Imaging the Architecture of Mineral Systems and the Pathways of Ore-forming Fluids across Mongolia with Magnetotellurics

In the framework of a mineral system approach,a combination of components is required to develop a mineral system.This includes the whole-lithosphere architecture,which controls the transport of ore-forming fluids,and favorable tectonic and geodynamic processes,occurring at various spatial and temporal scales,that influence the genesis and evolution of ore-forming fluids(Huston et al.,2016;Groves et al.,2018;Davies et al.,2020).Knowledge of the deep structural framework can advance the understanding of the development of a mineral system and the emplacement of mineral deposits.Deep geophysical exploration carried out with this aim is increasingly important for targeting new ore deposits in unexplored and underexplored regions(Dentith et al.,2018;Dentith,2019).

Helium,Argon,and Xenon Isotopic Compositions of Ore-forming Fluids in Jinding-Baiyangping Polymetallic Deposits,Yunnan,Southwest China

The Jinding superlarge lead and zinc deposit has attracted the attention of geologists of the world and its metallogenesis has long been in dispute. This paper takes the Jinding deposit and the Baiyangping Cu-Ag-Co deposit which was recently found at about 30 km north of Jinding as one ore belt, and, based on researches on the helium, argon, and xenon isotopic compositions of primary inclusions in ore-forming solutions of the main stage, the authors have found that the 3He/4He ratio of the ore-forming fluid is 2.7×10?6 (varying from 0.19 to 1.97 Ra), the 4He/40Ar ratio (0.24–3.12) is close to the mantle characteristic ratio, and the xenon isotopic composition and evolution show characters of the mantle xenon. The above results reveal the characteristics of mantle source and crust-mantle fluid mixing (mantle helium reaching 32%) and the metallogenic contributions of the deep processes in the Jinding-Baiyangping ore belt.

Origin of Ore-Forming Fluids of Mississippi Valley-Type (MVT) Pb-Zn Deposits in Kangdian Area, China

Analyses of fluid\|inclusion leachates from ore deposits show that Na/Br ratios are within the range of 75-358 and Cl/Br 67-394, respectively, and this variation trend coincides with the seawater evaporation trajectory on the basis of the Na/Br and Cl/Br ratios. The average Cl/Br and Na/Br ratios of mineralizing fluids are 185 and 173 respectively, which are very close to the ratios (120 and 233) of the residual evaporated seawater past the point of halite precipitation. It is suggested that the original mineralizing brine was derived from highly evaporated seawater with a high salinity. However, the inclusion fluids have absolute Na values of \{69.9\}-\{2606.2\} mmol kg\+\{-1\} and Cl values of \{106.7\}-\{1995.5\} mmol kg\+\{-1\}. Most of the values are much less than those of seawater: Na, 485 mmol kg\+\{-1\} and Cl, 566 mmol kg\+\{-1\}, respectively; the salinity measured from fluid inclusions of the deposits ranges from \{2.47 wt%\} to \{15.78 wt%\} NaCl equiv. The mineralizing brine has been diluted. The \{δ\{\}\+\{18\}O\} and δD values of ore\|forming fluids vary from \{-8.21‰\} to \{9.51‰\} and from \{-40.3‰\} to \{-94.3‰\}, respectively. The δD values of meteoric water in this region varied from \{-80‰\} to \{-100‰\} during the Jurassic. This evidenced that the ore\|forming fluids are the mixture of seawater and meteoric water. Highly evaporated seawater was responsible for leaching and extracting Pb, Zn and Fe, and mixed with and diluted by descending meteoric water, which resulted in the formation of ores.

A Study on the Ore-forming Effect of Mantle-derived Fluid

Based on summarizing of the effect of mantle-derived fluid on the formation of ores, especially on gold ore, and with the latest investigations, such as the formation of ore from the action of shallow-deep fluid, the transportation effect of the thermal energy by mantle-derived fluid, this paper mainly aims at the effect of mantle-derived fluid on the generation of hydrocarbons. With the proof from geochemistry and fluid inclusion, it was suggested that the mantle-derived fluid not only supplied source materials for hydrocarbons, but also supplied essential energy and matter necessary for the generation of hydrocarbons. The mantle-derived fluid had a good effect, but at the same time it had an adverse effect under specific conditions, on the formation of reservoirs. This paper also discusses the future direction and significance of studying mantle-derived fluid.

