The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI ca...The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI caused by past decoded bits and the ISI caused by future transmitting bits.However,the current technique is only capable of removing partial effects of the ISI,because only past decoded bits are available for the suboptimal decoding threshold calculation.The unavailability of the future information needed for the optimal decoding threshold is an obstacle to further improve the Bit Error Rate(BER)performance.In contrast to the previous method using Echo State Network(ESN)to predict one future bit,the proposed method in this paper predicts the optimal decoding threshold directly using ESN.The proposed ESN-based threshold prediction method simplifies the symbol decoding operation by avoiding the iterative prediction of the output waveform points using ESN and accumulated error caused by the iterative operation.With this approach,the calculation complexity is reduced compared to the previous ESN-based approach.The proposed method achieves better BER performance compared to the previous method.The reason for this superior result is twofold.First,the proposed ESN is capable of using more future symbols information conveyed by the ESN input to obtain more accurate threshold rather than the previous method in which only one future symbol was available.Second,the proposed method here does not need to estimate the channel information using Least Squared(LS)method,which avoids the extra error caused by inaccurate channel information estimation.Simulation results and experiment based on a wireless open-access research platform under a practical wireless channel show the effectiveness and superiority of the proposed method.展开更多
At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the...At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.展开更多
The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of...The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of service(QoS) in terms of delay,reliability and security.Furthermore,the 5G network shall also incorporate high mobility requirements as an integral part,providing satisfactory service to users travelling at a speed up to 500 km/h.This paper provides a survey of potential high mobility wireless communication(HMWC) techniques for 5G network.After discussing the typical requirements and challenges of HMWC,key techniques to cope with the challenges are reviewed,including transmission techniques under the fast timevarying channels,network architecture with mobility support,and mobility management.Finally,future research directions on 5G high mobility communications are given.展开更多
There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless ...There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless communication is a persistent research hot spot.Two-dimensional(2D)materials are the preferred choice as wireless communication and EM attenuation materials as they are lightweight with high aspect ratios and possess distinguished electronic properties.MXenes,as a novel family of 2D materials,have shown excellent properties in various fields,owing to their excellent electrical conductivity,mechanical stability,high flexibility,and ease of processability.To date,research on the utility of MXenes for wireless communication has been actively pursued.Moreover,MXenes have become the leading materials for EM attenuation.Herein,we systematically review the recent advances in MXene-based materials with different structural designs for wireless communication,electromagnetic interference(EMI)shielding,and EM wave absorption.The relationship governing the structural design and the effectiveness for wireless communication,EMI shielding,and EM wave absorption is clearly revealed.Furthermore,our review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research.展开更多
Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency....Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency.This paper proposes a closed-loop control wireless communication wireless power transfer system with a wearable four-coil structure to stabilize the receiving voltage fluctuation caused by changes in the displacement between the coils.Test results show that the system can provide stable receiving voltage,no matter how the distance between the transmitting coil and the receiving coil is changed.When the transmission distance is 20 mm,the power transfer efficiency of the system can reach 18.5%under the open-loop state,and the stimulus parameters such as the stimulation period and pulse width can be adjusted in real time through the personal computer terminal.展开更多
To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Netw...To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Network) is proposed. The sparse mobile devices, assisted with the solar-powered multi-functional standing stations mainly on networking maintenance and routing arrangement, self-organize into a MANET. The topology of the standing stations is designed for networking robust and to simplify the routing method and energy strategy. Then in the OMNe T++(Objective Modular Network Test bed in C++) simulation, the energy consumption is analysis while adjusting routing with the different energy status of the standing stations. The result shows that the standing stations should adjust routing as well as control the mobile devices' activity level according to the energy states of the standing stations and their adjacent mobile devices.展开更多
The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it ...The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it guarantees safety and security which are critical in radio and microwave frequency communication.The principal objective of this paper is to analyze the indoor OWC systems on these guaranteed features,and safety and security are jointly denoted by the term green.The high obstacle impermeability of optical signals and their directivity strengthen the security of indoor OWC data transmission.The confidentiality and authenticity of optical wireless data can also be preserved with the Quantum Key Distribution(QKD).This paper provides a technological overview and a review of literature about the OWC system that helps to identify the challenges in the path of a ubiquitous deployment of green wireless communication systems.Significant advancements in the sources and detectors are discussed together with the coding,modulation and multiplexing techniques for making highly robust OWC links.The ubiquitous deployment of green OWC necessitates the development of optical transmitters and receivers,performance enhancement techniques,incorporation of uplink and energy harvesting abilities,and safety and security enhancement techniques.Hence,a special emphasis is placed on these aspects and their challenges towards the green implementation.Furthermore,the paper explores some significant indoor applications based on the OWC that have great impacts on the Next Generation Networks(NGN)and the Internet of Things(IoT).展开更多
