Progress in experimental models to investigate the in vivo and in vitro antidiabetic activity of drugs

Diabetes mellitus is one of the world's most prevalent and complex metabolic disorders,and it is a rapidly growing global public health issue.It is characterized by hyperglycemia,a condition involving a high blood glucose level brought on by deficiencies in insulin secretion,decreased activity of insulin,or both.Prolonged effects of diabetes include cardiovascular problems,retinopathy,neuropathy,nephropathy,and vascular alterations in both macro-and micro-blood vessels.In vivo and in vitro models have always been important for investigating and characterizing disease pathogenesis,identifying targets,and reviewing novel treatment options and medications.Fully understanding these models is crucial for the researchers so this review summarizes the different experimental in vivo and in vitro model options used to study diabetes and its consequences.The most popular in vivo studies involves the small animal models,such as rodent models,chemically induced diabetogens like streptozotocin and alloxan,and the possibility of deleting or overexpressing a specific gene by knockout and transgenic technologies on these animals.Other models include virally induced models,diet/nutrition induced diabetic animals,surgically induced models or pancreatectomy models,and non-obese models.Large animals or non-rodent models like porcine(pig),canine(dog),nonhuman primate,and Zebrafish models are also outlined.The in vitro models discussed are murine and human beta-cell lines and pancreatic islets,human stem cells,and organoid cultures.The other enzymatic in vitro tests to assess diabetes include assay of amylase inhibition and inhibition ofα-glucosidase activity.

Effects of Stylosanthes scabra Forage Supplementation on in Vitro Gas Production and Fiber Degradation of Eragrostis Grass Hay

Natural pastures constitute a major component of ruminant livestock feed, and are the most cost-effective feed resource available for smallholder subsistence farmers. However, this feed resource does not meet animal nutritional requirement due to deficiency in nitrogen, energy and minerals. In addition, at maturity lignification is the major concern since it reduces digestibility and contributes to methane emission. Thus, the objective of this study was to evaluate the effect of supplementing low-quality Eragrostis grass hay with five (9281, 11,252, 11,255, 11,595 and 11,604) selected Stylosanthes scabra accessions on in vitro ruminal fermentation and neutral detergent fiber degradation. Therefore, in vitro study was conducted on grass hay, accessions and the mixture of grass hay with each accession included at two (15%, 30%) levels. The substrates (grass hay, accessions and the mixtures) were incubated in separate serum bottles for 72 h. Neutral detergent fiber (NDF) of the accessions ranged from 300 to 350 g/kg DM with crude protein (CP) value ranging from 177.5 to 184.1 g/kg DM. Eragrostis grass hay had NDF value of 813 g/kg DM, with CP value of 34.3 g/kg DM. Grass hay fermented slowly, it took 30 h for grass hay to produce gas volume above 50 mL, while Stylosanthes scabra accessions took 12 h. Supplementing grass hay with accessions significantly improved fermentation. However, it was observed that 15% inclusion took 30 h to produce gas volume above 50 mL, whereas at 30% inclusions it took 24 h for accession 9281, 11,595 and 11,604. Accession 11,604 improve grass fermentation by almost three times the value of grass hay in 2 h. Grass hay supplemented with accession 11,604 at 30% had a positive associative effect and significantly improved NDF degradability. In conclusion, accession 11,604 may be fed strategically as forage supplement to low-quality forage for ruminants.

Evaluation of ruminal methane and ammonia formation and microbiota composition as affected by supplements based on mixtures of tannins and essential oils using Rusitec

