Effect of Pre-Sowing Treatments on Mamalis (Pittosporum pentandrum Blanco Merr.) Seeds Germination under Nursery Condition

Seeds were subjected to three different pre-sowing seed treatments: immersion in lukewarm water for 2 hours, immersion in concentrated sulfuric acid (H2SO4) for 5 minutes, hilar removal, and a control in which the seeds were sown without being treated. The experiment was laid out in the Completely Randomized Design (CRD) with four replicates and 60 seeds per treatment. Seeds were sown in an improvised Seedbox in October 2019. Germination was monitored daily for one month. The results showed that Mamalis seeds treated with lukewarm water have the earliest germination of twelve days, with a germination percentage of 66.67%. The germination rate of another treatment ranges from 0 - 44 percent, compared to 45 percent for the control treatment. It seems prudent to conclude that to enhance the vegetative propagation methods is to soaking in warm water at 37.5˚C for 2 hours could provide the best growth.

Application of the FCA-2500 spray-cascade pulp pre-treatment tank in flotation

新型FCA-2500型雾化—跌落式煤浆预处理器采用风动雾化喷射方式,箱体内布置带有坎条的滑板,使煤浆在跌落过程中,粗、细煤粒可获得不同的预处理时间;该处理器在临涣选煤厂的应用效果表明,节省浮选剂用量24.17%,达到了节能降耗的目的。

Pretreatment of coking wastewater using anaerobic sequencing batch reactor (ASBR)

A laboratory-scale anaerobic sequencing batch reactor (ASBR) was used to pretreat coking wastewater. Inoculated anaerobic granular biomass was acclimated for 225 d to the coking wastewater, and then the biochemical methane potential (BMP)of the coking wastewater in the acclimated granular biomass was measured. At the same time, some fundamental technological factors, such as the filling time and the reacting time ratio (tf/tr), the mixing intensity and the intermittent mixing mode, that affect anaerobic pretreatment of coking wastewater with ASBR, were evaluated through orthogonal tests. The COD removal efficiency reached 38％～50％ in the stable operation period with the organic loading rate of 0.37～0.54 kg COD/(m3.d) at the optimum conditions of tf/tr, the mixing intensity and the intermittent mixing mode. In addition, the biodegradability of coking wastewater distinctly increased after the pretreatment using ASBR. At the end of the experiment, the microorganism forms on the granulated sludge in the ASBR were observed using SEM (scanning electron microscope) and fluoroscope. The results showed that the dominant microorganism on the granular sludge was Methanosaeta instead of Methanosarcina dominated on the inoculated sludge.

Silver Nanowire Electrodes: Conductivity Improvement Without Post-treatment and Application in Capacitive Pressure Sensors

Transparent electrode based on silver nanowires(Ag NWs) emerges as an outstanding alternative of indium tin oxide film especially for flexible electronics. However, the conductivity of Ag NWs transparent electrode is still dramatically limited by the contact resistance between nanowires at high transmittance. Polyvinylpyrrolidone(PVP) layer adsorbed on the nanowire surface acts as an electrically insulating barrier at wire–wire junctions, and some devastating post-treatment methods are proposed to reduce or eliminate PVP layer, which usually limit the application of the substrates susceptible to heat or pressure and burden the fabrication with high-cost, time-consuming, or inefficient processes. In this work, a simple and rapid pre-treatment washing method was proposed to reduce the thickness of PVP layer from 13.19 to0.96 nm and improve the contact between wires. Ag NW electrodes with sheet resistances of 15.6 and 204 X sq-1have been achieved at transmittances of 90 and 97.5 %, respectively. This method avoided any post-treatments and popularized the application of high-performance Ag NW transparent electrode on more substrates. The improved Ag NWs were successfully employed in a capacitive pressure sensor with high transparency, sensitivity, and reproducibility.

Effect of Cross-flow Velocity on the Critical Flux of Ceramic Membrane Filtration as a Pre-treatment for Seawater Desalination

抽象预告的处理，供应一个马厩，高质量为反向的渗透(RO ) 喂膜，是为在海水颠倒渗透植物的成功的操作的关键步。在这研究，陶器的膜系统为海水脱盐作为预告的处理被采用。一个实验室实验被执行在批评流动上并且因而调查跨流动的速度的效果优化 permeate 流动。然后，飞行员测试被执行调查长期的表演。当跨流动的速度仅仅仅仅或在狂暴的流动区域在 laminar 流动区域变化时，结果证明没有批评流动上的跨流动的速度的重要效果，但是当跨流动的速度在转变区域变化时，效果是不同的。犯规的膜在 150 L 的 permeate 流动是细微的 ?? 敤摡攠摮吗？