The high-speed railway and high-way networks are now expanding at a phenomenal speed in Chinaand in many other parts of the world. The related broadband wireless communication over high-speed trains and highway vehicl...The high-speed railway and high-way networks are now expanding at a phenomenal speed in Chinaand in many other parts of the world. The related broadband wireless communication over high-speed trains and highway vehicles is a very challenging task due to hostile transmission channel conditions. The demand for such services is growing rapidly, following the proliferation of laptop/tablet computers and smart phones. This motivates the research on wireless communications in the high mobility environments.展开更多
As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical def...As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical deformations;thus,their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive.Here,a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability.The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting,whereas the rapid changing resonance frequency with deformations allows for wireless sensing.The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter(input power of−3 dBm)efficiently(i.e.,the receiving power higher than−100 dBm over a distance of 100 m)on human bodies even upon 25%stretching.The flexibility in structural engineering combined with the coupled mechanical-electromagnetic simulations,provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics.展开更多
Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques o...Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques or cryptographic methods are carried out.This paper proposes a new index parameter named as eavesdropping area,to evaluate the anti-eavesdropping performance of wireless system.Given the locations of legitimate transmitter and receiver,eavesdropping area index describes the total area of eavesdropping regions where messages can be wiretapped in the whole evaluating region.This paper gives detailed explanations about its concept and deduces mathematical formulas about performance curves based on region classification.Corresponding key system parameters are analyzed,including the characteristics of eavesdropping region,transmitted beam pattern,beam direction,receiver sensitivity,eavesdropping sensitivity,path loss exponent and so on.The proposed index can give an insight on the confirmation of high-risk eavesdropping region and formulating optimal transmitting scheme for the confidential communications to decrease the eavesdropping probability.展开更多
Secret key generation(SKG)is an emerging technology to secure wireless communication from attackers.Therefore,the SKG at the physical layer is an alternate solution over traditional cryptographic methods due to wirele...Secret key generation(SKG)is an emerging technology to secure wireless communication from attackers.Therefore,the SKG at the physical layer is an alternate solution over traditional cryptographic methods due to wireless channels’uncertainty.However,the physical layer secret key generation(PHY-SKG)depends on two fundamental parameters,i.e.,coherence time and power allocation.The coherence time for PHY-SKG is not applicable to secure wireless channels.This is because coherence time is for a certain period of time.Thus,legitimate users generate the secret keys(SKs)with a shorter key length in size.Hence,an attacker can quickly get information about the SKs.Consequently,the attacker can easily get valuable information from authentic users.Therefore,we considered the scheme of power allocation to enhance the secret key generation rate(SKGR)between legitimate users.Hence,we propose an alternative method,i.e.,a power allocation,to improve the SKGR.Our results show 72%higher SKGR in bits/sec by increasing power transmission.In addition,the power transmission is based on two important parameters,i.e.,epsilon and power loss factor,as given in power transmission equations.We found out that a higher value of epsilon impacts power transmission and subsequently impacts the SKGR.The SKGR is approximately 40.7%greater at 250 from 50 mW at epsilon=1.The value of SKGR is reduced to 18.5%at 250 mW when epsilonis 0.5.Furthermore,the transmission power is also measured against the different power loss factor values,i.e.,3.5,3,and 2.5,respectively,at epsilon=0.5.Hence,it is concluded that the value of epsilon and power loss factor impacts power transmission and,consequently,impacts the SKGR.展开更多
Advanced technologies are required in future mobile wireless networks to support services with highly diverse requirements in terms of high data rate and reliability,low latency,and massive access.Deep Learning(DL),on...Advanced technologies are required in future mobile wireless networks to support services with highly diverse requirements in terms of high data rate and reliability,low latency,and massive access.Deep Learning(DL),one of the most exciting developments in machine learning and big data,has recently shown great potential in the study of wireless communications.In this article,we provide a literature review on the applications of DL in the physical layer.First,we analyze the limitations of existing signal processing techniques in terms of model accuracy,global optimality,and computational scalability.Next,we provide a brief review of classical DL frameworks.Subsequently,we discuss recent DL-based physical layer technologies,including both DL-based signal processing modules and end-to-end systems.Deep neural networks are used to replace a single or several conventional functional modules,whereas the objective of the latter is to replace the entire transceiver structure.Lastly,we discuss the open issues and research directions of the DL-based physical layer in terms of model complexity,data quality,data representation,and algorithm reliability.展开更多
Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as ...Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as a promising trend.Firstly,we present historical development and convergence technology concept for communication-radar systems,and highlight some emerging technologies in this area.We then provide an updated and comprehensive survey of several converged systems operating in different microwave and millimeter frequency bands,by providing some selective typical communication and radar sensing systems.In this part,we also summarize and compare the system performance in terms of maximum range/range resolution for radar mode and Bit Error Rate(BER)/wireless distance for communication mode.In the last section,the convergence of millimeter/terahertz communication-radar system is concluded by analyzing the prospect of millimeter-wave/terahertz technologies in providing ultrafast data rates and high resolution for our smart future.展开更多
In industrial wireless scenarios,the impulsive noise(IN)incurred by machine running or operation causes a serious influence on the powerlimited industrial wireless communications.It is challenging to ensure efficient ...In industrial wireless scenarios,the impulsive noise(IN)incurred by machine running or operation causes a serious influence on the powerlimited industrial wireless communications.It is challenging to ensure efficient and reliable transmission with quality of service(QoS)guarantee for machinetype communication devices(MTCDs).Considering the IN in the industrial process,this paper establishes the multiuser multiple-input single-output(MU-MISO)orthogonal frequency division multiplexing(OFDM)system model,which combines transmitter and receiver design.Two precoding schemes are designed to improve communication effectiveness at the transmitter.More specifically,the precoder design scheme which combines semi-definite relaxation(SDR)with difference-of-two-convex-function(D.C.)iterative algorithm,is developed by utilizing the Dinkelbach method to improve the system effectiveness.To decrease the computational complexity,we devise the quadratic-based fractional programming(QFP)algorithm,which decouples the variables by using a quadratic transform method.On this basis,the IN mitigation scheme is studied to reduce the system error rate(SER)at the receiver.With the goal of improving the reliability of industrial wireless communications,we propose a hybrid nonlinear IN mitigation(HNINM)scheme and then derive its closed-form expression of SER.The simulation results show that the proposed QFP algorithm achieves superior performance while the HNINM scheme decreases the SER of industrial wireless communications.展开更多
With the rapid deployment of Next-Generation Networks(NGN),the research community has initiated discussions on an entirely new suite of optical enabling techniques.To pave the way for the development of future wireles...With the rapid deployment of Next-Generation Networks(NGN),the research community has initiated discussions on an entirely new suite of optical enabling techniques.To pave the way for the development of future wireless networks,this article aims to unify the existing infrared,visible light,and ultraviolet subbands while also exploring the potential of the Petahertz(PHz)band to support extremely bandwidth-thirsfy telepresence style applications.Our focus is on the emerging Petahertz Communication(PetaCom)framework,scenario-dependent propagation channels,modulation schemes,system performance,multiple access techniques,and networking.We conclude with a range of PetaCom challenges and open research issues.展开更多
Terahertz(THz)wireless communication has the capability to connect massive devices using its ultra-large spectrum resource.We propose a hybrid precoding scheme for the cluster-based multi-carrier beam division multipl...Terahertz(THz)wireless communication has the capability to connect massive devices using its ultra-large spectrum resource.We propose a hybrid precoding scheme for the cluster-based multi-carrier beam division multiple access(MC-BDMA)to enable THz massive connections.Both the inter-beam interference and inter-band power leakage in this system are considered.A mathematical model is established to analyze and reduce their effects on the THz signal transmission.By considering the peculiarities of THz channels and characteristics of THz hardware components,we further propose a three-step hybrid precoding algorithm with low complexity,where the received signal power enhancement,the inter-beam interference elimination,and the inter-band power leakage suppression are conducted in succession.Simulation results are presented to demonstrate the high spectrum efficiency and high energy efficiency of our proposed algorithm,especially in the massive-connection scenarios.展开更多
The development of science and technology is the key to changing human life and promoting social and economic development.As a product of technological development,the widespread application of communication technolog...The development of science and technology is the key to changing human life and promoting social and economic development.As a product of technological development,the widespread application of communication technology has brought a brand new“dawn”to the development of human society.5G wireless communication technology is an advanced wireless communication technology that has recently developed.With the advantages of low energy consumption and high network speed,5G technology has shown very bright development prospects in various fields today.Government,operators and equipment providers are actively promoting and deploying 5G technology,and all links in the industry chain are mature.It is expected that the future market size will reach 17 trillion,especially in today’s industrial field,the application of 5G technology will further enhance work efficiency,ensure work quality,and promote good development in the industrial field.Based on this,this paper will study the development of 5G wireless technology in the industrial field,so as to provide corresponding reference for the good application of 5G technology in the industrial field.展开更多
