Construction and Optimization of English Linguistic System in the Context of Multi-dimensional Perspective and Interactive Teaching

With the improvement of the quality education in our country, the teaching reform of college English teaching has been carried out. In the college English teaching system, we need the network-based autonomous teaching mode, and effective evaluation system of English teaching is also necessary. A complete set of teaching evaluation system can truly reffect the teaching effect, and can promote the optimization of teaching activities as well. Therefore, in order to realize the effectiveness of English teaching and to expand the diversifi ed teaching mode, we need to build a complete set of English language system. Classroom teaching evaluation is one of the effective means to improve the teaching efficiency, which reffects the characteristics of college English courses. After the digitalization of the teaching methods, the network information produced in the teaching and management has obvious characteristics of large data. The optimized evaluation system of college English classroom teaching has realized the diversifi cation of evaluation subjects.

Construction and Optimization on Environmental Protection under the Background of Species Diversity and Green Ecology

In this paper, we conduct research on the construction and optimization on environmental protection under the background of species diversity and green ecology. In scope, the environmental policies include pollution control policies, ecological conservation policies and basic international environmental policies which should be considered based on the following aspects. （1） The urban environment issue possibly emerges in the urban inside and outside interactions, thus the government to the ecological environment must pay attention to the sector coordination, and even must global footprint from the national and criterion consideration. （2） Environmental protection is not only adapted to the needs of the environment through the transformation, but stressed that ecological construction, that is, to promote the coordination between mankind and the natural environment. Development and protection are regional which should be global and intertwined.

Optimal construction method and demonstration application of multi-in-one station grounding system

Mutual influence may be driven by different models and operating mechanisms of grounding systems in multi-in-one substations.Even equipment damage and personal injury will occur in the event of a short-circuit or lightning strike.To meet the construction requirements of different multi-in-one substations,two typical application modes of grounding systems in multi-in-one substations are analyzed in this paper:plane and longitudinal layout schemes.First,the safety index and withstand voltage of secondary equipment in multi-in-one substations are introduced.Second,the plane layout scheme of grounding grids is examined.Based on a 35-kV multi-in-one substations in Shanghai,it was verified that the overall grounding grid needs to be laid to meet the safety of secondary equipment in the station.Finally,considering that it is feasible to rebuild the upper layer of a substation,the longitudinal layout scheme of the grounding grid in multi-in-one substations is also examined.Safety assessment is carried out in terms of aspects such as short-circuits and lightning strikes,and relevant optimization construction methods are analyzed.In this study,a real 35-kV substation in Shanghai was selected as an example.Simulation and field tests based on Current Distribution,Electromagnetic Fields,Grounding and Soil Structure Analysis(CDEGS)software verified that the proposed construction scheme can achieve safe operation of multi-in-one substations.This construction idea can also serve as a reference for the future construction of multi-in-one substations.

OPTIMAL DESIGN OF A 6-AXIS FORCE TRANSDUCER BASED ON STEWART PLATFORM RELATED TO SENSITIVITY ISOTROPY

The design method of a 6-axis force robot's transducer based on the Stewartplatform is detailed. For this purpose, the sensitivity isotropy evaluation criteria of thetransducer are defined, and by the aid of computer, the relationships between the criteria and theparameters of all the transducers based on the Stewart platform are investigated within thegeometric model of the solution space, which can provide the theoretical background for the optimalconstruction design of the 6-axis force transducer related to the sensitivity isotropy.

Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle

Analogizing with the heat conduction process, the entransy dissipation extremum principle for thermal insulation process can be described as: for a fixed boundary heat flux (heat loss) with certain constraints, the thermal insulation process is optimized when the entransy dissipation is maximized (maximum average temperature difference), while for a fixed boundary temperature, the thermal insulation process is optimized when the entransy dissipation is minimized (minimum average heat loss rate). Based on the constructal theory, the constructal optimizations of a single plane and cylindrical insulation layers as well as multi-layer insulation layers of the steel rolling reheating furnace walls are carried out for the fixed boundary temperatures and by taking the minimization of entransy dissipation rate as optimization objective. The optimal constructs of these three kinds of insulation structures with distributed thicknesses are obtained. The results show that compared with the insulation layers with uniform thicknesses and the optimal constructs of the insulation layers obtained by minimum heat loss rate, the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate are obviously different from those of the former two insulation layers; the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate can effectively reduce the average heat loss rates of the insulation layers, and can help to improve their global thermal insulation performances. The entransy dissipation extremum principle is applied to the constructal optimizations of insulation systems, which will help to extend the application range of the entransy dissipation extremum principle.

Generalized constructal optimization of strip laminar cooling process based on entransy theory

A strip laminar cooling process is investigated in this paper. Entransy theory and generalized constructal optimization are introduced into the optimization. Total water flow amount(WFA) in the laminar cooling zone(LCZ) and complex function are taken as the constraint and optimization objective, respectively. The entransy dissipation(ED) and maximum temperature different(MTD) of the strip are simultaneously considered in the complex function. WFA distributions of the headers in the LCZ are optimized. The effects of the total WFA, strip thickness and cooling water temperature on the optimal results are analyzed.The optimal cooling scheme is the eleventh cooling mode for the considered total 257 cooling schemes, and the complex function,ED and MTD of the strip are decreased by 11.59%, 5.59% and 17.58% compared with the initial cooling scheme, respectively.The total WFA and strip thickness have the obvious influences on the optimal cooing scheme, but the cooling water temperature has no influence in the parameter analysis range of this paper. The "generalized optimal construct" derived by minimum complex function shows a compromise between the energy retention and quality of the strip.

Molten steel yield optimization of a converter based on constructal theory

Constructal theory is introduced into the molten steel yield maximization of a converter in this paper. For the specific total cost of materials, generalized constructal optimization of a converter steel-making process is performed. The optimal cost distribution of materials is obtained, and is also called as "generalized optimal construct". The effects of the hot metal composition contents, hot metal temperature, slag basicity and ratio of the waste steel price to the sinter ore price on the optimization results are analyzed.The results show that the molten steel yield after optimization is increased by 5.48% compared with that before optimization when sinter ore and waste steel are taken as the coolants, and the molten steel yield is increased by 6.84% when only the sinter ore is taken as the coolant. It means that taking sinter ore as coolant can improve the economic performance of the converter steelmaking process. Decreasing the contents of the silicon, phosphorus and manganese in the hot metal can increase the molten steel yield. The change of slag basicity affects the molten steel yield a little.

Research on the Optimization Approach for Cargo Oil Tank Design Based on the Improved Particle Swarm Optimization Algorithm

Based on the improved particle swarm optimization(PSO) algorithm,an optimization approach for the cargo oil tank design(COTD) is presented in this paper.The purpose is to design an optimal overall dimension of the cargo oil tank(COT) under various kinds of constraints in the preliminary design stage.A non-linear programming model is built to simulate the optimization design,in which the requirements and rules for COTD are used as the constraints.Considering the distance between the inner shell and hull,a fuzzy constraint is used to express the feasibility degree of the double-hull configuration.In terms of the characteristic of COTD,the PSO algorithm is improved to solve this problem.A bivariate extremum strategy is presented to deal with the fuzzy constraint,by which the maximum and minimum cargo capacities are obtained simultaneously.Finally,the simulation demonstrates the feasibility and effectiveness of the proposed approach.