Multi-layer quasi-zero-stiffness meta-structure for high-efficiency vibration isolation at low frequency

An easily stackable multi-layer quasi-zero-stiffness(ML-QZS)meta-structure is proposed to achieve highly efficient vibration isolation performance at low frequency.First,the distributed shape optimization method is used to design the unit cel,i.e.,the single-layer QZS(SL-QZS)meta-structure.Second,the stiffness feature of the unit cell is investigated and verified through static experiments.Third,the unit cells are stacked one by one along the direction of vibration isolation,and thus the ML-QZS meta-structure is constructed.Fourth,the dynamic modeling of the ML-QZS vibration isolation metastructure is conducted,and the dynamic responses are obtained from the equations of motion,and verified by finite element(FE)simulations.Finally,a prototype of the ML-QZS vibration isolation meta-structure is fabricated by additive manufacturing,and the vibration isolation performance is evaluated experimentally.The results show that the vibration isolation performance substantially enhances when the number of unit cells increases.More importantly,the ML-QZS meta-structure can be easily extended in the direction of vibration isolation when the unit cells are properly stacked.Hence,the ML-FQZS vibration isolation meta-structure should be a fascinating solution for highly efficient vibration isolation performance at low frequency.

Dynamic analysis of a novel multilink-spring mechanism for vibration isolation and energy harvesting

Due to technical limitations,existing vibration isolation and energy harvesting(VIEH)devices have poor performance at low frequency.This paper proposes a new multilink-spring mechanism(MLSM)that can be used to solve this problem.The VIEH performance of the MLSM under harmonic excitation and Gaussian white noise was analyzed.It was found that the MLSM has good vibration isolation performance for low-frequency isolation and the frequency band can be widened by adjusting parameters to achieve a higher energy harvesting power.By comparison with two special cases,the results show that the MLSM is basically the same as the other two oscillators in terms of vibration isolation but has better energy harvesting performance under multistable characteristics.The MLSM is expected to reduce the impact of vibration on high-precision sensitive equipment in some special sites such as subways and mines,and at the same time supply power to structural health monitoring devices.

A viscoelastic metamaterial beam for integrated vibration isolation and energy harvesting

Locally resonant metamaterials have low-frequency band gaps and the capability of converging vibratory energy in the band gaps at resonant cells.It has been demonstrated by several researchers that the dissipatioin of vibratory energy within the band gap can be improved by using viscoelastic materials.This paper designs an integrated viscoelastic metamaterial for energy harvesting and vibration isolation.The viscoelastic metamaterial is achieved by a viscoelastic beam periodically arrayed with spatial ball-pendulum nonlinear energy harvesters.The nonlinear resonator with an energy harvesting function is achieved by placing a free-rolling magnetic ball in a spherical cavity with an additional induction coil.The dynamic equations of viscoelastic metamaterials under transverse excitation are established,and the energy harvesting and vibration isolation characteristics within the dispersion relation of viscoelastic metamaterials are analyzed.The results show that the vibrations of the main body of the viscoelastic metamaterial beam are significantly suppressed in the frequency range of the local resonance band gap.At the same time,the elastic waves are limited in the nonlinear resonator with an energy harvesting function,which improves the energy output.Finally,an experimental platform of viscoelastic metamaterial vibration is established for validation purposes.

A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot

Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.However,it is difficult to obtain its precise dynamic model,because of the nonlinearity and uncertainty of the heavy robot.This paper presents a dynamic control framework with a decentralized structure for single wheel-leg,position tracking based on model predictive control(MPC)and adaptive impedance module from inside to outside.Through the Newton-Euler dynamic model of the Stewart mechanism,the controller first creates a predictive model by combining Newton-Raphson iteration of forward kinematic and inverse kinematic calculation of Stewart.The actuating force naturally enables each strut to stretch and retract,thereby realizing six degrees-of-freedom(6-DOFs)position-tracking for Stewart wheel-leg.The adaptive impedance control in the outermost loop adjusts environmental impedance parameters by current position and force feedback of wheel-leg along Z-axis.This adjustment allows the robot to adequately control the desired support force tracking,isolating the robot body from vibration that is generated from unknown terrain.The availability of the proposed control methodology on a physical prototype is demonstrated by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strips.By comparing the proportional and integral(PI)and constant impedance controllers,better performance of the proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder,as well as an inertial measurement unit(IMU)mounted on the robot body.The proposed algorithm structure significantly enhances the control accuracy and vibration isolation capacity of parallel wheel-legged robot.