Data-driven paradigms are well-known and salient demands of future wireless communication. Empowered by big data and machine learning techniques,next-generation data-driven communication systems will be intelligent wi...Data-driven paradigms are well-known and salient demands of future wireless communication. Empowered by big data and machine learning techniques,next-generation data-driven communication systems will be intelligent with unique characteristics of expressiveness, scalability, interpretability, and uncertainty awareness, which can confidently involve diversified latent demands and personalized services in the foreseeable future. In this paper, we review a promising family of nonparametric Bayesian machine learning models,i.e., Gaussian processes(GPs), and their applications in wireless communication. Since GP models demonstrate outstanding expressive and interpretable learning ability with uncertainty, they are particularly suitable for wireless communication. Moreover, they provide a natural framework for collaborating data and empirical models(DEM). Specifically, we first envision three-level motivations of data-driven wireless communication using GP models. Then, we present the background of the GPs in terms of covariance structure and model inference. The expressiveness of the GP model using various interpretable kernels, including stationary, non-stationary, deep and multi-task kernels,is showcased. Furthermore, we review the distributed GP models with promising scalability, which is suitable for applications in wireless networks with a large number of distributed edge devices. Finally, we list representative solutions and promising techniques that adopt GP models in various wireless communication applications.展开更多
As the competition for marine resources is increasingly fierce,the security of underwater acoustic communication has attracted a great deal of attention.The information and location of the communicating platform can b...As the competition for marine resources is increasingly fierce,the security of underwater acoustic communication has attracted a great deal of attention.The information and location of the communicating platform can be leaked during the traditional underwater acoustic communication technology.According to the unique advantages of chaos communication,we put forward a novel communication scheme using complex parameter modulation and the complex Lorenz system.Firstly,we design a feedback controller and parameter update laws in a complex-variable form with rigorous mathematical proofs(while many previous references on the real-variable form were only special cases in which the imaginary part was zero),which can be realized in practical engineering;then we design a new communication scheme employing parameter modulation.The main parameter spaces of the complex Lorenz system are discussed,then they are adopted in our communication scheme.We also find that there exist parametric attractors in the complex Lorenz system.We make numerical simulations in two channels for digital signals and the simulations verify our conclusions.展开更多
This research investigates a monopole patch antenna for Wi-Fi applications at 2.45 and 5.2 GHz,and WiMax at 3.5 GHz.A low-cost and flexible graphite sheet with good conductivity,base on graphite conductive powder and ...This research investigates a monopole patch antenna for Wi-Fi applications at 2.45 and 5.2 GHz,and WiMax at 3.5 GHz.A low-cost and flexible graphite sheet with good conductivity,base on graphite conductive powder and glue is used to create a radiator patch and ground plane.Instead of commercially available conductive inks or graphite sheets,we use our selfproduced graphite liquid to create the graphite sheet because it is easy to produce and inexpensive.The antenna structure is formed using a low-cost and easy hand-screen printing approach that involved placing graphite liquid on a bendable polyester substrate.This research focuses on designing and developing a low-cost,thin,light,and flexible patch antenna for wireless communication and smart glass applications.The proposed antenna utilizes CST microwave software for simulations to improve the parameters before fabrication and measurement.The simulation and measurement results for the reflection coefficients at 2.45 GHz,3.5 GHz,and 5.20 GHz are reliable and cover the required resonance frequencies,antennas gain are 1.91,1.98,and 1.87 dB,respectively.Additionally,the radiation patterns of both results are omnidirectional.In the experiments,bending the proposed patch antenna along with the cylinder with the radii of 60,40,and 25 mm yielded the same measurement results as the unbent patch antenna.展开更多
文摘The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI caused by past decoded bits and the ISI caused by future transmitting bits.However,the current technique is only capable of removing partial effects of the ISI,because only past decoded bits are available for the suboptimal decoding threshold calculation.The unavailability of the future information needed for the optimal decoding threshold is an obstacle to further improve the Bit Error Rate(BER)performance.In contrast to the previous method using Echo State Network(ESN)to predict one future bit,the proposed method in this paper predicts the optimal decoding threshold directly using ESN.The proposed ESN-based threshold prediction method simplifies the symbol decoding operation by avoiding the iterative prediction of the output waveform points using ESN and accumulated error caused by the iterative operation.With this approach,the calculation complexity is reduced compared to the previous ESN-based approach.The proposed method achieves better BER performance compared to the previous method.The reason for this superior result is twofold.First,the proposed ESN is capable of using more future symbols information conveyed by the ESN input to obtain more accurate threshold rather than the previous method in which only one future symbol was available.Second,the proposed method here does not need to estimate the channel information using Least Squared(LS)method,which avoids the extra error caused by inaccurate channel information estimation.Simulation results and experiment based on a wireless open-access research platform under a practical wireless channel show the effectiveness and superiority of the proposed method.
