Anomaly-Resistant Decentralized State Estimation Under Minimum Error Entropy With Fiducial Points for Wide-Area Power Systems

This paper investigates the anomaly-resistant decentralized state estimation(SE) problem for a class of wide-area power systems which are divided into several non-overlapping areas connected through transmission lines. Two classes of measurements(i.e., local measurements and edge measurements) are obtained, respectively, from the individual area and the transmission lines. A decentralized state estimator, whose performance is resistant against measurement with anomalies, is designed based on the minimum error entropy with fiducial points(MEEF) criterion. Specifically, 1) An augmented model, which incorporates the local prediction and local measurement, is developed by resorting to the unscented transformation approach and the statistical linearization approach;2) Using the augmented model, an MEEF-based cost function is designed that reflects the local prediction errors of the state and the measurement;and 3) The local estimate is first obtained by minimizing the MEEF-based cost function through a fixed-point iteration and then updated by using the edge measuring information. Finally, simulation experiments with three scenarios are carried out on the IEEE 14-bus system to illustrate the validity of the proposed anomaly-resistant decentralized SE scheme.

Enhanced kernel minimum squared error algorithm and its application in face recognition

To improve the classification performance of the kernel minimum squared error（ KMSE）, an enhanced KMSE algorithm（ EKMSE） is proposed. It redefines the regular objective function by introducing a novel class label definition, and the relative class label matrix can be adaptively adjusted to the kernel matrix.Compared with the common methods, the newobjective function can enlarge the distance between different classes, which therefore yields better recognition rates. In addition, an iteration parameter searching technique is adopted to improve the computational efficiency. The extensive experiments on FERET and GT face databases illustrate the feasibility and efficiency of the proposed EKMSE. It outperforms the original MSE, KMSE,some KMSE improvement methods, and even the sparse representation-based techniques in face recognition, such as collaborate representation classification（ CRC）.

Analysis of Sampling Error Uncertainties and Trends in Maximum and Minimum Temperatures in China

In this paper we report an analysis of sampling error uncertainties in mean maximum and minimum temperatures （Tmax and Tmin） carried out on monthly,seasonal and annual scales,including an examination of homogenized and original data collected at 731 meteorological stations across China for the period 1951-2004.Uncertainties of the gridded data and national average,linear trends and their uncertainties,as well as the homogenization effect on uncertainties are assessed.It is shown that the sampling error variances of homogenized Tmax and Tmin,which are larger in winter than in summer,have a marked northwest-southeast gradient distribution,while the sampling error variances of the original data are found to be larger and irregular.Tmax and Tmin increase in all months of the year in the study period 1951-2004,with the largest warming and uncertainties being 0.400℃ （10 yr）-1 ＋ 0.269℃ （10 yr）-1 and 0.578℃ （10 yr）-1 ＋ 0.211℃ （10 yr）-1 in February,and the least being 0.022℃ （10 yr）-1 ＋ 0.085℃ （10 yr）-1 and 0.104℃ （10 yr）-1 ＋0.070℃ （10 yr）-1 in August.Homogenization can remove large uncertainties in the original records resulting from various non-natural changes in China.

Low Complexity Minimum Mean Square Error Channel Estimation for Adaptive Coding and Modulation Systems

Performance of the Adaptive Coding and Modulation(ACM) strongly depends on the retrieved Channel State Information(CSI),which can be obtained using the channel estimation techniques relying on pilot symbol transmission.Earlier analysis of methods of pilot-aided channel estimation for ACM systems were relatively little.In this paper,we investigate the performance of CSI prediction using the Minimum Mean Square Error(MMSE)channel estimator for an ACM system.To solve the two problems of MMSE:high computational operations and oversimplified assumption,we then propose the Low-Complexity schemes(LC-MMSE and Recursion LC-MMSE(R-LC-MMSE)).Computational complexity and Mean Square Error(MSE) are presented to evaluate the efficiency of the proposed algorithm.Both analysis and numerical results show that LC-MMSE performs close to the wellknown MMSE estimator with much lower complexity and R-LC-MMSE improves the application of MMSE estimation to specific circumstances.