Vibration Isolation Characteristics of Impedance-balanced Ship Equipment Foundation under Unbalanced Excitation

A new type of impedance-balanced ship equipment foundation structure based on the principle of impedance balancing using a“discontinuous panel-vibration isolation liquid layer-foundation structure”is proposed to solve the problem of poor low-frequency vibration isolation of the foundation under unbalanced excitation of shipboard equipment.Based on the finite element method,the influence of characteristic parameters of the foundation panel structure on its vibration reduction characteristics under unbalanced excitation is explored.The results show that the vibration isolation level of the impedance-balanced foundation is 10 dB higher than the traditional foundation in the low-frequency band of 10-500 Hz when subjected to combined excitation of concentrated force and moment.Increasing the thickness of the impedance-balanced foundation panel can enhance the isolation effect.Increasing the number of sub-panels can effectively reduce the vibration response of the foundation panel and enhance the isolation performance of the foundation.The connection stiffness between sub-panels has a small effect on the isolation performance of the foundation.

A state-of-the-art review on low-frequency nonlinear vibration isolation with electromagnetic mechanisms

Vibration isolation is one of the most efficient approaches to protecting host structures from harmful vibrations,especially in aerospace,mechanical,and architectural engineering,etc.Traditional linear vibration isolation is hard to meet the requirements of the loading capacity and isolation band simultaneously,which limits further engineering application,especially in the low-frequency range.In recent twenty years,the nonlinear vibration isolation technology has been widely investigated to broaden the vibration isolation band by exploiting beneficial nonlinearities.One of the most widely studied objects is the"three-spring"configured quasi-zero-stiffness(QZS)vibration isolator,which can realize the negative stiffness and high-static-low-dynamic stiffness(HSLDS)characteristics.The nonlinear vibration isolation with QZS can overcome the drawbacks of the linear one to achieve a better broadband vibration isolation performance.Due to the characteristics of fast response,strong stroke,nonlinearities,easy control,and low-cost,the nonlinear vibration with electromagnetic mechanisms has attracted attention.In this review,we focus on the basic theory,design methodology,nonlinear damping mechanism,and active control of electromagnetic QZS vibration isolators.Furthermore,we provide perspectives for further studies with electromagnetic devices to realize high-efficiency vibration isolation.

Study on the Impediment to Vibration Wave Propagation from Rigid Vibration Isolation Mass

Based on the principle of impedance mismatching,the performance of rigid vibration isolation mass in impeding vibration wave propagation was discussed from the perspective of wave approach.Based on FEM,the influence of its weight as well as the cross-section shape parameters on the isolation performance of rigid vibration isolation mass was studied through numerical simulation.The results show that rigid vibration isolation mass can effectively impede the propagation of the medium and high frequency vibration waves,and the heavier the vibration isolation mass,the better the isolation performance.For low frequency waves,the vibration isolation effect is not so obvious;for a rectangular vibration isolation mass,the isolation performance could be effectively improved by increasing the cross-section height and reducing the cross-section width.A useful reference was provided for the application of rigid vibration isolation masses to the vibration isolation and noise reduction of ship structure.

A hybrid multi-degree-of-freedom vibration isolation platform for spacecrafts by the linear active disturbance rejection control

The hybrid vibration isolation, which takes advantages of both the passive and active approaches, has been an important solution for space missions. The objective of this paper is to design a vibration isolation platform for payloads on spacecrafts with the robust, wide bandwidth, and multi-degree-of-freedom(MDOF). The proposed solution is based on a parallel mechanism with six voice-coil motors(VCMs) as the actuators. The linear active disturbance resistance control(LADRC) algorithm is used for the active control. Numerical simulation results show that the vibration isolation platform performs effectively over a wide bandwidth, and the resonance introduced by the passive isolation is eliminated. The system robustness to the uncertainties of the structure is also verified by simulation.