Background Dietary supplements based on tannin extracts or essential oil compounds(EOC)have been repeatedly reported as a promising feeding strategy to reduce the environmental impact of ruminant husbandry.A previous batch culture screening of various supplements identified selected mixtures with an enhanced potential to mitigate ruminal methane and ammonia formation.Among these,Q-2(named after quebracho extract and EOC blend 2,composed of carvacrol,thymol,and eugenol)and C-10(chestnut extract and EOC blend 10,consisting of oregano and thyme essential oils and limonene)have been investigated in detail in the present study with the semi-continuous rumen simulation technique(Rusitec)in three independent runs.For this purpose,Q-2 and C-10,dosed according to the previous study,were compared with a non-supplemented diet(negative control,NC)and with one supplemented with the commercial EOC-based Agolin^(R) Ruminant(positive control,PC).Results From d 5 to 10 of fermentation incubation liquid was collected and analysed for pH,ammonia,protozoa count,and gas composition.Feed residues were collected for the determination of ruminal degradability.On d 10,samples of incubation liquid were also characterised for bacterial,archaeal and fungal communities by high-throughput sequencing of 16S rRNA and 26S ribosomal large subunit gene amplicons.Regardless of the duration of the fermentation period,Q-2 and C-10 were similarly efficient as PC in mitigating either ammonia(-37%by Q-2,-34%by PC)or methane formation(-12%by C-10,-12%by PC).The PC was also responsible for lower feed degradability and bacterial and fungal richness,whereas Q-2 and C-10 effects,particularly on microbiome diversities,were limited compared to NC.Conclusions All additives showed the potential to mitigate methane or ammonia formation,or both,in vitro over a period of 10 d.However,several differences occurred between PC and Q-2/C-10,indicating different mechanisms of action.The pronounced defaunation caused by PC and its suggested consequences apparently determined at least part of the mitigant effects.Although the depressive effect on NDF degradability caused by Q-2 and C-10 might partially explain their mitigation properties,their mechanisms of action remain mostly to be elucidated.

Effect of heat treatment on microstructure, mechanical properties and in vitro degradation behavior of as-extruded Mg-2.7Nd-0.2Zn-0.4Zr alloy

Mg-2.7Nd-0.2Zn-0.4Zr （mass fraction, %） alloy was designed for degradable biomedical material. The ingots of the alloy were solution treated and then hot extruded. The extruded rods were heat treated with aging treatment, solution treatment and solution＋aging treatment, respectively. Microstructures of the alloy were observed by optical microscopy （OM） and scanning electron microscopy （SEM）. Mechanical properties at room temperature were tested. In vitro degradation behavior of the alloy immersed in simulated body fluid was measured by hydrogen evolution and mass loss tests. The degradation morphologies of the alloy with and without degradation products were observed by SEM. The results show that the grains grow apparently after solution treatment. Solution treatment improves the elongation of as-extruded alloy significantly and decreases the strength, while aging treatment improves the strength and reduces the elongation of the alloy. The yield ratio is reduced by heat treatment. The in vitro degradation results of the alloy show that solution treatment on the as-extruded alloy results in a little higher degradation rate and aging treatment on the alloy can reduce degradation rate slightly.

Design,delivery and efficacy testing of therapeutic nucleic acids used to inhibit hepatitis C virus gene expression in vitro and in vivo

Despite major achievements in the treatment ofchronic hepatitis C with the combination ofinterferons and the nucleoside analog ribavirin themajority of patients with chronic hepatitis C virus(HCV) infection cannot be treated effectively.Toimprove this response rate we used antisensetechnologies to inhibit HCV translation as possibleadditional option for experimental treatment.Antisense oligodeoxynucleotides(ODN) are

A STUDY OF STRUCTURE AND PROPERTY CHANGES OF BIODEGRADABLE POLYGLYCOLIDE AND POLY(GLYCOLIDE-co-LACTIDE)FIBERS DURING PROCESSING AND IN VITRO DEGRADATION

Structure and properties of bioabsorbable polyglycolide (PGA) and poly(glycolide-co-lactide) (PGA-co-PLA)fibers were investigated during several industrial processing stages and in vitro degradation by means of wide-angle X-raydiffraction (WAXD), dynamic mechanical analysis (DMA) and mechanical property tests. In the orientation stage, the PGAfibers were found to have higher degrees of crystallinity than corresponding PGA-co-PLA samples produced under similarconditions. In the hot-stretching and post-annealing stages, after fibers were braided, PGA samples were found to gain morecrystallinity and higher T_g than PGA-co-PLA samples. The higher crystallinity in PGA fibers resulted in a slower rate ofdegradation. DMA results showed that a great deal of internal stress that was built during orientation and hot-stretchingstages was released in the post-annealing stage for a1l PGA and PGA-co-PLA samples. During earlier stages of in vitrodegradation, both PGA and PGA-co-PLA samples exhibited the typical cleavage-induced crystallization mechanism. Theheat shrinkage in the glass transition area was found to disappear after 6-8 days of degradation for all PGA and PGA-co-PLAsamples, indicating the amorphous portions of the polymers lost orientation after a short period in the buffer solution, mostlikely due to relaxation of the cleaved chains.

