Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce d...Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.展开更多
Activated carbon obtained from Astragalus residue was chemically activated by KOH and modified with KMnO4.The samples were characterized by N2 adsorption,Fourier transform infrared spectroscopy,X-ray diffractometry,sc...Activated carbon obtained from Astragalus residue was chemically activated by KOH and modified with KMnO4.The samples were characterized by N2 adsorption,Fourier transform infrared spectroscopy,X-ray diffractometry,scanning electron microscopy,and Boehm titration.Accordingly,the original and modified carbon materials were used for the removal of Cd2+from aqueous solution by batch adsorption experiments.Results showed that the contents of oxygen-containing functional groups increased,and MnO2 was nearly uniformly deposited on the surface of activated carbon after modification by KMnO4.The adsorption kinetics was described by pseudo-second order model.Langmuir model fitted the adsorption-isotherm experimental data of Cd2+better than the Freundlich model.The maximum adsorption capacities of the activated carbon before and after modification for Cd2+were 116.96 and 217.00 mg/g,respectively.KMnO4 considerably changed the physicochemical properties and surface texture of activated carbon and enhanced the adsorption capacity of activated carbon for Cd2+.展开更多
In order to develop the high photocatalytic activity of TiO2 under visible light as that under ultraviolet light and make it easy to be separated from treated liquor, a visible light response and spherical activated c...In order to develop the high photocatalytic activity of TiO2 under visible light as that under ultraviolet light and make it easy to be separated from treated liquor, a visible light response and spherical activated carbon （SAC） supported photocatalyst doped with upconversion luminescence agent Er3＋：YAlO3 was prepared by immobilizing Er3＋：YAlO3/TiO2, which was obtained by combination of Er3＋：YAlO3 and TiO2 using sol-gel method, on the surface of SAC. The crystal phase composition, surface structure and element distribution, and light absorption of the new photocatalysts were examined by X-ray diffraction （XRD）, energy dispersive X-ray spectra （EDS） analysis, scanning electron microscopy （SEM） and fluorescence spectra analysis （FSA）. The photocatalytic oxidation activity of the photocatalysts was also evaluated by the photodegradation of methyl orange （MO） in aqueous solution under visible light irradiation from a LED lamp （λ400 nm）. The results showed that Er3＋：YAlO3 could perform as the upconversion luminescence agent which converts the visible light up to ultraviolet light. The Er3＋：YAlO3/TiO2 calcinated at 700 °C revealed the highest photocatalytic activity. The apparent reaction rate constant could reach 0.0197 min-1 under visible light irradiation.展开更多
TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to es...TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.展开更多
Molten carbonate is an excellent electrolyte for the electrochemical reduction of CO_(2)to carbonaceous materials.However,the electrolyte–electrode-reaction relationship has not been well understood.Herein,we propose...Molten carbonate is an excellent electrolyte for the electrochemical reduction of CO_(2)to carbonaceous materials.However,the electrolyte–electrode-reaction relationship has not been well understood.Herein,we propose a general descriptor,the CO_(2)activity,to reveal the electrolyte–electrode-reaction relationship by thermodynamic calculations and experimental studies.Experimental studies agree well with theoretical predictions that both cations(Li^(+),Ca^(2+),Sr^(2+)and Ba^(2+))and anions(BO_(2)^(-),Ti_(5)O_(14)^(8-),SiO_(3)^(2-))can modulate the CO_(2)activity to control both cathode and anode reactions in a typical molten carbonate electrolyzer in terms of tuning reaction products and overpotentials.In this regard,the reduction of CO_(3)^(2-)can be interpreted as the direct reduction of CO_(2)generated from the dissociated CO_(3)^(2-),and the CO_(2)activity can be used as a general descriptor to predict the electrode reaction in molten carbonate.Overall,the CO_(2)activity descriptor unlocks the electrolyte–electrode-reaction relationship,thereby providing fundamental insights into guiding molten carbonate CO_(2)electrolysis.展开更多
