Application Strategies of Automatic Addressable Single-Lamp Control Technology in Tunnel Lighting

The article mainly studies the application strategy of automatic addressable single-lamp control technology in tunnel lighting.It encompasses an introduction to this technology,an analysis of the tunnel lighting system using automatic addressable single-lamp control technology,and outlines the main development direction for this technology in modern tunnel lighting.The aim is to offer insights that can inform the rational deployment of this technology,thereby enhancing the lighting control effectiveness in modern tunnels and meeting their specific lighting requirements more effectively.

A low-noise X-band microwave source with digital automatic frequency control for electron paramagnetic resonance spectroscopy

We report a new design of microwave source for X-band electron paramagnetic resonance spectrometer.The microwave source is equipped with a digital automatic frequency control circuit.The parameters of the digital automatic frequency control circuit can be flexibly configured for different experimental conditions,such as the input powers or the quality factors of the resonator.The configurability makes the microwave source universally compatible and greatly extends its application.To demonstrate the ability of adapting to various experimental conditions,the microwave source is tested by varying the input powers and the quality factors of the resonator.A satisfactory phase noise as low as-135 d Bc/Hz at 100-k Hz offset from the center frequency is achieved,due to the use of a phase-locked dielectric resonator oscillator and a direct digital synthesizer.Continuous-wave electron paramagnetic resonance experiments are conducted to examine the performance of the microwave source.The outstanding performance shows a prospect of wide applications of the microwave source in numerous fields of science.

Design and Simulation of an Audio Signal Alerting and Automatic Control System

A large part of our daily lives is spent with audio information. Massive obstacles are frequently presented by the colossal amounts of acoustic information and the incredibly quick processing times. This results in the need for applications and methodologies that are capable of automatically analyzing these contents. These technologies can be applied in automatic contentanalysis and emergency response systems. Breaks in manual communication usually occur in emergencies leading to accidents and equipment damage. The audio signal does a good job by sending a signal underground, which warrants action from an emergency management team at the surface. This paper, therefore, seeks to design and simulate an audio signal alerting and automatic control system using Unity Pro XL to substitute manual communication of emergencies and manual control of equipment. Sound data were trained using the neural network technique of machine learning. The metrics used are Fast Fourier transform magnitude, zero crossing rate, root mean square, and percentage error. Sounds were detected with an error of approximately 17%;thus, the system can detect sounds with an accuracy of 83%. With more data training, the system can detect sounds with minimal or no error. The paper, therefore, has critical policy implications about communication, safety, and health for underground mine.

Monitor automatic gauge control strategy with a Smith predictor for steel strip rolling

The simplified transfer function diagram block for a monitor automatic gauge control （Mon-AGC） system of strip steel rolling process was investigated. The new notion of strip sample length was given. In this way, the delay time varying with the rolling speed was evaded. After a Smith predictor was used to monitor the AGC system, the control laws were deduced for both proportional and integral regulators. The control strategies showed that by choosing the controller parameter P=∞ for both control algo- rithms each regulator could compensate the whole strip gage error in the first control step. The result shows that the integral algo- rithm is more controllable for the system regulating process and has a better steady-state precision than the proportional regulator. Compared with the traditional control strategy, the new control laws have a faster response speed and a hieher steadv-state precision.

MAS Based Distributed Automatic Generation Control for Cyber-Physical Microgrid System

The microgrid is a typical cyber-physical microgrid system(CPMS). The physical unconventional distributed generators(DGs) are intermittent and inverter-interfaced which makes them very different to control. The cyber components,such as the embedded computer and communication network,are equipped with DGs, to process and transmit the necessary information for the controllers. In order to ensure system-wide observability, controllability and stabilization for the microgrid,the cyber and physical component need to be integrated. For the physical component of CPMS, the droop-control method is popular as it can be applied in both modes of operation to improve the grid transient performance. Traditional droop control methods have the drawback of the inherent trade-off between power sharing and voltage and frequency regulation. In this paper, the global information(such as the average voltage and the output active power of the microgrid and so on) are acquired distributedly based on multi-agent system(MAS). Based on the global information from cyber components of CPMS, automatic generation control(AGC) and automatic voltage control(AVC)are proposed to deal with the drawback of traditional droop control. Simulation studies in PSCAD demonstrate the effectiveness of the proposed control methods.