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

Low-fi＇equency vertical vibration isolation systems play important roles in precision measurements to reduce seismic and environmental vibration noise. Several types of active vibration isolation systems have been developed. However, few researches focus on how to optimize the test mass install position in order to improve the vibration transmissibility. An active low-frequency vertical vibration isolation system based on an earlier instrument, the Super Spring, is designed and implemented. The system, which is simple and compact, consists of two stages： a parallelogram-shaped linkage to ensure vertical motion, and a simple spring-mass system. The theoretical analysis of the vibration isolation system is presented, including terms erroneously ignored before. By carefully choosing the mechanical parameters according to the above analysis and using feedback control, the resonance frequency of the system is reduced from 2.3 to 0.03 Hz, a reduction by a factor of more than 75. The vibration isolation system is installed as an inertial reference in an absolute gravimeter, where it improved the scatter of the absolute gravity values by a factor of 5. The experimental results verifies the improved performance of the isolation system, making it particularly suitable for precision experiments. The improved vertical vibration isolation system can be used as a prototype for designing high-performance active vertical isolation systems. An improved theoretical model of this active vibration isolation system with beam-pivot configuration is proposed, providing fundamental guidelines for vibration isolator design and assembling.

Self-synchronization theory of dual motor driven vibration system with two-stage vibration isolation frame

This paper studies self-synchronization and stability of a dual-motor driven vibration system with a two-stage vibration isolation frame. Oscillation amplitude of the material box large enough can be ensured on the vibration system in order to screen materials. Reduction of the dynamic load transmitted to the foundation can also be achieved for the vibration system. A Lagrange equation is used to set up the motion differential equations of the system, and a dimensionless coupled equation of the eccentric rotors is obtained using a method of modified average small parameter. According to the existence condition of zero solution in the dimensionless coupled equation of the eccentric rotors, the precondition for commencing self-synchronization motion is achieved.The stability condition of self-synchronization is obtained based on the Routh-Hurwitz criterion. The theoretical analysis is validated by simulations and experiments.

Active Vibration Isolation of Micro-Manufacturing Platform Based on Neural Network

The micromation and precision of the Micro-Electromechanical System demand that its manufacturing, measuring and assembling must work in a micro-manufacturing platform with good ability to isolate vibrations. This paper develops a vibration isolation system of micro-manufacturing platform. The brains of many kinds of birds can isolate vibrations well, such as woodpecker’s brain. When a woodpecker pecks the wood at the speed as 1.6 times as the velocity of sound, its brain will tolerate the wallop 1 500 times of the weight of itself without any damage. The isolation mechanics and organic texture of woodpecker’s brain that has good isolation characteristics were studied. A structure model of vibration isolation system for the micro-manufacturing platform is established based on the bionics of the bird’s brain vibration isolation mechanism. In order to isolate effectively the high frequency vibrations from the ground, a rubber layer is used to isolate vibrations passively between the micro-manufacturing platform’s pedestal and the ground. This layer corresponds to the cartilage and muscles in the outer meninges of the bird’s brain. The active vibration isolation technique is adopted to isolate vibrations between the micro-manufacturing platform and the pedestal. Air springs are used as elastic components, which correspond to the interspaces between the outer meninges and the encephala of the bird’s brain. Actuators are made of giant magnetostrictive material, and it corresponds to the nerves and neural muscles linking the meninges and the encephala. The actuators and air springs are arranged vertically in parallel to make use of the giant magnetostrictive actuators effectively. The air springs support almost all weight of the micro-manufacturing platform and the giant magnetostrictive actuators support almost no weight. In order to realize high performance to isolate complex micro-vibration, the control method using a three-layer neural network is presented. This vibration control system takes into account the floor disturbance and the direct disturbance acting on the micro-manufacturing platform. The absolute acceleration of the micro-manufacturing platform is used as the performance index of vibration control. The performance of the control system is tested by numerical simulation. Simulation results show that the active vibration isolation system has good isolation performance against the floor disturbance and the direct disturbance acting on the micro-manufacturing platform in all the frequency range.