Manganese-based cathode materials are considered as a promising candidate for rechargeable aqueous zinc-ion batteries(ZIBs).Suffering from poor conductive and limited structure tolerance,various carbon matrix,especial...Manganese-based cathode materials are considered as a promising candidate for rechargeable aqueous zinc-ion batteries(ZIBs).Suffering from poor conductive and limited structure tolerance,various carbon matrix,especially N-doped carbon,were employed to incorporate with MnO_(2)for greatly promoted electrochemical performances.However,the related underlying mechanism is still unknown,which is unfavorable to guide the design of high performance electrode.Herein,by incorporating layered MnO_(2)with N-doped carbon nanowires,a free-standing cathode with hierarchical core-shell structure(denoted as MnO_(2)@NC)is prepared.Benefiting from the N-doped carbon and rational architecture,the MnO_(2)@NC electrode shows an enhanced specific capacity(325 mAh g^(−1)at 0.1 A g^(−1))and rate performance(90 mAh g^(−1)at 2 A g^(−1)),as well as improved cycling stability.Furthermore,the performance improvement mechanism of MnO_(2)incorporated by N-doped carbon is investigated by X-ray photoelectron spectroscopy(XPS),Raman spectrums and density functional theory(DFT)calculation.The N atom elongates the Mn-O bond and reduces the valence of Mn^(4+)ion in MnO_(2)crystal by delocalizing its electron clouds.Thus,the electrostatic repulsion will be weakened when Zn^(2+)/H^(+)insert into the host MnO_(2)lattices,which is profitable to more cation insertion and faster ion transfer kinetics for higher capacity and rate capability.This work elucidates a fundamental understanding of the functions of N-doped carbon in composite materials and shed light on a practical pathway to optimize other electrode materials.展开更多
Despite the dazzling theoretical capacity,the devasting electrochemical activity of Li_(2)MnO_(3)(LMO)caused by the difficult oxidation of Mn4+impedes its practical application as the lithium-ion battery(LIB)cathode.T...Despite the dazzling theoretical capacity,the devasting electrochemical activity of Li_(2)MnO_(3)(LMO)caused by the difficult oxidation of Mn4+impedes its practical application as the lithium-ion battery(LIB)cathode.The efficacious activation of the Li_(2)MnO_(3) by importing electrochemically active Mn3+ions or morphological engineering is instrumental to its lithium storage activity and structural integrity upon cycling.Herein,we propose a conceptual strategy with metal-organic frameworks(MOFs)as self-sacrificial templates to prepare oxygen-deficient Li_(2)MnO_(3)(O_v-LMO)for exalted lithium storage performance.Attributed to optimized morphological features,LMO materials derived from Mn-BDC(H_(2)BDC=1,4-dicarboxybenzene)delivered superior cycling/rate performances compared with their counterparts derived from Mn-BTC(H_(3)BTC=1,3,5-benzenetricarboxylicacid)and Mn-PTC(H_(4)PTC=pyromellitic acid).Both experimental and theoretical studies elucidate the efficacious activation of primitive LMO materials toward advanced lithium storage by importing oxygen deficiencies.Impressively,O_v-LMO derived from Mn-BDC(O_v-BDC-LMO)delivered intriguing reversible capacities(179.2 mA h g^(-1)at 20 mA g^(-1)after 200 cycles and 100.1 mA h g^(-1)at 80 mA g^(-1)after 300 cycles),which can be attributed to the small particle size that shortens pathways for Li+/electron transport,the enhanced redox activity induced by abundant oxygen vacancies,and the optimized electronic configuration that contributes to the faster lithium diffusivity.This work provides insights into the rational design of LMO by morphological and atomic modulation to direct its activation and practical application as an advanced LIB cathode.展开更多
The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X...The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM） and Brunauer-Emmett-Teller （BET）. In the process of microwave-enhanced photocatalysis （MPC）, RhB （30 mg/L） was almost completely decoloured in 10 min, and the mineralization efficiency was 96.0% in 20 min. The reaction rate constant of RhB in MPC using TiO2-AC by pseudo first-order reaction kinetics was 4.16 times of that using Degussa P25. Additionally, according to gas chromatography/mass spectrometry （GC/MS） and liquid chromatography/mass spectrometry （LC/MS） identification, the major intermediates of RhB in MPC included two kinds of N-de-ethylation intermediates （N,N-diethyl-N＇-ethyl-rhodamine （DER））, oxalic acid, malonic acid, snccinic acid, and phthalic acid, maleic acid, 3-nitrobenzoic acid, and so on. The degradation of RhB in MPC was mainly attributed to the destruction of the conjugated structure, and then the intermediates transformed to acid molecules which were mineralized to water and carbon dioxide.展开更多
Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly ...Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ？C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.展开更多
Preparation of activated carbon from chicken waste is a promising way to produce a useful adsorbent for Hg removal. A three-stage activation process （drying at 200℃, pyrolysis in N2 atmosphere, followed by CO2 activ...Preparation of activated carbon from chicken waste is a promising way to produce a useful adsorbent for Hg removal. A three-stage activation process （drying at 200℃, pyrolysis in N2 atmosphere, followed by CO2 activation） was used for the production of activated samples. The effects of carbonization temperature （409-4500℃）, activation temperature （700-900℃）, and activation time （1-2.5 h） on the physicochemical properties （weight-loss and BET surface） of the prepared carbon wereinvestigated. Adsorptive removal of mercury from real flue gas onto activated carbon has been studied. The activated carbon from chicken waste has the same mercury capacity as commercial activated carbon （Darco LH） （Hg^v： 38.7% vs. 53.5%, Hg^0： 50.5% vs. 68.8%）, although its surface area is around 10 times smaller, 89.5 m^2/g vs. 862 m^2/g. The low cost activated carbon can be produced from chicken waste, and the procedure is suitable.展开更多
Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and cataly...Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and catalysis capacity for SO2. The surface properties of the untreated and plasma-treated VACFs were diagnosed by SEM, BET, FTIR, and XPS, and the adsorption capacities of VACFs for SO2 were also compared and discussed. The results show that after the plasma treatment, the external surface of VACFs was etched and became rougher, while the surface area and the total pore volume decreased. FTIR and XPS revealed that nitrogen atoms were introduced onto the VACFs surface and the distribution of functional groups on the VACFs surface was changed remarkably. The adsorption characteristic of SO2 indicates that the plasmatreated VACFs have better adsorption capacity than the original VACFs due to the nitrogen functional groups and new functional groups formed in modification, which is beneficial to the adsorption of SO2.展开更多
TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be ...TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be effectively suppressed by added polyethylene glycol （PEG） as a surface modifier. The average particle diameter of TiO2, specific surface area and absorbability of catalyst can be modified. Based on characteristics of the TiO2 photocatalyst with XRD, specific surface area, adsorption valves of methylene blue and the amount of TiO2 supported on the activated carbon, the photocatalytic degradation of L-acid was studied. The effect of the factors, such as pH of the solution, the initial concentration of L-acid on the photocatalytic degradation of L-acid, were studied also. It was found that when the pH of the solution is 1.95, the amount of photocatalyst is 0.5 g, the concentration of the L-acid solution is 1.34×10^3 mol/L and the illumination time is 7 h, the photocatalytic degradation efficiency of L-acid can reach 89,88%, The catalyst was reused 6 times and its degradation efficiency hardly changed.展开更多
A series of oxidants supported on coconut shell-based activated carbon(CAC) through microwave irradiation were prepared and characterized using scanning electron microscopy(SEM), N_2 adsorption/desorption analysis, an...A series of oxidants supported on coconut shell-based activated carbon(CAC) through microwave irradiation were prepared and characterized using scanning electron microscopy(SEM), N_2 adsorption/desorption analysis, and X-ray photoelectron spectroscopy(XPS). The SO_2 adsorption capacities and rates were evaluated by adsorption tests performed in a fixed bed reactor with a simulated flue gas, and the adsorption isotherm models were validated against the experimental results. The findings revealed that the SO_2 adsorption capacity decreased in the following order: MW-K_2Cr_2O_7-CAC > MWKMnO_4-CAC > MW-H_2O_2-CAC > MW-CAC. The SO_2 adsorption capacities and adsorption rates of the samples increased with an increasing oxidizability of the oxidants owing to the increment of mean pore size and oxygen-containing functional groups. In addition, a high initial SO_2 concentration and a low bed temperature could positively affect the SO2 adsorption. Finally, the Langmuir model validated that SO_2 was mainly adsorbed through chemical adsorption on the sample surfaces.展开更多
The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modificatio...The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modification can decrease the band gap of TiO2,leading to red shift toward visible light region.Interestingly,N-TiO2/ACF exhibits strongly synergistic effect owing to high surface area,good crystallinity,enhanced bandgap structure and light harvesting.The toluene removal rate of N-TiO2/ACF composites is 2.29 times higher than that of TiO2.The N-TiO2/ACF for toluene degradation followed the Langmuir-Hinshelwood kinetic model,and the rate constant is enhanced 8 times compared with TiO2.The possible photodegradation pathway and mechanisms are proposed.展开更多
