E^2KF Based Joint Multiple CFOs and Channel Estimate for MIMO-OFDM Systems over High Mobility Scenarios

An enhanced extended Kalman filtering （E2KF） algorithm is proposed in this paper to cope with the joint multiple carrier frequency offsets （CFOs） and time-variant channel estimate for MIMO-OFDM systems over high mobility scenarios. It is unveiled that, the auto-regressive （AR） model not only provides an effective method to capture the dynamics of the channel parameters, which enables the prediction capability in the EKF algorithm, but also suggests an method to incorporate multiple successive pilot symbols for the improved measurement update.

MAKING FULL USE OF OUTDATED CHANNEL ESTIMATES FOR BLOCK BY BLOCK ADAPTIVE MODULATIONS

This paper explores the potential to use accurate but outdated channel estimates for adaptive modulation. The work is novel in that the research is conditioned on block by block adaptation. First,we define a new quantity,the Tolerable Average Use Delay (TAUD),which can indicate the ability of an adaptation scheme to tolerate the delay of channel estimation results. We find that for the variable-power schemes,TAUD is a constant and dependent on the target Bit Error Rate (BER),average power and Doppler frequency; while for the constant-power schemes,it depends on the ad-aptation block length as well. At last,we investigate the relation between the delay tolerating per-formance and the spectral efficiency and give the system design criterion. The delay tolerating per-formance is improved at the price of lower data rate.

Cascaded ELM-Based Joint Frame Synchronization and Channel Estimation over Rician Fading Channel with Hardware Imperfections

Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.

Deep learning for joint channel estimation and feedback in massive MIMO systems

The great potentials of massive Multiple-Input Multiple-Output(MIMO)in Frequency Division Duplex(FDD)mode can be fully exploited when the downlink Channel State Information(CSI)is available at base stations.However,the accurate CsI is difficult to obtain due to the large amount of feedback overhead caused by massive antennas.In this paper,we propose a deep learning based joint channel estimation and feedback framework,which comprehensively realizes the estimation,compression,and reconstruction of downlink channels in FDD massive MIMO systems.Two networks are constructed to perform estimation and feedback explicitly and implicitly.The explicit network adopts a multi-Signal-to-Noise-Ratios(SNRs)technique to obtain a single trained channel estimation subnet that works well with different SNRs and employs a deep residual network to reconstruct the channels,while the implicit network directly compresses pilots and sends them back to reduce network parameters.Quantization module is also designed to generate data-bearing bitstreams.Simulation results show that the two proposed networks exhibit excellent performance of reconstruction and are robust to different environments and quantization errors.

Off-Grid Compressed Channel Estimation with Parallel Interference Cancellation for Millimeter Wave Massive MIMO

Millimeter wave(mmWave)massive multiple-input multiple-output(MIMO)plays an important role in the fifth-generation(5G)mobile communications and beyond wireless communication systems owing to its potential of high capacity.However,channel estimation has become very challenging due to the use of massive MIMO antenna array.Fortunately,the mmWave channel has strong sparsity in the spatial angle domain,and the compressed sensing technology can be used to convert the original channel matrix into the sparse matrix of discrete angle grid.Thus the high-dimensional channel matrix estimation is transformed into a sparse recovery problem with greatly reduced computational complexity.However,the path angle in the actual scene appears randomly and is unlikely to be completely located on the quantization angle grid,thus leading to the problem of power leakage.Moreover,multiple paths with the random distribution of angles will bring about serious interpath interference and further deteriorate the performance of channel estimation.To address these off-grid issues,we propose a parallel interference cancellation assisted multi-grid matching pursuit(PIC-MGMP)algorithm in this paper.The proposed algorithm consists of three stages,including coarse estimation,refined estimation,and inter-path cyclic iterative inter-ference cancellation.More specifically,the angular resolution can be improved by locally refining the grid to reduce power leakage,while the inter-path interference is eliminated by parallel interference cancellation(PIC),and the two together improve the estimation accuracy.Simulation results show that compared with the traditional orthogonal matching pursuit(OMP)algorithm,the normalized mean square error(NMSE)of the proposed algorithm decreases by over 14dB in the case of 2 paths.