NEW APPROACH FOR RELIABILITY-BASED DESIGN OPTIMIZATION:MINIMUM ERROR POINT

Conventional reliability-based design optimization （RBDO） requires to use the most probable point （MPP） method for a probabilistic analysis of the reliability constraints. A new approach is presented, called as the minimum error point （MEP） method or the MEP based method, for reliability-based design optimization, whose idea is to minimize the error produced by approximating performance functions. The MEP based method uses the first order Taylor＇s expansion at MEP instead of MPP. Examples demonstrate that the MEP based design optimization can ensure product reliability at the required level, which is very imperative for many important engineering systems. The MEP based reliability design optimization method is feasible and is considered as an alternative for solving reliability design optimization problems. The MEP based method is more robust than the commonly used MPP based method for some irregular performance functions.

Recursive weighted least squares estimation algorithm based on minimum model error principle

Kalman filter is commonly used in data filtering and parameters estimation of nonlinear system,such as projectile's trajectory estimation and control.While there is a drawback that the prior error covariance matrix and filter parameters are difficult to be determined,which may result in filtering divergence.As to the problem that the accuracy of state estimation for nonlinear ballistic model strongly depends on its mathematical model,we improve the weighted least squares method(WLSM)with minimum model error principle.Invariant embedding method is adopted to solve the cost function including the model error.With the knowledge of measurement data and measurement error covariance matrix,we use gradient descent algorithm to determine the weighting matrix of model error.The uncertainty and linearization error of model are recursively estimated by the proposed method,thus achieving an online filtering estimation of the observations.Simulation results indicate that the proposed recursive estimation algorithm is insensitive to initial conditions and of good robustness.

Geometric Approximation Technique for Minimum Zone Sphericity Error

The mathematical modeling for evaluation of the sphericity error is proposed with minimum radial separation center. To obtain the minimum sphericity error from the form data, a geometric approximation technique was devised. The technique regarded the least square sphere center as the initial center of the concentric spheres containing all measurement points, and then the center was moved gradually to reduce the radial separation till the minimum radial separation center was got where the constructed concentric spheres conformed to the minimum zone condition. The method was modeled firstly, then the geometric approximation process was analyzed, and finally,the software for data processing was programmed. As evaluation example, five steel balls were measured and the measurement data were processed with the developed program. The average iteration times of the approximation technique is 4.2, and on average the obtained sphericity error is 0. 529μm smaller than the least square solution,with accuracy increased by 7. 696%.

Cubature Kalman Filter Under Minimum Error Entropy With Fiducial Points for INS/GPS Integration

Traditional cubature Kalman filter(CKF)is a preferable tool for the inertial navigation system(INS)/global positioning system(GPS)integration under Gaussian noises.The CKF,however,may provide a significantly biased estimate when the INS/GPS system suffers from complex non-Gaussian disturbances.To address this issue,a robust nonlinear Kalman filter referred to as cubature Kalman filter under minimum error entropy with fiducial points(MEEF-CKF)is proposed.The MEEF-CKF behaves a strong robustness against complex nonGaussian noises by operating several major steps,i.e.,regression model construction,robust state estimation and free parameters optimization.More concretely,a regression model is constructed with the consideration of residual error caused by linearizing a nonlinear function at the first step.The MEEF-CKF is then developed by solving an optimization problem based on minimum error entropy with fiducial points(MEEF)under the framework of the regression model.In the MEEF-CKF,a novel optimization approach is provided for the purpose of determining free parameters adaptively.In addition,the computational complexity and convergence analyses of the MEEF-CKF are conducted for demonstrating the calculational burden and convergence characteristic.The enhanced robustness of the MEEF-CKF is demonstrated by Monte Carlo simulations on the application of a target tracking with INS/GPS integration under complex nonGaussian noises.