In, Sn, Pb and Zn Contents and Their Relationships in Ore-forming Fluids from Some In-rich and In-poor Deposits in China

All the indium-rich deposits with indium contents in ores more than 100×10^-6 seems to be of cassiterite-sulfide deposits or Sn-bearing Pb-Zn deposits, e.g., in the Dachang Sn deposit in Guangxi, the Dulong Sn-Zn deposit in Yunnan, and the Meng＇entaolegai Ag-Pb-Zn deposit in Inner Mongolia, the indium contents in ores range from 98×10^-6 to 236×10^-6 and show a good positive correlation with contents of zinc and tin, and their correlation coefficients are 0.8781 and 0.7430, respectively. The indium contents from such Sn-poor deposits as the Fozichong Pb-Zn deposit in Guangxi and the Huanren Pb-Zn deposit in Liaoning are generally lower than 10×10^-6, i.e., whether tin is present or not in a deposit implies the enrichment extent of indium in ores. Whether the In enrichment itself in the ore -forming fluids or the ore-forming conditions has actually caused the enrichment/depletion of indium in the deposits？ After studying the fluid inclusions in quartz crystallized at the main stage of mineralization of several In-rich and In-poor deposits in China, this paper analyzed the contents and studied the variation trend of In, Sn, Pb and Zn in the ore-forming fluids. The results show that the contents of lead and zinc in the ore-forming fluids of In-rich and -poor deposits are at the same level, and the lead contents range from 22×10^-6 to 81×10^-6 and zinc from 164×10^-6 to 309×10^-6, while the contents of indium and tin in the ore-forming fluids of In-rich deposits are far higher than those of Inpoor deposits, with a difference of 1-2 orders of magnitude. Indium and tin contents in ore-forming fluid of In-rich deposits are 1.9×10^-6-4.1×10^-6 and 7×10^-6-55×10^-6, and there is a very good positive correlation between the two elements, with a correlation coefficient of 0.9552. Indium and tin contents in ore-forming fluid of In-poor deposits are 0.03×10^-6-0.09×10^-6 and 0.4×10^-6-2.0×10^-6, respectively, and there is no apparent correlation between them. This indicates, on one hand, that In-rich oreforming fluids are the material basis for the formation of In-rich deposits, and, on the other hand, tin probably played a very important role in the transport and enrichment of indium.

Geochemical Characteristics and Sources of Ore-forming Fluids of the Mayuan Pb-Zn Deposit,Nanzheng,Shaanxi,China

The Mayuan stratabound Pb-Zn deposit in Nanzheng,Shaanxi Province,is located in the northern margin of the Yangtze Plate,in the southern margin of the Beiba Arch.The orebodies are stratiform and hosted in breciated dolostone of the Sinian Dengying Formation.The ore minerals are primarily sphalerite and galena,and the gangue minerals comprise of dolomite,quartz,barite,calcite and solid bitumen.Fluid inclusions from ore-stage quartz and calcite have homogenization tempreatures from 98 to 337℃ and salinities from 7.7 wt%to 22.2 wt%（NaCl equiv.）.The vapor phase of the inclusions is mainly composed of CH_4 with minor CO_2 and H_2S.The δD_（fluid） values of fluid inclusions in quartz and calcite display a range from-68‰ to-113‰（SMOW）,and the δ^（18）O_（fluid）values calculated from δ^（18）O_（quartz） and δ^（18）O_（calcite） values range from 4.5‰ to 16.7‰（SMOW）.These data suggest that the ore-forming fluids may have been derived from evaporitic sea water that had reacted with organic matter.The δ^（13）C_（CH4） values of CH_4 in fluid inclusions range from-37.2‰ to-21.0‰（PDB）,suggesting that the CH_4 in the ore-forming fluids was mainly derived from organic matter.This,together with the abundance of solid bitumen in the ores,suggest that organic matter played an important role in mineralization,and that the thermochemical sulfate reduction（TSR） was the main mechanism of sulfide precipitation.The Mayuan Pb-Zn deposit is a carbonate-hosted epigenetic deposit that may be classified as a Mississippi Valley type（MVT） deposit.

