Synthesis of an IMF zeolite membrane for the separation of xylene isomer

The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for p-xylene from o-xylene molecules. Pure IMF-phase high-silica IM-5 zeolite seeds with uniform and fine crystal size were fabricated by a new sonication-assisted aging process. The seeds were coated on the support by dipcoating and induced the formation of continuous membrane. Separation performance in p-/o-xylene mixture was investigated at various temperature and pressure. The typical IM-5zeolite membrane had p-/o-xylene separation factor of 3.7. Our results suggest that IM-5 zeolite is a potentially good membrane material for the separation of xylene mixtures.

Enhanced xylene sensing performance of hierarchical flower-like Co_(3)O_(4) via In doping

Metal ions doping is a typical approach for tuning sensing properties of metal oxide semiconductors based gas sensors.Herein,hierarchical flower-like pure and In-doped Co_(3)O_(4) nanostructures assembled by porous two-dimensional(2D)nanosheets are synthesized via a solvothermal method and annealing process.The sensing measurements display that the In@Co_(3)O_(4)-4 based sensor possesses high response value of 55.9 toward 100 ppm xylene at 150 ℃,which is nearly 3.8times larger than that of pure Co_(3)O_(4) sensor.Furthermore,it possesses good selectivity and anti-humidity properties.Combined with the results of DFT calculations,the mechanism of enhanced gas sensing performance is analyzed systematically.

Bio-removal of mixture of benzene,toluene,ethylbenzene,and xylenes/total petroleum hydrocarbons/trichloroethylene from contaminated water

Four pure cultures were isolated from soil samples potentially contaminated with gasoline compounds either at a construction site near a gas station in Fai Chi Kei,Macao SAR or in the northern parts of China（Beijing,and Hebei and Shandong）.The effects of different concentrations of benzene,toluene,ethylbenzene,and three isomers（ortho-,meta-,and para-） of xylene（BTEX）,total petroleum hydrocarbons（TPH）,and trichloroethylene（TCE）,when they were present in mixtures,on the bio-removal effciencies of microbial isolates were investigated,together with their interactions during the bio-removal process.When the isolates were tested for the BTEX（50-350 mg/L）/TPH（2000 mg/L） mixture,BTEoX in BTEoX/TPH mixture was shown with higher bio-removal effciencies,while BTEmX in BTEmX/TPH mixture was shown with the lowest,regardless of isolates.The TPH in BTEmX/TPH mixture,on the other hand,were generally shown with higher bio-removal effciencies compared to when TPH mixed with BTEoX and BTEpX.When these BTEX mixtures（at 350 mg/L） were present with TCE（5-50 mg/L）,the stimulatory effect of TCE toward BTEoX bio-removal was observed for BTEoX/TCE mixture,while the inhibitory effect of TCE toward BTEmX for BTEmX/TCE mixture.The bio-removal effciency for TPH was shown lower in TPH（2000 mg/L）/TCE（5-50 mg/L） mixtures compared to TPH present alone,implying the inhibitory effect of TCE toward TPH bio-removal.For the mixture of BTEX（417 mg/L）,TPH（2000 mg/L） along with TCE（5- 50 mg/L）,TCE was shown co-metabolically removed more effciently at 15 mg/L,probably utilizing BTEX and/or TPH as primary substrates.

Occupational Health Risk Assessment of Benzene,Toluene,and Xylene in Shanghai

Objective This study was designed to conduct a retrospective and systematic occupational health risk assessment(OHRA)of enterprises that used benzene,toluene,and xylene(BTX)in Shanghai,China.Methods All data for the study were obtained from 1,705 occupational health examination and evaluation reports from 2013 to 2017,and a semiquantitative model following Chinese OHRA guidelines(GBZ/T 298-2017)was applied for the assessment.Results The selected enterprises using BTX were mainly involved in manufacturing of products.Using the exposure level method,health risk levels associated with exposure to BTX were classified as medium,negligible,or low.However,the risk levels associated with benzene and toluene were significantly different according to job types,with gluers and inkers exhibiting greater health risks.For the same job type,the health risk levels assessed using the comprehensive index method were higher than those using the exposure level method.Conclusion Our OHRA reveals that workers who are exposed to BTX still face excessive health risk.Additionally,the risk level varied depending on job categories and exposure to specific chemicals.Therefore,additional control measures recommended by OHRA guidelines are essential to reduce worker exposure levels.