An activated carbon pore-expanding technique was achieved through innovative reactivation by CO_2/microwave.The original and modified activated carbons were characterized by nitrogen adsorption–desorption,scanning el...An activated carbon pore-expanding technique was achieved through innovative reactivation by CO_2/microwave.The original and modified activated carbons were characterized by nitrogen adsorption–desorption,scanning electron microscopy,transmission electron microcopy,and Fourier transform infrared spectroscopy.The mesopore volume increased from 0.122 cm^3·g^(-1) to 0.270 cm^3·g^(-1),and a hierarchical pore structure was formed.A gradual decrease in the phenolic hydroxyl and carboxyl groups on the surface of activated carbon enhanced the surface inertia of granular activated carbon(GAC).The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC.Adsorption isotherm fittings revealed that the Langmuir model was applicable for the original and modified activated carbons.The isosteric adsorption heat of toluene on the activated carbon decreased by approximately 50%,which endowed the modified sample with excellent stability in application.The modified samples showed an enhanced desorption performance of toluene,thereby opening a way to extend the cycle life and improve the economic performance of carbon adsorbent in practical engineering applications.展开更多
The role of Nil（NO3）2 in the preparation of a magnetic activated carbon is reported in this paper. Magnetic coal-based activated carbons （MCAC） were prepared from Taixi anthracite with low ash content in the prese...The role of Nil（NO3）2 in the preparation of a magnetic activated carbon is reported in this paper. Magnetic coal-based activated carbons （MCAC） were prepared from Taixi anthracite with low ash content in the presence of Ni（NO3）2. The MCAC materials were characterized by a vibrating sample magnetometer （VSM）, X-ray diffraction （XRD）, a scanning electric microscope （SEM）, and by N2 adsorption. The cylindri- cal precursors and derived char were also subjected to thermogravimetric analysis to compare their behavior of weight losses during carbonization. The results show that MCAC has a larger surface area （1074 m21g） and a higher pore volume （0.5792 cm3/g） with enhanced mesopore ratio （by about 10~）. It also has a high saturation magnetization （1.6749 emu/g） and low coercivity （43.26 Oe）, which allows the material to be magnetically separated. The MCAC is easily magnetized because the nickel salt is con- vetted into Ni during carbonization and activation. Metallic Ni has a strong magnetism on account of electrostatic interaction. Added Ni（NO3）2 catalyzes the carbonization and activation process by accelerat- ing burn off of the carbon, which contributes to the development of mesopores and macropores in the activated carbon.展开更多
To study the mechanism by which activated carbon is modified by HNO3 and Mn(NO3)2,the pore texture and surface chemical characteristics of carbon materials in coconut husk activated carbon(AC)were examined via scannin...To study the mechanism by which activated carbon is modified by HNO3 and Mn(NO3)2,the pore texture and surface chemical characteristics of carbon materials in coconut husk activated carbon(AC)were examined via scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET),X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FTIR),and X-ray photoelectron spectroscopy(XPS).After being modified by HNO3,the millipore character of AC became deformed,and the character of the adjacent pores remained consolidated.The surface manganites of Mn/AC-1 presented as block and reticular fiber structures,Mn/AC-2's surface manganites presented as petty mammock crystals,and Mn/AC-3's surface manganites were observed as gauze nanosheets that interlace to fill in the pore canal.Nitric acid modification was shown to enlarge surface pores but decrease the specific surface area of AC.Mn loading can be used to construct a new pore structure that,in turn,increased the total specific surface area as well as the specific surface area and the volume of the millipores.Mn/AC-2's pore structure was optimized at a calcination temperature of 500℃and a loading quantity of 5%.The ash content of AC was considerably reduced after modified by HNO3.The active materials for Mn/AC-1 mainly consisted of Mn3O4,with a few Mn2O3 crystals,whereas Mn/AC-2's materials were mainly Mn3O4 and some MnO crystals.Mn/AC-3 was exclusively composed of Mn3O4.HNO3 activation and Mn loading modification did not considerably affect the functional group species present on the catalyst.Modification conditions using the same loading quantities and higher calcination temperatures decreased the number of O—H and N—H bonds while conversely increasing the number of CC and C—O bonds.On the contrary,the use of a higher loading quantity while maintaining the same calcination temperature increased the number of O—H and N—H bonds.A higher loading quantity is beneficial for increasing Mn^4+species.A higher calcination temperature is beneficial for increasing Mn^3+species.The results can optimize the conditions under which Mn/AC catalyst modification occurs,thus improving the physical and chemical properties of carbon-based sorbents.展开更多
基金supported by the National Natural Science Foundation of China(52276195)Program for Supporting Innovative Research from Jinan(202228072)Program of Agricultural Development from Shandong(SD2019NJ015)。
文摘Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.
