Enhancing multifunctional photocatalysis with acetate-assisted cesium doping and unlocking the potential of Z-scheme solar water splitting

Graphitic carbon nitride(g-C_(3)N_(4))has been extensively doped with alkali metals to enlarge photocatalytic output,in which cesium(Cs)doping is predicted to be the most efficient.Nevertheless,the sluggish diffusion and doping kinetics of precursors with high melting points,along with imprecise regulation,have raised the debate on whether Cs doping could make sense.For this matter,we attempt to confirm the positive effects of Cs doping on multifunctional photocatalysis by first using cesium acetate with the character of easy manipulation.The optimized Csdoped g-C_(3)N_(4)(CCN)shows a 41.6-fold increase in visible-light-driven hydrogen evolution reaction(HER)compared to pure g-C_(3)N_(4) and impressive degradation capability,especially with 77%refractory tetracycline and almost 100%rhodamine B degradedwithin an hour.The penetration ofCs+is demonstrated to be a mode of interlayer doping,and Cs–N bonds(especially with sp^(2) pyridine N in C═N–C),along with robust chemical interaction and electron exchange,are fabricated.This atomic configuration triggers the broadened spectral response,the improved charge migration,and the activated photocatalytic capacity.Furthermore,we evaluate the CCN/cadmium sulfide hybrid as a Z-scheme configuration,promoting the visible HER yield to 9.02 mmol g^(−1) h^(−1),which is the highest ever reported among all CCN systems.This work adds to the rapidly expanding field of manipulation strategies and supports further development of mediating served for photocatalysis.

From the perspective of experimental practice: High-throughput computational screening in photocatalysis

Photocatalysis,a critical strategy for harvesting sunlight to address energy demand and environmental concerns,is underpinned by the discovery of high-performance photocatalysts,thereby how to design photocatalysts is now generating widespread interest in boosting the conversion effi-ciency of solar energy.In the past decade,computational technologies and theoretical simulations have led to a major leap in the development of high-throughput computational screening strategies for novel high-efficiency photocatalysts.In this viewpoint,we started with introducing the challenges of photocatalysis from the view of experimental practice,especially the inefficiency of the traditional“trial and error”method.Sub-sequently,a cross-sectional comparison between experimental and high-throughput computational screening for photocatalysis is presented and discussed in detail.On the basis of the current experimental progress in photocatalysis,we also exemplified the various challenges associated with high-throughput computational screening strategies.Finally,we offered a preferred high-throughput computational screening procedure for pho-tocatalysts from an experimental practice perspective(model construction and screening,standardized experiments,assessment and revision),with the aim of a better correlation of high-throughput simulations and experimental practices,motivating to search for better descriptors.

Synthesis of crystalline g-C_(3)N_(4) with rock/molten salts for efficient photocatalysis and piezocatalysis

Graphitic carbon nitride(g-C_(3)N_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics significantly restricts its practical applications.Currently,synthesizing highly crystalline g-C_(3)N_(4) with sufficient surface activities still remains challenging.Herein,different from using alkali molten salts which is commonly reported,we propose an approach for synthesis of highly crystalline g-C_(3)N_(4) with FeCl3/KCl rock/molten mixed salts.The rock salt can serve as the structure-directing template while molten salt provides the required liquid medium for re-condensation.Intriguingly,the synthesized photocatalyst showed further enhanced crystallinity and improved surface area along with high p/p*excitation compared with crystalline C_(3)N_(4) prepared from conventional molten-salt methods.These catalytically advantageous features lead to its superior photocatalytic and piezocatalytic activities with a high reactivity for overall water splitting that is not commonly reported for C_(3)N_(4).This work provides an effective strategy for structural optimization of organic semiconductor based materials and may inspire new ideas for the design of advanced photocatalysts.

