On the basis of introducing clean power generation technologies, the author calculated and analyzed the investment, economy and environmental protection of these technologies, posed his views of giving the priorities ...On the basis of introducing clean power generation technologies, the author calculated and analyzed the investment, economy and environmental protection of these technologies, posed his views of giving the priorities to the development of supercritical and ultra-supercritical pressure coal-fired power generation technologies and taking vigorous action to nuclear power generation technology within the following 5-10 years, exploiting wind power within the following 10-15 years, and suggested that the installed capacity of nuclear power reach 80-100 GW and that of wind power reach 50-80 GW by 2020.展开更多
China adopts the most advanced nuclear power technologies to meet long-term energy needs Nuclear power has taken center stage in China’s nationwide cam-paign to develop new and clean energy sources. In the latest eff...China adopts the most advanced nuclear power technologies to meet long-term energy needs Nuclear power has taken center stage in China’s nationwide cam-paign to develop new and clean energy sources. In the latest effort, Chinese state-owned nuclear power giants invested over 40 billion yuan ($5.86 billion) as an initial funding injection to build a new plant under展开更多
Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental probl...Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental problems.This paper focuses on near-zero emission technologies and applications for clean coal-fired power.The long-term operation states of near-zero emission units were evaluated,and synergistic and special mercury(Hg)control technologies were researched.The results show that the principle technical route of near-zero emission,which was applied to 101 of China’s coal-fired units,has good adaptability to coal properties.The emission concentrations of particulate matter(PM),SO2,and NOx were below the emission limits of gas-fired power plants and the compliance rates of the hourly average emission concentrations reaching near-zero emission in long-term operation exceeded 99%.With the application of near-zero emission technologies,the generating costs increased by about 0.01 CNY∙(kW∙h)-1.However,the total emissions of air pollutants decreased by about 90%,resulting in effective improvement of the ambient air quality.Furthermore,while the Hg emission concentrations of the near-zero emission units ranged from 0.51 to 2.89μg∙m^-3,after the modified fly ash(MFA)special Hg removal system was applied,Hg emission concentration reached as low as 0.29μg∙m^-3.The operating cost of this system was only 10%-15%of the cost of mainstream Hg removal technology using activated carbon injection.Based on experimental studies carried out in a 50000 m^3∙h^-1 coal-fired flue gas pollutant control pilot platform,the interaction relationships of multi-pollutant removal were obtained and solutions were developed for emissions reaching different limits.A combined demonstration application for clean coal-fired power,with the new“1123”eco-friendly emission limits of 1,10,20 mg∙m^-3,and 3μg∙m^-3,respectively,for PM,SO2,NOx,and Hg from near-zero emission coal-fired power were put forward and realized,providing engineering and technical support for the national enhanced pollution emission standards.展开更多
Demand of cement in developing countries is directly proportional to the development rate of that country. But increasing input cost of cement manufacturing, decreasing margin of profit, scarcity of raw coal availabil...Demand of cement in developing countries is directly proportional to the development rate of that country. But increasing input cost of cement manufacturing, decreasing margin of profit, scarcity of raw coal availability and emission of greenhouse gases are some constraints, which restrict the growth of cement industry. Hence to combat with all these adverse situations simultaneously, this project report introduces and efforts to generate clean and green energy with the help of combination of preheater tower, which is available in all integrated cement plants and an augmented wind turbine. Hence, the technology is named as “Power Producing Preheaters” or 3P.H. Introduction of 3P.H. in cement industry, generates a definite amount of clean and green energy (as per site conditions), which is directly used in cement production to avoid grid connectivity cost of wind turbine output. Calculations are done to show the overall cost of project, its payback period and reduction in emission of greenhouse gases along with its benefits in cement industry.展开更多
