Separating emitted dust from the total suspension in airflow based on the characteristics of PM10 vertical concentration profiles on a Gobi surface in northwestern China

During aeolian processes,the two most critical factors related to dust emissions are soil particle and aggregate saltation,which greatly affect the vertical profiles of near-surface dust concentrations.In this study,we measured PM10 concentrations at four different heights(0.10,0.50,1.00 and 2.00 m)with and without continuous and simultaneous aeolian saltation processes on a Gobi surface in northwestern China from 31 March to 10 April,2017.We found that the vertical concentration profiles of suspended PM10 matched the log-law model well when there was no aeolian saltation.For the erosion process with saltation,we divided the vertical concentration profiles of PM10 into the saltation-affected layer and the airflow-transport layer according to two different dust sources(i.e.,locally emitted PM10 and upwind transported PM10).The transition height between the saltation-affected layer and the airflow-transport layer was not fixed and varied with saltation intensity.From this new perspective,we calculated the airflow-transport layer and the dust emission rate at different times during a wind erosion event occurred on 5 April 2017.We found that dust emissions during wind erosion are primarily controlled by saltation intensity,contributing little to PM10 concentrations above the ground surface compared to PM10 concentrations transported from upwind directions.As erosion progresses,the surface supply of erodible grains is the most crucial factor for saltation intensity.When there was a sufficient amount of erodible grains,there was a significant correlation among the friction velocity,saltation intensity and dust emission rate.However,when supply is limited by factors such as surface renewal or an increase in soil moisture,the friction velocity will not necessarily correlate with the other two factors.Therefore,for the Gobi surface,compared to limiting dust emissions from upwind directions,restricting the transport of suspended dust in its path is by far a more efficient and realistic option for small areas that are often exposed to dust storms.This study provides some theoretical basis for correctly estimating PM10 concentrations in the Gobi areas.

MATHEMATICAL MODELS OF NITROGEN CONCENTRATION PROFILE OF ION NITRIDED LAYERS AND COMPUTER SIMULATION

The mathematical models of the kinetics of the layer growth at different ion nitriding condi- tions of armco iron.steels 45,40Cr,42CrMo and 38CrMoAl have been established.Based on these models the expression of nitrogen concentration profile of ion nitrided layers have been deduced with profile simulating method.They are C_=C_(min)^+(P_4)/(ξ_1-x)+(P_5)/(ξ_(10)~2)(ξ_1-x)~2 C_(γ′)=C_(min)^(γ′)+(P_1)/(ξ_(21))(ξ_2-x)+(P_2)/(ξ_(21)~2)(ξ_2-x)~2 C_α=C_(min)~α+(C_(33))/(C_(33))/(ξ_(32))(ξ_3-x)~3 Using these models,the kinetics of layer growth and the nitrogen concentration profile of ion nitrided layers were sinulated on Apple-Ⅱ computer.Results show that the simulated curves coincide quite well with the experimental data.

Effect of Aluminum and Silicon on Transformation Induced Plasticity of the TRIP Steel

With the sublattice model, equilibrium compositions of ferrite (a) and austenite (7 ) phases, as well as the volume percent of austenite (7) at 780℃ in different TRIP steels were calculated. Concentration profiles of carbon, Mn, Al and Si in the steels were also estimated under the lattice fixed frame of reference so as to understand the complex mechanical behavior of TRIP steels after different isothermal bainitic transformation treatments. The effect of Si and Mn on transformation induced plasticity (TRIP) was discussed according to thermodynamic and kinetic analyses. It is recognized that Al also induces phase transformation in the steels but its TRIP effect is not as strong as that of Si.

Computer-Aided Design of Some Advanced Steels and Cemented Carbides

Thermodynamic and kinetic study on TRIP （transformation induced plasticity） steels, cemented carbides and mold steel for plastics were carried out in order to design modern advanced materials. With the sublattice model, equilibrium compositions of ferrite and austenite phases in TRIP steels, as well as volume fraction of austenite at inter-critical temperatures for different time were calculated. Concentration profiles of carbon, manganese, aluminum and silicon in the steels were also estimated in the lattice fixed frame of reference. The effect of Si and Mn on TRIP was discussed according to thermodynamic and kinetic analyses. In order to understand and produce the graded nanophase structure of cemented carbides, miscellaneous phases in the M-Co-C （M= Ti, Ta, Nh） systems and Co-V-C system were modeled. Solution parameters and thermodynamic： properties were listed in detail. The improvement of machining behavior of prehardened mould steel for plastics was obtained by computer-aided composition design. The results showed that the matrix composition of large-section prehardened mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the composition control by the aid of Thermo-Calc software package minimizes the amount of detrimental oxide inclusion. In addition, the modification of calcium was optimized in composition design.

Salt transport in polymeric pervaporation membrane

The salt transport in a PEBA membrane used in pervaporative desalination was studied.The concentration profile of salt in the membrane during pervaporation was investigated experimentally using a multilayer membrane.The salt was found to be sorbed in the membrane but was not removed during the pervaporative desalination process,and the salt concentration in the membrane varied linearly with position.High purity water was obtained as the permeate as long as the permeate side was kept dry under vacuum.The accumulated salt uptake in the membrane follows the order of MgCl2 N NaCl N Na2 SO4.The solubility of salt in the membrane follows the order of MgCl2 N NaCl N Na2 SO4.Both the permeability and diffusivity of salt in the membrane follow the order of NaCl N MgCl2 N Na2 SO4.The permeability of salt in the membrane is not influenced by the feed salt concentration.It is mainly determined by the diffusion coefficients.