Atomic Ni directional-substitution on ZnIn_(2)S_(4) nanosheet to achieve the equilibrium of elevated redox capacity and efficient carrier-kinetics performance in photocatalysis

It is a challenge to coordinate carrier-kinetics performance and the redox capacity of photogenerated charges synchronously at the atomic level for boosting photocatalytic activity.Herein,the atomic Ni was introduced into the lattice of hexagonal ZnIn_(2)S_(4) nanosheets(Ni/ZnIn_(2)S_(4))via directionalsubstituting Zn atom with the facile hydrothermal method.The electronic structure calculations indicate that the introduction of Ni atom effectively extracts more electrons and acts as active site for subsequent reduction reaction.Besides the optimized light absorption range,the elevation of Efand ECBendows Ni/ZnIn_(2)S_(4) photocatalyst with the increased electron concentration and the enhanced reduction ability for surface reaction.Moreover,ultrafast transient absorption spectroscopy,as well as a series of electrochemical tests,demonstrates that Ni/ZnIn_(2)S_(4) possesses 2.15 times longer lifetime of the excited charge carriers and an order of magnitude increase for carrier mobility and separation efficiency compared with pristine ZnIn_(2)S_(4).These efficient kinetics performances of charge carriers and enhanced redox capacity synergistically boost photocatalytic activity,in which a 3-times higher conversion efficiency of nitrobenzene reduction was achieved upon Ni/ZnIn_(2)S_(4).Our study not only provides in-depth insights into the effect of atomic directional-substitution on the kinetic behavior of photogenerated charges,but also opens an avenue to the synchronous optimization of redox capacity and carrier-kinetics performance for efficient solar energy conversion.

Engineering g-C_(3)N_(4)based materials for advanced photocatalysis:Recent advances

Photocatalysis driven by abundant yet intermittent solar energy has considerable potential in renewable energy generation and environmental remediation.The outstanding electronic structure and physicochemical properties of graphitic carbon nitride(g-C_(3)N_(4)),together with unique metal-free characteristic,make them ideal candidates for advanced photocatalysts construction.This review summarizes the up-to-date advances on g-C_(3)N_(4)based photocatalysts from ingenious-design strategies and diversified photocatalytic applications.Notably,the advantages,fabrication methods and limitations of each design strategy are systemically analyzed.In order to deeply comprehend the inner connection of theory–structure–performance upon g-C_(3)N_(4)based photocatalysts,structure/composition designs,corresponding photocatalytic activities and reaction mechanisms are jointly discussed,associated with introducing their photocatalytic applications toward water splitting,carbon dioxide/nitrogen reduction and pollutants degradation,etc.Finally,the current challenges and future perspectives for g-C_(3)N_(4)based materials for photocatalysis are briefly proposed.These design strategies and limitations are also instructive for constructing g-C_(3)N_(4) based materials in other energy and environment-related applications.

Self-adaptive bulk/surface engineering of Bi_(x)O_(y)Br_(z) towards enhanced photocatalysis:Current status and future challenges

The bulk/surface states of semiconductor photocatalysts are imperative parameters to maneuver their performance by significantly affecting the key processes of photocatalysis including light absorption,separation of charge carrier,and surface site reaction.Recent years have witnessed the encouraging progress of self-adaptive bulk/surface engineered Bi_(x)O_(y)Br_(z) for photocatalytic applications spanning various fields.However,despite the maturity of current research,the interaction between the bulk/surface state and the performance of Bi_(x)O_(y)Br_(z) has not yet been fully understood and highlighted.In this regard,a timely tutorial overview is quite urgent to summarize the most recent key progress and outline developing obstacles in this exciting area.Herein,the structural characteristics and fundamental principles of Bi_(x)O_(y)Br_(z)for driving photocatalytic reaction as well as related key issues are firstly reviewed.Then,we for the first time summarized different self-adaptive engineering processes over Bi_(x)O_(y)Br_(z)followed by a classification of the generation approaches towards diverse Bi_(x)O_(y)Br_(z)materials.The features of different strategies,the up-to-date characterization techniques to detect bulk/surface states,and the effect of bulk/surface states on improving the photoactivity of Bi_(x)O_(y)Br_(z)in expanded applications are further discussed.Finally,the present research status,challenges,and future research opportunities of self-adaptive bulk/surface engineered Bi_(x)O_(y)Br_(z)are prospected.It is anticipated that this critical review can trigger deeper investigations and attract upcoming innovative ideas on the rational design of Bi_(x)O_(y)Br_(z)-based photocatalysts.