Sulfur isotopic composition of the Tianqiao Pb-Zn ore deposit,Northwest Guizhou Province,China:Implications for the source of sulfur in the ore-forming fluids

The Tianqiao Pb-Zn ore deposit of Guizhou Province, China, is located in the mid-east of the Sichuan-Yunnan-Guizhou Pb-Zn-Ag multi-metallic mineralization area, which is representative of the Pb-Zn ore de-posits in this area. It consists of three main orebodies, whose Pb+Zn reserves are more than 0.2 million ton. This paper analyzes the sulfur isotopic composition of these orebodies. The data show that the ore minerals (galena, sphalerite, pyrite) in these orebodies are enriched in heavy sulfur, with δ34SV-CDT values varying between 8.35‰ and 14.44‰, i.e. the δ34SV-CDT values of pyrite are between 12.81‰ and 14.44‰, the mean value is 13.40‰; the δ34SV-CDT values of sphalerite are range from 10.87‰ to 14.00‰, the mean value is 12.53‰; the δ34SV-CDT values of galena are range from 8.35‰ to 9.83‰, the mean value is 8.84‰, and they have the feature of δ34Spyrite>δ34Ssphalerite>δ34Sgalena, which indicates the sulfur isotope in ore-forming fluids has attained equilibrium. The δ34S V-CDT values of the deposit are close to those of sulfates from carbonate strata of different ages in the ore-field (15‰), which suggests that the sulfur in the ore-forming fluids should be derived from the thermo-chemical sulfate reduction of sulfates from the sedimentary strata.

Study on the multi-sources of ore-forming materials and ore-forming fluids in the Huize lead-zinc ore deposit

The Huize large-sized Pb-Zn deposit in Yunnan Province, China, is characterized by favorable metallogenic background and particular geological settings. This suggested that the ore-forming mechanism is relatively unique. On the basis of geological features such as the contents of mineralization elements, the REE concentrations of gangue calcites, the REE concentrations of calcite veins in the NE-trending tectonic zone and the Pb, Sr, C, H and O isotopic compositions of different minerals, this paper presents that the ore-forming materials and ore-forming fluids of the deposit were derived from various types of strata or rocks. This is a very significant conclusion for us to further discuss the mineralization mechanism of the deposit at depth and establish an available genetic model.

Fluid Evolution and Ore-forming Processes of the Jiama Cu Deposit, Tibet： Evidence from Fluid Inclusions

The Jiama deposit is a large copper deposit in Tibet. Mineralization occurs in three different host rocks： skarn, hornfels and porphyry. A detailed fluid inclusion study was conducted for veins in the different host rocks to investigate the relationship between fluid evolution and ore-forming processes. Based on examination of cores from 36 drill holes, three types of veins （A, B and D） were identified in the porphyries, four types （I, II, III and IV） in the skarn, and three （a, b and c） in the hornfels. The crosscutting relationships of the veins and that of the host rocks suggest two hydrothermal stages, one early and one late stage. Fluid inclusions indicate that the Jiama hydrothermal fluid system underwent at least two episodes of fluid boiling. The first boiling event occurred during the early hydrothermal stage, as recorded by fluid inclusions hosted in type A veins in the porphyries, type a veins in the hornfels, and wollastonite in the skarns. This fluid boiling event was associated with relatively weak mineralization. The second boiling event occurred in the late hydrothermal stage, as determined from fluid inclusions hosted in type B and D veins in the porphyries, type I to IV veins in the skarns, and type b and c veins in the hornfels. This late boiling event, together with mixing with meteoric water, was responsible for more than 90% of the metal accumulation in the deposit. The first boiling only occurred in the central part of the deposit and the second boiling event took place across an entire interlayered structural zone between hornfels and marble. A spatial zoning of ore-elements is evident, and appears to be related to different migration pathways and precipitation temperatures of Cu, Mo, Pb, Zn, Au and Ag.