基金Project supported by West China Top Discipline Program in Basic Medicine Sciences,Ningxia Medical University,ChinaProject(21266026)supported by the National Natural Science Foundation of China
文摘Activated carbon obtained from Astragalus residue was chemically activated by KOH and modified with KMnO4.The samples were characterized by N2 adsorption,Fourier transform infrared spectroscopy,X-ray diffractometry,scanning electron microscopy,and Boehm titration.Accordingly,the original and modified carbon materials were used for the removal of Cd2+from aqueous solution by batch adsorption experiments.Results showed that the contents of oxygen-containing functional groups increased,and MnO2 was nearly uniformly deposited on the surface of activated carbon after modification by KMnO4.The adsorption kinetics was described by pseudo-second order model.Langmuir model fitted the adsorption-isotherm experimental data of Cd2+better than the Freundlich model.The maximum adsorption capacities of the activated carbon before and after modification for Cd2+were 116.96 and 217.00 mg/g,respectively.KMnO4 considerably changed the physicochemical properties and surface texture of activated carbon and enhanced the adsorption capacity of activated carbon for Cd2+.
基金Projects (50908096, 50908097) supported by the National Natural Science Foundation of ChinaProject (20100471251) supported by China Postdoctoral Science Foundation
文摘In order to develop the high photocatalytic activity of TiO2 under visible light as that under ultraviolet light and make it easy to be separated from treated liquor, a visible light response and spherical activated carbon （SAC） supported photocatalyst doped with upconversion luminescence agent Er3＋：YAlO3 was prepared by immobilizing Er3＋：YAlO3/TiO2, which was obtained by combination of Er3＋：YAlO3 and TiO2 using sol-gel method, on the surface of SAC. The crystal phase composition, surface structure and element distribution, and light absorption of the new photocatalysts were examined by X-ray diffraction （XRD）, energy dispersive X-ray spectra （EDS） analysis, scanning electron microscopy （SEM） and fluorescence spectra analysis （FSA）. The photocatalytic oxidation activity of the photocatalysts was also evaluated by the photodegradation of methyl orange （MO） in aqueous solution under visible light irradiation from a LED lamp （λ400 nm）. The results showed that Er3＋：YAlO3 could perform as the upconversion luminescence agent which converts the visible light up to ultraviolet light. The Er3＋：YAlO3/TiO2 calcinated at 700 °C revealed the highest photocatalytic activity. The apparent reaction rate constant could reach 0.0197 min-1 under visible light irradiation.
基金Project(50802034) supported by the National Natural Science Foundation of ChinaProject(11A093) supported by the Key Project Foundation by the Education Department of Hunan Province,China
文摘TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.
基金funded by National Natural Science Foun-dation of China(No.52031008,21673162).
文摘Molten carbonate is an excellent electrolyte for the electrochemical reduction of CO_(2)to carbonaceous materials.However,the electrolyte–electrode-reaction relationship has not been well understood.Herein,we propose a general descriptor,the CO_(2)activity,to reveal the electrolyte–electrode-reaction relationship by thermodynamic calculations and experimental studies.Experimental studies agree well with theoretical predictions that both cations(Li^(+),Ca^(2+),Sr^(2+)and Ba^(2+))and anions(BO_(2)^(-),Ti_(5)O_(14)^(8-),SiO_(3)^(2-))can modulate the CO_(2)activity to control both cathode and anode reactions in a typical molten carbonate electrolyzer in terms of tuning reaction products and overpotentials.In this regard,the reduction of CO_(3)^(2-)can be interpreted as the direct reduction of CO_(2)generated from the dissociated CO_(3)^(2-),and the CO_(2)activity can be used as a general descriptor to predict the electrode reaction in molten carbonate.Overall,the CO_(2)activity descriptor unlocks the electrolyte–electrode-reaction relationship,thereby providing fundamental insights into guiding molten carbonate CO_(2)electrolysis.
基金supported by National Natural Science Foundation of China(Nos.U20A20246,51872108)the Fundamental Research Funds for the Central Universities(Nos.30106200463 and CCNU20TS006)Graduate Education Innovation Grant from Central China Normal University(No.2020CXZZ101).