Channel Estimation for Reconfigurable Intelligent Surface Aided Multiuser Millimeter-Wave/THz Systems

It is assumed that reconfigurable intelligent surface(RIS)is a key technology to enable the potential of mmWave communications.The passivity of the RIS makes channel estimation difficult because the channel can only be measured at the transceiver and not at the RIS.In this paper,we propose a novel separate channel estimator via exploiting the cascaded sparsity in the continuously valued angular domain of the cascaded channel for the RIS-enabled millimeter-wave/Tera-Hz systems,i.e.,the two-stage estimation method where the cascaded channel is separated into the base station(BS)-RIS and the RIS-user(UE)ones.Specifically,we first reveal the cascaded sparsity,i.e.,the sparsity exists in the hybrid angular domains of BS-RIS and the RIS-UEs separated channels,to construct the specific sparsity structure for RIS enabled multi-user systems.Then,we formulate the channel estimation problem using atomic norm minimization(ANM)to enhance the proposed sparsity structure in the continuous angular domains,where a low-complexity channel estimator via Alternating Direction Method of Multipliers(ADMM)is proposed.Simulation findings demonstrate that the proposed channel estimator outperforms the current state-of-the-arts in terms of performance.

Improving Channel Estimation in a NOMA Modulation Environment Based on Ensemble Learning

This study presents a layered generalization ensemble model for next generation radio mobiles,focusing on supervised channel estimation approaches.Channel estimation typically involves the insertion of pilot symbols with a well-balanced rhythm and suitable layout.The model,called Stacked Generalization for Channel Estimation(SGCE),aims to enhance channel estimation performance by eliminating pilot insertion and improving throughput.The SGCE model incorporates six machine learning methods:random forest(RF),gradient boosting machine(GB),light gradient boosting machine(LGBM),support vector regression(SVR),extremely randomized tree(ERT),and extreme gradient boosting(XGB).By generating meta-data from five models(RF,GB,LGBM,SVR,and ERT),we ensure accurate channel coefficient predictions using the XGB model.To validate themodeling performance,we employ the leave-one-out cross-validation(LOOCV)approach,where each observation serves as the validation set while the remaining observations act as the training set.SGCE performances’results demonstrate higher mean andmedian accuracy compared to the separatedmodel.SGCE achieves an average accuracy of 98.4%,precision of 98.1%,and the highest F1-score of 98.5%,accurately predicting channel coefficients.Furthermore,our proposedmethod outperforms prior traditional and intelligent techniques in terms of throughput and bit error rate.SGCE’s superior performance highlights its efficacy in optimizing channel estimation.It can effectively predict channel coefficients and contribute to enhancing the overall efficiency of radio mobile systems.Through extensive experimentation and evaluation,we demonstrate that SGCE improved performance in channel estimation,surpassing previous techniques.Accordingly,SGCE’s capabilities have significant implications for optimizing channel estimation in modern communication systems.

Tensor Decomposition-Based Channel Estimation and Sensing for Millimeter Wave MIMO-OFDM V2I Systems

An integrated sensing and communication(ISAC)scheme for a millimeter wave(mmWave)multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM)Vehicle-to-Infrastructure(V2I)system is presented,in which both the access point(AP)and the vehicle are equipped with large antenna arrays and employ hybrid analog and digital beamforming structures to compensate the path loss,meanwhile compromise between hardware complexity and system performance.Based on the sparse scattering nature of the mmWave channel,the received signal at the AP is organized to a four-order tensor by the introduced novel frame structure.A CANDECOMP/PARAFAC(CP)decomposition-based method is proposed for time-varying channel parameter extraction,including angles of departure/arrival(AoDs/AoAs),Doppler shift,time delay and path gain.Then leveraging the estimates of channel parameters,a nonlinear weighted least-square problem is proposed to recover the location accurately,heading and velocity of vehicles.Simulation results show that the proposed methods are effective and efficient in time-varying channel estimation and vehicle sensing in mmWave MIMOOFDM V2I systems.