Ore-forming Fluid Characteristics of the Saishitang Cu-polymetallic Deposit in Qinghai Province,China

Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization episodes were identified： melt/fluid coexisting period （O）, skarn period （A）, first sulfide period （B） and second sulfide period （C）, and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages, namely crystal bearing inclusions （type I）, aqueous inclusions （type Ⅱ） and pure liquid inclusions （type Ⅲ）. Type I and Ⅱ inclusions were observed in stage O1, having homogenization temperature from 252 to 431℃, and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1, having homogenization temperature from 506 to 548℃, and salinities ranging from 39.4% to 44.6%. In stage B1, type Ⅱ and Ⅲ inclusions were observed, with homogenization temperature concentrating between 300-400℃, and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2, with homogenization temperature varying from 403 to 550℃. In stage C1, type I and II inclusion commonly coexisted, and constituted a boiling inclusion group, having homogenization temperatures at 187-463℃, and salinities in a range of 29.4%-46.8% and 2.2%-11.0%. Type II and III inclusions were developed in stage C2, having homogenization temperature at 124-350℃, and salinities ranging between 1.6% and 15.4%. In stage C3, type Ⅱ and Ⅲ inclusions were presented, with a homogenization temperature range of 164-360℃, and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1, and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1, the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284- 289℃, a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H2_O, CH_4 and CO_2 were found as gas composition. H-O isotope study indicates the ore- forming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease, and redox state is weakly reducing. Along with fluid evolution, oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids, bringing about dissociation of chlorine-complex, resulting in a great deal of copper precipitation. In conclusion, Saishitang deposit, controlled by regional tectonics, is formed by metasomatism between highly fractionated mineralization rock body and wall rock, and belongs to banded skarn Cu-polymetallic deposit.Abstract： Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization episodes were identified： melt/fluid coexisting period （O）, skarn period （A）, first sulfide period （B） and second sulfide period （C）, and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages, namely crystal bearing inclusions （type I）, aqueous inclusions （type Ⅱ） and pure liquid inclusions （type Ⅲ）. Type I and II inclusions were observed in stage O1, having homogenization temperature from 252 to 431℃, and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1, having homogenization temperature from 506 to 548℃, and salinities ranging from 39.4% to 44.6%. In stage B1, type II and III inclusions were observed, with homogenization temperature concentrating between 300-400℃, and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2, with homogenization temperature varying from 403 to 550℃. In stage C1, type I and II inclusion commonly coexisted, and constituted a boiling inclusion group, having homogenization temperatures at 187-463℃, and salinities in a range of 29.4%-46.8% and 2.2%-11.0%. Type II and III inclusions were developed in stage C2, having homogenization temperature at 124-350℃, and salinities ranging between 1.6% and 15.4%. In stage C3, type II and Ⅲ inclusions were presented, with a homogenization temperature range of 164-360℃, and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1, and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1, the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284- 289℃, a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H_2O, CH_4 and CO_2 were found as gas composition. H-O isotope study indicates the ore- forming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease, and redox state is weakly reducing. Along with fluid evolution, oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids, bringing about dissociation of chlorine-complex, resulting in a great deal of copper precipitation. In conclusion, Saishitang deposit, controlled by regional tectonics, is formed by metasomatism between highly fractionated mineralization rock body and wall rock, and belongs to banded skarn Cu-polymetallic deposit.

Sulfur isotopic composition of the Bainiuchang super-large Ag polymetallic deposit,Yunnan Province,China: Implications for the source of sulfur in ore-forming fluids

The Bainiuchang deposit in Yunnan Province, China, is located geographically between the Gejiu ore field and the Dulong ore field. In addition to >7000 t Ag reserves, the deposit possesses large-scale Pb, Zn, Sn reserves and a mass of dispersed elements (i.e., In, Cd, Ge, Ga, etc.). Based on systematic studies of sulfur isotopic composition, the authors conclude: The Bainiuchang deposit experienced two epochs of metallogenesis, i.e., the Middle-Cambrian sea-floor exhalative sedimentary metallogenic epoch and the Yanshanian magmatic hydrothermal superimposition metallogenic epoch. In the two metallogenic epochs, the δ34S values of sulfides were all near 0, showing a tendency of being enriched slightly in heavy sulfur. The δ34S values of sulfides in the early metallogenic epoch are within the range of 2‰–5‰ with a peak value range of 2‰–3‰ and an average of 3.0‰, and those of sulfides in the late metallogenic epoch are within the range of 2‰–6‰ with a peak value of 3‰–4‰ and an average of 3.9‰. For the single metallogenic epoch, sulfur in the ore-forming fluids in the early epoch already reached isotopic equilibrium and was derived mainly from underneath the magma chamber or basement metamorphic igneous rocks. Sulfur in the sulfides in the late epoch was derived mainly from magmatic hydrothermal fluids formed in the process of remelting of the basement metamorphic igneous rocks.