Generalized Van der Waals Equation for Liquid-Vapor Equilibria in a Stationary Gravitational Field

The behavior of liquids undergoing phase transition in the gravitational field is studied by considering the generalized Van der Waals equation. Considering the two simple models for liquid-vapor boundary of a pure classical fluid, the generalized Van der Waals equation shows how the three critical parameters (critical temperature, critical volume and critical pressure), suffice to describe the reduced state parameters (reduced temperature, reduced volume and reduced pressure), the concentration profile and the liquid-vapor boundary position, which can be used to observe transition phenomenon. This model shows how the form of the equation can influence the vertical phase separation induced by the stationary gravitational field, and on the gas condensation effects.

Application of Finite Fourier Transform and Similarity Approach in a Binary System of the Diffusion of Water in a Polymer

This paper describes the method of two important mathematical techniques used in chemical engineering applications. Solving a mass transfer problem, weather in finite or semi-infinite domain, may seem difficult without the practice of Finite Fourier Transform (FFT) and Similarity Transformation. Finite systems refer to any closed system that has a specific boundary that can be determined. For example, polymer sheets, membranes, storage tanks, oil reservoirs and a human stomach are determined to be finite systems where FFT is applicable to derive expressions for concentration profiles of the materials in the system. However, Similarity Transformation method is used to identify the concentration profile in semi-infinite systems that have no limits. It has been approved that we may also use the similarity procedure for finite systems since our results are almost the same. Methodologies of both techniques have been discussed thoroughly in order to apply them to a water-polymer diffusion system for the determination of the concentration of water in a polymer sheet of PET. Discussion and comparison between FFT and similarity is included to illustrate the power of each mathematical procedure in predicting and modeling mass concentrations.

Effects of elevated atmospheric CO_2 concentration and temperature on the soil profile methane distribution and diffusion in rice–wheat rotation system

The aim of this experiment was to determine the impacts of climate change on soil profile concentrations and diffusion effluxes of methane in a rice-wheat annual rotation ecosystem in Southeastern China. We initiated a field experiment with four treatments：ambient conditions（CKs）, CO2 concentration elevated to - 500 μmol/mol（FACE）,temperature elevated by ca. 2°C（T） and combined elevation of CO2 concentration and temperature（FACE ＋ T）. A multilevel sampling probe was designed to collect the soil gas at four different depths, namely, 7 cm, 15 cm, 30 cm and 50 cm. Methane concentrations were higher during the rice season and decreased with depth, while lower during the wheat season and increased with depth. Compared to CK, mean methane concentration was increased by 42%, 57% and 71% under the FACE, FACE ＋ T and T treatments, respectively, at the 7 cm depth during the rice season（p 〈 0.05）. Mean methane diffusion effluxes to the 7 cm depth were positive in the rice season and negative in the wheat season, resulting in the paddy field being a source and weak sink, respectively. Moreover, mean methane diffusion effluxes in the rice season were 0.94, 1.19 and 1.42 mg C/（m^2·hr） in the FACE,FACE ＋ T and T treatments, respectively, being clearly higher than that in the CK. The results indicated that elevated atmospheric CO2 concentration and temperature could significantly increase soil profile methane concentrations and their effluxes from a rice-wheat field annual rotation ecosystem（p 〈 0.05）.

Generation of Linear and Parabolic Concentration Gradients by Using a Christmas Tree-Shaped Microfluidic Network

This paper describes a simple method of generating concentration gradients with linear and parabolic profiles by using a Christmas tree-shaped microfluidic network.The microfluidic gradient generator consists of two parts：a Christmas tree-shaped network for gradient generation and a broad microchannel for detection.A two-dimensional model was built to analyze the flow field and the mass transfer in the microfluidic network.The simulating results show that a series of linear and parabolic gradient profiles were generated via adjusting relative flow rate ratios of the two source solutions（R_L^2≥0.995 and _PR^2≥0.999）,which could match well with the experimental results（R_L^2≥0.987 and _PR^2≥0.996）.The proposed method is promising for the generation of linear and parabolic concentration gradient profiles,with the potential in chemical and biological applications such as combinatorial chemistry synthesis,stem cell differentiation or cytotoxicity assays.

Vertical Distribution Characteristics of PM2.5 Observed by a Mobile Vehicle Lidar in Tianjin, China in 2016

We present mobile vehicle lidar observations in Tianjin, China during the spring, summer, and winter of 2016. Mobile observations were carried out along the city border road of Tianjin to obtain the vertical distribution characteristics of PM2.5. Hygroscopic growth was not considered since relative humidity was less than 60% during the observation experiments. PM2.5 profile was obtained with the linear regression equation between the particle extinction coefficient and PM2.5 mass concentration. In spring, the vertical distribution of PM2.5 exhibited a hierarchical structure. In addition to a layer of particles that gathered near the ground, a portion of particles floated at 0.6–2.5-km height. In summer and winter, the fine particles basically gathered below 1 km near the ground. In spring and summer, the concentration of fine particles in the south was higher than that in the north because of the influence of south wind. In winter, the distribution of fine particles was opposite to that measured during spring and summer. High concentrations of PM2.5 were observed in the rural areas of North Tianjin with a maximum of 350 μg m^–3 on 13 December2016. It is shown that industrial and ship emissions in spring and summer and coal combustion in winter were the major sources of fine particles that polluted Tianjin. The results provide insights into the mechanisms of haze formation and the effects of meteorological conditions during haze–fog pollution episodes in the Tianjin area.

CALCULATION MODELS FOR THE SUSPENDED SEDIMENT TRANSPORT RATE

The calculation accuracy of the suspended sediment transport rate relies on that of the vertical distribution of the particle concentration,the particle velocity distribution and the reference concentration.In view of the limitations of the previons formulas for both the velocity and the concentration distributions,general expressions are introduced to the calculation of sus- pended sediment transport rate.Based on these analyses,a simple and practical calculation model is given in the present paper.