Multi-timescale robust dispatching for coordinated automatic generation control and energy storage

The increasing penetration of renewable energy into power grids is reducing the regulation capacity of automatic generation control(AGC).Thus,there is an urgent demand to coordinate AGC units with active equipment such as energy storage.Current dispatch decision-making methods often ignore the intermittent effects of renewable energy.This paper proposes a two-stage robust optimization model in which energy storage is used to compensate for the intermittency of renewable energy for the dispatch of AGC units.This model exploits the rapid adjustment capability of energy storage to compensate for the slow response speed of AGC units,improve the adjustment potential,and respond to the problems of intermittent power generation from renewable energy.A column and constraint generation algorithm is used to solve the model.In an example analysis,the proposed model was more robust than a model that did not consider energy storage at eliminating the effects of intermittency while offering clear improvements in economy and efficiency.

Design of a Modularized Automatic Measurement and Control System for LaserInduced Breakdown Spectrometer

In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and control system was developed. Based on the characteristics of each LIBS component, the following development steps have been performed:( 1) a summary of characteristic parameters of the component are established;( 2) the integration mechanism of multiple electrical interfaces is designed;( 3) the component control instruction library is developed. The experimental results indicate that the measurement and control system is compatible with most LIBS parts in the market.Spectrometer and laser can be compatible with at least three different types of parts. In addition,a multilayer iterative testing process is designed to improve the efficiency of optimization process of LIBS parameters. The experimental results have shown that the automatic optimization of the delay time compared to the manual testing provides significant gain in testing efficiency. The range of delay time in the experiments is 1. 28 to 10. 28 μs and the step value is 1,0. 5,0. 2 and 0. 1 μs. The gain in testing efficiency has been found to be increased by 73. 76%,75. 93%,78. 81% and 80. 42%,respectively.

OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION

In parallel hybrid electrical vehicle （PHEV） equipped with automatic mechanical transmission （AMT）, the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously.

Design and realization of the automatic control system for the bell anneal furnace production

In accordance with the technical requirements of the full hydrogen bell anneal furnace(BAF)used for the annealing of stainless steel coils in the Baosteel Stainless Steel Business Unit,the design concept for the automatic control system was introduced in the paper.The major points described concerned the infrastructure of computers and networks,system interfaces,control functions,etc.The process control system of the full hydrogen BAF(L2)was the topic and its seven main functions were introduced.The expected output was achieved and manufacturing efficiency was enhanced within three months after the BAF units were put into operation,which demonstrated that the design concept of the automatic control system introduced in the paper was correct and that its functionalities were effective.

Design and Implementation of Automatic Control Drip Irrigation Device in Macadamia Digital Management

Macadamia has the highest economic value and has always enjoyed the reputation of"king of dried fruits".In the process of digital management,irrigation is the most widely used.This paper designs the automatic control drip irrigation device in the digital management of macadamia nuts,including drip irrigation pipe,soil moisture sensor,motor,water storage chamber,water pump and central controller,and then gives an implementation scheme.The device is not only convenient for laying and positioning,but also convenient for controlling the overall irrigation water consumption during each drip irrigation and accurate use and improving the level of digital management.

The Application of Principle of Automatic Control in the site Management of Electric Power Construction Enterprise

It is need to establish site project department during the construction of electric power project.The head office should design and build the main structure,continually improve structure of project department,meantime,positively apply principle of automatic control to improve the site management of electric power construction.In this article,the application strategy of principle of automatic control is analyzed focusing on the site work of electric power construction.

HUMAN-IMITATING INTELLIGENT CONTROL AND TRIPLE INVERTED-PENDULUM

A 'Human-Imitating Intelligent Control Theory' with 'generalized reduction' and 'Human Imitating' concepts as its kernel is proposed. And a world puzzlein the control circles is solved successfully based on this theory. The puzzle is thewell-known 'triple inverted pendulum control' using a SINGLE motor. A human-imitating intelligent technique to control inverted pendulum is here described. The success. ful experimental results show that our control objective can be achieved without a precise mathematical model of the plant. Finally, general principles of designing complexautomatic control systems based on the human-imitating intelligent control theory areconcluded.

FOUR-PARAMETER AUTOMATIC TRANSMISSION TECHNOLOGY FOR CONSTRUCTION VEHICLE BASED ON ELMAN RECURSIVE NEURAL NETWORK

From the viewpoint of energy saving and improving transmission efficiency, the ZL50E wheel loader is taken as the study object. And the system model is analyzed based on the transmission system of the construction vehicle. A new four-parameter shift schedule is presented, which can keep the torque converter working in the high efficiency area. The control algorithm based on the Elman recursive neural network is applied, and four-parameter control system is developed which is based on industrial computer. The system is used to collect data accurately and control 4D180 power-shift gearbox of ZL50E wheel loader shift timely. An experiment is done on automatic transmission test-bed, and the result indicates that the control system could reliably and safely work and improve the efficiency of hydraulic torque converter. Four-parameter shift strategy that takes into account the power consuming of the working pump has important operating significance and reflects the actual working status of construction vehicle.