Accurate Interconnection Length and Routing Channel Width Estimates for FPGAs

We study the problem of the prediction of interconnection dimensions for FPGAs, including estimating interconnection length and channel width. Experimental results show that our estimates are more accurate than those of existing methods.

Joint Multi-Domain Channel Estimation Based on Sparse Bayesian Learning for OTFS System

Since orthogonal time-frequency space(OTFS)can effectively handle the problems caused by Doppler effect in high-mobility environment,it has gradually become a promising candidate for modulation scheme in the next generation of mobile communication.However,the inter-Doppler interference(IDI)problem caused by fractional Doppler poses great challenges to channel estimation.To avoid this problem,this paper proposes a joint time and delayDoppler(DD)domain based on sparse Bayesian learning(SBL)channel estimation algorithm.Firstly,we derive the original channel response(OCR)from the time domain channel impulse response(CIR),which can reflect the channel variation during one OTFS symbol.Compare with the traditional channel model,the OCR can avoid the IDI problem.After that,the dimension of OCR is reduced by using the basis expansion model(BEM)and the relationship between the time and DD domain channel model,so that we have turned the underdetermined problem into an overdetermined problem.Finally,in terms of sparsity of channel in delay domain,SBL algorithm is used to estimate the basis coefficients in the BEM without any priori information of channel.The simulation results show the effectiveness and superiority of the proposed channel estimation algorithm.

Multiple Vandermonde Decomposition Based Channel Estimation for Mm Wave MIMO High-Mobility Communication in 5G and Beyond

Millimeter wave(mmWave)massive massive multiple input multiple output(MIMO)technique has been regarded as the viable solution for vehicular communications in 5G and beyond.To achieve the substantial increase in date rates,it is important to take an effective channel state information(CSI).However,existing channel estimation strategies are unavailable since the users high-mobility.To solve above issues,in this paper,inspired by a specific antenna structure,we propose a novel approach for fast time-varying channel estimation.Specifically,by considering the vehicle scenario with high-mobility,a corresponding mathematical model is firstly established.Then,based on the special structural of the sparse array,the switch network is used to replace the convention phase shifter of mmWave hybrid system,which can effectively reduce the number of radio-frequency(RF)chains and antennas.Furthermore,by solving the semidefinite programming(SDP)duality problem,the Doppler frequency and path parameters are effectively estimated.Simulation results are shown that the computational complexity and estimation accuracy of the proposed algorithm is superior than that of the traditional schemes.

Low PAPR Channel Estimation for OTFS with Scattered Superimposed Pilots

Orthogonal time frequency space(OTFS)modulation has been proven to be superior to traditional orthogonal frequency division multiplexing(OFDM)systems in high-speed communication scenarios.However,the existing channel estimation schemes may results in poor peak to average power ratio(PAPR)performance of OTFS system or low spectrum efficiency.Hence,in this paper,we propose a low PAPR channel estimation scheme with high spectrum efficiency.Specifically,we design a multiple scattered pilot pattern,where multiple low power pilot symbols are superimposed with data symbols in delay-Doppler domain.Furthermore,we propose the placement rules for pilot symbols,which can guarantee the low PAPR.Moreover,the data aided iterative channel estimation was invoked,where joint channel estimation is proposed by exploiting multiple independent received signals instead of only one received signal in the existing scheme,which can mitigate the interference imposed by data symbols for channel estimation.Simulation results shows that the proposed multiple scattered pilot aided channel estimation scheme can significantly reduce the PAPR while keeping the high spectrum efficiency.

Linear Precoder Design for Correlated Rician Fading Channel Under Imperfect CSI

In this paper,we have modeled a linear precoder for indoor multiuser multiple input multiple output(MU-MIMO)system with imperfect channel state information(CSI)at transmitter.The Rician channel is presumed to be mutually coupled and spatially,temporarily correlated.The imperfection with CSI is primarily due to the channel estimation error at receiver and feedback delay amidst the receiver and transmitter in CSI transmission.Along with,the insufficient spacing between the antenna at transmitter and receiver persuades mutual coupling(MC)among the array elements.In addition,the MIMO channel is presumed to be jointly correlated(Weichselberger correlation model).When we look back on the existing precoder design,it considered spatial correlation alone disregarding joint correlation of antenna array elements.With all above assumption,we have designed a linear precoder which minimizes mean squared error(MSE)subjected to total transmit power constraint for MUMIMO system.The simulation results proven that proposed precoder shows substantial enhancement in bit error rate(BER)performance in comparison with the existing technique.The mathematical analysis corroborates the simulation results.