Numerical Modelling of Ore-forming Dynamics of Fractal Dispersive Fluid Systems

Based on an analysis of the fractal structures and mass transport mechanism of typical shear-fluid-ore formation system, the fractal dispersion theory of the fluid system was used in the dynamic study of the ore formation system. The model of point-source diffusive illuviation of the shear-fluid-ore formation system was constructed, and the numerical simulation of dynamics of the ore formation system was finished. The result shows that: (1) The metallogenic system have nested fractal structure. Different fractal dimension values in different systems show unbalance and inhomogeneity of ore-forming processes in the geohistory. It is an important parameter to symbolize the process of remobilization and accumulation of ore-forming materials. Also it can indicate the dynamics of the metallogenic system quantitatively to some extent. (2) In essence, the fractal dispersive ore-forming dynamics is a combination of multi-processes dominated by fluid dynamics and supplemented by molecule dispersion in fluids and fluid-rock interaction. It changes components and physico-chemical properties of primary rocks and fluids, favouring deposition and mineralization of ore-forming materials. (3) Gold ore-forming processes in different types of shear zones are quite different. (1) In a metallogenic system with inhomogeneous volumetric change and inhomogeneous shear, mineralization occurs in structural barriers in the centre of a shear zone and in geochemical barriers in the shear zone near its boundaries. But there is little possibility of mineralization out of the shear zone. (2) As to a metallogenic system with inhomogeneous volumetric change and simple shear, mineralization may occur only in structural barriers near the centre of the shear zone. (3) In a metallogenic system with homogeneous volumetric change and inhomogeneous shear, mineralization may occur in geochemical barriers both within and out of the shear zone.

REE Geochemistry of Fluorite from the Maoniuping REE Deposit,Sichuan Province,China:Implications for the Source of Ore-forming Fluids

Fluorite is one of the main gangue minerals in the Maoniuping REE deposit, Sichuan Province, China. Fluorite with different colors occurs not only within various orebodies, but also in wallrocks of the orefield. Based on REE geochemistry, fluorite in the orefleld can be classified as the LREE-rich, LREE-flat and LREE-depleted types. The three types of fluorite formed at different stages from the same hydrothermal fluid source, with the LREE-rich fluorite forming at the relatively early stage, the LREE-flat fluorite in the middle, and the LREE-depleted fluorite at the latest stage. Various lines of evidence demonstrate that the variation of the REE contents of fluorite shows no relation to the color. The mineralization of the Maouiuping REE deposit is associated spatially and temporally with carbonatite-syenite magmatism and the ore-forming fluids are mainly derived from carbonatite and syenite melts.

Ore-forming Fluid Systems and Mineralization in the Eastern Jiangnan Uplift in the Border Area of Anhui and Jiangxi Provinces, China

Obvious differences in mineralization characteristics exist between the southern and northern parts of the eastern part of the Jiangnan Uplift in northern Jiangxi Province and southern Anhui Province. The regional metallogeny is discussed, and the ore-forming fluid systems are classified in this article. It is proposed that the fluid ore-forming activities in the Jiangnan Uplift both in northern Jiangxi and southern Anhui have close relationships with the crust-mantle interaction and magmatic-tectonic activities. The types and scales of the mineralization on the both sides of the eastern Jiangnan Uplift were determined by fluid ore-forming systems and geological backgrounds.