Determination of hemoglobin adduct of a musk xylene metabolite in trout as biomarker of exposure by gas chromatography mass spectrometry

Musk xylene（MX） is frequently used as fragrances in formulation of personal care products. Quantification of a bound 4-amino- MX（4-AMX） as cysteine adducts in trout hemoglobin（Hb） was made by gas chromatography-ion trap-mass spectrometry（GC/MS）. The Hb samples were collected from trout after 24 h exposure to MX at 10μg/g, and or menhaden oil（control）. The formation of cysteine-Hb adduct was observed from nitroso derivative of MX, released by alkaline hydrolysis. The released 4-AMX metabolite was extracted in n- hexane. The extract was then reduced by evaporation, and analyzed by GC/MS. When similar agreement of mass spectral features and retention time of 4-AMX were obtained in both standard and sample solutions, the presence of 4-AMX metabolite in the Hb was confirmed. The concentration of 4-AMX was found to be 3.1 × 10^-6 6.9 × 10^-6 mg/g in the Hb solution. Quantitation was made based on an internal standard, a calibration plot, and response factor. In the non-hydrolyzed and laboratory blank extracts, the 4-AMX metabolite was not detected. Additionally, coeluting and interfefing ions were observed in the biological samples.

Successful Commercial Tests on Catalyst for Oxidation of Para-xylene

The Dalian Institute of Chemical Physics of CAS has made great strides in selective oxidation studies after having performed successful commercial testing of the novel catalyst for oxidation ofparaxylene in the 100 kt/a scale.

Synthesis of highly active Cu(Ⅰ)-Y(Ⅲ)-Y zeolite and its selective adsorption desulfurization performance in presence of xylene isomers

A bimetal-exchanged NaY zeolite(Cu(Ⅰ)-Y(Ⅲ)-Y)with a desirable adsorptive desulfurization(ADS)performance was prepared and characterized by means of X-ray diffraction,specific surface area measurements,X-ray fluorescence spectrometer,X-ray photoelectron spectroscopy,thermal gravity analysis and Fourier transform infrared spectroscopy.The effect of Y(Ⅲ)ions on ADS in the presence of the xylenes was investigated.Results indicated that the ADS performance of Y(Ⅲ)-Y is higher than that of most reported CeY.The Y(Ⅲ)-based Cu(Ⅰ)-Y(Ⅲ)-Y demonstrated the higher breakthrough loading than those of reported Ce(Ⅲ)/Ce(Ⅳ)-based transition metal Y zeolites,showing that Y(Ⅲ)ions play a promoting role in improving the ADS selectivity.For Cu(Ⅰ)-Y(Ⅲ)-Y,a new strong S-M interaction(S stands for sulfur,while M stands for metal)active site was formed,which might be caused by the synergistic effect between Cu(Ⅰ)and Y(Ⅲ).The Cu(Ⅰ)-Y(Ⅲ)-Y,which combined the advantages of Cu(I)-Y and Y(Ⅲ)-Y,is a kind of promising adsorbent.The breakthrough loading decreased in the order of Cu(Ⅰ)-Y(Ⅲ)-Y>Y(Ⅲ)-Y>Cu(Ⅰ)-Y,and the effect of xylene isomers on the sulfur removal was in the order of ortho-xylene>meta-xylene>para-xylene,which exhibited the same trend with the bond order of xylenes.