文摘At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.
基金supported by the National Basic Research Program of China (973 Program No.2012CB316100)
文摘The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of service(QoS) in terms of delay,reliability and security.Furthermore,the 5G network shall also incorporate high mobility requirements as an integral part,providing satisfactory service to users travelling at a speed up to 500 km/h.This paper provides a survey of potential high mobility wireless communication(HMWC) techniques for 5G network.After discussing the typical requirements and challenges of HMWC,key techniques to cope with the challenges are reviewed,including transmission techniques under the fast timevarying channels,network architecture with mobility support,and mobility management.Finally,future research directions on 5G high mobility communications are given.
基金National Natural Science Foundation of China(Nos.11774027,51132002,51977009 and 51372282).
文摘There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless communication is a persistent research hot spot.Two-dimensional(2D)materials are the preferred choice as wireless communication and EM attenuation materials as they are lightweight with high aspect ratios and possess distinguished electronic properties.MXenes,as a novel family of 2D materials,have shown excellent properties in various fields,owing to their excellent electrical conductivity,mechanical stability,high flexibility,and ease of processability.To date,research on the utility of MXenes for wireless communication has been actively pursued.Moreover,MXenes have become the leading materials for EM attenuation.Herein,we systematically review the recent advances in MXene-based materials with different structural designs for wireless communication,electromagnetic interference(EMI)shielding,and EM wave absorption.The relationship governing the structural design and the effectiveness for wireless communication,EMI shielding,and EM wave absorption is clearly revealed.Furthermore,our review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research.
基金supported by the National Natural Science Foundation of China(61674049,U19A2053)State Key Lab of ASIC and System(2019KF003)the Fundamental Research Funds for Central Universities(JZ2019HGTB0092)。
文摘Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency.This paper proposes a closed-loop control wireless communication wireless power transfer system with a wearable four-coil structure to stabilize the receiving voltage fluctuation caused by changes in the displacement between the coils.Test results show that the system can provide stable receiving voltage,no matter how the distance between the transmitting coil and the receiving coil is changed.When the transmission distance is 20 mm,the power transfer efficiency of the system can reach 18.5%under the open-loop state,and the stimulus parameters such as the stimulation period and pulse width can be adjusted in real time through the personal computer terminal.
基金supported by the Key Project of Chinese Ministry of Education(No.212168)
文摘To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Network) is proposed. The sparse mobile devices, assisted with the solar-powered multi-functional standing stations mainly on networking maintenance and routing arrangement, self-organize into a MANET. The topology of the standing stations is designed for networking robust and to simplify the routing method and energy strategy. Then in the OMNe T++(Objective Modular Network Test bed in C++) simulation, the energy consumption is analysis while adjusting routing with the different energy status of the standing stations. The result shows that the standing stations should adjust routing as well as control the mobile devices' activity level according to the energy states of the standing stations and their adjacent mobile devices.
基金This publication is an outcome of the R&D work undertaken project under the Visvesvaraya PhD Scheme(Grant No.Ph.D-MLA/4(16))of Ministry of Electronics&Information Technology,Government of India,being implemented by Digital India Corporation.
文摘The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it guarantees safety and security which are critical in radio and microwave frequency communication.The principal objective of this paper is to analyze the indoor OWC systems on these guaranteed features,and safety and security are jointly denoted by the term green.The high obstacle impermeability of optical signals and their directivity strengthen the security of indoor OWC data transmission.The confidentiality and authenticity of optical wireless data can also be preserved with the Quantum Key Distribution(QKD).This paper provides a technological overview and a review of literature about the OWC system that helps to identify the challenges in the path of a ubiquitous deployment of green wireless communication systems.Significant advancements in the sources and detectors are discussed together with the coding,modulation and multiplexing techniques for making highly robust OWC links.The ubiquitous deployment of green OWC necessitates the development of optical transmitters and receivers,performance enhancement techniques,incorporation of uplink and energy harvesting abilities,and safety and security enhancement techniques.Hence,a special emphasis is placed on these aspects and their challenges towards the green implementation.Furthermore,the paper explores some significant indoor applications based on the OWC that have great impacts on the Next Generation Networks(NGN)and the Internet of Things(IoT).