Double-layered osmotic pump controlled release tablets of actarit: In vitro and in vivo evaluation

The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.

Mechanical properties and corrosion behaviors of Mg-4Zn-0.2Mn-0.2Ca alloy after long term in vitro degradation

An extruded Mg-4Zn-0.2Mn-0.2Ca alloy was developed as potential biodegradable bone-plate due to its excellent biocompatibility.Long term in vitro immersion in Hank’s solution and bending test were used to evaluate the degradability and the mechanical integrity of the alloy.The results revealed that the degradation rate of the bone-plate increased in the first 7 days and then decreased with the prolonged immersion time before it finally reached a steady stage(about 0.84 mm/a)after immersion for 90 days.The bending strength after immersion for 60 days was 67.6 MPa,indicating that the bone-plate could support certain mechanical load after long term degradation.The formation of corrosion pits after degradation stemmed from the separation of the continuously distributed second phases from Mg matrix under the action of micro-galvanic couples.As a result,the mechanical performance of Mg-4Zn-0.2Mn-0.2Ca alloy was aggravated owing to the corrosion holes on its surface.

Insight into the preformed albumin corona on in vitro and in vivo performances of albumin-selective nanoparticles

Preformed albumin corona of albumin-nonselective nanoparticles(NPs)is widely exploited to inhibit the unavoidable protein adsorption upon intravenous administration.However,very few studies have concerned the preformed albumin corona of albumin-selective NPs.Herein,we report a novel type of albumin-selective NPs by decorating 6-maleimidocaproyl polyethylene glycol stearate(SA)onto PLGA NPs(SP NPs)surface,taking albuminnonselective PLGA NPs as control.PLGA NPs and SP NPs were prepared by emulsion-solvent evaporation method and the resultant NPs were in spherical shape with an average diameter around 180 nm.The corresponding albumin-coating PLGA NPs(PLGA@BSA NPs)and albumin-coating SP NPs(SP@BSA NPs)were formulated by incubating SP NPs or PLGA NPs with bovine serum albumin solution,respectively.The impact of albumin corona on particle characteristics,stability,photothermal effect,cytotoxicity,cell uptake,spheroid penetration and pharmacokinetics was investigated.In line with previous findings of preformed albumin coating,PLGA@BSA NPs exhibited higher stability,cytotoxicity,cell internalization and spheroid penetration performances in vitro,and longer blood circulation time in vivo than those of albumin-nonselective PLGA NPs,but albumin-selective SP NPs is capable of achieving a comparable in vitro and in vivo performances with both SP@BSA NPs and PLGA@BSA NPs.Our results demonstrate that SA decorated albumin-selective NPs pave a versatile avenue for optimizing nanoparticulate delivery without preformed albumin corona.

Development of cryptotanshinone-loaded pellets for angina chronotherapy:In vitro/in vivo prediction and evaluation

The clinical manifestations of variant angina is unevenly distributed during the 24 h, thusthe in vivo performance of drugs should be tailored according to the angina circadianrhythm. Cryptotanshinone(CTN) is one of the representative bioactive lipid-soluble com-ponents of Danshen which has been commonly used for cardiovascular diseases such asangina pectoris. The aim of this study was to develop a novel CTN sustained-released pel-lets(CTN-SRPs) to precisely synchronize the CTN plasma concentrations with predictedoccurrence of angina pectoris for angina chronotherapy. A deconvolution-based methodwas applied to develop and optimize the CTN-SRPs. The plasma concentration-time curveof CTN immediate-released formulation after oral administration in rats was used as theweight function. The predicted plasma concentration-time curve of CTN-SRPs simulatedaccording to the incidence of variant angina during 24 h was used as the response func-tion. Then the desired drug release profile of CTN-SRPs was calculated based on deconvo-lution using weight function and response function, and subsequently used for guiding theformulation optimization. CTN-SRPs were prepared with the combinations of PVP, polox-amer 127 and EC as matrix using fluidized bed technology. An orthogonal design was em-ployed to obtain the optimal formulation with its release profile similar with the desiredone. Pharmacokinetic studies validated that the actual plasma concentration-time curve ofthese optimized CTN-SRPs was similar with the predicted one. In addition, the percent er-rors(%PE) of CTN plasma concentrations in 8–12 h were less than 10%. In conclusion, thisdeconvolution-based method could be applied to adjust the in vivo performance of drugs forangina chronotherapy.