Multi-Panel Extra-Large Scale MIMO Based Joint Activity Detection and Channel Estimation for Near-Field Massive IoT Access

The extra-large scale multiple-input multiple-output(XL-MIMO)for the beyond fifth/sixth generation mobile communications is a promising technology to provide Tbps data transmission and stable access service.However,the extremely large antenna array aperture arouses the channel near-field effect,resulting in the deteriorated data rate and other challenges in the practice communication systems.Meanwhile,multi-panel MIMO technology has attracted extensive attention due to its flexible configuration,low hardware cost,and wider coverage.By combining the XL-MIMO and multi-panel array structure,we construct multi-panel XL-MIMO and apply it to massive Internet of Things(IoT)access.First,we model the multi-panel XL-MIMO-based near-field channels for massive IoT access scenarios,where the electromagnetic waves corresponding to different panels have different angles of arrival/departure(AoAs/AoDs).Then,by exploiting the sparsity of the near-field massive IoT access channels,we formulate a compressed sensing based joint active user detection(AUD)and channel estimation(CE)problem which is solved by AMP-EM-MMV algorithm.The simulation results exhibit the superiority of the AMP-EM-MMV based joint AUD and CE scheme over the baseline algorithms.

AI Enlightens Wireless Communication: Analyses and Solutions for DMRS Channel Estimation

In this paper,a systematic description of the artificial intelligence(AI)-based channel estimation track of the 2nd Wireless Communication AI Competition(WAIC)is provided,which is hosted by IMT-2020(5G)Promotion Group 5G+AIWork Group.Firstly,the system model of demodulation reference signal(DMRS)based channel estimation problem and its corresponding dataset are introduced.Then the potential approaches for enhancing the performance of AI based channel estimation are discussed from the viewpoints of data analysis,pre-processing,key components and backbone network structures.At last,the final competition results composed of different solutions are concluded.It is expected that the AI-based channel estimation track of the 2nd WAIC could provide insightful guidance for both the academia and industry.

Machine learning-enabled MIMO-FBMC communication channel parameter estimation in IIoT: A distributed CS approach

Compressed Sensing(CS)is a Machine Learning(ML)method,which can be regarded as a single-layer unsupervised learning method.It mainly emphasizes the sparsity of the model.In this paper,we study an ML-based CS Channel Estimation(CE)method for wireless communications,which plays an important role in Industrial Internet of Things(IIoT)applications.For the sparse correlation between channels in Multiple Input Multiple Output Filter Bank MultiCarrier with Offset Quadrature Amplitude Modulation(MIMO-FBMC/OQAM)systems,a Distributed Compressed Sensing(DCS)-based CE approach is studied.A distributed sparse adaptive weak selection threshold method is proposed for CE.Firstly,the correlation between MIMO channels is utilized to represent a joint sparse model,and CE is transformed into a joint sparse signal reconstruction problem.Then,the number of correlation atoms for inner product operation is optimized by weak selection threshold,and sparse signal reconstruction is realized by sparse adaptation.The experiment results show that the proposed DCS-based method not only estimates the multipath channel components accurately but also achieves higher CE performance than classical Orthogonal Matching Pursuit(OMP)method and other traditional DCS methods in the time-frequency dual selective channels.