Visible light triggered exfoliation of COF micro/nanomotors for efficient photocatalysis

We report a new facile light-induced strategy to disperse micron-sized aggregated bulk covalent organic frameworks(COFs)into isolated COFs nanoparticles.This was achieved by a series of metal-coordinated COFs,namely COF-909-Cu,-Co or-Fe,where for the first time the diffusio-phoretic propulsion was utilized to design COF-based micro/nanomotors.The mechanism studies revealed that the metal ions decorated in the COF-909 backbone could promote the separation of electron and holes and trigger the production of sufficient ionic and reactive oxygen species under visible light irradiation.In this way,strong light-induced self-diffusiophoretic effect is achieved,resulting in good dispersion of COFs.Among them,COF-909-Fe showed the highest dispersion performance,along with a drastic decrease in particle size from 5μm to500 nm,within only 30 min light irradiation,which is inaccessible by using traditional magnetic stirring or ultrasonication methods.More importantly,benefiting from the outstanding dispersion efficiency,COF-909-Fe micro/nanomotors were demonstrated to be efficient in photocatalytic degradation of tetracycline,about 8 times faster than using traditional magnetic stirring method.This work opens up a new avenue to prepare isolated nanosized COFs in a high-fast,simple,and green manner.

Efficient degradation of dye pollutants in wastewater via photocatalysis using a magnetic zinc oxide/graphene/iron oxide-based catalyst

In this paper, we present a proof-of-concept study of the enhancement of photocatalytic activity via a combined strategy of fabricating a visible-light responsive ternary heterostructure and improving overall photostability by incorporating magnetic zinc oxide/graphene/iron oxide (ZGF). A solvothermal approach was used to synthesize the catalyst. X-ray diffraction (XRD), scanning electron microscopic, energy dispersive X-ray, transmission electron microscopic, vibrating sample magnetometric, and ultraviolet–visible diffuse reflectance spectroscopic techniques were used to characterize the synthesized samples. The obtained optimal Zn(NO_(3))_(2) concentration, temperature, and heating duration were 0.10 mol/L, 600℃, and 1 h, respectively. The XRD pattern revealed the presence of peaks corresponding to zinc oxide, graphene, and iron oxide, indicating that the ZGF catalyst was effectively synthesized. Furthermore, when the developed ZGF was used for methylene blue dye degradation, the optimum irradiation time, dye concentration, catalyst dosage, irradiation intensity, and solution pH were 90 min, 10 mg/L, 0.03 g/L, 100 W, and 8.0, respectively. Therefore, the synthesized ZGF system could be used as a catalyst to degrade dyes in wastewater samples. This hybrid nanocomposite consisting of zinc oxide, graphene, and iron oxide could also be used as an effective photocatalytic degrader for various dye pollutants.

Solar Photocatalysis of A Pesticide in A Tubular Reactor on Titaniferous Sand as A New Semi-Conductor

This present study comes in addition to overcome the problems of separation of fine particles of TiO2 in heterogeneous photocatalysis after treatment. It aims to show the potential for using titaniferous sand as a new semiconductor under solar irradiation. The photocatalytic efficiency of this titaniferous sand was tested on a pesticide (Azadirachtin). A tubular photocatalytic reactor with recirculation of the polluting solution was designed for the elimination of the pesticide in an aqueous solution. Before its use as a photocatalyst, the titaniferous sand has undergone a specific treatment that consists of calcination at 600℃ followed by extraction of the calcined natural organic materials, which can interfere with the measurement of analytical parameters such as COD. The titaniferous sand was also characterized by X-ray fluorescence spectroscopy (XRF). XRF analyses have shown that TiO2 is predominant in the titaniferous sand with a percentage that has been estimated at 46.34%. The influence of various experimental parameters such as the flow rate of the polluting solution, the concentration of titaniferous sand, the presence of oxygen and the intensity of the overall rate of sunshine, was studied to optimize the photocatalytic degradation of the pesticide. The results showed that the highest removal rate (70%) was observed under the following conditions: a pH of 6, a titaniferous sand concentration of 150 g/L, a flow rate of 0.3 mL/min, and a sunshine rate of 354 W/m2 and in the presence of atmospheric oxygen. Under these experimental conditions, the rate of photodegradation of the pesticide follows the pseudo first order kinetic model of Langmuir Hinshelwood with a coefficient of determination R2 of 0.9869 and an apparent rate constant of 0.0029 min-1. The results clearly demonstrated the potential of titaniferous sand as a photocatalyst sensitive to sunlight for the effective removal of pesticides in the aquatic environment.