This paper is based on the existing status and development prediction of Fujian power industry, and describes that the structure of energy sources for generating power which will mainly use coal, will not be changed i...This paper is based on the existing status and development prediction of Fujian power industry, and describes that the structure of energy sources for generating power which will mainly use coal, will not be changed in the 2010s and 2020s in Fujian Province. In order to meet the requirements of high efficiency and envirofimental protection, the usage of clean coal technologies for power generating will be an inevitable option and the technologies will occupy the important position in Fujian power industry. This paper puts forward the staged targets and measures of developing and utilizing clean coal technologies, suggests that all government depotments related should give support and guarantee in policies and conditions, and welcome technical and economic cooperation at home and abroad, which is good for co-development of both parties.展开更多
Wind energy is a pollution free and renewable resource widely distributed over China. Aimed at protecting the environment and enlarging application of wind energy, a new approach to application of wind energy by using...Wind energy is a pollution free and renewable resource widely distributed over China. Aimed at protecting the environment and enlarging application of wind energy, a new approach to application of wind energy by using compressed air power to some extent instead of electricity put forward. This includes: explaining the working principles and charac-teristics of the wind energy-compressed air power system; discussing the compatibility of wind energy and compressor capacity; presenting the theoretical model and computational simulation of the system. The obtained compressor capacity vs wind power relationship in certain wind velocity range can be helpful in the designing of the wind power-compressed air system. Results of investigations on the application of high-pressure compressed air for pressure reduction led to conclusion that pressure reduction with expander is better than the throttle regulator in energy saving.展开更多
A clean technology in thermal power station by adding of limestone into coal for getting the co-melted compounds was studied. Comparing with conventional technology, the quantity of ash discharged is decreased from 85...A clean technology in thermal power station by adding of limestone into coal for getting the co-melted compounds was studied. Comparing with conventional technology, the quantity of ash discharged is decreased from 85% to 15%, the water consumption is 80% less than traditional method. The slag discharged could be used as raw materials for cement and bricks. In addition, the SO2 content is decreased as well.展开更多
New research developments suggest that nuclear reactors using fusion may enter the market sooner than imagined even for mobile applications, like merchant ship propulsion and remote power generation. This article aims...New research developments suggest that nuclear reactors using fusion may enter the market sooner than imagined even for mobile applications, like merchant ship propulsion and remote power generation. This article aims at pointing such developments and how they could affect nuclear fusion. The method is enumerating the main nuclear reactors concepts, identifying new technological or theoretical developments useful to nuclear field, and analysing how new recombination could affect feasibility of nuclear fusion. New technologies or experimental results do not always work the way people imagine, being better or worse for intended effects or even bringing completely unforeseen effects. Results point the following designs could be successful, in descending order of potential: aneutronic nuclear reactions using lattice confinement, aneutronic nuclear reactions using inertial along magnetic confinement, hybrid fission-lattice confinement fusion, and fission reactions.展开更多
文摘On the basis of introducing clean power generation technologies, the author calculated and analyzed the investment, economy and environmental protection of these technologies, posed his views of giving the priorities to the development of supercritical and ultra-supercritical pressure coal-fired power generation technologies and taking vigorous action to nuclear power generation technology within the following 5-10 years, exploiting wind power within the following 10-15 years, and suggested that the installed capacity of nuclear power reach 80-100 GW and that of wind power reach 50-80 GW by 2020.
文摘China adopts the most advanced nuclear power technologies to meet long-term energy needs Nuclear power has taken center stage in China’s nationwide cam-paign to develop new and clean energy sources. In the latest effort, Chinese state-owned nuclear power giants invested over 40 billion yuan ($5.86 billion) as an initial funding injection to build a new plant under
基金the National Science and Technology Support Program of China(2015BAA05B02).