基金supported by the Major State Basic Research Development Program of China(973 Program No.2012CB316100)the National Natural Science Foundation of China(NSFC No.61032002)the Innovative Intelligence Base Project(111 Project No.111-2-14)
文摘The high-speed railway and high-way networks are now expanding at a phenomenal speed in Chinaand in many other parts of the world. The related broadband wireless communication over high-speed trains and highway vehicles is a very challenging task due to hostile transmission channel conditions. The demand for such services is growing rapidly, following the proliferation of laptop/tablet computers and smart phones. This motivates the research on wireless communications in the high mobility environments.
基金This work was in part supported by the International Partnership Program of Chinese Academy of Science(Grant No.154232KYSB20200016)the Suzhou Science and Technology Support Project(Grant No.SYG201905)+2 种基金the National Key Research and Development Program of China(Grant No.2020YFC2007400)H.C.acknowledges the supports provided by the National Science Foundation(NSF)(Grant No.ECCS-1933072)the National Heart,Lung,And Blood Institute of the National Institutes of Health under Award Number R61HL154215,and Penn State University.The partial support from the Center for Biodevices,the College of Engineering,and the Center for Security Research and Education at Penn State is also acknowledged.
文摘As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical deformations;thus,their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive.Here,a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability.The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting,whereas the rapid changing resonance frequency with deformations allows for wireless sensing.The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter(input power of−3 dBm)efficiently(i.e.,the receiving power higher than−100 dBm over a distance of 100 m)on human bodies even upon 25%stretching.The flexibility in structural engineering combined with the coupled mechanical-electromagnetic simulations,provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics.
文摘Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques or cryptographic methods are carried out.This paper proposes a new index parameter named as eavesdropping area,to evaluate the anti-eavesdropping performance of wireless system.Given the locations of legitimate transmitter and receiver,eavesdropping area index describes the total area of eavesdropping regions where messages can be wiretapped in the whole evaluating region.This paper gives detailed explanations about its concept and deduces mathematical formulas about performance curves based on region classification.Corresponding key system parameters are analyzed,including the characteristics of eavesdropping region,transmitted beam pattern,beam direction,receiver sensitivity,eavesdropping sensitivity,path loss exponent and so on.The proposed index can give an insight on the confirmation of high-risk eavesdropping region and formulating optimal transmitting scheme for the confidential communications to decrease the eavesdropping probability.
基金supported by the China National Key R&D Program(No.2018YFB0803600)Natural Science Foundation of China(No.61801008)+3 种基金Scientific Research Common Program of Beijing Municipal Education Commission(No.KM201910005025)the Chinese Postdoctoral Science Foundation(No.2020M670074)Key Project of Hunan Provincial,Department of Education(No.26420A205)The Construct Program of Applied Characteristics Discipline in Hunan University of Science and Engineering.
文摘Secret key generation(SKG)is an emerging technology to secure wireless communication from attackers.Therefore,the SKG at the physical layer is an alternate solution over traditional cryptographic methods due to wireless channels’uncertainty.However,the physical layer secret key generation(PHY-SKG)depends on two fundamental parameters,i.e.,coherence time and power allocation.The coherence time for PHY-SKG is not applicable to secure wireless channels.This is because coherence time is for a certain period of time.Thus,legitimate users generate the secret keys(SKs)with a shorter key length in size.Hence,an attacker can quickly get information about the SKs.Consequently,the attacker can easily get valuable information from authentic users.Therefore,we considered the scheme of power allocation to enhance the secret key generation rate(SKGR)between legitimate users.Hence,we propose an alternative method,i.e.,a power allocation,to improve the SKGR.Our results show 72%higher SKGR in bits/sec by increasing power transmission.In addition,the power transmission is based on two important parameters,i.e.,epsilon and power loss factor,as given in power transmission equations.We found out that a higher value of epsilon impacts power transmission and subsequently impacts the SKGR.The SKGR is approximately 40.7%greater at 250 from 50 mW at epsilon=1.The value of SKGR is reduced to 18.5%at 250 mW when epsilonis 0.5.Furthermore,the transmission power is also measured against the different power loss factor values,i.e.,3.5,3,and 2.5,respectively,at epsilon=0.5.Hence,it is concluded that the value of epsilon and power loss factor impacts power transmission and,consequently,impacts the SKGR.
基金supported by the National Natural Science Foundation of China under Grants 61801208,61931023,and U1936202.
文摘Advanced technologies are required in future mobile wireless networks to support services with highly diverse requirements in terms of high data rate and reliability,low latency,and massive access.Deep Learning(DL),one of the most exciting developments in machine learning and big data,has recently shown great potential in the study of wireless communications.In this article,we provide a literature review on the applications of DL in the physical layer.First,we analyze the limitations of existing signal processing techniques in terms of model accuracy,global optimality,and computational scalability.Next,we provide a brief review of classical DL frameworks.Subsequently,we discuss recent DL-based physical layer technologies,including both DL-based signal processing modules and end-to-end systems.Deep neural networks are used to replace a single or several conventional functional modules,whereas the objective of the latter is to replace the entire transceiver structure.Lastly,we discuss the open issues and research directions of the DL-based physical layer in terms of model complexity,data quality,data representation,and algorithm reliability.