Comparison of air-borne xylene biodegradation between immobilizedcell biofilter and biofilm attached biofilter

The Bacillus firmus was immobilized into Ca-alginate beads according to the different initial biomass concentration, calcification time and activation time. Three types of immobilized Bacillus firmus beads were packed respectively in trickling biofilter to purify xylene contained waste gases, and the performance of immobilized-cell biofilter was compared with traditional biofilm attached biofilter packed with two types of ceramic pellets. The results showed that three types of immobilized beads had different capabilities for removing xylene and life-spans. Higher initial biomass in immobilized beads resulted in better performance but shorter life-span. Activation process can remarkably enhance the activity of bacteria, and the removal efficiency of xylene can substantially be improved. Calcification time had influence on life-span of immobilized beads. Without acclimation, the cell-entrapped biofilter can obtain the maximum elimination capacity of 92.4 g/（m^3·h）. However, compared with biofilm attached biofilter, it has a poorer intrinsic drawback in volatile organic compounds （VOCs） removal due to the existence of excess mass transfer resistance.

A Good GC Stationary Phase for Separation of Xylene Isomers

An excellent separation of xylene isomers is reported using 2, 6-O-di-pentyl-3-O-acetyl-beta-CD as capillary stationary phase. The optimum conditions for the separation are also discussed.

Technology for Manufacture of Xylene from Toluene and Methanol with Coproduction of Low-Carbon Olefins Passed Appraisal

On November 30, 2018 “The technology for manufacture of xylene from toluene and methanol with coproduction of low-carbon olefins” jointly developed by the Yanchang Petroleum Group (YPG) and the CAS Dalian Institute of Chemical Physics (DICP) had passed the appraisal of research achievements. In order to open up a new In order to open up a new technical route for alkylation of toluene to p-xylene, the technical personnel of YPG and DICP have been jointly engaging in the activities for tackling key problems to set up a 10 kt/a commercial unit for producing xylene through reaction of methanol with toluene along with coproduction of low-carbon olefins.

Equilibrium Study for Reactive Extraction of Caproic Acid in Mibk and Xylene

The recovery of caproic acid from the aqueous stream is of practical relevance due to its market value and the stringent environmental standards. The profound success of reactive extraction has been noted in the recovery of carboxylic acids from dilute solutions. In present paper, equilibrium of caproic acid with aliquat-336, a quaternary amine compound, in xylene and Methyl Isobutyl Ketone (MIBK) has been studied. Equilibrium parameters such as distribution coefficients, loading ratio, degree of extraction and equilibrium complexation constants have been presented. The data obtained is useful in understanding the equilibrium characteristics and efficient design of the recovery process of caproic acid by reactive extraction.

Optimizing support acidity of NiMo catalysts for increasing the yield of benzene, toluene and xylene in tetralin hydrocracking

To enhance the yields of benzene,toluene,and xylene in tetralin hydrocracking,the effect of the support acid properties of NiMo catalysts on hydrocracking performance of tetralin were investigated in this study.NaY zeolites were modified by hydrothermal treatment to form USY zeolites at different temperatures and adjust the type and amount of acid.In addition,H-Beta was loaded into the USY to further adjust the acidic properties of the catalysts.The result shows that when the total B acid content of the catalyst is maintained between 150 and 200μmol·g^(-1),the total acid amount is maintained between 1.7 and 1.9 mmol·g^(-1),and the L/B(L and B acids)ratio is maintained between 1.5 and 2,the catalysts have favorable performances on tetralin hydrocracking.Under this condition,the catalysts have a yield of benzene,toluene,and xylene higher than 30 wt%and a selectivity for benzene,toluene,and xylene higher than 35%.The tetralin conversion is greater than 85 wt%.The AB6 catalyst obtains the best hydrocracking effect with the conversion of tetralin reaching 90.24 wt%,the yields of benzene,toluene,and xylene reaching 33.58 wt%,and the selectivity of benzene,toluene,and xylene reaching 37.21%,respectively.