A New Regularized Minimum Error Thresholding Method

To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of probability distribution,one proposes the regularized minimum error threshold method and treats the traditional minimum error threshold method as its special case.Then one constructs the discrete probability distribution by using the separation between segmentation threshold and the average gray-scale values of the object and background of the image so as to compute the information energy of the probability distribution.The impact of the regularized parameter selection on the optimal segmentation threshold of the regularized minimum error threshold method is investigated.To verify the effectiveness of the proposed regularized minimum error threshold method,one selects typical grey-scale images and performs segmentation tests.The segmentation results obtained by the regularized minimum error threshold method are compared with those obtained with the traditional minimum error threshold method.The segmentation results and their analysis show that the regularized minimum error threshold method is feasible and produces more satisfactory segmentation results than the minimum error threshold method.It does not exert much impact on object acquisition in case of the addition of a certain noise to an image.Therefore,the method can meet the requirements for extracting a real object in the noisy environment.

Roundness error evaluation by minimum zone circle via microscope inspection

Utilizing the convex hull theory, a novel minimum zone circle （MZC） method, named im- proved minimum zone circle （IMZC） was developed in this paper. There were three steps for IMZC to evaluate the roundness error. Firstly, with the convex hull algorithm, data points on the circle contour were categorized into two sets to determine two concentric circles which contained all points of the contour. Secondly, vertexes of the minimum circumscribed circle and the maximum inscribed circle were found out from the previously determined two sets, and then four tangent points for de- termining the two concentric circles were also found out. Lastly, according to the evaluation using the MZC method, the roundness error was figured out. In this paper l IMZC was used to evaluate roundness errors of some micro parts. The evaluation results showed that the measurement precision using the IMZC method was higher than the least squared circle （LSC） method for the same set of data points, and IMZC had the same accuracy as the traditional MZC but dramatically shortened com- putation time. The computation time of IMZC was 6. 89% of the traditional MZC.

RAYLEIGH-DISTRIBUTION BASED MINIMUM ERROR THRESHOLDING FOR SAR IMAGES

This paper presents a minimum error thresholding (MET) algorithm under the hypothesis that the gray level histogram of SAR image fits to a mixture model of shifted Rayleigh distribution. This algorithm is applied to real SAR images and compared with traditional Otsu algorithm and other MET algorithms based on various models of histogram. The hypothesis of using Rayleigh distribution model is confirmed by Kolmogorov-Smirnov testing and the comparison results obtained show that the proposed new algorithm has good performance in thresholding SAR images.

Complementarity via Minimum Error Measurement in a Two-Path Interferometer

We study the fringe visibility and the which-path information(WPI) of a general Mach-Zehnder interferometer with an asymmetric beam splitter(BS). A minimum error measurement in the detector is used to extract the WPI. Both the fringe visibility V and the WPI I_(path) are affected by the initial state of the photon and the second asymmetric BS. The condition in which the WPI takes the maximum is obtained. The complementarity relationship V^2 + I_(path)~2 ≤ 1 is found, and the conditions for equality are also presented.

Lower bound on BER performance for maximal ratio combining with weighting errors

The theoretical lower bounds on mean squared channel estimation errors for typical fading channels are presented by the infinite-length and non-causal Wiener filter and the exact closed-form expressions of the lower bounds for different channel Doppler spectra are derived. Based on the obtained lower bounds on mean squared channel estimation errors, the limits on bit error rate （BER） for maximal ratio combining （MRC） with Gaussian distributed weighting errors on independent and identically distributed （i. i. d） fading channels are presented. Numerical results show that the BER performances of ideal MRC are the lower bounds on the BER performances of non-ideal MRC and deteriorate as the maximum Doppler frequency increases or the SNR of channel estimate decreases.