The antitumor effect of bromophenol derivatives in vitro and Leathesia nana extract in vivo

To investigate the antitumor effect of bromophenol derivatives in vitro and Leathesia nana extract in vivo, six bromophenol derivatives 6-（2,3-dibromo-4,5-dihydroxybenzyl）-2,3-dibromo-4,5-dihydroxy benzyl methyl ether （1）, （＋）-3-（2,3-dibromo-4,5-dihydroxyphenyl）-4-bromo-5,6-dihydroxy-1,3- dihydroisobenzofuran （2）, 3-bromo-4-（2,3-dibromo-4,5-dihydroxybenzyl）-5-methoxymethyl-pyrocatechol （3）, 2,2＇,3,3＇-tetrabromo-4,4＇,5,5＇-tetrahydroxy-diphenylmethane （4）, bis（2,3-dibromo-4,5-dihydroxybenzyl） ether （5）, 2,2＇,3-tribromo-3＇,4,4＇,5-tetrahydroxy-6＇-ethyloxymethyldiphenylmethane （6） were isolated from brown alga Leathesia nana, and their cytotoxicity were tested by MTF assays in human cancer cell lines A549, BGC-823, MCF-7, B16-BL6, HT-1080, A2780, Be17402 and HCT-8. Their inhibitory activity against protein tyrosine kinase （PTK） with over-expression of c-kit was analyzed also by ELISA. The antitumor activity of ethanolic extraction of Leathesia nana （EELN） was evaluated on S180-bearing mice. All compounds showed very potent cytotoxicity against all of the eight cancer cell lines with IC50 below 10 pg/mL. In PTK inhibition study, all bromophenol derivatives showed moderate inhibitory activity and compounds 2, 5 and 6 showed significant bioactivity with the inhibition ratio of 77.5%, 80.1% and 71.4% respectively. Pharmacological studies reveal that EELN could inhibit the growth of Sarcoma 180 tumor and increase the indices of thymus and spleen to improve the immune system remarkably in vivo. Results indicated that the bromophenol derivatives and EELN can be used as potent antitumor agents for PTK over-expression of c-kit and considered in a new therapeutic strategy for treatment of cancer.

Synthesis, Characterization, and Study of PLGA Copolymer <i>in Vitro</i>Degradation

The poly(lactic-co-glycolic acid), known as PLGA, is one of the main bioreabsorbable polymers used in the field of medicine today. This copolymer is widely applied in sutures, devices geared toward the controlled release of medication, and the guided regeneration of bone tissue as it presents a short degradation time. This work aimed to synthesize the 82/18 PLGA (expressed by the mass ratio of D,L-lactide and glycolide, respectively), to characterize and study the in Vitro degradation in the form of rods in phosphate buffer solution (PBS). The copolymer was synthesized by opening the cyclic dimer rings of the monomers D,L-lactide and glycolide, in the presence of the tin octanoate initiator and of the lauryl alcohol co-initiator. The characterization of the copolymer and the follow-up of its in vitro degradation were studied using: Differential Scanning Calorimetry (DSC), Thermogravimetry (TG), Infrared Molecular Absorption Spectroscopy with Fourier Transform (FTIR), Rheometry, and Scanning Electron Microscopy (SEM). Through these characterization techniques, it was possible to obtain the glass transition temperature, thermal stability, chemical composition, morphology, and molar mass of both the synthesized and the degraded copolymer. The molar mass of the synthesized copolymer was, approximately, 106 g·mol-1. The degradation rate of PLGA significantly increased from the 19th to the 28th day in PBS. After 28 days in PBS, the glass transition temperature and the molar mass reduced from 45°C to 17°C and from 1.5 × 106 g·mol-1?to 7.5 × 104?g·mol-1, respectively. The pH of the medium has a significant influence on the copolymer degradation profile. When it diminishes, it accelerates the degradation process, resulting in smaller PLGA polymer chains. This pH dependent degradation can be useful for drug release systems.