Effect of mesopore spatial distribution of HZSM-5 catalyst on zinc state and product distribution in 1-hexene aromatization

1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put forward higher requirements for new generation of catalyst.For increasing xylene yield in 1-hexene aromatization,the effect of mesopore structure and spatial distribution on product distribution and Zn loading was studied.Catalysts with different mesopore spatial distribution were prepared by post-treatment of parent HZSM-5 zeolite,including NaOH treatment,tetra-propylammonium hydroxide(TPAOH)treatment,and recrystallization.It was found the evenly distributed mesopore mainly prolongs the catalyst lifetime by enhancing diffusion properties but reduces the aromatics selectivity,as a result of damage of micropores close to the catalyst surface.While the selectivity of high-value xylene can be highly promoted when the mesopore is mainly distributed interior the catalyst.Besides,the state of loaded Zn was also affected by mesopores spatial distribution.On the optimized catalyst,the xylene selectivity was enhanced by 12.4%compared with conventional Zn-loaded parent HZSM-5 catalyst at conversion over 99%.It was attributed to the synergy effect of mesopores spatial distribution and optimized acid properties.This work reveals the role of mesopores in different spatial positions of 1-hexene aromatization catalysts in the reaction process and the influence on metal distribution,as well as their synergistic effect two on the improvement of xylene selectivity,which can improve our understanding of catalyst pore structure and be helpful for the rational design of high-efficient catalyst.

Qualitative analysis of aromatic compounds via 1D TOCSY techniques

The aromatic compounds,including o-xylene,m-xylene,p-xylene,and ethylbenzene,primarily originate from the catalytic reforming of crude oil,and have a wide variety of applications.However,because of similar physical and chemical properties,these compounds are difficult to be identified by gas chromatography(GC)without standard samples.With the development of modern nuclear magnetic resonance(NMR)techniques,NMR has emerged as a powerful and efficient tool for the rapid analysis of complex and crude mixtures without purification.In this study,the parameters of one-dimensional(1D)total correlation spectroscopy(TOCSY)NMR techniques,including 1D selective gradient TOCSY and 1D chemicalshift-selective filtration(CSSF)with TOCSY,were optimized to obtain comprehensive molecular structure information.The results indicate that the overlapped signals in NMR spectra of nonpolar aromatic compounds(including o-xylene,m-xylene,p-xylene and ethylbenzene),polar aromatic compounds(benzyl alcohol,benzaldehyde,benzoic acid),and aromatic compounds with additional conjugated bonds(styrene)can be resolved in 1D TOCSY.More importantly,full molecular structures can be clearly distinguished by setting appropriate mixing time in 1D TOCSY.This approach simplifies the NMR spectra,provides structural information of entire molecules,and can be applied for the analysis of other structural isomers.

Synthesis, physicochemical characterizations and catalytic performance of Pd/carbon-zeolite and Pd/carbon-Ce02 nanocatalysts used for total oxidation of xylene at low temperatures

In this work, xylene removal from waste gas streams was investigated via catalytic oxidation over Pd/ carbon-zeolite and Pd/carbon-CeO2 nanocatalysts. Acti- vated carbon was obtained from pine cone chemically activated using ZnC12 and modified by HaPO4. Natural zeolite of clinoptilolite was with HC1, while nano-ceria modified by acid treatment was synthesized via redox method. Mixed supports of carbon-zeolite and carbon- ceria were prepared and palladium was dispersed over them via impregnation method. The prepared samples were characterized by X-ray emission scanning electron diffraction （XRD）, field microscopy （FESEM）, Brunauer-Emmett-Teller surface area （BET）, Fourier transform infrared spectroscopy （FTIR） and thermogravi- metric （TG） techniques. Characterization of nanocatalysts revealed a good morphology with an average particle size in a nano range, and confirmed the formation ofnano-ceria with an average crystallite size below 60 nm. BET analysis indicated a considerable surface area for catalysts （-1000 m^2·g^-1）. FTIR patterns demonstrated that the surface groups of synthesized catalysts are in good agreement with the patterns of materials applied in catalyst synthesis. The performance of catalysts was assessed in a low-pressure catalytic oxidation pilot in the temperature range of 100℃-250℃. According to the reaction data, the synthesized catalysts have been shown to be so advantageous in the removal of volatile organic compounds （VOCs）, represent- ing high catalytic performance of 98% for the abatement of xylene at 250℃. Furthermore, a reaction network is proposed for catalytic oxidation of xylene over nanocata- lysts.