文摘Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental problems.This paper focuses on near-zero emission technologies and applications for clean coal-fired power.The long-term operation states of near-zero emission units were evaluated,and synergistic and special mercury(Hg)control technologies were researched.The results show that the principle technical route of near-zero emission,which was applied to 101 of China’s coal-fired units,has good adaptability to coal properties.The emission concentrations of particulate matter(PM),SO2,and NOx were below the emission limits of gas-fired power plants and the compliance rates of the hourly average emission concentrations reaching near-zero emission in long-term operation exceeded 99%.With the application of near-zero emission technologies,the generating costs increased by about 0.01 CNY∙(kW∙h)-1.However,the total emissions of air pollutants decreased by about 90%,resulting in effective improvement of the ambient air quality.Furthermore,while the Hg emission concentrations of the near-zero emission units ranged from 0.51 to 2.89μg∙m^-3,after the modified fly ash(MFA)special Hg removal system was applied,Hg emission concentration reached as low as 0.29μg∙m^-3.The operating cost of this system was only 10%-15%of the cost of mainstream Hg removal technology using activated carbon injection.Based on experimental studies carried out in a 50000 m^3∙h^-1 coal-fired flue gas pollutant control pilot platform,the interaction relationships of multi-pollutant removal were obtained and solutions were developed for emissions reaching different limits.A combined demonstration application for clean coal-fired power,with the new“1123”eco-friendly emission limits of 1,10,20 mg∙m^-3,and 3μg∙m^-3,respectively,for PM,SO2,NOx,and Hg from near-zero emission coal-fired power were put forward and realized,providing engineering and technical support for the national enhanced pollution emission standards.
文摘Demand of cement in developing countries is directly proportional to the development rate of that country. But increasing input cost of cement manufacturing, decreasing margin of profit, scarcity of raw coal availability and emission of greenhouse gases are some constraints, which restrict the growth of cement industry. Hence to combat with all these adverse situations simultaneously, this project report introduces and efforts to generate clean and green energy with the help of combination of preheater tower, which is available in all integrated cement plants and an augmented wind turbine. Hence, the technology is named as “Power Producing Preheaters” or 3P.H. Introduction of 3P.H. in cement industry, generates a definite amount of clean and green energy (as per site conditions), which is directly used in cement production to avoid grid connectivity cost of wind turbine output. Calculations are done to show the overall cost of project, its payback period and reduction in emission of greenhouse gases along with its benefits in cement industry.
文摘This paper is based on the existing status and development prediction of Fujian power industry, and describes that the structure of energy sources for generating power which will mainly use coal, will not be changed in the 2010s and 2020s in Fujian Province. In order to meet the requirements of high efficiency and envirofimental protection, the usage of clean coal technologies for power generating will be an inevitable option and the technologies will occupy the important position in Fujian power industry. This paper puts forward the staged targets and measures of developing and utilizing clean coal technologies, suggests that all government depotments related should give support and guarantee in policies and conditions, and welcome technical and economic cooperation at home and abroad, which is good for co-development of both parties.
文摘Wind energy is a pollution free and renewable resource widely distributed over China. Aimed at protecting the environment and enlarging application of wind energy, a new approach to application of wind energy by using compressed air power to some extent instead of electricity put forward. This includes: explaining the working principles and charac-teristics of the wind energy-compressed air power system; discussing the compatibility of wind energy and compressor capacity; presenting the theoretical model and computational simulation of the system. The obtained compressor capacity vs wind power relationship in certain wind velocity range can be helpful in the designing of the wind power-compressed air system. Results of investigations on the application of high-pressure compressed air for pressure reduction led to conclusion that pressure reduction with expander is better than the throttle regulator in energy saving.
文摘A clean technology in thermal power station by adding of limestone into coal for getting the co-melted compounds was studied. Comparing with conventional technology, the quantity of ash discharged is decreased from 85% to 15%, the water consumption is 80% less than traditional method. The slag discharged could be used as raw materials for cement and bricks. In addition, the SO2 content is decreased as well.
文摘New research developments suggest that nuclear reactors using fusion may enter the market sooner than imagined even for mobile applications, like merchant ship propulsion and remote power generation. This article aims at pointing such developments and how they could affect nuclear fusion. The method is enumerating the main nuclear reactors concepts, identifying new technological or theoretical developments useful to nuclear field, and analysing how new recombination could affect feasibility of nuclear fusion. New technologies or experimental results do not always work the way people imagine, being better or worse for intended effects or even bringing completely unforeseen effects. Results point the following designs could be successful, in descending order of potential: aneutronic nuclear reactions using lattice confinement, aneutronic nuclear reactions using inertial along magnetic confinement, hybrid fission-lattice confinement fusion, and fission reactions.
