Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) fr...Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) from nitrate medium was carried out using batch technique. Various parameters affecting the uptake of this metal ion were described in the previous paper (Belkhouche and Didi, 2010) and the capacity of the impregnated resin for bismuth(III) was found to be 490.7 mg/g of resin. Effect of temperature on the values of distribution equilibrium was studied to evaluate the changes in standard thermodynamic quantities. A comparison of Langmuir forms I, II and Freundlich sorption isotherms was realized and the kinetic models applied to the adsorption rate data were evaluated for Lagergren first order, the pseudo second order and Morris–Weber models. From the results, the adsorption of Bi(III) onto D2EHPA/XAD-1180 resin shown the exothermic character and followed the Langmuir form II isotherm. Thus, the capacity of monolayer adsorption of Bi(III) was equal to 769.23 mg/g of resin. Both the Lagergren pseudo first order and film-diffusion models were found to best describe the experimental rate data.展开更多
A membrane process for metal recovery from aqueous solutions was studied. Metal ions diffused from the feed compartment to the stripping compartment through an hybrid Donnan dialysis which consists to combine two ion ...A membrane process for metal recovery from aqueous solutions was studied. Metal ions diffused from the feed compartment to the stripping compartment through an hybrid Donnan dialysis which consists to combine two ion exchange membranes with solvent impregnated resin (SIR). The aim of this work is to study the recovery of Pb(II), Ag(I) and Cu(II) from nitrate solutions by using SIR combined with classical Donnan dialysis. The resin has been prepared by impregnating the Amberlite XAD-4 using three different extractants namely: di-2-ethyl hexyl phosphine acide (D2EHPA), tris-octyl phosphine oxide (TOPO) and Diphenylthiourea (DPT). Experiments were performed as a function of nature of the extractant impregnated on the XAD-4 resin as well as the concentration in the resin phase, the stripping pH, the concentration ratio of metal ions in the feed compartment and the nature of the counter ions in strip compartment. The results show that the D2EHPA is the better extractant for the metal ions used in this work, and it’s shown a good selectivity for the separation between ions.展开更多
以丙烯酸(AA)、丙烯酰胺(AM)、丙烯酸羟乙酯(HEMA)为单体、N,N′ 亚甲基双丙烯酰胺为交联剂、过硫酸铵/亚硫酸氢钠为氧化还原引发剂、Span80/Tween80为复合悬浮分散剂,采用反相悬浮聚合法合成了AA AM HEMA三元共聚高吸水性树脂。研究... 以丙烯酸(AA)、丙烯酰胺(AM)、丙烯酸羟乙酯(HEMA)为单体、N,N′ 亚甲基双丙烯酰胺为交联剂、过硫酸铵/亚硫酸氢钠为氧化还原引发剂、Span80/Tween80为复合悬浮分散剂,采用反相悬浮聚合法合成了AA AM HEMA三元共聚高吸水性树脂。研究了单体用量、分散剂用量、油水比和粒径等对树脂性能的影响。用TGA和DSC对树脂的保水性和脱水动力学进行了研究,IR分析证实所合成的树脂为丙烯酸-丙烯酰胺-丙烯酸羟乙酯三元共聚物。展开更多
文摘Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) from nitrate medium was carried out using batch technique. Various parameters affecting the uptake of this metal ion were described in the previous paper (Belkhouche and Didi, 2010) and the capacity of the impregnated resin for bismuth(III) was found to be 490.7 mg/g of resin. Effect of temperature on the values of distribution equilibrium was studied to evaluate the changes in standard thermodynamic quantities. A comparison of Langmuir forms I, II and Freundlich sorption isotherms was realized and the kinetic models applied to the adsorption rate data were evaluated for Lagergren first order, the pseudo second order and Morris–Weber models. From the results, the adsorption of Bi(III) onto D2EHPA/XAD-1180 resin shown the exothermic character and followed the Langmuir form II isotherm. Thus, the capacity of monolayer adsorption of Bi(III) was equal to 769.23 mg/g of resin. Both the Lagergren pseudo first order and film-diffusion models were found to best describe the experimental rate data.
文摘A membrane process for metal recovery from aqueous solutions was studied. Metal ions diffused from the feed compartment to the stripping compartment through an hybrid Donnan dialysis which consists to combine two ion exchange membranes with solvent impregnated resin (SIR). The aim of this work is to study the recovery of Pb(II), Ag(I) and Cu(II) from nitrate solutions by using SIR combined with classical Donnan dialysis. The resin has been prepared by impregnating the Amberlite XAD-4 using three different extractants namely: di-2-ethyl hexyl phosphine acide (D2EHPA), tris-octyl phosphine oxide (TOPO) and Diphenylthiourea (DPT). Experiments were performed as a function of nature of the extractant impregnated on the XAD-4 resin as well as the concentration in the resin phase, the stripping pH, the concentration ratio of metal ions in the feed compartment and the nature of the counter ions in strip compartment. The results show that the D2EHPA is the better extractant for the metal ions used in this work, and it’s shown a good selectivity for the separation between ions.
文摘 以丙烯酸(AA)、丙烯酰胺(AM)、丙烯酸羟乙酯(HEMA)为单体、N,N′ 亚甲基双丙烯酰胺为交联剂、过硫酸铵/亚硫酸氢钠为氧化还原引发剂、Span80/Tween80为复合悬浮分散剂,采用反相悬浮聚合法合成了AA AM HEMA三元共聚高吸水性树脂。研究了单体用量、分散剂用量、油水比和粒径等对树脂性能的影响。用TGA和DSC对树脂的保水性和脱水动力学进行了研究,IR分析证实所合成的树脂为丙烯酸-丙烯酰胺-丙烯酸羟乙酯三元共聚物。