Benzene, toluene and xylenes levels in new and used vehicles of the same model

The aim of this work was to determine the level of benzene, toluene, o-xylene and m, p-xylene （BTX） in air samples collected from the cabins of new and used vehicles of the same model. Ten new vehicles were examined in order to check interior emission from materials used to equip the passenger compartment. In order to compare and define the impact of exhaust gases, air samples were also collected from two used cars, at different mileages （up to 20,000 kin）. All vehicles tested were of the same type. Samples were collected onto Carbograph 1TD sorbent, thermally desorbed and examined with the use of gas chromatography with flame ionisation and mass spectrometry detectors. All results obtained were referred to Polish and German requirements for indoor air quality （both in public buildings and in workspace environments）. Average benzene, toluene, o-xylene and m, p-xylene concentrations in new cars were determined at the level of 11.8 μg/m^3, 82.7 μg/m^3, 21.2 μg/m^3 and 89.5 μg/m^3, respectively. In the used cars, BTX concentration increased with increasing vehicle mileage. The most significant increase of BTX concentration was observed above 11,000 km mileage.

Photocatalytic oxidation of gaseous benzene,toluene and xylene under UV and visible irradiation over Mn-doped TiO_(2)nanoparticles

The photocatalytic oxidation of gaseous benzene,toluene and xylene(BTX)over un-doped,0.1 and 1 wt%Mn-TiO_(2)nanoparticles under ultraviolet and visible irradiation was studied in atmosphere of synthetic air or inert gas.The photocatalytic decomposition efficiency and the oxidation products were determined using a Static Photochemical Reactor coupled with FTIR spectroscopy.BTX underwent efficient decomposition over Mn-TiO_(2)photocatalysts under UV irradiation,more with oxygen presence and less without oxygen.More important toluene and xylene went substantial decomposition over 0.1 mol%Mn-TiO_(2)under visible irradiation with oxygen presence.The main final oxidation products in the UV photocatalysis of BTX were CO_(2),CO and H2O,with CO_(2) and CO yields 4 and 2 respectively.The conversion percentage of benzene,toluene,and xylene to CO_(2) were 63.6%,56.4%,51.8%,and to CO 29%,26.5%,23.2%,respectively.In the visible photocatalysis of toluene and xylene the yields of CO were insignificant.Formation of carbon containing deposits on TiO_(2)surfaces was observed after extensive UV photocatalysis of toluene and xylene,and such by-products surface coverage may reduce the photocatalytic activity of TiO_(2)samples.Some aspects of the photocatalytic mechanism were examined.

Adsorption of toluene, ethylbenzene and xylene isomers on multi-walled carbon nanotubes oxidized by different concentration of NaOCI

Multi-walled carbon nanotubes （MWCNTs） were fabricated and oxidized by different concentrations of sodium hypochlorite （NaOC1） solutions. The untreated MWCNTs and modified MWCNTs were employed as adsorbents to study their characterizations and adsorption performance of toluene, ethylbenzene and xylene isomers （TEX） in an aqueous solution. The physicochemical properties of MWCNTs were greatly affected after oxidation, which influences TEX adsorption capacity. The 3% NaOCl-oxidized MWCNTs shows the greatest enhancement in TEX adsorption, followed by the 30% NaOCl. More interestingly, the 15% NaOCl-oxidized MWCNTs has lower adsorption capacities than untreated MWCNTs. The adsorption mechanism of TEX on treated MWCNTs is attributed to the combined action of hydrophobic interaction, π-π bonding interaction between the aromatic ring of TEX and the oxygen-containing functional groups of MWCNTs and electrostatic interac- tion. 3% NaOCl solution could not only introduce much oxygen-containing functional groups on MWCNTs, but also lead to less damage for the pore structure. This suggests that the CNTs-3% NaOCl is efficient adsorbent for TEX and that they may possess good potential for TEX removal in wastewater treatment.

芳烃抽提装置混二甲苯产品中苯含量异常分析及处理

对芳烃抽提装置大检修开工后出现二甲苯产品中苯含量异常的情况进行了分析,从二甲苯塔进料组成、换热器内漏分析、活性白土及白土进料温度四个方面进行了研究,最终确认原因并制定了相关措施。