Rare earth ion modified TiO_2 sols for photocatalysis application under visible light excitation

TiO_2 sols modified by rare earth (RE) ions (Ce^(4+), Eu^(3+), or Nd^(3+))were prepared by coprecipitation-peptization method. The photocatalysis activity was studied byinvestigating the photodegradation effects of active brilliant red dye X-3B. It is found that TiO_2sols modified by Ce^(4+), Eu^(3+), or Nd^(3+) have the anatase crystalline structure, which areprepared at 70℃. All RE^(n+)-TiO_2 sol samples have uniform nanoparticles with similar morphology,which are homogenously distributed in aqueous colloidal systems. The particle sizes are 10, 8, and12 nm for Nd^(3+)-TiO_2, Eu^(3+)-TiO_2, and Ce^(4+)-TiO_2, respectively. The character of ultrafineand positive charge sol particles contributes to the good adsorption of X-3B dye molecule on thesurface of titania (about 30% X-3B adsorption amount). Experimental results exhibit thatRE^(n+)-TiO_2 sol photocatalysts have the capability to photodegrade X-3B under visible lightirradiation. Nd^(3+)-TiO_2 and Eu^(3+)-TiO_2 show higher photocatalytic activity than Ce^(4+)-TiO_2,which is due to the difference of standard redox potential of RE^(n+)/RE^((n-1)+). RE^(n+)-TiO_2sols demonstrate more excellent interfacial adsorption and photodegradation effects to X-3B thanP_(25) TiO_2 crystallites. Moreover, the degradation mechanism of X-3B is proposed as dyephotosensitization and electron scavenging by rare earth ions.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials:Strategies,Traps,Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century.Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials.This has led to significant interest in the exploitation of 2D nanomaterials for catalysis.There have been a variety of excellent reviews on 2D nanomaterials for catalysis,but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant.Here,we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials.Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted,which point out the differences and similarities of series issues for photocatalysis and electrocatalysis.In addition,2D nanocatalysts and their catalytic applications are discussed.Finally,opportunities,challenges and development directions for 2D nanocatalysts are described.The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

2D MXenes as Co-catalysts in Photocatalysis:Synthetic Methods

Since their seminal discovery in 2011,two-dimensional(2D)transition metal carbides/nitrides known as MXenes,that constitute a large family of 2D materials,have been targeted toward various applications due to their outstanding electronic properties.MXenes functioning as co-catalyst in combination with certain photocatalysts have been applied in photocatalytic systems to enhance photogenerated charge separation,suppress rapid charge recombination,and convert solar energy into chemical energy or use it in the degradation of organic compounds.The photocatalytic performance greatly depends on the composition and morphology of the photocatalyst,which,in turn,are determined by the method of preparation used.Here,we review the four different synthesis methods(mechanical mixing,self-assembly,in situ decoration,and oxidation)reported for MXenes in view of their application as co-catalyst in photocatalysis.In addition,the working mechanism for MXenes application in photocatalysis is discussed and an outlook for future research is also provided.