基金supported in part by National Natural Science Foundation of China(NSFC)under Grant No.61771424in part by Natural Science Foundation of Zhejiang Province under Grant No.LZ18F010001.
文摘Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as a promising trend.Firstly,we present historical development and convergence technology concept for communication-radar systems,and highlight some emerging technologies in this area.We then provide an updated and comprehensive survey of several converged systems operating in different microwave and millimeter frequency bands,by providing some selective typical communication and radar sensing systems.In this part,we also summarize and compare the system performance in terms of maximum range/range resolution for radar mode and Bit Error Rate(BER)/wireless distance for communication mode.In the last section,the convergence of millimeter/terahertz communication-radar system is concluded by analyzing the prospect of millimeter-wave/terahertz technologies in providing ultrafast data rates and high resolution for our smart future.
基金supported in part by the National Natural Science Foundation of China under Grant 62071472in part the Program for“Industrial Io T and Emergency Collaboration”Innovative Research Team in CUMT(No.2020ZY002)。
文摘In industrial wireless scenarios,the impulsive noise(IN)incurred by machine running or operation causes a serious influence on the powerlimited industrial wireless communications.It is challenging to ensure efficient and reliable transmission with quality of service(QoS)guarantee for machinetype communication devices(MTCDs).Considering the IN in the industrial process,this paper establishes the multiuser multiple-input single-output(MU-MISO)orthogonal frequency division multiplexing(OFDM)system model,which combines transmitter and receiver design.Two precoding schemes are designed to improve communication effectiveness at the transmitter.More specifically,the precoder design scheme which combines semi-definite relaxation(SDR)with difference-of-two-convex-function(D.C.)iterative algorithm,is developed by utilizing the Dinkelbach method to improve the system effectiveness.To decrease the computational complexity,we devise the quadratic-based fractional programming(QFP)algorithm,which decouples the variables by using a quadratic transform method.On this basis,the IN mitigation scheme is studied to reduce the system error rate(SER)at the receiver.With the goal of improving the reliability of industrial wireless communications,we propose a hybrid nonlinear IN mitigation(HNINM)scheme and then derive its closed-form expression of SER.The simulation results show that the proposed QFP algorithm achieves superior performance while the HNINM scheme decreases the SER of industrial wireless communications.
基金supported by the Key Program of the National Natural Science Foundation of China(No.61631018),Key Research Program of Frontier Sciences of CAS(No.QYZDY-SSW-JSC003)Strategic Priority Research Program of CAS(No.XDA22000000).L.Hanzo would like to acknowledge the financial support of the Engineering and Physical Sciences Research Council projects EP/P034284/1 and EP/P003990/1(COALESCE)as well as of the European Research Council’s Advanced Fellow Grant QuantCom(Grant No.789028).
文摘With the rapid deployment of Next-Generation Networks(NGN),the research community has initiated discussions on an entirely new suite of optical enabling techniques.To pave the way for the development of future wireless networks,this article aims to unify the existing infrared,visible light,and ultraviolet subbands while also exploring the potential of the Petahertz(PHz)band to support extremely bandwidth-thirsfy telepresence style applications.Our focus is on the emerging Petahertz Communication(PetaCom)framework,scenario-dependent propagation channels,modulation schemes,system performance,multiple access techniques,and networking.We conclude with a range of PetaCom challenges and open research issues.
基金the National Natural Science Foundation of China under Grant No.61771054.
文摘Terahertz(THz)wireless communication has the capability to connect massive devices using its ultra-large spectrum resource.We propose a hybrid precoding scheme for the cluster-based multi-carrier beam division multiple access(MC-BDMA)to enable THz massive connections.Both the inter-beam interference and inter-band power leakage in this system are considered.A mathematical model is established to analyze and reduce their effects on the THz signal transmission.By considering the peculiarities of THz channels and characteristics of THz hardware components,we further propose a three-step hybrid precoding algorithm with low complexity,where the received signal power enhancement,the inter-beam interference elimination,and the inter-band power leakage suppression are conducted in succession.Simulation results are presented to demonstrate the high spectrum efficiency and high energy efficiency of our proposed algorithm,especially in the massive-connection scenarios.