QBFO-BOMP Based Channel Estimation Algorithm for mmWave Massive MIMO Systems

At present,the traditional channel estimation algorithms have the disadvantages of over-reliance on initial conditions and high complexity.The bacterial foraging optimization(BFO)-based algorithm has been applied in wireless communication and signal processing because of its simple operation and strong self-organization ability.But the BFO-based algorithm is easy to fall into local optimum.Therefore,this paper proposes the quantum bacterial foraging optimization(QBFO)-binary orthogonal matching pursuit(BOMP)channel estimation algorithm to the problem of local optimization.Firstly,the binary matrix is constructed according to whether atoms are selected or not.And the support set of the sparse signal is recovered according to the BOMP-based algorithm.Then,the QBFO-based algorithm is used to obtain the estimated channel matrix.The optimization function of the least squares method is taken as the fitness function.Based on the communication between the quantum bacteria and the fitness function value,chemotaxis,reproduction and dispersion operations are carried out to update the bacteria position.Simulation results showthat compared with other algorithms,the estimationmechanism based onQBFOBOMP algorithm can effectively improve the channel estimation performance of millimeter wave(mmWave)massive multiple input multiple output(MIMO)systems.Meanwhile,the analysis of the time ratio shows that the quantization of the bacteria does not significantly increase the complexity.

UAMP-Based Delay-Doppler Channel Estimation for OTFS Systems

Orthogonal time frequency space(OTFS)technique,which modulates data symbols in the delay-Doppler(DD)domain,presents a potential solution for supporting reliable information transmission in highmobility vehicular networks.In this paper,we study the issues of DD channel estimation for OTFS in the presence of fractional Doppler.We first propose a channel estimation algorithm with both low complexity and high accuracy based on the unitary approximate message passing(UAMP),which exploits the structured sparsity of the effective DD domain channel using hidden Markov model(HMM).The empirical state evolution(SE)analysis is then leveraged to predict the performance of our proposed algorithm.To refine the hyperparameters in the proposed algorithm,we derive the update criterion for the hyperparameters through the expectation-maximization(EM)algorithm.Finally,Our simulation results demonstrate that our proposed algorithm can achieve a significant gain over various baseline schemes.

Machine Learning-Based Channel State Estimators for 5G Wireless Communication Systems

For a 5G wireless communication system,a convolutional deep neural network(CNN)is employed to synthesize a robust channel state estimator(CSE).The proposed CSE extracts channel information from transmit-and-receive pairs through offline training to estimate the channel state information.Also,it utilizes pilots to offer more helpful information about the communication channel.The proposedCNN-CSE performance is compared with previously published results for Bidirectional/long short-term memory(BiLSTM/LSTM)NNs-based CSEs.The CNN-CSE achieves outstanding performance using sufficient pilots only and loses its functionality at limited pilots compared with BiLSTM and LSTM-based estimators.Using three different loss function-based classification layers and the Adam optimization algorithm,a comparative study was conducted to assess the performance of the presented DNNs-based CSEs.The BiLSTM-CSE outperforms LSTM,CNN,conventional least squares(LS),and minimum mean square error(MMSE)CSEs.In addition,the computational and learning time complexities for DNN-CSEs are provided.These estimators are promising for 5G and future communication systems because they can analyze large amounts of data,discover statistical dependencies,learn correlations between features,and generalize the gotten knowledge.

MmWave extra-large-scale MIMO based active user detection and channel estimation for high-speed railway communications

The current High-Speed Railway(HSR)communications increasingly fail to satisfy the massive access services of numerous user equipment brought by the increasing number of people traveling by HSRs.To this end,this paper investigates millimeter-Wave(mmWave)extra-large scale(XL)-MIMO-based massive Internet-of-Things(loT)access in near-field HSR communications,and proposes a block simultaneous orthogonal matching pursuit(B-SOMP)-based Active User Detection(AUD)and Channel Estimation(CE)scheme by exploiting the spatial block sparsity of the XLMIMO-based massive access channels.Specifically,we first model the uplink mmWave XL-MIMO channels,which exhibit the near-field propagation characteristics of electromagnetic signals and the spatial non-stationarity of mmWave XL-MIMO arrays.By exploiting the spatial block sparsity and common frequency-domain sparsity pattern of massive access channels,the joint AUD and CE problem can be then formulated as a Multiple Measurement Vectors Compressive Sensing(MIMV-CS)problem.Based on the designed sensing matrix,a B-SOMP algorithm is proposed to achieve joint AUD and CE.Finally,simulation results show that the proposed solution can obtain a better AUD and CE performance than the conventional CS-based scheme for massive IoT access in near-field HSR communications.