Efficient and selective removal of Pb(Ⅱ) from landfill leachate using L-serine-modified polyethylene/polypropylene nonwoven fabric synthesized via radiation grafting technique

In this study,to efficiently remove Pb(Ⅱ) from aqueous environments,a novel L-serine-modified polyethylene/polypropylene nonwoven fabric sorbent(NWF-serine)was fabricated through the radiation grafting of glycidyl methacrylate and subsequent L-serine modification.The effect of the absorbed dose was investigated in the range of 5–50 kGy.NWF-serine was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,and scanning electron microscopy.Batch adsorption tests were conducted to investigate the influences of pH,adsorption time,temperature,initial concentration,and sorbent dosage on the Pb(Ⅱ) adsorption performance of NWF-serine.The results indicated that Pb(Ⅱ) adsorption onto NWF-serine was an endothermic process,following the pseudo-second-order kinetic model and Langmuir isotherm model.The saturated adsorption capacity was 198.1 mg/g.NWF-serine exhibited Pb(Ⅱ) removal rates of 99.8% for aqueous solutions with initial concentrations of 100 mg/L and 82.1% for landfill leachate containing competitive metal ions such as Cd,Cu,Ni,Mn,and Zn.Furthermore,NWF-serine maintained 86% of its Pb(Ⅱ) uptake after five use cycles.The coordination of the carboxyl and amino groups with Pb(Ⅱ) was confirmed using X-ray photoelectron spectroscopy and extended X-ray absorption fine structure analysis.

CHARACTERIZATION OF RADIATION GRAFTING DEGREE OF POLYSTYRENEg-ACRYLIC ACID BY XPS

In this work, characterization of radiation grafting degree of polystyrene-g-acrylic acid by XPS was studied. It is found that along with the main peak C_(1s) there is a photoelectron peak at 289.0 eV that appears to be C_(1s) of-(?)-OH group and shows the presence ofpolyacrylic acid grafted on the polystyrene The grafting degree obtained by XPS is in agreement with that from the gravimetric method.

Antimicrobial Expanded Polytetrafluoroethylene Film Prepared by 3-ray Radiation Induced Grafting of Poly（acrylic acid）

The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic acid） （PAA） can be controlled by the monomer concentration, absorbed dose, and dose rate under an optimal inhibitor concentration of [Fe2＋]=18 mmol/L. SEM observation showed that the macroporous structure in ePTFE films would be covered gradually with the increase of the DG of PAA. The prepared ePTFE-g-PAA film was im- mersed in a neutral silver nitrate solution to fabricate an ePTFE-g-PAA/Ag hybrid film after the addition of NaBH4 as a reduction agent of Ag＋ to Ag atom. SEM, XRD, and XPS results proved that Ag nanoparticles with a size of several tens of nanometers to 100 nanometers were in situ immobilized on ePTFE film. The loading capacity of Ag nanoparticles could be tuned by the DG of PAA, and determined by thermal gravimetric analysis. The quart- titative antibacterial activity of the obtained ePTFE-g-PAA/Ag hybrid films was measured using counting plate method. It can kill all the Escherichia coli in the suspension in 1 h. Moreover, this excellent antibacterial activity can last at least for 4 h. This work provides a facile and practical way to make ePTFE meet the demanding antimicrobial requirement in more and more practical application areas.

Radiation Induced Grafting of Acrylic Acid onto Viscose Rayon Fabrics and Its After-Effects

Radiation induced grafting of various polymers with different monomers proved to be an attractive means to modify the physical or chemical properties of polymeric materials or textile fabrics. In the present work, radiation induced grafting of viscose rayon fabrics, consisting mainly of cellulose fibers, with acrylic acid monomer has been carried out. The grafting yields have been thoroughly studied as a function of different applied experimental parameters. The impact of the graft yield on the physical properties of the fabrics such as tensile strength, elongation, swelling, moisture absorption, crease recovery angle and also the dyeing properties of the fabrics has been studied. The effect of increasing the contact time of the fabric and monomer solution, at room temperature, after stopping irradiation has been studied in detail as well as the effect of temperature on the irradiated samples also after stopping irradiation. The best grafting yield was obtained on irradiating viscose rayon fabric in methanol-water solvent containing acrylic acid monomer, at a dose 20 kGys, then heating for 7 hours at 80℃ and finally keeping the samples at room temperature for about 20 hours. That treatment significantly increased the final graft yield.