Comparison of pre-treatment and post-treatment use of selenium in retinal ischemia reperfusion injury

AIM: To investigate the effects of selenium in rat retinal ischemia reperfusion(IR) model and compare pretreatment and post-treatment use.METHODS: Selenium pre-treatment group(n =8) was treated with intraperitoneal(i.p.) selenium 0.5 mg/kg for7 d and terminated 24 h after the IR injury. Selenium posttreatment group( n = 8) was treated with i. p. selenium0.5 mg/kg for 7d after the IR injury with termination at the end of the 7d period. Sham group(n =8) received i.p.saline injections identical to the selenium volume for 7d with termination 24 h after the IR injury. Control group(n =8) received no intervention. Main outcome measures were retina superoxide dismutase(SOD), glutathione(GSH),total antioxidant status(TAS), malondialdehyde(MDA),DNA fragmentation levels, and immunohistological apoptosis evaluation.RESULTS: Compared to the Sham group, selenium pre-treatment had a statistical difference in all parameters except SOD. Post-treatment selenium also resulted in statistical differences in all parameters except the MDA levels. When comparing selenium groups, the pre-treatment selenium group had a statistically higher success in reduction of markers of cell damage such as MDA and DNA fragmentation. In contrast, the post-selenium treatment group had resulted in statisticallyhigher levels of GSH. Histologically both selenium groups succeeded to limit retinal thickening and apoptosis. Pre-treatment use was statistically more successful in decreasing apoptosis in ganglion cell layer compared to post-treatment use.CONCLUSION: Selenium was successful in retinal protection in IR injuries. Pre-treatment efficacy was superior in terms of prevention of tissue damage and apoptosis.

Artificial neural network approach for rheological characteristics of coal-water slurry using microwave pre-treatment

Detailed experimental investigations were carried out for microwave pre-treatment of high ash Indian coal at high power level(900 W) in microwave oven. The microwave exposure times were fixed at60 s and 120 s. A rheology characteristic for microwave pre-treatment of coal-water slurry(CWS) was performed in an online Bohlin viscometer. The non-Newtonian character of the slurry follows the rheological model of Ostwald de Waele. The values of n and k vary from 0.31 to 0.64 and 0.19 to 0.81 Pa·sn,respectively. This paper presents an artificial neural network(ANN) model to predict the effects of operational parameters on apparent viscosity of CWS. A 4-2-1 topology with Levenberg-Marquardt training algorithm(trainlm) was selected as the controlled ANN. Mean squared error(MSE) of 0.002 and coefficient of multiple determinations(R^2) of 0.99 were obtained for the outperforming model. The promising values of correlation coefficient further confirm the robustness and satisfactory performance of the proposed ANN model.

Effect of different pre-sowing treatments on seed germination percentage and growth performance of Acacia auriculiformis

Seed morphology,germination and seedlings growth of Acacia auriculiformis were studied.The experiment was conducted in the nursery of Forestry and Wood Technology Discipline,Khulna University,Bangladesh.Matured seeds of the species were collected from healthy trees of road side plantation from different areas of Khulna District,Bangladesh and treated with five pre-sowing treatments（control,immersion in cold water,immersion in hot water,scarification with sand paper and immersion in concentrated H2SO4）.The average length,breadth and thickness were found to be（0.58±0.017） cm,（0.44±0.007） cm and（0.20±0.089） cm,respectively.Germination was conducted in polybags with a mixture of top soil,coconut husk,coarse sand,and fine sand in a ratio of 3：4：1：1.Results reveal that pre-sowing treatments influences the germination rates of seeds that significantly increase the percentage germination compared with those in control（43%） and cold water treatment（52%）.The highest germination success rate was found 83% in hot water treatment followed by 78% in scarification with sand paper,and 75% with immersion in H2SO4.Germination started from 7 to 12 days and completed between 28 and 35 days period in all treatments.ANOVA showed the significant difference（p0.05） among the treatments in seed germination,but no significant difference among treatment with regard to starting day,closing day and total germination period.In case of height and diameter growth,seedlings originated from the seeds with hot water treatment shows significantly higher in wet season（from May to July）.Hot water treatment can be recommended on seed germination of the species in rural Bangladesh.