Chemical and stable isotopic geochemical characteristics of ore-forming fluid of the Shizishan copper and gold ore-field,Tongling,China

Shizishan ore-field is a nonferrous and noble metal ore-field which is most rich in copper and gold.There are many types of fluid inclusions in minerals of the deposits.The homogeneous temperatures and the salinities of the fluid inclusions in main mineralization stages have wide ranges,while the different types of the fluid inclusions existed together and their homogeneous temperatures are almost identical in the same mineralization stage,which indicates that the ore-forming process has great relation with the fluid boiling.The gas and liquid chemical compositions and the carbon,hydrogen and oxygen isotopic compositions of the fluid inclusions show that the ore-forming fluids of copper-gold deposits have the same characteristics and evolution tendency,which reflects that the ore-forming material mainly came from the magmatism.The stratigraphic component and the meteoric water may mix in ore- forming fluids in the later mineralization stages.Furthermore,with the fall of the ore-forming temperature the ratios of water and rock decreased.The characteristics of chemical composition and carbon isotopic composition of fluid inclusions indicate that CH4 may play an important role for separating copper and gold in the ore-forming process.

The petrographical and isotope geochemical tracers for deep ore-forming fluids from the Laowangzhai gold depoist in the northern part of the Ailao Mountains

Based on the petrological studies of wall rocks, mineralized rocks, ores and veins from the Laowangzhai gold deposit, it is discovered that with the development of silification, carbonation and sulfidation, a kind of black opaque ultracrystalline material runs through the space between grains and amphibole cleavages, which is the product of fast condensing consolidation with magma mantle fluids turning into hydrothermal crustal fluids in the process of mineralization and alteration. It is thought that the water in ore-forming fluids mainly derived from magmatic water through research on H-O isotopes, and C as well as S isotopic compositions, has clear mantle-derived characteristics, and rock (mine) stones contain high 87Sr/86 Sr ratios, low 143Nd/144 Nd ratios and high 206Pb/204 Pb ratios, which also reflects the ore-forming fluids were derived from the metasomatically enriched mantle. In combination with the features of H-O-C-S isotopes and Sr-Nd-Pb isotopes described above, the ore-forming fluids of the Laowangzhai gold deposit in the northern part of the Ailao Mountains were derived mainly from the deep interior of the mantle, and their properties were transformed from magma fluids to hydrothermal fluids in the course of metasomatism and alteration, which initiated crust-mantle contamination simultaneously to be in favor of mineralization.

Characteristics and origin of ore-forming fluids of Jinchangqing gold (copper) ore deposit (s) in Xiangyun, Yunnan Province

On the basis of results of the studies of primary fluid inclusions, and the hydrogen and oxygen isotope data, the authors concluded that the early-stage ore-forming fluid from the Jinchangqing gold (copper) ore deposit is a kind of sulfate type hot brine characterized by medium temperature and salinity, genetically related to the late-stage ore-forming fluid derived from an acidic and more reductive environment. However, the late-stage ore-forming fluid is a sort of low temperature and low salinity chloride-type hot brine which originated from a lower pressure, acidic and more oxidative environment. In general, the ore fluids were derived from the late-stage, or largely from the early-stage groundwater-derived meteoric water, which has a 12‰-17‰ heavier oxygen isotopic composition than the original rain water (δ{}+{18}O={-15.3‰}), and were formed during gold mineralization as a product of oxygen isotope exchange during the reaction between ore-forming fluid and wall rocks under a lower water/rock ratio condition.

Characteristics of Pegmatite-Related Fluids and Significance to Ore-Forming Processes in the Zhaxikang Pb-Zn-Sb Polymetallic Deposit,Tibet,China

