This study is to analyze the influence of the modifier, 5~25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropy...This study is to analyze the influence of the modifier, 5~25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropyl)trimethoxysilane (GPMS) and vinyltrimethoxysilane (VMS), by the continuous stiffness measurement (CSM) technique of an instrumented-indentation testing (IIT) device. Films were synthesized by adding the stoichiometric amount of ethylenediamine (EDA) and benzoyl proxide (BPO) to SSO solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle. Intrinsic values of hardness and elastic modulus were determined with the average values in “plateau region” from “four-layer” explanation. And the brittle index of the modified coating systems was analyzed.展开更多
Assessment of drillability of rocks is vital in the selection,operation,and performance evaluation of cutting tools used in various excavation machinery deployed in mining and tunneling.The commonly used rock drillabi...Assessment of drillability of rocks is vital in the selection,operation,and performance evaluation of cutting tools used in various excavation machinery deployed in mining and tunneling.The commonly used rock drillability prediction methods,namely,drilling rate index(DRI)and Cerchar hardness index(CHI)have limitations in predicting the penetration rate due to differential wear of the cutting tool in rocks with varied hardness and abrasivity.Since cutting tools get blunt differently in different rocks,the stress beneath the tip of the bit decreases until it reaches a threshold value beyond which the penetration rate becomes constant.In this research,a new composite penetration rate index(CPRI)is suggested based on the investigations on four metamorphic rocks viz.quartzite,gneiss,schist and phyllite with varied hardness-abrasivity values.The penetration-time behavior was classified into active,moderate,passive,and dormant phases based on the reduction in penetration rate at different stages of drilling.A comparison of predicted penetration rate values using DRI and CPRI with actual penetration rate values clearly establishes the supremacy of CPRI.Micro-structure and hardness-based index was also developed and correlated with CPRI.The new indices can help predict cutting tool penetration and its consumption more accurately.展开更多
文摘This study is to analyze the influence of the modifier, 5~25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropyl)trimethoxysilane (GPMS) and vinyltrimethoxysilane (VMS), by the continuous stiffness measurement (CSM) technique of an instrumented-indentation testing (IIT) device. Films were synthesized by adding the stoichiometric amount of ethylenediamine (EDA) and benzoyl proxide (BPO) to SSO solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle. Intrinsic values of hardness and elastic modulus were determined with the average values in “plateau region” from “four-layer” explanation. And the brittle index of the modified coating systems was analyzed.
基金Authors thank the CPRI Project(NPP/2016/HY/1/13042016)for partially supporting the study.Support from NHPC Ltd.and NTPC Ltd.is also thankfully acknowledged.
文摘Assessment of drillability of rocks is vital in the selection,operation,and performance evaluation of cutting tools used in various excavation machinery deployed in mining and tunneling.The commonly used rock drillability prediction methods,namely,drilling rate index(DRI)and Cerchar hardness index(CHI)have limitations in predicting the penetration rate due to differential wear of the cutting tool in rocks with varied hardness and abrasivity.Since cutting tools get blunt differently in different rocks,the stress beneath the tip of the bit decreases until it reaches a threshold value beyond which the penetration rate becomes constant.In this research,a new composite penetration rate index(CPRI)is suggested based on the investigations on four metamorphic rocks viz.quartzite,gneiss,schist and phyllite with varied hardness-abrasivity values.The penetration-time behavior was classified into active,moderate,passive,and dormant phases based on the reduction in penetration rate at different stages of drilling.A comparison of predicted penetration rate values using DRI and CPRI with actual penetration rate values clearly establishes the supremacy of CPRI.Micro-structure and hardness-based index was also developed and correlated with CPRI.The new indices can help predict cutting tool penetration and its consumption more accurately.