Enhance of Grafting Reaction of Acrylic Acid and Acrylamide onto Preirradiated Polypropylene Film

Grafting of acrylic acid (AAc) and acrylamide (AAm) onto preirradiated PP film was performed in aqueous solution of AAc and AAm, respectively. Electron beam accelerator was used as irradiation source. The effect of ferrous sulfate, sodium nitrate, methanol and glucose on the degree of grafting was demonstrated. The function of the different additives was compared by the grafting of different monomers (AAc and AAm). The results show that the four of these additives are elective on the grafting of AAc. Only two of these additives, ferrous sulfate and methanol were effective on the grafting of AAm.

APPLICATION OF SURFACE GRAFTED POLY N-ISOPROPYL ACRYLAMIDE BY RADIATION TECHNOLOGY FOR PROTEIN SOLUTION CONCENTRATION

Poly N-isopropyl acrylamide (abbreviated as PNIPA) as a kind of thermally sensitive hydrogel is utilized to concentrate Bovin Serum Albumin (BSA) solution. In order to decrease its surface adsorption to BSA in aqueous solution, surface layer grafting of the gels by radiation technology was carried out. The results showed that hydroxyl propyl methacrylate (HPMA) grained gel exhibited a low level of BSA adsorption and still kept the original thermally sensitive properties of PNIPA hydrogels.

CHARACTERIZATION OF RADIATION GRAFT COPOLYMER OF INORGANIC COMPOUND ONTO ALKENE

In this paper, the radiation graft copolymer of MgO, SiO2 and-Y- molecularsieve onto organic compounds, such as methacrylate, styrene and acrylonitrile obtained by per-rndiation method were characterized by X- ray diffraction, pyrolysis gas chromatography, GPC and X-ray photoelectron spectroscopy.

Branched fibrous amidoxime adsorbent with ultrafast adsorption rate and high amidoxime utilization for uranium extraction from seawater

Direct collection of uranium from low uranium systems via adsorption remains challenging.Fibrous sorbent materials with amidoxime(AO)groups are promising adsorbents for uranium extraction from seawater.However,low AO adsorption group utilization remains an issue.We herein fabricated a branched structure containing AO groups on polypropylene/polyethylene spun-laced nonwoven(PP/PE SNW)fibers using grafting polymerization induced by radiation(RIGP)to improve AO utilization.The chemical structures,thermal properties,and surface morphologies of the raw and treated PP/PE SNW fibers were studied.The results show that an adsorptive functional layer with a branching structure was successfully anchored to the fiber surface.The adsorption properties were investigated using batch adsorption experiments in simulated seawater with an initial uranium concentration of 500μg·L^(−1)(pH 4,25℃).The maximum adsorption capacity of the adsorbent material was 137.3 mg·g^(−1)within 24 h;moreover,the uranyl removal reached 96%within 240 min.The adsorbent had an AO utilization rate of 1/3.5 and was stable over a pH range of 4–10,with good selectivity and reusability,demonstrating its potential for seawater uranium extraction.

New Sorbent for Bilirubin Removal from Human Plasma: Albumin Immobilized Microporous Membranous PTFE Capillaries

In this study, we developed a tailored capillary sorbent for bilirubin removal. For immobilized bioligand, capillaries were grafted with epoxy groups using RIGP. The HSA immobilized capillaries has a high affinity adsorption capacity （71.2 mg bilirubin/g polymer） and a shorter adsorption equilibrium time （about 60 min）.

