between objects and images under the specific conditions.And then the application device of the method was designed and tested.At the same time,a sub-pixel location method and a distortion error model were used to improve the measuring accuracy.The results indicate that this method may record the entire test,especially the detailed non-uniform deformation and sudden deformation.Compared with traditional methods this method has a number of advantages,such as greater measurement accuracy and reliability,less manual intervention,higher automation,strong practical properties,much more measurement information and so on.

A Learning-Based Channel Model for Synergetic Transmission Technology

It is extensively approved that Channel State Information(CSI) plays an important role for synergetic transmission and interference management. However, pilot overhead to obtain CSI with enough precision is a significant issue for wireless communication networks with massive antennas and ultra-dense cell. This paper proposes a learning- based channel model, which can estimate, refine, and manage CSI for a synergetic transmission system. It decomposes the channel impulse response into multiple paths, and uses a learning-based algorithm to estimate paths' parameters without notable degradation caused by sparse pilots. Both indoor measurement and outdoor measurement are conducted to verify the feasibility of the proposed channel model preliminarily.

Singularity of Software Reliability Models LVLM and LVQM

According to the principle, “The failure data is the basis of software reliabilityanalysis”, we built a software reliability expert system (SRES) by adopting the artificialtechnology. By reasoning out the conclusion from the fitting results of failure data of asoftware project, the SRES can recommend users “the most suitable model” as a softwarereliability measurement model. We believe that the SRES can overcome the inconsistency inapplications of software reliability models well. We report investigation results of singularity and parameter estimation methods of models, LVLM and LVQM.

Modeling Multisource-heterogeneous Information Based on Random Set and Fuzzy Set Theory

This paper presents a new idea, named as modeling multisensor-heterogeneous information, to incorporate the fuzzy logic methodologies with mulitsensor-multitarget system under the framework of random set theory. Firstly, based on strong random set and weak random set, the unified form to describe both data (unambiguous information) and fuzzy evidence (uncertain information) is introduced. Secondly, according to signatures of fuzzy evidence, two Bayesian-markov nonlinear measurement models are proposed to fuse effectively data and fuzzy evidence. Thirdly, by use of "the models-based signature-matching scheme", the operation of the statistics of fuzzy evidence defined as random set can be translated into that of the membership functions of relative point state variables. These works are the basis to construct qualitative measurement models and to fuse data and fuzzy evidence.

The Establishment of Measurement Model and Implementation Strategy for Service Productivity

As a key factor of economic growth, productivity has been valued in the academic community. Today, with the rapid development of service industry, the research for service productivity has also attracted wide attention. However, in the service industry, because of its own characteristics and properties, measurement of service productivity could not apply for the traditional productivity measurement methods simply. This research first has put out the constitution model of service productivity, and thus put out the measurement model of service productivity. And explains that service productivity is a function which contains internal efficiency, external efficiency, and capacity efficiency. In service productivity, external efficiency is the key one, internal efficie and capacity efficiency should also be given considerations. Eventually, the strategy of implementing measurement of service productivity have been proposed ncy the

MEASUREMENT METHOD AND PHYSICAL MODEL OF VSC CONDUCTIVITY AND ITS APPLICATIONS IN CONDUCTING POLYMERS

Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.

ZTE Communications Special Issue on Channel Measurement and Modeling for Heterogeneous 5G

While cellular networks have continuously evolved in re- cent years, the industry has clearly seen unprecedented chal- lenges to meet the exponentially growing expectations in the near future. The 5G system is facing grand challenges such as the ever-increasing traffic volumes and remarkably diver- sified services connecting humans and machines alike. As a result, the future network has to deliver massively increased capacity, greater flexibility, incorporated computing capabili- ty, support of significantly extended battery lifetime, and ac- commodation of varying payloads with fast setup and low latency, etc. In particular, as 5G requires more spectrum resource, higher frequency bands are desirable. Nowadays, millimeter wave has been widely accepted as one of the main communication bands for 5G.

ZTE Communications Special Issue on Channel Measurement and Modeling for Heterogeneous 5G

While cellular networks have continuously evolved in recent years, the industry has clearly seen unprecedented challenges to meet the exponentially growing expectations in the near future.

ANN model of subdivision error based on genetic algorithm

According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision errors are mainly due to the rotary-type inductosyn itself. For the characteristic of cyclical change, the subdivision errors in other measuring cycles can be compensated by the subdivision error model in one measuring cycle. Using the measured error data as training samples, combining GA and BP algorithm, an ANN model of subdivision error is designed. Simulation results indicate that GA reduces the uncertainty in the training process of the ANN model, and enhances the generalization of the model. Compared with the error model based on the least-mean-squared method, the designed ANN model of subdivision errors can achieve higher compensating precision.

Polarization Projection for 3D Geometry-Based Stochastic Channel Model

Comprehensive radiation characteristics of polarized antenna are crucial in creating practical channel coefficients for next generation wireless communication system designs.Being currently supported within3 D geometry-based stochastic channel models(GSCM),field patterns are technically obtained by chamber measurement(or by its best fitting).However,in some channel related performance analysis scenarios,design insight can be crystallized better by starting the derivations with theoretical co-polarization and cross-polarization components.Specifically,these two components are mathematically linked with field patterns through the proposed polarization projection algorithm.In this manuscript,we focus on revealing the transformation criterion of polarization states between the antenna plane and the propagation plane.In practice,it makes retrieving the field patterns by electromagnetic computation possible.Meanwhile,the impact imposed by distinct antenna orientations is geometrically illustrated and consequently incorporated into the proposed algorithm.This will further facilitate flexible performance evaluation of related radio transmission technologies.Our conclusions are verified by the closed-form expression of the dipole field pattern(via an analytical approach) and by chamber measurement results.Moreover,we find that its 2D degenerative case is aligned with the definitions in 3^(rd) generation partnership project(3GPP)technical report 25.996.The most obvious benefit of the proposed algorithm is to significantly reduce the cost on generating channel coefficients in GSCM simulation.