Research and application on three-dimensional seismic and vibration isolation for building

This paper presents the study of a three-dimensional(3D) isolation system.Firstly,the authors investigated the effects of an innovative 3D isolator,which was composed of a connecting plate,a rubber pad for vibration isolation in the vertical direction and a horizontal rubber bearing for seismic isolation in both horizontal directions.Secondly,the authors designed such a vibration isolation system and installed it underneath two specific residential buildings which were built directly over an existing subway communication hub platform in Beijing.These buildings required good performance vibration and seismic isolation system to reduce the impact from the running of nearby subway trains.Finally,in situ tests were conducted for both the isolated and the non-isolated buildings for the purpose of comparison.The test results showed that the maximum acceleration response level of the isolated superstructure is reduced by 10% as compared to that of the platform.The maximum attenuation of vibration reaches up to 25 dB.The 3D system explored in this paper is very effective in control and suppression of building vibration induced by earthquakes or running of trains.

Dynamic Analysis and Decoupling Control of Octo-pneumatic Actuator Vibration Isolation Platform

Control of a six-DOF vibration isolation platform is generally difficult which is due to the strong coupling among its input and output channels. The dynamic behavior and decoupling approach of a six-DOF vibration isolation platform with eight pneumatic actuators are investigated. Owing to the symmetric configuration design of the platform, the coupling among different channels is greatly weakened. When the payload＇s principal axes of inertia parallel to the platform＇s axes of symmetry and the payload＇s center of mass is at the extension line of the platform＇s central axis, the motion can be decomposed into two independent single-input single-output channels and two independent two-input two-output subsystems. The second-order subsystems are decoupled further with the simultaneous matrix diagonalization. Thus a decoupling control strategy is developed. Effectiveness of the decoupling approach is verified through experiments of the platform, and the experimental results show that vibrations of the platform are attenuated obviously owing to the active control.

PERFORMANCE OF ULTRA-LOW FREQUENCY PASSIVE VERTICAL VIBRATION ISOLATION SYSTEM WITH REVERSE PENDULUM

A novel long period passive vertical vibration isolatorconstructed by mounting reverse pendu- lums on two pairs of torsionsprings is presented. By theoretical analysis and numericalcalculation, it is shown that the isolator can achieve much longerresonant period due to gravitational positive feedback and is smallerin size than the current torsion spring isolators with the samegeometric parameters.

Barrier Vibration Isolation to Work-Place Vibration and Its Influence on Uneven Subsidence of Pillar Foundation

Aiming at practice, the wave propagation in soil has been comprehensively studied on the basis of FEM analyzing model being established. An investigation has also been performed on how to solve the problems of simulating transient vibration in actual foundation with FEM, and the result of calculating to the real transient vibration of actual foundation with FEM software ANSYS agrees with that of measuring. The vibration variation in the ground and the uneven subsidence of the factory houses’ pillars, with and without barrier vibration isolation, are calculated by employing FEM. The results show that proper barrier isolation can diminish the ground vibration displacement but likely to magnify the dynamic stress and vibration frequency within a certain region, which would aggravate the uneven subsidence of the factory house pillars.

Bandgaps and vibration isolation of local resonance sandwich-like plate with simply supported overhanging beam

The concept of local resonance phononic crystals proposed in recent years provides a new chance for theoretical and technical breakthroughs in the structural vibration reduction.In this paper,a novel sandwich-like plate model with local resonator to acquire specific low-frequency bandgaps is proposed.The core layer of the present local resonator is composed by the simply supported overhanging beam,linear spring and mass block,and well connected with the upper and lower surface panels.The simply supported overhanging beam is free at right end,and an additional linear spring is added at the left end.The wave equation is established based on the Hamilton principle,and the bending wave bandgap is further obtained.The theoretical results are verified by the COMSOL finite element software.The bandgaps and vibration characteristics of the local resonance sandwich-like plate are studied in detail.The factors which could have effects on the bandgap characteristics,such as the structural damping,mass of vibrator,position of vibrator,bending stiffness of the beam,and the boundary conditions of the sandwich-like plates,are analyzed.The result shows that the stopband is determined by the natural frequency of the resonator,the mass ratio of the resonator,and the surface panel.It shows that the width of bandgap is greatly affected by the damping ratio of the resonator.Finally,it can also be found that the boundary conditions can affect the isolation efficiency.

