Radio frequency windows are developed and evaluated for a 650 MHz continuous-wave multibeam klystron.Thin-pillbox windows with alumina and beryllia disks are designed with an average RF power of CW 400 kW.Results of a...Radio frequency windows are developed and evaluated for a 650 MHz continuous-wave multibeam klystron.Thin-pillbox windows with alumina and beryllia disks are designed with an average RF power of CW 400 kW.Results of a cold test and tuning procedures are described.The final measured S11 curves under the required bandwidth are less than-32.0 and-26.9 dB for alumina and beryllia windows,respectively.The windows are tested up to CW 143 kW for traveling waves and CW 110 kW for standing waves using a solid-state amplifier as an RF power source.Multipactor simulations for windows and benchmark studies for the thermal analysis of ceramic disks are introduced.展开更多
A 50 mA CW deuteron RFQ is being built for a joint 973 project between Peking University and the Institute of Modern Physics. This RFQ adopts a high-frequency window-type structure. To study its RF properties and to v...A 50 mA CW deuteron RFQ is being built for a joint 973 project between Peking University and the Institute of Modern Physics. This RFQ adopts a high-frequency window-type structure. To study its RF properties and to validate the reliability of an electromagnetic simulation, two full-length aluminum models with tuners were built in succession. RF measurements were obtained from the test bench and compared to the simulations, including frequencies, quality factors, and electric fields of different modes and the field in aperture. Through field tuning, the maximal field unflatness for a single quadrant and the average asymmetry of four quadrants were reduced from 8.7% and ± 3.6% to 5.8% and ± 1.7%, respectively.Moreover, a tuning method of adjusting the gap distance between the endplates and the vanes was also studied in this paper.展开更多
The formula for calculating the threshold of average transmitting power of cylindrical TE11 mode window is revised by accurate deduction and a practical method for calculating the temperature increment of the dielectr...The formula for calculating the threshold of average transmitting power of cylindrical TE11 mode window is revised by accurate deduction and a practical method for calculating the temperature increment of the dielectric disk in cylindrical box type window is given. Meanwhile,a typical cylindrical box type window is calculated and used as an example to discuss the power capacity, the special harmfulness and elimination of ghost mode resonance when the window is used to transmit high power Continuous Wave(CW).展开更多
文摘Radio frequency windows are developed and evaluated for a 650 MHz continuous-wave multibeam klystron.Thin-pillbox windows with alumina and beryllia disks are designed with an average RF power of CW 400 kW.Results of a cold test and tuning procedures are described.The final measured S11 curves under the required bandwidth are less than-32.0 and-26.9 dB for alumina and beryllia windows,respectively.The windows are tested up to CW 143 kW for traveling waves and CW 110 kW for standing waves using a solid-state amplifier as an RF power source.Multipactor simulations for windows and benchmark studies for the thermal analysis of ceramic disks are introduced.
基金supported by the National Basic Research Program of China(No.2014CB845503)
文摘A 50 mA CW deuteron RFQ is being built for a joint 973 project between Peking University and the Institute of Modern Physics. This RFQ adopts a high-frequency window-type structure. To study its RF properties and to validate the reliability of an electromagnetic simulation, two full-length aluminum models with tuners were built in succession. RF measurements were obtained from the test bench and compared to the simulations, including frequencies, quality factors, and electric fields of different modes and the field in aperture. Through field tuning, the maximal field unflatness for a single quadrant and the average asymmetry of four quadrants were reduced from 8.7% and ± 3.6% to 5.8% and ± 1.7%, respectively.Moreover, a tuning method of adjusting the gap distance between the endplates and the vanes was also studied in this paper.
文摘The formula for calculating the threshold of average transmitting power of cylindrical TE11 mode window is revised by accurate deduction and a practical method for calculating the temperature increment of the dielectric disk in cylindrical box type window is given. Meanwhile,a typical cylindrical box type window is calculated and used as an example to discuss the power capacity, the special harmfulness and elimination of ghost mode resonance when the window is used to transmit high power Continuous Wave(CW).