Sustained release donepezil loaded PLGA microspheres for injection:Preparation,in vitro and in vivo study

The purpose of this study was to develop a PLGA microspheres-based donepezil(DP)formulation which was expected to sustain release of DP for one week with high encapsulation efficiency(EE).DP derived from donepezil hydrochloride was encapsulated in PLGA microspheres by the O/W emulsion-solvent evaporation method.The optimized formulation which avoided the crushing of microspheres during the preparation process was characterized in terms of particle size,morphology,drug loading and EE,physical state of DP in the matrix and in vitro and in vivo release behavior.DP microspheres were prepared successfully with average diameter of 30m,drug loading of 15.92±0.31%and EE up to 78.79±2.56%.Scanning electron microscope image showed it has integrated spherical shape with no drug crystal and porous on its surface.Differential scanning calorimetry and X-ray diffraction results suggested DP was in amorphous state or molecularly dispersed in microspheres.The Tg of PLGA was increased with the addition of DP.The release profile in vitro was characterized with slow but continuous release that lasted for about one week and fitted well with first-order model,which suggested the diffusion governing release mechanism.After single-dose administration of DP microspheres via subcutaneous injection in rats,the plasma concentration of DP reached peak concentration at 0.50 d,and then declined gradually,but was still detectable at 15 d.A good correlation between in vitro and in vivo data was obtained.The results suggest the potential use of DP microspheres for treatment of Alzheimer’s disease over long periods.

Effects of Sr addition on microstructure, mechanical properties and in vitro degradation behavior of as-extruded Zn-Sr binary alloys

The microstructures,mechanical properties and in vitro degradation behavior of as-extruded pure Zn and Zn-x Sr(x=0.1,0.4,0.8 wt.%)alloys were investigated systematically.For the microstructure and mechanical properties,Sr Zn13 phase was newly formed due to the addition of 0.1 wt.%Sr,improving the yield strength,ultimate tensile strength and elongation from(85.33±2.86)MPa,(106.00±1.41)MPa and(15.37±0.57)%for pure Zn to(107.67±2.05)MPa,(115.67±2.52)MPa and(20.80±2.19)%for Zn-0.1Sr,respectively.However,further increase of Sr content led to the deterioration of the mechanical properties due to the stress concentration and cracks initiation caused by the coarsening Sr Zn13 particles during tensile tests.For in vitro degradation,since micro galvanic corrosion was enhanced owing to the formation of the inhomogeneously distributed Sr Zn13 phase,the corrosion mode became non-uniform.Corrosion rate is gradually increased with the addition of Sr,which is increased from(11.45±2.02)μm/a(a=year)for pure Zn to(32.59±3.40)μm/a for Zn-0.8Sr.To sum up,the as-extruded Zn-0.1Sr alloy exhibited the best combination of mechanical properties and degradation behavior.

Application of custom anatomy-based nerve conduits on rabbit sciatic nerve defects: in vitro and in vivo evaluations

