Effect of Cooling Methods on Methane Conversion via Dielectric-Barrier Discharges

Effects of cooling methods on stability and methane conversion rate using dielectric-barrier discharges （DBD） were systematically investigated in this article. The results showed that the methane conversion rate was as high as 44.43% in a pure methane system at a flow rate of 100 mL·min^-1 and an input power of 234.2 W with air cooling. A dark greenish and soft film-like carbon was deposited on the outer surface of quartz tube when the outer electrode was watercooled, which decreased the methane conversion. With air cooling of inner electrode the selectivity of C2 hydrocarbons was higher than that with other cooling methods, while the C3 hydrocarbons had higher selectivity with flowing water cooling. Cooling the inner electrode could restrain the carbon deposition, but would decrease the methane conversion rate. The stability of both reaction and plasma operation can be improved through cooling the reactor. From thermodynamic analysis, it was found that the effective collisions frequency among the reactant molecules and free electrons （e^-） increased with temperature, which in turn led to a higher methane conversion rate and a change in the distribution of products.

Microstructure and Property of Hypereutectic High Chromium Cast Iron Prepared by Slope Cooling Body-Centrifugal Casting Method

In this paper, the ring-type ingot of hypereutectic high Cr cast iron was obtained by slope cooling bodycentrifugal casting method （SC-CCM）, and its microstructure and impact toughness were investigated, respectively. The results indicated that, first, the primary carbides in the microstructure are prominently finer than those in the hypereutectic high Cr cast iron prepared by conventional casting method. Second, in the ring-type ingot, the primary carbides near radial outer field are finer than those near radial inner field; furthermore, there is dividing field in the microstructure. Finally, the impact toughness values of the specimens impacted on the radial outer face and on the radial inner face are improved respectively about 36% and 138% more than that of the hypereutectic high Cr one prepared by conventional casting method.

Numerical simulation of the preparation of semi-solid metal slurry with damper cooling tube method

In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.

Influence of two-step cooling method on magnetic properties of Fe_(82)Mo_7B_(10)Cu_1 nanocrystalline alloy

Soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy were studied as a function of cooling condition. The results show that higher permeability and relaxation frequency can be obtained by the two-step cooling method, and the pinning field of the sample obtained by this method is smaller than that of the furnace-cooled and water-quenched samples. This phenomenon was interpreted in terms of internal stress and the magnetic ordering of the residual amorphous phase. The two-step cooling treatment is an effective way to improve the soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy.

Experimental study on mechanical properties of granite under different cooling methods after thermal treatment

Static uniaxial compression tests were conducted on 16 granite specimens after thermal treatment using a heating device and an electro-hydraulic servo pressure-testing machine. The effects of air cooling and water cooling on the physical and mechanical properties of the high-temperature granite specimens were studied. Test results showed that the longitudinal wave velocities of the high-temperature specimens gradually decreased after they were cooled by water and air. The peak stress and elastic modulus of the samples decreased gradually with an increase in temperature, whereas their peak strain increased gradually. The effects of peak stress and peak strain were considerably more evident when cooling by water than by air. This result demonstrated that the thermal cracking of the granite specimens, and consequently, their internal micro-fractures, further developed when the specimens were cooled by water.

Preparation of Thermosensitive Microcapsules Containing Water Soluble Powder by Melting Dispersion Cooling Method

It was tried to prepare the thermosensitive microcapsules containing the water soluble solid powder by the melting dispersion cooling method and to establish the optimum preparation conditions. As a model water soluble solid powder, sodium hydrogen carbonate was adopted in order to generate carbon dioxide gas and as a thermosensitive shell material, olefin resin with the melting point of ca. 40°C was used. In the experiment, the concentration of olefin resin in the shell material solution was mainly changed together with the concentrations of the oil soluble surfactant species and the α-tocopherol as a modifier of shell. Addition of α-tocopherol into the shell material solution could prevent the core from breaking away during the microencapsulation process and result in the higher microencapsulation efficiency, because the dispersion stability of solid powder in the shell material solution could be increased due to the increase in affinity between the shell material solution and solid powder. Also, the microencapsulation efficiency increased with the concentration of olefin resin, became maximum at 50 wt% and then, decreased. The microcapsules were found to begin melting at 36°C and to generate carbon dioxide gas.