文摘The development of science and technology is the key to changing human life and promoting social and economic development.As a product of technological development,the widespread application of communication technology has brought a brand new“dawn”to the development of human society.5G wireless communication technology is an advanced wireless communication technology that has recently developed.With the advantages of low energy consumption and high network speed,5G technology has shown very bright development prospects in various fields today.Government,operators and equipment providers are actively promoting and deploying 5G technology,and all links in the industry chain are mature.It is expected that the future market size will reach 17 trillion,especially in today’s industrial field,the application of 5G technology will further enhance work efficiency,ensure work quality,and promote good development in the industrial field.Based on this,this paper will study the development of 5G wireless technology in the industrial field,so as to provide corresponding reference for the good application of 5G technology in the industrial field.
基金supported in part by the National Key R&D Program of China with grant No. 2018YFB1800800by the Basic Research Project No. HZQB-KCZYZ-2021067 of Hetao Shenzhen-HK S&T Cooperation Zone+3 种基金by Natural Science Foundation of China (NSFC) with grants No. 92067202 and No. 62106212by Shenzhen Outstanding Talents Training Fund 202002by Guangdong Research Projects No. 2017ZT07X152 and No. 2019CX01X104by China Postdoctoral Science Foundation with grant No. 2020M671899。
文摘Data-driven paradigms are well-known and salient demands of future wireless communication. Empowered by big data and machine learning techniques,next-generation data-driven communication systems will be intelligent with unique characteristics of expressiveness, scalability, interpretability, and uncertainty awareness, which can confidently involve diversified latent demands and personalized services in the foreseeable future. In this paper, we review a promising family of nonparametric Bayesian machine learning models,i.e., Gaussian processes(GPs), and their applications in wireless communication. Since GP models demonstrate outstanding expressive and interpretable learning ability with uncertainty, they are particularly suitable for wireless communication. Moreover, they provide a natural framework for collaborating data and empirical models(DEM). Specifically, we first envision three-level motivations of data-driven wireless communication using GP models. Then, we present the background of the GPs in terms of covariance structure and model inference. The expressiveness of the GP model using various interpretable kernels, including stationary, non-stationary, deep and multi-task kernels,is showcased. Furthermore, we review the distributed GP models with promising scalability, which is suitable for applications in wireless networks with a large number of distributed edge devices. Finally, we list representative solutions and promising techniques that adopt GP models in various wireless communication applications.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U1806202,61773010,and 61903207)the International Collaborative Research Project of Qilu University of Technology(Grant No.QLUTGJHZ2018020)Major Scientific and Technological Innovation Projects of Shandong Province,China(Grant Nos.2019JZZY010731 and 2020CXGC010901).
文摘As the competition for marine resources is increasingly fierce,the security of underwater acoustic communication has attracted a great deal of attention.The information and location of the communicating platform can be leaked during the traditional underwater acoustic communication technology.According to the unique advantages of chaos communication,we put forward a novel communication scheme using complex parameter modulation and the complex Lorenz system.Firstly,we design a feedback controller and parameter update laws in a complex-variable form with rigorous mathematical proofs(while many previous references on the real-variable form were only special cases in which the imaginary part was zero),which can be realized in practical engineering;then we design a new communication scheme employing parameter modulation.The main parameter spaces of the complex Lorenz system are discussed,then they are adopted in our communication scheme.We also find that there exist parametric attractors in the complex Lorenz system.We make numerical simulations in two channels for digital signals and the simulations verify our conclusions.
基金This work was supported by the RMUTT research and development fund。
文摘This research investigates a monopole patch antenna for Wi-Fi applications at 2.45 and 5.2 GHz,and WiMax at 3.5 GHz.A low-cost and flexible graphite sheet with good conductivity,base on graphite conductive powder and glue is used to create a radiator patch and ground plane.Instead of commercially available conductive inks or graphite sheets,we use our selfproduced graphite liquid to create the graphite sheet because it is easy to produce and inexpensive.The antenna structure is formed using a low-cost and easy hand-screen printing approach that involved placing graphite liquid on a bendable polyester substrate.This research focuses on designing and developing a low-cost,thin,light,and flexible patch antenna for wireless communication and smart glass applications.The proposed antenna utilizes CST microwave software for simulations to improve the parameters before fabrication and measurement.The simulation and measurement results for the reflection coefficients at 2.45 GHz,3.5 GHz,and 5.20 GHz are reliable and cover the required resonance frequencies,antennas gain are 1.91,1.98,and 1.87 dB,respectively.Additionally,the radiation patterns of both results are omnidirectional.In the experiments,bending the proposed patch antenna along with the cylinder with the radii of 60,40,and 25 mm yielded the same measurement results as the unbent patch antenna.