文摘Manganese-based cathode materials are considered as a promising candidate for rechargeable aqueous zinc-ion batteries(ZIBs).Suffering from poor conductive and limited structure tolerance,various carbon matrix,especially N-doped carbon,were employed to incorporate with MnO_(2)for greatly promoted electrochemical performances.However,the related underlying mechanism is still unknown,which is unfavorable to guide the design of high performance electrode.Herein,by incorporating layered MnO_(2)with N-doped carbon nanowires,a free-standing cathode with hierarchical core-shell structure(denoted as MnO_(2)@NC)is prepared.Benefiting from the N-doped carbon and rational architecture,the MnO_(2)@NC electrode shows an enhanced specific capacity(325 mAh g^(−1)at 0.1 A g^(−1))and rate performance(90 mAh g^(−1)at 2 A g^(−1)),as well as improved cycling stability.Furthermore,the performance improvement mechanism of MnO_(2)incorporated by N-doped carbon is investigated by X-ray photoelectron spectroscopy(XPS),Raman spectrums and density functional theory(DFT)calculation.The N atom elongates the Mn-O bond and reduces the valence of Mn^(4+)ion in MnO_(2)crystal by delocalizing its electron clouds.Thus,the electrostatic repulsion will be weakened when Zn^(2+)/H^(+)insert into the host MnO_(2)lattices,which is profitable to more cation insertion and faster ion transfer kinetics for higher capacity and rate capability.This work elucidates a fundamental understanding of the functions of N-doped carbon in composite materials and shed light on a practical pathway to optimize other electrode materials.
基金the financial support from the Special Funds for the Cultivation of Guangdong College Students’Scientific and Technological Innovation(“Climbing Program”Special Funds,pdjh2023b0145)the Research and Development Plan Project in Key Fields of Guangdong Province(2020B0101030005)+1 种基金the Applied special project of Guangdong Provincial Science and Technology Plan(2017B090917002)the Basic and Applied Basic Research Fund of Guangdong Province(2019B1515120027)。
文摘Despite the dazzling theoretical capacity,the devasting electrochemical activity of Li_(2)MnO_(3)(LMO)caused by the difficult oxidation of Mn4+impedes its practical application as the lithium-ion battery(LIB)cathode.The efficacious activation of the Li_(2)MnO_(3) by importing electrochemically active Mn3+ions or morphological engineering is instrumental to its lithium storage activity and structural integrity upon cycling.Herein,we propose a conceptual strategy with metal-organic frameworks(MOFs)as self-sacrificial templates to prepare oxygen-deficient Li_(2)MnO_(3)(O_v-LMO)for exalted lithium storage performance.Attributed to optimized morphological features,LMO materials derived from Mn-BDC(H_(2)BDC=1,4-dicarboxybenzene)delivered superior cycling/rate performances compared with their counterparts derived from Mn-BTC(H_(3)BTC=1,3,5-benzenetricarboxylicacid)and Mn-PTC(H_(4)PTC=pyromellitic acid).Both experimental and theoretical studies elucidate the efficacious activation of primitive LMO materials toward advanced lithium storage by importing oxygen deficiencies.Impressively,O_v-LMO derived from Mn-BDC(O_v-BDC-LMO)delivered intriguing reversible capacities(179.2 mA h g^(-1)at 20 mA g^(-1)after 200 cycles and 100.1 mA h g^(-1)at 80 mA g^(-1)after 300 cycles),which can be attributed to the small particle size that shortens pathways for Li+/electron transport,the enhanced redox activity induced by abundant oxygen vacancies,and the optimized electronic configuration that contributes to the faster lithium diffusivity.This work provides insights into the rational design of LMO by morphological and atomic modulation to direct its activation and practical application as an advanced LIB cathode.
基金supported by the National Natural Science Foundation of China (No. 20707009)the Jiangsu Province Social Development Foundation (No.BS2007051)+1 种基金the Opening Foundation (WTWER0713) of Engineering Research Center for Water Treatment and Water Remediation of the Ministry of Education of Chinathe State Key Laboratory of Pollution Control and Resource Reuse Opening Foundation (No. PCRRCF07003).
文摘The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM） and Brunauer-Emmett-Teller （BET）. In the process of microwave-enhanced photocatalysis （MPC）, RhB （30 mg/L） was almost completely decoloured in 10 min, and the mineralization efficiency was 96.0% in 20 min. The reaction rate constant of RhB in MPC using TiO2-AC by pseudo first-order reaction kinetics was 4.16 times of that using Degussa P25. Additionally, according to gas chromatography/mass spectrometry （GC/MS） and liquid chromatography/mass spectrometry （LC/MS） identification, the major intermediates of RhB in MPC included two kinds of N-de-ethylation intermediates （N,N-diethyl-N＇-ethyl-rhodamine （DER））, oxalic acid, malonic acid, snccinic acid, and phthalic acid, maleic acid, 3-nitrobenzoic acid, and so on. The degradation of RhB in MPC was mainly attributed to the destruction of the conjugated structure, and then the intermediates transformed to acid molecules which were mineralized to water and carbon dioxide.
基金supported by the National Natural Science Foundation of China(Grant 20773090)the Specialized Research Fund for the Doctoral Program of Higher Education(Grant 200806100009)
文摘Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ？C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.