Effect of pre-sowing treatments on germination and initial seedling development of Albizia saman in the nursery

Albizia saman (Jacq ) F。Muell。通常作为雨知道树种子与五预先播种被对待学习预先播种的效果的处理在托儿所的萌芽和起始的幼苗开发上的处理。实验在林地和环境科学的研究所的托儿所被建立， Chittagong 的大学， Chittagong，孟加拉国。结果揭示了在种子的一个方面抓紧的那根钉子(在 theseed 的远侧的结束)(T_4 ) 提供(50%) 最高播种萌芽。第二最高的萌芽(42%) 为为 24 h (T_1 ) 在冷水里与沉浸对待的种子被获得。当为 30 s 在煮的水里沉浸的种子在为 24 h 浸泡的冷水里列在后面时，萌芽完全被禁止。另外的萌芽参数和起始的词法生长和幼苗的生物资源生产与控制(T_0 ) 相比为处理 T_4 和 T_1 也是更高的处理。例如钉子在一个抓紧的 T_4 的预先播种的处理种子站在一起(在种子的远侧的结束) 并且 T_1 (为 24 h 在冷水里沉浸的种子) 可以在托儿所为最大的萌芽和 Albizia saman 的起始的精力旺盛的幼苗生长被推荐。

Effect of pre-annealing treatment on the microstructure and mechanical properties of extruded Al–Zn–Mg–Cu alloy bars

Taking extruded Al–Zn–Mg–Cu alloy(7A04 alloy) bars as the research object, the effect and mechanism of pre-annealing treatments on the microstructure and mechanical properties of the aged alloy bars were investigated. The results show that a pre-annealing treatment at 350°C for 15 h before a T6 treatment substantially reduced the sensitivity of the microstructure and mechanical properties of the extruded 7A04 aluminum alloy specimens toward the extrusion temperature. The average grain sizes of the specimens extruded at 390 and 430°C after T6 treatment were 3.4 and 8.1 μm, respectively, and their elongations to failure were 7.0% and 9.2%, respectively. However, after pre-annealing + T6 treatment, the differences in both the grain sizes and the elongations of the specimens became small, i.e., their average grain sizes were 3.2 and 3.8 μm and their elongations were 12.0% and 13.3%, respectively. For the specimens extruded at the same temperature, pre-annealing treatment obviously improved the plasticity of the alloy, which is attributed to an increase in soft texture or to grain refinement in the specimens as a result of the pre-annealing + T6 treatment.

Novel Pretreatment of Hard Metal Substrate for Better Performance of Diamond Coated Cutting Tools

A surface engineering approach for a novel pre-treatment of hard metal tool substrate for optimum adhesion of diamond coatings is presented. Firsfly, an alkaline solution was used to etch the WC grains to generate a rough surface for better mechanical interlocking. Subsequently, surface Co was removed by etching in acid solution. Then the hard metal substrate was boronized to form a compound interlayer which acted as an efficient diffusion barrier to prevent the outward diffusion of Co. Novel nano-microcrystalline composite diamond film coatings with a very smooth surface was deposited on the surface engineering pre-treated hard metal surface. Promising results of measurement in adhesion strength as well as field cutting tests have been obtained.

Prolonged Seed Dormancy in <i>Phyllanthus emblica</i>L. Can Be Overturned by Seed Scarification and Gibberellin Pre Treatment

Phyllanthus emblica L. is an important constituent of Ayurvedic medicine and a fresh fruit species in the market in Sri Lanka. Therefore, it has a high potential to be established as a commercial fruit crop. The seeds of P. emblica are semi orthodox and exhibit a long dormancy period hindering the natural sexual propagation. Therefore, it still remains as an underutilized fruit crop in Sri Lanka due to its lack of quality planting material and poor propagation techniques. Long term dormancy also causes a big challenge in germinating seeds to create populations in breeding programs. In order to promote P. emblica from its underutilized status, what seems most feasible is to develop a method to break up the seed dormancy artificially. In order to do so, the methods of breaking the dormancy of P. emblica seeds have to be studied. Therefore, the aim of this study was to identify a method to break up the seed dormancy of P. emblica. The seeds were extracted from 21 trees belonging to three different districts in Sri Lanka. The selected viable seeds were subjected to four different pre treatments: none treated seeds (i.e. control), seeds scarified, seeds scarified and treated with 1% gibberellin and seed coat removed and followed by seeds treated with 1% gibberellin. From the four treatments, seed dormancy was overturned with a germination percentage of 43% by the seed pre treatment where the seeds were scarified and treated with 1% gibberellin and no other pre treatment methods were successful in breaking the dormancy. This suggests that the natural germination potential of P. emblica seeds is very low and it can be overridden by seed scarification and gibberellin pre treatment.