RESEARCH ON THE MINIMUM ZONE CYLINDRICITY EVALUATION BASED ON GENETIC ALGORITHMS

A genetic algorithm (GA)-based method is proposed to solve the nonlinearoptimization problem of minimum zone cylindricity evaluation. First, the background of the problemis introduced. Then the mathematical model and the fitness function are derived from themathematical definition of dimensioning and tolerancing principles. Thirdly with the least squaressolution as the initial values, the whole implementation process of the algorithm is realized inwhich some key techniques, for example, variables representing, population initializing and suchbasic operations as selection, crossover and mutation, are discussed in detail. Finally, examplesare quoted to verify the proposed algorithm. The computation results indicate that the GA-basedoptimization method performs well on cylindricity evaluation. The outstanding advantages concludehigh accuracy, high efficiency and capabilities of solving complicated nonlinear and large spaceproblems.

Monte Carlo Method for the Uncertainty Evaluation of Spatial Straightness Error Based on New Generation Geometrical Product Specification

Straightness error is an important parameter in measuring high-precision shafts. New generation geometrical product speeifieation（GPS） requires the measurement uncertainty characterizing the reliability of the results should be given together when the measurement result is given. Nowadays most researches on straightness focus on error calculation and only several research projects evaluate the measurement uncertainty based on ＂The Guide to the Expression of Uncertainty in Measurement（GUM）＂. In order to compute spatial straightness error（SSE） accurately and rapidly and overcome the limitations of GUM, a quasi particle swarm optimization（QPSO） is proposed to solve the minimum zone SSE and Monte Carlo Method（MCM） is developed to estimate the measurement uncertainty. The mathematical model of minimum zone SSE is formulated. In QPSO quasi-random sequences are applied to the generation of the initial position and velocity of particles and their velocities are modified by the constriction factor approach. The flow of measurement uncertainty evaluation based on MCM is proposed, where the heart is repeatedly sampling from the probability density function（PDF） for every input quantity and evaluating the model in each case. The minimum zone SSE of a shaft measured on a Coordinate Measuring Machine（CMM） is calculated by QPSO and the measurement uncertainty is evaluated by MCM on the basis of analyzing the uncertainty contributors. The results show that the uncertainty directly influences the product judgment result. Therefore it is scientific and reasonable to consider the influence of the uncertainty in judging whether the parts are accepted or rejected, especially for those located in the uncertainty zone. The proposed method is especially suitable when the PDF of the measurand cannot adequately be approximated by a Gaussian distribution or a scaled and shifted t-distribution and the measurement model is non-linear.

Measurement Uncertainty Evaluation of Conicity Error Inspected on CMM

The cone is widely used in mechanical design for rotation, centering and fixing. Whether the conicity error can be measured and evaluated accurately will directly influence its assembly accuracy and working performance. According to the new generation geometrical product specification（GPS）, the error and its measurement uncertainty should be evaluated together. The mathematical model of the minimum zone conicity error is established and an improved immune evolutionary algorithm（IlEA） is proposed to search for the conicity error. In the IIEA, initial antibodies are firstly generated by using quasi-random sequences and two kinds of affinities are calculated. Then, each antibody clone is generated and they are self-adaptively mutated so as to maintain diversity. Similar antibody is suppressed and new random antibody is generated. Because the mathematical model of conicity error is strongly nonlinear and the input quantities are not independent, it is difficult to use Guide to the expression of uncertainty in the measurement（GUM） method to evaluate measurement uncertainty. Adaptive Monte Carlo method（AMCM） is proposed to estimate measurement uncertainty in which the number of Monte Carlo trials is selected adaptively and the quality of the numerical results is directly controlled. The cone parts was machined on lathe CK6140 and measured on Miracle NC 454 Coordinate Measuring Machine（CMM）. The experiment results confirm that the proposed method not only can search for the approximate solution of the minimum zone conicity error（MZCE） rapidly and precisely, but also can evaluate measurement uncertainty and give control variables with an expected numerical tolerance. The conicity errors computed by the proposed method are 20%-40% less than those computed by NC454 CMM software and the evaluation accuracy improves significantly.