Affinity Adsorption of Bilirubin on Cibacron Blue F3GA-modified Microporous Polytetrafluoroethylene Capillary

Bilirubin removal from human plasma was obtained via an affinity microporous polytetrafluoroethylene（MPTFE） capillary. The new adsorbent comprised grafted glycidyl methacrylate（GMA） via radiation-induced polymerization as hydrophilic coating and reactive sites; ethylenediamine（EDA） as a spacer arm; Cibacron Blue F3GA（CB F3GA） as an affinity ligand; MPTFE capillary as the supporting matrix. The average density of CB F3GA attachment to MPTFE capillaries was found to be 136.5 μmol/g. The capacity of bilirubin adsorbed on affinity MPTFE capillaries is 76.1 mg bilirubin/g polymer（at 25℃）. This new adsorbent has advantages over both membrane and traditional micro-column, and this system is stable and easy to operate. The results of blood tests suggest the CB F3GA affinity capillary has good blood compatibility.

Radiation induced graft polymerization of multi-walled carbon nanotubes for superhydrophobic composite membrane preparation

Highly soluble multi-walled carbon nanotubes （MWNTs） were prepared by radiation-induced free radical graft polymerization of vinyl acetate （VAc） onto pristine MWNT surfaces. High resolution transmission electron microscopy （HR-TEM）, Fourier transform infrared （FT1R） spectroscopy, and micro-Raman spectroscopy were used to confirm that poly（vinyl acetate） （PVAc） had been successfully grafted onto the surface of the MWNTs. The effects of experimental parameters on the degree of graft- ing （DG） of PVAc were also investigated, including adsorbed dose, dose rate, initial monomer concentration, and solvents. The grafted MWNTs （MWNTs-g-PVAc） exhibited good solubility in common organic solvents at high mass fraction. In addition, a superhydrophobic composite membrane could be readily fabricated by vacuum filtration of MWNTs-g-PVAc onto a support- ing membrane, as was confirmed by water contact angle testing and visualization by scanning electron microscopy.

Advances in the surface modification techniques of bone-related implants for last 10 years

At the time of implanting bone-related implants into human body,a variety of biological responses to the material surface occur with respect to surface chemistry and physical state.The commonly used biomaterials(e.g.titanium and its alloy,Co–Cr alloy,stainless steel,polyetheretherketone,ultra-high molecular weight polyethylene and various calcium phosphates)have many drawbacks such as lack of biocompatibility and improper mechanical properties.As surface modification is very promising technology to overcome such problems,a variety of surface modification techniques have been being investigated.This review paper covers recent advances in surface modification techniques of bone-related materials including physicochemical coating,radiation grafting,plasma surface engineering,ion beam processing and surface patterning techniques.The contents are organized with different types of techniques to applicable materials,and typical examples are also described.

Properties and evaluation of amidoxime-based UHMWPE fibrous adsorbent for extraction of uranium from seawater

An amidoxime-based ultra-high molecular weight polyethylene （UHMWPE） fibrous adsorbent was successfully prepared by T-irradiation-induced graft copolymerization of acrylonitrile （AN） and acrylic acid （AA）, followed by amidoximation. The grafting of AN and AA on the UHMWPE fiber and the amidoximation of the grafted fiber were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The mechanical property of the original and modified UHMWPE fibers was compared by single-filament strength test. The adsorption property of the UHMWPE fibrous adsorbent was evaluated by adsorption test in uranyl nitrate solution and seawater. The surface of the modified UHMWPE fibers was covered by the grafting layer and became rough. The tensile strength of the amidoxime-based UHMWPE fibrous adsorbent was influenced by the absorbed dose and hydrochloric acid elution, but was independent of the grafting yield and amidoximation. The uranium adsorption amount of the amidoxime-based UHMWPE fibrous adsorbent after immersing in seawater for 42 days was 2.3 mg-U/g.