The Zhaxikang Pb-Zn-Sb polymetallic deposit is one of the most important deposits in the newly recognized southern Tibet antimony-gold metallogenic belt.Compared to the porphyry deposits in the Gangdese belt,much less researches have addressed these deposits,and the genesis of the Zhaxikang deposit is still controversial.Based on field investigation,petrographic,microthermometric,Laser Raman Microprobe（LRM） and SEM/EDS analyses of fluid,melt-fluid,melt and solid inclusions in quartz and beryl from pegmatite,this paper documents the characteristics and the evolution of primary magmatic fluid which was genetically related to greisenization,pegmatitization,and silification in the area.The results show that the primary magmatic fluids were derived from unmixing between melt and fluid and underwent a phase separation process soon after the exsolution.The primary magmatic fluids are of low salinity,high temperature,and can be approximated by the H_2O-NaCl-CO_2 system.The presence of Mn-Fe carbonate in melt-fluid inclusions and a Zn-bearing mineral（gahnite） trapped in beryl and in inclusions from pegmatite indicates high Mn,Fe,and Zn concentrations in the parent magma and magmatic fluids,and implies a genetic link between pegmatite and Pb-Zn-Sb mineralization.High B and F concentrations in the parent magma largely lower the solidus of the magma and lead to late fluid exsolution,thus the primary magmatic fluids related to pegmatite have much lower temperature than those in most porphyry systems.Boiling of the primary magmatic fluids leads to high-salinity and high-temperature fluids which have high capacity to transport Pb,Zn and Sb.The decrease in temperature and mixing with fluids from other sources may have caused the precipitation of Pb-Zn-Sn（Au） minerals in the distal fault systems surrounding the causative intrusion.

Characteristics and evolution of ore-forming fluids of the Chongjiang copper deposit in the Gangdise porphyry copper belt, Tibet

Petrography, microthermometry, and scanning electron microscope/energy dispersive spectrometer （SEM/EDS） studies were performed on the fluid inclusions in the ore-beating quartz veins and quartz phenocrysts in the porphyry of the Chongjiang porphyry copper deposit. The analyses of the fluid inclusions indicate that the ore-forming fluids were exsolved from magma. They are near-saturated, supercritical, rich in volatile constituents, and have the capture temperature of 362-389℃ and salinities of 17.7wt%- 18.9wt% NaC1 eq. With the decreasing of temperature and pressure, the supercritical fluids were separated into a low salinity vapor phase and a high salinity liquid phase. During quartz-sericitization, the high salinity fluid boiled and separated into a low salinity vapor phase and a high salinity liquid phase. The high salinity inclusions that formed in the boiling process had daughter mineral melting temperatures higher than the homogenization temperatures of the vapor and liquid phases. The late fluids that are responsible for argillization are of lower temperature and salinity.

Characteristics of Ore-forming Fluid of the Gaoshan Gold-Silver Deposit in the Longquan Area, Zhejiang Province and its Implications for the Ore Genesis

The Gaoshan gold-silver deposit, located between the Yuyao-Lishui Fault and Jiangshan- Shaoxing fault in Longquan Area, occurs in the Suichang-Longquan gold-silver polymetallic metallogenic belt. This study conducted an investigation for ore-forming fluids using microthermometry, D-O isotope and trace element. The results show that two types of fluid inclusions involved into the formation of the deposit are pure liquid phase and gas-liquid phase aqueous inclusions. The homogenization temperature and salinity of major mineralization phase ranges from 156~C to 236~C （average 200~C） and 0.35% to 8.68% （NaCleqv） （average 3.68%）, respectively, indicating that the ore-forming fluid is characteristic of low temperature and low salinity. The ore- forming pressure ranges between in 118.02 to 232.13＂105 pa, and it is estabmiated that the ore- forming depth ranges from 0.39 to 0.77 km, indicating it is a hypabyssal deposit in genesis. The low rare earth elements content in pyrites, widely developed fluorite in late ore-forming stage and lack of chlorargyrite （AgCI）, indicates that the ore-forming fluid is rich in F rather than CI. The ratios of Y/ Ho, Zr/Hf and Nb/Ta of between different samples have little difference, indicating that the later hydrothermal activities had no effects on the former hydrothermal fluid. The chondrite-normalized REE patterns of pyrites from country rocks and ore veins are basically identical, with the characteristics of light REE enrichment and negative Eu anomalies, implying that the ore-forming fluid was oxidative and derived partly from the country rocks. The JD and jlSo of fluid inclusions in quartz formed during the main metallogenic stage range from -105%o to -69 %0 and -6.01%o to -3.81%o, respectively. The D-O isotopic diagram shows that the metallogenic fluid is characterized by the mixing of formation water and meteoric water, without involvement of magmatic water. The geological and geochemical characteristics of the Gaoshan gold-silver deposit are similar to those of continental volcanic hydrothermal deposit, and could be assigned to the continental volcanic hydrothermal gold-silver deposit type.