The Influence of Blocking Mass Parameters on the Vibration Isolation Performance of a Power Cabin

Rigid blocking masses are located in the typical base structure of a power cabin based on the impedance mismatch principle.By combining the acoustic-structural coupling method and statistical energy analysis,the full-band vibration and sound radiation reduction effect of vibration isolation masses located in a base structure was researched.The influence of the blocking mass’ cross-section size and shape parameters and the layout location of the base isolation performance was discussed.Furthermore,the effectiveness of rigid vibration isolation design of the base structure was validated.The results show that the medium and high frequency vibration and sound radiation of a power cabin are effectively reduced by a blocking mass.Concerning weight increment and section requirement,suitably increasing the blocking mass size and section height and reducing section width can result in an efficiency-cost ratio.

Optimization Design of Vibration Characteristics of Ship Composite Brace with Rigid Vibration Isolation Mass

In considering the theory of structural dynamic optimization design, a design method of the structural style of ship composite brace with rigid vibration isolation mass was studied. Two kinds of structural dynamic optimization formulations minimizing the vibration acceleration of the non-pressure hull on the restraining condition of the gross weight of the ship cabin were established: 1) dynamic optimization of the sectional dimensions of the rigid vibration isolation mass in the composite brace; 2) dynamic optimization of the arranging position of the rigid vibration isolation mass. Through the optimization results, sectional dimensions and the arranging position of the rigid vibration isolation mass with better performance in reducing vibration were gained, and some reference was provided for practical engineering designs as well as enrichment of the design method of a novel ship vibration-isolation brace.

EQUIVALENT EXCITATION METHOD FOR VIBRATION ISOLATION DESIGN:THEORETICAL ANALYSIS AND EXPERIMENTAL RESULTS

In view of difficulties concerned with direct measurement of excitationsinside source equipments and their significant influence on vibration isolation effectiveness, adynamical model, for vibration isolation of a rigid machine with six-degree-of-freedom mounted on aflexible foundation through multiple mounts, is analyzed, in which the complicated and multipledisturbances inside the machine are described as an equivalent excitation spectrum. And a method forthe estimation of the equivalent excitation spectrum according to system dynamic responses isdiscussed for the quantitative prediction of isolation effectiveness. Both theoretical analysis andexperimental results are demonstrated. Further work shows the quantitative prediction of transmittedpower flow in a flexible vibration isolation experiment system using the proposed equivalentexcitation spectrum method, by comparison with its testing results.

Research on linear/nonlinear viscous damping and hysteretic damping in nonlinear vibration isolation systems

A nonlinear vibration isolation system is promising to provide a high-efficient broadband isolation performance.In this paper,a generalized vibration isolation system is established with nonlinear stiffness,nonlinear viscous damping,and Bouc-Wen(BW)hysteretic damping.An approximate analytical analysis is performed based on a harmonic balance method(HBM)and an alternating frequency/time(AFT)domain technique.To evaluate the damping effect,a generalized equivalent damping ratio is defined with the stiffness-varying characteristics.A comprehensive comparison of different kinds of damping is made through numerical simulations.It is found that the damping ratio of the linear damping is related to the stiffness-varying characteristics while the damping ratios of two kinds of nonlinear damping are related to the responding amplitudes.The linear damping,hysteretic damping,and nonlinear viscous damping are suitable for the small-amplitude,medium-amplitude,and large-amplitude conditions,respectively.The hysteretic damping has an extra advantage of broadband isolation.