Role of transition metal oxides in g-C_(3)N_(4)-based heterojunctions for photocatalysis and supercapacitors

g-C_(3)N_(4) emerges as a star 2D photocatalyst due to its unique layered structure,suitable band structure and low cost.However,its photocatalytic application is limited by the fast charge recombination and low photoabsorption.Rationally designing g-C_(3)N_(4)-based heterojunction is promising for improving photocatalytic activity.Besides,g-C_(3)N_(4) exhibits great potentials in electrochemical energy storage.In view of the excellent performance of typical transition metal oxides(TMOs)in photocatalysis and energy storage,this review summarized the advances of TMOs/g-C_(3)N_(4) heterojunctions in the above two areas.Firstly,we introduce several typical TMOs based on their crystal structures and band structures.Then,we summarize different kinds of TMOs/g-C_(3)N_(4) heterojunctions,including type Ⅰ/Ⅱ heterojunction,Z-scheme,p-n junction and Schottky junction,with diverse photocatalytic applications(pollutant degradation,water splitting,CO_(2) reduction and N_(2) fixation)and supercapacitive energy storage.Finally,some promising strategies for improving the performance of TMOs/g-C_(3)N_(4) were proposed.Particularly,the exploration of photocatalysis-assisted supercapacitors was discussed.

Multifarious roles of carbon quantum dots in heterogeneous photocatalysis

As a new member of carbon material family, carbon quantum dots (CQDs) have attracted tremendous attentions for their potentials in the heterogeneous photocatalysis applications. Due to the unique microstructure and optical properties, the roles of CQDs played in the CQDs-based photocatalytic systems have been found to be diverse with the continuous researches in this regard. Herein, we provide a concise minireview to elaborate the multifarious roles of CQDs in photocatalysis, including photoelectron mediator and acceptor, photosensitizer, photocatalyst, reducing agent for metal salt, enhancing adsorption capacity and spectral converter. In addition, the perspectives on future research trends and challenges are proposed, which are anticipated to stimulate further research into this promising field on designing a variety of efficient CQDs-based photocatalysts for solar energy conversion. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B. V. and Science Press. All rights reserved.

Controllable nitridation of Ta_(2)_(O5) in molten salts for enhanced photocatalysis

Pyrolysis of the Ta_(2)_(O5)/melamine mixture in molten chlorides is herein demonstrated as a facile and controllable method to nitridize and functionalize Ta_(2)_(O5).The influence of the stoichiometry and composition of Ta_(2)_(O5)/melamine in molten salts on the nitridation process is rationalized to ensure the controllable preparation of Ta_(3)N_(5) and Ta_(3)N_(5)/TaON.The characterization results,including scanning electron microscopy,transmission electron microscopy,elemental mapping,X-ray photoelectron spectroscopy,and photoluminescence spectroscopy,all confirm the existence of the Ta_(3)N_(5)/TaON heterojunction,in which the TaON nanoparticles are closely anchored to the Ta_(3)N_(5) nanorods.Benefiting from its composition and structure,the Ta_(3)N_(5)/TaON composites show enhanced photocatalytic activity for the degradation of methylene blue.The present study highlights that the molten salt method using a solid nitrogen source can be a new technique for rationalizing the design of nitrides and oxynitrides.

Heterostructured ZnFe_2O_4/Fe_2TiO_5/TiO_2 Composite Nanotube Arrays with an Improved Photocatalysis Degradation Efficiency Under Simulated Sunlight Irradiation

To improve the visible light absorption and photocatalytic activity of titanium dioxide nanotube arrays(TONTAs), ZnFe_2O_4(ZFO) nanocrystals were perfused into pristine TONTA pipelines using a novel bias voltageassisted perfusion method. ZFO nanocrystals were well anchored on the inner walls of the pristine TONTAs when the ZFO suspensions(0.025 mg m L^(-1)) were kept under a60 V bias voltage for 1 h. After annealing at 750 °C for2 h, the heterostructured ZFO/Fe_2 TiO_5(FTO)/TiO_2 composite nanotube arrays were successfully obtained. Furthermore, Fe^(3+)was reduced to Fe^(2+)when solid solution reactions occurred at the interface of ZFO and the pristine TONTAs. Introducing ZFO significantly enhanced thevisible light absorption of the ZFO/FTO/TONTAs relative to that of the annealed TONTAs. The coexistence of type I and staggered type II band alignment in the ZFO/FTO/TONTAs facilitated the separation of photogenerated electrons and holes, thereby improving the efficiency of the ZFO/FTO/TONTAs for photocatalytic degradation of methylene blue when irradiated with simulated sunlight.