Effects of pre-aging treatment on subsequent artificial aging characteristics of Al-3.95Cu-(1.32Mg)-0.52Mn-0.11Zr alloys

The effects of pre-aging treatments on subsequent artificial aging response were investigated by means of transmission electron microscopy observations and hardness test in age hardened Al-3.95Cu-(1.32Mg)-0.52Mn-0.11 Zr alloys. In Al-3.95Cu-0.52Mn-0.11 Zr alloy, when the pre-aging temperature is 25 °C, the pre-aging treatment has no evident effect on the peak hardness of subsequent artificial aging, while a positive effect(increase of peak hardness) appears when pre-aging temperature is50 °C. However, in Al-3.95Cu-1.32Mg-0.52Mn-0.11 Zr alloy, it is found that whether the pre-aging temperature is 25 °C or 50 °C,the peak artificial aging hardness is lower than that of T6 treated alloy, that is to say, pre-aging treatment has a negative effect on the peak hardness of subsequent artificial aging in the alloys.

Tooth loss caused by displaced elastic during simple preprosthetic orthodontic treatment

The use of elastics to close a diastema or correct tooth malpositions can create unintended consequences if not properly controlled. The American Association of Orthodontists recently issued a consumer alert, warning of "a substantial risk for irreparable damage" from a new trend called "do-it-yourself" orthodontics, consisting of patients autonomously using elastics to correct tooth position. The elastics can work their way below the gums and around the roots of the teeth, causing damage to the periodontium and even resulting in tooth loss. The cost of implants to replace these teeth would well exceed the cost of proper orthodontic care. This damage could also occur in a dental office, when a general dentist tries to perform a simplified orthodontic correction of a minor tooth malposition. The present case report describes a case of tooth loss caused by a displaced intraoral elastic, which occurred during a simple preprosthetic orthodontic treatment.

Prevalence of hepatocarcinoma-related hepatitis B virus mutants in patients in grey zone of treatment

BACKGROUND Antiviral treatment of patients with chronic hepatitis B(CHB)in the grey zone of treatment comands risk management in order to optimize the health outcome.In this sense,the identification of HBV mutants related with an increased risk of hepatocellular carcinoma(HCC)could be useful to identify subpopulations with potential indication of antiviral treatment.AIM To analyze the prevalence/persistence of hepatitis B virus(HBV)preS and basal core promoter(BCP)/precore/core variants associated to HCC development in CHB patients in the grey zone.METHODS Work was designed as a longitudinal retrospective study,including 106 plasma samples from 31 patients with CHB in the grey zone of treatment:Hepatitis B e antigen negative,HBV-DNA levels between 12-20000 IU/mL,normal or discordant transaminase levels during follow up and mild/moderate necroinflammatory activity in liver biopsy or Fibroscan(up to 9.5 kPa).Serum HBVDNA was tested using the Abbott Real Time HBV Assay and the BCP/precore/core and the hepatitis B surface antigen(HBsAg)coding regions were analyzed in positive samples by PCR/bulk-sequencing to identify the HCCrelated HBV mutants.RESULTS High-risk HCC related mutants were detected in 24(77%)patients:19(61%)in the BCP/precore/core,and 7(23%)in the HBsAg coding region(2 preS1 and 5 preS2 deletions).The prevalence of preS deletions was genotype-dependent:3/5(60%)patients with preS2 deletions and 1/2 with preS1 deletions were infected with the HBV-E genotype.Since HBV-E was the most prevalent in sub-Saharan patients,a correlation between preS deletions and ethnicity was also found:6/8(75%)sub-Saharan vs 1/19(5%)Caucasian patients had preS deletions(P=0.00016).Remarkably,this correlation was maintained in those patients infected with HBV-A,a minor genotype in sub-Saharan patients:2/2 patients infected with HBV-A from West Africa vs 0/6 of Caucasian origin had preS deletions.The HCC related variants were the major strains and persisted over time(up to 48 mo).Patients with preS deletions had a significant higher prevalence of F2 fibrosis stage than the negatives(57%vs 10%,P=0.0078).CONCLUSION HBV genetic analysis of selected populations,like sub-Saharans infected with HBV-E/A genotypes,will allow identification of subpopulations with risk of HCC development due to accumulation of high-risk HBV variants,thus commanding their increased clinical surveillance.