Preparation of Microcapsules Containing Aqueous Solution of Azur B with Melting Dispersion Cooling Method and Application to DNA Amplification Detector

Microcapsules containing the aqueous solution of Azur B of a water soluble dye were prepared with the melting dispersion cooling method and applied to the amplification detector of plant DNA. Paraffin wax with melting temperature of 75°C was used as the shell material. In the experiment, the aqueous solution (W) of Azur B as the core material was dispersed in the melted paraffin wax (O) to form the (W/O) emulsion and then, the (W/O) emulsion was dispersed in the silicon oil (O’) as the continuous phase to form the (W/O)/O’ emulsion at 85°C. After formation of the (W/O)/O’ emulsion, the microcapsules were prepared by cooling the (W/O)/O’ emulsion to 50°C. The microcapsules were prepared by changing the concentration of oil soluble surfactant in the (W/O) emulsion and the volume of the (W/O) emulsion in the (W/O)/O’ emulsion. The microencapsulation efficiency increased with the concentration of oil soluble surfactant and finally became 100% under the optimum conditions. Furthermore, the microcapsules were melted down at temperature of 85°C to reveal the sharp thermal responsibility and to release the aqueous solution of Azur B. As a result, it was found that the microcapsules were able to be applied to the amplification detector of plant DNA by utilizing the reaction between DNA and Azur B.

Techno-Economic and Sustainability Analysis of Potential Cooling Methods in Irish Data Centres

11% of Irish electricity was consumed by data centres in 2020. The Irish data centre industry and the cooling methods utilised require reformative actions in the coming years to meet EU Energy policies. The resell of heat, alternative cooling methods or carbon reduction methods are all possibilities to conform to these policies. This study aims to determine the viability of the resell of waste heat from data centres both technically and economically. This was determined using a novel application of thermodynamics to determine waste heat recovery potential in Irish data centres, and the current methods of heat generation for economical comparison. This paper also explores policy surrounding waste heat recovery within the industry. The Recoverable Carnot Equivalent Power (RCEP) is theoretically calculated for the three potential cooling methods for Irish data centres. These are air, hybrid, and immersion cooling techniques. This is the maximum useable heat that can be recovered from a data centre rack. This study is established under current operating conditions which are optimised for cooling performance, that air cooling has the highest potential RCEP of 0.39 kW/rack. This is approximately 8% of the input electrical power that can be captured as useable heat. Indicating that Irish data centres have the energy potential to be heat providers in the Irish economy. This study highlighted the technical and economic aspects of prevalent cooling techniques and determined air cooling heat recovery cost can be reduced to 0.01 €/kWhth using offsetting. This is financially competitive with current heating solutions in Ireland.

Numerical simulation of HP rotor cooling configuration using parameterized method

This paper implemented cooling configuration design on certain gas turbine HP rotor using parameterized method.It is convenient for complicated gas turbine blade modeling using parameters and also benefit for the geometry modify in later period.Parameterized modeling is the foundation of air cooling turbine blade design method engineering application.Mesh quality can be awarded when generated complicated cooling configuration blade grids,and also the increase of calculation error can arise by many mesh blocks.Film cooling and serpentine passage can effectively enhance the cooling effectiveness and protect blade.

Thermal field in water pipe cooling concrete hydrostructures simulated with singular boundary method

The embedded water pipe system is often used as a standard cooling technique during the construction of large-scale mass concrete hydrostructures. The prediction of the temperature distribution considering the cooling effects of embedded pipes plays an essential role in the design of the structure and its cooling system. In this study, the singular boundary method, a semi-analytical meshless technique, was employed to analyze the temperature distribution. A numerical algorithm solved the transient temperature field with consideration of the effects of cooling pipe specification, isolation of heat of hydration, and ambient temperature. Numerical results are verified through comparison with those of the finite element method, demonstrating that the proposed approach is accurate in the simulation of the thermal field in concrete structures with a water cooling pipe.