Synergistic Decolouration of Azo Dye by Pulsed Streamer Discharge Immobilized TiO_2 Photocatalysis

Photocatalyst was prepared by immobilizing TiO2 on glass beads using the traditional sol-gel method. Ultraviolet light （UV） produced by pulsed streamer discharge was then used to induce photocatalytic activity of TiO2 photocatalyst. Decolouration efficiency of the representative azo dye （acid orange 7, AOT） was investigated using the synergistic system of pulsed streamer discharge plasma and TiO2 photocatalysis. The obtained results showed that the decolouration rate of AO7 could be increased by 16.7% under the condition of adding supported TiO2 in the pulsed streamer discharge system, compared to that in the sole pulsed streamer discharge plasma system, due to the synergistic effect of pulsed streamer discharge and TiO2 photocatalysis induced by pulsed streamer discharge. The synergistic system of pulsed streamer discharge and TiO2 photocatalyst was found to have more reactive radicals for degradation of organic compounds in water.

Recent Advances on Porous Materials for Synergetic Adsorption and Photocatalysis

Porous photocatalysts are promising materials capable of simultaneously adsorbing and oxidizing/reducing target species,showing great potentials in environmental remediation and energy generation.This review offered a comprehensive overview of the recent progress in design,fabrication,and applications of porous photocatalysts,including carbon-based semiconductors,metal oxides/sulfides,metal–organic frameworks,and adsorbent–photocatalyst hybrids.The fundamental understanding of the structure–performance relationships of porous materials together with the in-depth insights into the synergetic effects between adsorption and photocatalysis was presented.The strategies to further improve the photocatalytic activity of porous photocatalysts were proposed.This review would provide references and outlooks of constructing efficient porous materials for adsorptive and photocatalytic removal of pollutants and energy production.

Visible Light-Responsive N-Doped TiO_(2) Photocatalysis:Synthesis,Characterizations,and Applications

Photocatalysis based on semiconductors has recently been receiving considerable research interest because of its extensive applications in environmental remediation and renewable energy generation.Various semiconductor-based materials that are vital to solar energy utilization have been extensively investigated,among which titanium oxide(TiO_(2))has attracted considerable attention because of its exceptional physicochemical characteristics.However,the sluggish responsiveness to visible light in the solar spectrum and the inefficient separation of photoinduced electron-hole pairs hamper the practical application of TiO_(2) materials.To overcome the aforementioned serious drawbacks of TiO_(2),numerous strategies,such as doping with foreign atoms,particularly nitrogen(N),have been improved in the past few decades.This review aims to provide a comprehensive update and description of the recent developments of N-doped TiO_(2) materials for visible lightresponsive photocatalysis,such as(1)the preparation of N-doped/co-doped TiO_(2) photocatalysts and(2)mechanistic studies on the reasons for visible light response.Furthermore,the most recent and significant advances in the field of solar energy applications of modified N-doped TiO_(2) are summarized.The analysis indicated the critical need for further development of these types of materials for the solar-to-energy conversion,particularly for water splitting purposes.

Designing all-solid-state Z-Scheme 2D g-C_3N_4/Bi_2WO_6 for improved photocatalysis and photocatalytic mechanism insight

Bi_2WO_6 was modified by two-dimensional g-C_3N_4(2D g-C_3N_4)via a hydrothermal method.The structure,morphology,optical and electronic properties were investigated by multiple techniques,including X-ray diffraction(XRD),X-ray photoelectron spectroscopy spectra(XPS),Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Ultravioletvisible diffuse reflection spectroscopy(DRS),photocurrent and electrochemical impedance spectroscopy(EIS),electron spin resonance(ESR),respectively.Rhodamine B(Rh B)was used as the target organic pollutant to research the photocatalytic performance of as-prepared composites.The Bi_2WO_6/2D g-C_3N_4exhibited a remarkable improvement compared with the pure Bi_2WO_6.The enhanced photocatalytic activity was because the photogenerated electrons and holes can quickly separate by Z-Scheme passageway in composites.The photocatalytic mechanism was also researched in detail through ESR analysis.