Removal of cyclops in pre-oxidizing cooperation water treatment process

Zooplankton cyclops propagates profusely in waterbody, cannot be effectively inactivated by conventional disinfec- tion process, and becomes a troublesome drinking water treatment problem. In this work, the qualitative and quantitative ex- perimental studies were carried out on inactivation of zooplankton cyclops using oxidants, such as chlorine (Cl2), chlorine dioxide (ClO2), ozone (O3), hydrogen peroxide (H2O2), ozone/hydrogen peroxide (O3/H2O2), chloramines (Cl2-NH3) and potassium permanganate (KMnO4). The influences of various factors include different oxidant dosages, organic substance contents and pH values. The results showed that currently available oxidants used all might inactivate cyclops in some extent. According to the experimental results, chlorine dioxide, ozone, ozone/hydrogen peroxide and chloramines can be selected as effective oxidants for inactivating cyclops because of their strong inactivation abilities. Then the synergic removal effects on cyclops with ozone, ozone/hydrogen peroxide pre-oxidation followed by conventional water treatment processes were investigated. The results showed that ozone and ozone/hydrogen peroxide pre-oxidation can inactivate cyclops effectively, which then can be removed thoroughly by conventional water treatment processes. Cyclops cannot appear in water after filtration with 1.65 mg/L of ozone and 6 mg/L of hydrogen peroxide, with the inactivation rate being 62% before conventional water treatment processes. Cyclops cannot appear in water after filtration with 1.8 mg/L of ozone, with the inactivation rate being 50% before conventional water treatment processes. For different oxidants, when removal rate was the best, the inactivation rate was not the same. These results may pro- vide reference and model for actual waterworks.

Effects of Fillerwire Composition along with Different Pre- and Post-Heat Treatment on Mechanical Properties of AISI 4130 Welded by the GTAW Process

This research intends to find out the optimal mechanical properties of AISI 4130 steel welded by the GTAW process. Six test plates were joined by two types of filler wire with similar chemical composition to the base metal, and with lower carbon content and slightly higher alloy elements content compared to the first one. Test plates then exerted three different pre-heat and post-heat treatments on both groups. The three types of heat treatments were alternatively without pre-heat and post-heat, with pre-heat only, and finally with pre-heat and post-heat. Tensile, side bends and impact tests (for weld zone and HAZ) have been conducted. Results show that using low-carbon filler wire along with pre- and post-heat resulted in outstanding mechanical properties.

数智化全自动标本转移系统在手术病理标本前处理流程中的应用

目的:探讨在数智化管理背景下,由手术室护士主导的数智化全自动标本转移系统在手术病理标本前处理流程中的应用效果,为提高手术病理标本质量提供参考。方法:构建数智化全自动标本转移系统,并将其应用于手术病理标本前处理流程中,比较系统应用前(2023年4月—7月)和系统应用后(2023年8月—11月)的病理标本送检效率、送检质量、手术室护士心理压力及医护人员满意度。结果:应用数智化全自动标本转移系统后,病理标本前处理流程时长较应用前平均减少3.66 min,一次性接收合格率由87.07%提高至96.42%,病理送检质量满意率较高,护士工作压力显著缓解,医务人员满意度明显提高,以上差异均具有统计学意义(P<0.05)。结论:数智化全自动标本转移系统应用于手术标本前处理流程中可有效提高手术标本前处理效率并缓解护士工作压力,保障病理标本送检质量,为医疗诊断提供可靠的依据,有效减少医务人员职业暴露,提升医护人员满意度。

真空冷冻预干燥对压差膨化干燥果蔬脆片质地特性的影响

为探索预干燥处理对不同果蔬脆片结构及质地特性的影响,该研究采用真空冷冻干燥作为预干燥,并选取了3个水分转换点(60%、45%、30%),对预干燥过程中6种典型果蔬(苹果,梨,桃,山药,马铃薯,青萝卜)水分状态、细胞结构、收缩率、孔隙度、应力-松弛特性与质地特性进行测定与分析。结果表明,随着预干燥的进行,水分含量逐渐降低,自由水逐渐散失,以不易流动水为主,收缩率逐渐减小,孔隙度逐渐增大,硬度、咀嚼性、弹性模量逐渐增加;水分转换点为60%时不同果蔬脆片具有较高的硬脆度,其中马铃薯与山药脆片硬度较高,桃与梨的脆片脆度较高;水分转换点为30%时,6种果蔬的孔隙度最高,且青萝卜的孔隙度显著高于其他果蔬(P <0.05);在干燥后期,果蔬样品骨架基本形成,且收缩率较低,致使内部孔隙度变大;由相关性分析可知真空冷冻预干燥过程中水分转换点、孔隙度与果蔬脆片质地特性极显著相关(P <0.05),研究结果可为预干燥对果蔬脆片质地影响提供参考。