Simulation research on a minimum root-mean-square error rotation-fitting algorithm for gravity matching navigation

Gravity/inertial combination navigation is a leading issue in realizing passive navigation onboard a submarine. A new rotation-fitting gravity matching algorithm, based on the Terrain Contour Matching (TERCOM) algorithm, is proposed in this paper. The algorithm is based on the principle of least mean-square-error criterion, and searches for a certain matched trajectory that runs parallel to a trace indicated by an inertial navigation system on a gravity base map. A rotation is then made clockwise or counterclockwise through a certain angle around the matched trajectory to look for an optimal matched trajectory within a certain angle span range, and through weighted fitting with another eight suboptimal matched trajectories, the endpoint of the fitted trajectory is considered the optimal matched position. In analysis of the algorithm reliability and matching error, the results from simulation indicate that the optimal position can be obtained effectively in real time, and the positioning accuracy improves by 35% and up to 1.05 nautical miles using the proposed algorithm compared with using the widely employed TERCOM and SITAN methods. Current gravity-aided navigation can benefit from implementation of this new algorithm in terms of better reliability and positioning accuracy.

ALGORITHM FOR SPHERICITY ERROR AND THE NUMBER OF MEASURED POINTS

The data processing technique and the method determining the optimal number of measured points are studied aiming at the sphericity error measured on a coordinate measurement machine （CMM）. The consummate criterion for the minimum zone of spherical surface is analyzed first, and then an approximation technique searching for the minimum sphericity error from the form data is studied. In order to obtain the minimum zone of spherical surface, the radial separation is reduced gradually by moving the center of the concentric spheres along certain directions with certain steps. Therefore the algorithm is precise and efficient. After the appropriate mathematical model for the approximation technique is created, a data processing program is developed accordingly. By processing the metrical data with the developed program, the spherical errors are evaluated when different numbers of measured points are taken from the same sample, and then the corresponding scatter diagram and fit curve for the sample are graphically represented. The optimal number of measured points is determined through regression analysis. Experiment shows that both the data processing technique and the method for determining the optimal number of measured points are effective. On average, the obtained sphericity error is 5.78 μm smaller than the least square solution, whose accuracy is increased by 8.63%; The obtained optimal number of measured points is half of the number usually measured.

A GENERALIZED QUASI MINIMAL BACKWARD ERROR (GQMBACK) ALGORITHM FOR NONSYMMETRIC LINEAR SYSTEMS

Orthogonal projection methods have been widely used to solve linear systems. Little attention has been given to oblique projection methods, but the class of oblique projection methods is particularly attractive for large nonsymmetric systems. The purpose of this paper is to consider a criterion for judging whether a given appro ximation is acceptable and present an algorithm which computes an approximate solution to the linear systems Ax=b such that the normwise backward error meets some optimality condition.

Geometric Approximation Searching Algorithm for Spatial Straightness Error Evaluation

Considering the characteristics of spatial straightness error, this paper puts forward a kind of evaluation method of spatial straightness error using Geometric Approximation Searching Algorithm (GASA). According to the minimum condition principle of form error evaluation, the mathematic model and optimization objective of the GASA are given. The algorithm avoids the optimization and linearization, and can be fulfilled in three steps. First construct two parallel quadrates based on the preset two reference points of the spatial line respectively;second construct centerlines by connecting one quadrate each vertices to another quadrate each vertices;after that, calculate the distances between measured points and the constructed centerlines. The minimum zone straightness error is obtained by repeating comparing and reconstructing quadrates. The principle and steps of the algorithm to evaluate spatial straightness error is described in detail, and the mathematical formula and program flowchart are given also. Results show that this algorithm can evaluate spatial straightness error more effectively and exactly.