Analysis of fixation method of fuel assembly for lead-alloy cooled reactor

As a potential candidate for generation IV reactors, lead-alloy cooled reactor has attracted much attentions in recent years. The China LEAd-based research Reactor(CLEAR) is proposed as the primary choice for the accelerator driven subcritical system project launched by Chinese Academy of Sciences. Lead-bismuth eutectic(LBE) is selected as the coolant of CLEAR owing to its efficient heat conductivity properties and high production rate of neutrons. In order to compensate the buoyancy due to the high density of lead-alloy, fixation methods of fuel assembly(FA) have become a research hotspot worldwide. In this paper, we report an integrated system of ballast and fuel element for CLEAR FA. It guarantees the correct positioning of each FA in normal and refueling operations. Force calculation and temperature analysis prove that the FA will be stable and safe under CLEAR operation conditions.

New Measurement Method for Direct Cooled Power Electronic with Transmission Fluids

Power Electronic (PE) will play an essential role in future drive concepts. Nowadays, mainly water/glycol-based cooling media are used to cool PE. Due to their high electrical conductivity (EC), water/glycol-based coolants cannot be used for direct cooling of the electrical components. Direct cooling concepts with dedicated transmission fluids show potential usage of fluid in direct contact with electrified parts. This results in special requirements for the fluids and materials. The aimed action as a coolant requires a defined measurement and characterization of fluid properties and heat transfer in order to assess the cooling ability of a fluid. The purpose of the work was to develop a new measurement setup based on the thermal transient method with which the thermal requirements of cooling fluids for a direct cooling concept can be assessed. With this method, relevant transmission fluids have been tested and the thermal performance compared to indirect cooling effect of water/glycol is discussed. The result of the work is that the measurement method is very well suited for the application-related evaluation of the fluids. Direct oil cooling with transmission fluids could increase heat transfer coefficient by a factor of 3 to 8, compared to the indirect cooing with water/glycol as cooling media.

Analysis of the factors affecting thermal evolution of hot rolled steel during coil cooling

The thermal evolution of steel coil during cooling was simulated and investigated by the use of in-house Q-CSP software. The dependence of the thermal evolution of steel coil on cooling methods, temperature distribution of the strip before coiling, coil size and steel grades was also discussed. The study plays a significant role in helping steel makers to better understand and control the cooling process.

Permafrost Characteristics of the Qinghai-Tibet Plateau and Methods of Roadbed Construction of Railway

Permafrost along the Qinghai-Tibet railway is featured by abundant ground ice and high ground temperature. Under the influence of climate warming and engineering activities, the permafrost is under degradation process. The main difficulty in railway roadbed construction is how to prevent thawing settlement caused by degradation of permafrost. Therefore the proactively cooling methods based on controlling solar radiation, heat conductivity and heat convection were adopted instead of the traditional passive methods, which is simply increasing thermal resistance. The cooling methods used in the Qinghai-Tibet railway construction include sunshine-shielding roadbeds, crushed rock based roadbeds, roadbeds with rock revetments, duct-ventilated roadbeds, thermosyphon installed roadbeds and land bridges. The field monitored data show that the cooling methods are effective in protecting the underlying permafrost, the permafrost table was uplifted under the embankments and therefore the roadbed stability was guaranteed.

Influence of cooling speed on the physical and mechanical properties of granite in geothermal-related engineering

In deep-earth engineering,the high earth temperature can significantly affect the rock's mechanical properties,especially when the rock is cooled during the construction process.Accordingly,whether the cooling speed affects the mechanical and physical properties of rocks is worth to be investigated.The present study explored the influence of the cooling rate on the physical and chemical properties of granite heated at 25–800°C.The mechanical and physical properties involved in this study included uniaxial compression strength,peak strain,modulus,P-wave velocity,mass and volume,the change of which could reflect the sensitivity of granite to the cooling rate.Acoustic emission(AE)monitoring,microscopic observation,and X-ray diffraction(XRD)are used to analyze the underlying damage mechanism.It is found that more AE signals and large-scale cracks are accounted for based on the b-value method when the specimens are cooled by water.Furthermore,the microscopic observation by polarized light microscopy indicates that the density,opening degree,and connectivity of the cracks under water cooling mode are higher than that under natural cooling mode.In addition,the XRD illustrates that there is no obvious change in mineral content and diffraction angle at different temperatures,which confirms that the change of mechanical properties is not related to the chemical properties.The present conclusion can provide a perspective to assess the damage caused by different cooling methods to hot rocks.