文摘Preparation of activated carbon from chicken waste is a promising way to produce a useful adsorbent for Hg removal. A three-stage activation process （drying at 200℃, pyrolysis in N2 atmosphere, followed by CO2 activation） was used for the production of activated samples. The effects of carbonization temperature （409-4500℃）, activation temperature （700-900℃）, and activation time （1-2.5 h） on the physicochemical properties （weight-loss and BET surface） of the prepared carbon wereinvestigated. Adsorptive removal of mercury from real flue gas onto activated carbon has been studied. The activated carbon from chicken waste has the same mercury capacity as commercial activated carbon （Darco LH） （Hg^v： 38.7% vs. 53.5%, Hg^0： 50.5% vs. 68.8%）, although its surface area is around 10 times smaller, 89.5 m^2/g vs. 862 m^2/g. The low cost activated carbon can be produced from chicken waste, and the procedure is suitable.
基金supported by National Natural Science Foundation of China(No.50876077)
文摘Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and catalysis capacity for SO2. The surface properties of the untreated and plasma-treated VACFs were diagnosed by SEM, BET, FTIR, and XPS, and the adsorption capacities of VACFs for SO2 were also compared and discussed. The results show that after the plasma treatment, the external surface of VACFs was etched and became rougher, while the surface area and the total pore volume decreased. FTIR and XPS revealed that nitrogen atoms were introduced onto the VACFs surface and the distribution of functional groups on the VACFs surface was changed remarkably. The adsorption characteristic of SO2 indicates that the plasmatreated VACFs have better adsorption capacity than the original VACFs due to the nitrogen functional groups and new functional groups formed in modification, which is beneficial to the adsorption of SO2.
基金The State Education Ministry "211" Project, the Natural Science Foundation of the Education Commission of Jiangsu Province(2005103TSJB156) and the Funding of the Environment Friendship Laboratory of Nanjing Normal University
文摘TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be effectively suppressed by added polyethylene glycol （PEG） as a surface modifier. The average particle diameter of TiO2, specific surface area and absorbability of catalyst can be modified. Based on characteristics of the TiO2 photocatalyst with XRD, specific surface area, adsorption valves of methylene blue and the amount of TiO2 supported on the activated carbon, the photocatalytic degradation of L-acid was studied. The effect of the factors, such as pH of the solution, the initial concentration of L-acid on the photocatalytic degradation of L-acid, were studied also. It was found that when the pH of the solution is 1.95, the amount of photocatalyst is 0.5 g, the concentration of the L-acid solution is 1.34×10^3 mol/L and the illumination time is 7 h, the photocatalytic degradation efficiency of L-acid can reach 89,88%, The catalyst was reused 6 times and its degradation efficiency hardly changed.
文摘A series of oxidants supported on coconut shell-based activated carbon(CAC) through microwave irradiation were prepared and characterized using scanning electron microscopy(SEM), N_2 adsorption/desorption analysis, and X-ray photoelectron spectroscopy(XPS). The SO_2 adsorption capacities and rates were evaluated by adsorption tests performed in a fixed bed reactor with a simulated flue gas, and the adsorption isotherm models were validated against the experimental results. The findings revealed that the SO_2 adsorption capacity decreased in the following order: MW-K_2Cr_2O_7-CAC > MWKMnO_4-CAC > MW-H_2O_2-CAC > MW-CAC. The SO_2 adsorption capacities and adsorption rates of the samples increased with an increasing oxidizability of the oxidants owing to the increment of mean pore size and oxygen-containing functional groups. In addition, a high initial SO_2 concentration and a low bed temperature could positively affect the SO2 adsorption. Finally, the Langmuir model validated that SO_2 was mainly adsorbed through chemical adsorption on the sample surfaces.
基金This study was supported by the CNPC Research Institute of Safety and Environmental Protection Technology(No.PPCIP2017005).
文摘The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modification can decrease the band gap of TiO2,leading to red shift toward visible light region.Interestingly,N-TiO2/ACF exhibits strongly synergistic effect owing to high surface area,good crystallinity,enhanced bandgap structure and light harvesting.The toluene removal rate of N-TiO2/ACF composites is 2.29 times higher than that of TiO2.The N-TiO2/ACF for toluene degradation followed the Langmuir-Hinshelwood kinetic model,and the rate constant is enhanced 8 times compared with TiO2.The possible photodegradation pathway and mechanisms are proposed.