Study and application of crown feedback control in hot strip rolling

Crown feedback control is one part of the automatic shape control （ASC） system. On the basis of large simulation researches conducted, a linear crown feedback control model was put forward and applied in actual strip rolling. According to its successful op- eration in the ASP 1700 hot strip mill of Angang Group for one year and also from the statistical results of several crown measurements, it can be definitely said that this control model is highly effective and shows stable performance. The control effectiveness of different gauges of strips with the feedback control is found to increase by 10%-30% compared with that without feedback control.

Automatic Fast and Robust Technique to Refine Extracted SIFT Key Points for Remote Sensing Images

The scale-invariant feature transform(SIFT)ability to automatic control points(CPs)extraction is very well known on remote sensing images,however,its result inaccurate and sometimes has incorrect matching from generating a small number of false CPs pairs,their matching has high false alarm.This paper presents a method containing a modification to improve the performance of the SIFT CPs matching by applying sum of absolute difference(SAD)in different manner for the new optical satellite generation called near-equatorial orbit satellite(NEqO)and multi-sensor images.The proposed method leads to improving CPs matching with a significantly higher rate of correct matches.The data in this study were obtained from the RazakSAT satellite covering the Kuala Lumpur-Pekan area.The proposed method consists of three parts:(1)applying the SIFT to extract CPs automatically,(2)refining CPs matching by SAD algorithm with empirical threshold,and(3)evaluating the refined CPs scenario by comparing the result of the original SIFT with that of the proposed method.The result indicates an accurate and precise performance of the model,which showed the effectiveness and robustness of the proposed approach.

Hopf Bifurcation Analysis and Control for Electrical System of Military Vehicle

Electrical system of military vehicle is a typical parameterized nonlinear system where complicated bifurcations may exist and threaten its safe and stable operation. An algebraic criterion for Hopf bifurcation is presented briefly and applied to find Hopf bifurcation point of the electrical system with automatic voltage regulator(AVR) dynamics in military vehicle. Hopf bifurcation controllers are designed for this electrical system by using wash-out filter,linear feedback,nonlinear feedback and their combination. The linear feedback control makes the system bring Hopf bifurcation at preferable parameter,the nonlinear feedback control modifies the type of the bifurcation,and the wash-out filter enhances the system damping,thus,the Hopf bifurcation is eliminated and the electrical system stability is ensured. Simulation results show the controller's validity.

Application of Adaptive Backstepping Sliding Mode Control in Alternative Current Servo System of Rocket Launcher

An adaptive backstepping sliding mode control approach is introduced to control the pitch motion of a rocket launcher. Its control law is proposed to guarantee that the control system is ultimately bounded in a Lyapunov sense and make the servo system track the instruction of reference position globally and asymptotically. In addition, the sliding mode control can restrain the effects of parameter uncertainties and external disturbance. The functions of adaptive mechanism and sliding mode control are analyzed through the simulation in the different conditions.The simulation results illustrate that the method is applicable and robust.

Depth Control for AUV Based on RS-LSSVM

Aimed at uncertainties and model's impreciseness, nonlinearity and time-variability of depth control system in autonomous underwater vehicle (AUV), a depth predictive control method was put forward based on rough set (RS) and least squares support vector machine (LSSVM). By using RS theory, the monitor data attribute of AUV was reduced to eliminate the redundant information and to improve efficiency. Then, LSSVM model was trained by using the reduced rules, and its parameters were optimized by using chaos theory for the higher accurate control. Taken an AUV typed NPS Phoenix as an example, its depth step response, horizontal rudder and pitch change were simulated. The simulation results show that the method improves the model's accuracy and has better real-time response, fault-tolerant ability, reliability and strong anti-interfere capability.

Design of Automatic Sorting System of Workpiece Based on Multi-sensor Detection

The sorting system applies multi-sensor technology,PLC technology,pneumatic technology and frequency converter technology to realize the efficient automatic sorting of workpieces and solve the problem of automatic sorting of more complex shaped products.Through running test,the system has high efficiency,reliable operation,strong practicability,and great application value in automatic production lines such as mechanical processing,electronic assembly and article circulation.