Exact results on cavity cooling in a system of a two-level atom and a cavity field

Using the algebraic dynamical method, this paper investigates the laser cooling of a moving two-level atom coupled to a cavity field. Analytical solutions of optical forces and the cooling temperatures are obtained. Considering Rb atoms as an example, it finds that the numerical results are relevant to the recent experimental laser cooling investigations.

Thermal Modeling of Thermosyphon Integrated Heat Sink for CPU Cooling

A thermal model has been developed to study the thermal behavior of Thermosyphon integrated Heat Sink during CPU cooling. An Indirect cooling module has been experimentally studied and analyzed under steady state condition for both natural and forced convection. The thermal model is employed to determine the actual heat transfer and the effectiveness of the present model and compared it with the conventional cooling method and found that there is an appreciable improvement in the present model.

Design of a Prototype EHD Air Pump for Electronic Chip Cooling Applications

This paper presents the design,optimization and fabrication of an EHD air pump intended for high-power electronic chip cooling applications.Suitable high-voltage electrode configurations were selected and studied,in terms of the characteristics of the generated electric field,which play an important role in ionic wind flow.For this purpose,dedicated software is used to implement finite element analysis.Critical design parameters,such as the electric field intensity,wind velocity,current flow and power consumption are investigated.Two different laboratory prototypes are fabricated and their performances experimentally assessed.This procedure leads to the fabrication of a final prototype,which is then tested as a replacement of a typical fan for cooling a high power density electronic chip.To assist towards that end,an experimental thermal testing setup is designed and constructed to simulate the size of a personal computer’s CPU core of variable power.The parametric study leads to the fabrication of experimental single-stage EHD pumps,the optimal design of which is capable of delivering an air flow of 51 CFM with an operating voltage of 10.5 kV.Finally,the theoretical and experimental results are evaluated and potential applications are proposed.

High efficient Raman sideband cooling and strong three-body recombination of atoms

We report a highly efficient three-dimensional degenerated Raman sideband cooling(3D dRSC)that enhances the loading of a magnetically levitated optical dipole trap,and observe the strong atom loss due to the three-body recombination.The 3D dRSC is implemented to obtain 5×10^(7)Cs atoms with the temperature of~480 nK.The cold temperature enables 1.8×10^(7)atoms loaded into a crossed dipole trap with an optimized excessive levitation magnetic gradient.Compared to the loading of atoms from a bare magneto-optical trap or the gray-molasses cooling,there is a significant increase in the number of atoms loaded into the optical dipole trap.We derive for the three-body recombination coefficient of L_(3)=7.73×10^(-25)cm^(6)/s by analyzing the strong atom loss at a large scattering length of 1418 Bohr radius,and discover the transition from the strong three-body loss to the dominant one-body loss.Our result indicates that the lifetime of atoms in the optical dipole trap is finally decided by the one-body loss after the initial strong three-body loss.

Experimental Analysis of A Cooling System for Wind-Driven Generator Stator

A novel cooling system with cooling channels is proposed for the stator of 3MW wind-driven generator.An experimental platform is built to investigate the performance of the cooling system with different loads.At30%,50% or 80% generator loads,the temperatures meet the design requirement.However,it is a little over the requirement at 100%load,duo to experimental errors and some unknown thermal resistances.In the test at 100%load,the developing trends of the parameters of these two generators are similar and only minor differences occurs when they reach steady state our work can be benefit for the design and improvement of MW wind-driven generator cooling solutions.