基金Supported by the National Natural Science Foundation of China(21506194,21676255)the Natural Science Foundation of Zhejiang Province(Y16B070025)the Commission of Science and Technology of Zhejiang Province(2013C03021,2017C33106)
文摘An activated carbon pore-expanding technique was achieved through innovative reactivation by CO_2/microwave.The original and modified activated carbons were characterized by nitrogen adsorption–desorption,scanning electron microscopy,transmission electron microcopy,and Fourier transform infrared spectroscopy.The mesopore volume increased from 0.122 cm^3·g^(-1) to 0.270 cm^3·g^(-1),and a hierarchical pore structure was formed.A gradual decrease in the phenolic hydroxyl and carboxyl groups on the surface of activated carbon enhanced the surface inertia of granular activated carbon(GAC).The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC.Adsorption isotherm fittings revealed that the Langmuir model was applicable for the original and modified activated carbons.The isosteric adsorption heat of toluene on the activated carbon decreased by approximately 50%,which endowed the modified sample with excellent stability in application.The modified samples showed an enhanced desorption performance of toluene,thereby opening a way to extend the cycle life and improve the economic performance of carbon adsorbent in practical engineering applications.
基金support by the National Natural Science Foundation of China (No. 20776150)the National Hi-Tech Research and Development Program of China(No. 2008AA05Z308)the Special Fund for Basic Scientific Research of Central Colleges (No. 2009QH15)
文摘The role of Nil（NO3）2 in the preparation of a magnetic activated carbon is reported in this paper. Magnetic coal-based activated carbons （MCAC） were prepared from Taixi anthracite with low ash content in the presence of Ni（NO3）2. The MCAC materials were characterized by a vibrating sample magnetometer （VSM）, X-ray diffraction （XRD）, a scanning electric microscope （SEM）, and by N2 adsorption. The cylindri- cal precursors and derived char were also subjected to thermogravimetric analysis to compare their behavior of weight losses during carbonization. The results show that MCAC has a larger surface area （1074 m21g） and a higher pore volume （0.5792 cm3/g） with enhanced mesopore ratio （by about 10~）. It also has a high saturation magnetization （1.6749 emu/g） and low coercivity （43.26 Oe）, which allows the material to be magnetically separated. The MCAC is easily magnetized because the nickel salt is con- vetted into Ni during carbonization and activation. Metallic Ni has a strong magnetism on account of electrostatic interaction. Added Ni（NO3）2 catalyzes the carbonization and activation process by accelerat- ing burn off of the carbon, which contributes to the development of mesopores and macropores in the activated carbon.
基金The Science and Technology Plan of Yunnan Science and Technology Department(No.2019FB077,202001AT070029)the Open Fund of Key Laboratory of Ministry of Education for Metallurgical Emission Reduction and Comprehensive Utilization of Resources(No.JKF19-08)the Industrialization Cultivation Project of Scientific Research Fund of Yunnan Provincial Department of Education(No.2016CYH07).
文摘To study the mechanism by which activated carbon is modified by HNO3 and Mn(NO3)2,the pore texture and surface chemical characteristics of carbon materials in coconut husk activated carbon(AC)were examined via scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET),X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FTIR),and X-ray photoelectron spectroscopy(XPS).After being modified by HNO3,the millipore character of AC became deformed,and the character of the adjacent pores remained consolidated.The surface manganites of Mn/AC-1 presented as block and reticular fiber structures,Mn/AC-2's surface manganites presented as petty mammock crystals,and Mn/AC-3's surface manganites were observed as gauze nanosheets that interlace to fill in the pore canal.Nitric acid modification was shown to enlarge surface pores but decrease the specific surface area of AC.Mn loading can be used to construct a new pore structure that,in turn,increased the total specific surface area as well as the specific surface area and the volume of the millipores.Mn/AC-2's pore structure was optimized at a calcination temperature of 500℃and a loading quantity of 5%.The ash content of AC was considerably reduced after modified by HNO3.The active materials for Mn/AC-1 mainly consisted of Mn3O4,with a few Mn2O3 crystals,whereas Mn/AC-2's materials were mainly Mn3O4 and some MnO crystals.Mn/AC-3 was exclusively composed of Mn3O4.HNO3 activation and Mn loading modification did not considerably affect the functional group species present on the catalyst.Modification conditions using the same loading quantities and higher calcination temperatures decreased the number of O—H and N—H bonds while conversely increasing the number of CC and C—O bonds.On the contrary,the use of a higher loading quantity while maintaining the same calcination temperature increased the number of O—H and N—H bonds.A higher loading quantity is beneficial for increasing Mn^4+species.A higher calcination temperature is beneficial for increasing Mn^3+species.The results can optimize the conditions under which Mn/AC catalyst modification occurs,thus improving the physical and chemical properties of carbon-based sorbents.