The intermingling of regenerated nerve fibers inside nerve grafts is the main reason for mismatched nerve fibers. This is one of the key factors affecting limb function recovery after nerve injury. Previous research has shown that the accuracy of axon regeneration can be improved by a bionic structural implant. To this aim, iodine and freeze-drying high-resolution micro-computed tomography was performed to visualize the 3D topography of the New Zealand rabbit sciatic nerve (25 mm). A series of 1-, 2-, 3-, and 4-custom anatomy-based nerve conduits (CANCs) were fabricated based on the anatomical structure of the nerve fascicle. The match index, luminal surface, and mechanical properties of CANCs were evaluated before implanting in a 10-mm gap of the sciatic nerve. Recovery was evaluated by histomorphometric analyses, electrophysiological study, gastrocnemius muscle weight recovery ratio, and behavioral assessments at 12 and 24 weeks postoperatively. The accuracy of nerve regeneration was determined by changes in fluorescence-labeled profile number during simultaneous retrograde tracing. Our results showed that the optimal preprocessing condition for high-resolution micro-computed tomography visualization was treatment of the sciatic nerve with 40% Lugol’s solution for 3 days followed by lyophilization for 2 days. In vitro experiments demonstrated that the match index was highest in the 3-CANC group, followed by the 2-, 1-, and 4-CANC groups. The luminal surface was lowest in the 1-CANC group. Mechanical properties (transverse compressive and bending properties) were higher in the 3- and 4-CANC groups than in the 1-CANC group. In vivo experiments demonstrated that the recovery (morphology of regenerated fibers, compound muscle action potential, gastrocnemius muscle weight recovery ratio, pain-related autotomy behaviors, and range of motion) in the 3-CANC group was superior to the other CANC groups, and achieved the same therapeutic effect as the autograft. The simultaneous retrograde tracing results showed that the percentages of double-labeled profiles of the 2-, 3-, and 4-CANC groups were comparatively lower than that of the 1-CANC group, which indicates that regenerated nerve fascicles were less intermingled in the 2-, 3-, and 4-CANC groups. These findings demonstrate that the visualization of the rabbit sciatic nerve can be achieved by iodine and freeze-drying high-resolution micro-computed tomography, and that this method can be used to design CANCs with different channels that are based on the anatomical structure of the nerve. Compared with the 1-CANC, 3-CANC had a higher match index and luminal surface, and improved the accuracy of nerve regeneration by limiting the intermingling of the regenerated fascicles. All procedures were approved by the Animal Care and Use Committee, Xinjiang Medical University, China on April 4, 2017 (ethics approval No. IACUC20170315-02).

Effects of Size and Surface Charge of Polymeric Nanoparticles on in Vitro and in Vivo Applications

Biodegradable polymeric materials are the most common carriers for use in drug delivery systems. With this trend, newer drug delivery systems using targeted and controlled release polymeric nanoparticles (NPs) are being developed to manipulate their navigation in complex in vivo environment. However, a clear understanding of the interactions between biological systems and these nanoparticulates is still unexplored. Different studies have been performed to correlate the physicochemical properties of polymeric NPs with the biological responses. Size and surface charge are the two fundamental physicochemical properties that provide a key direction to design an effective NP formulation. In this critical review, our goal is to provide a brief overview on the influences of size and surface charge of different polymeric NPs in vitro and to highlight the challenges involved with in vivo trials.

Protective effects of Ecklonia cava extract on the toxicity and oxidative stress induced by hair dye in in-vitro and in-vivo models

Oxidative hair dyes containingρ-phenylenediamine(PPD)are reported to induce an allergic reaction by promoting oxidative stress when absorbed through the skin.Despite the associated risk,these hair dyes remain popular owing to their convenience and sharpness of color.This makes it important to minimize the cytotoxicity and oxidative stress induced by PPD-containing hair dyes.Ecklonia cava extract has been evaluated in different studies for its protective effects against external stress in fibroblasts and keratinocytes.Our study was aimed at using in-vitro and in-vivo models to investigate the extract’s effects on cytotoxicity of and oxidative stress induced by PPD-containing hair dyes.Analysis of CIEL*a*b*Color space was first used to determine the range of E.cava extract that would not interfere with the coloring ability of the dye upon addition.Subsequently,the set ranges of E.cava extract(5% and 7%)were added to the hair dye and their toxicity assessed by evaluating the viability of fibroblasts and keratinocytes.The effects on developmental phenotypes and induction of oxidative stress by hair dye were evaluated and compared with those of hair dyes containing different contents of E.cava extract using an in-vivo zebrafish model.Our results showed that E.cava extract in hair dye could significantly decrease the cytotoxicity and levels of oxidative stress caused by hair dyes containing PPD in both in-vitro and in-vivo models.These results suggest that the addition of 7% E.cava extract to 250μg/mL hair dye does not interfere with the coloring ability of the dye while showing significant protective eff ects against the hair dye.The study proposes that the use of E.cava extract as an adduct to hair dyes containing PPD reduces the cytotoxicity and oxidative stress induced by these hair dyes.

Gan Shen Fu Fang ameliorates liver fibrosis in vitro and in vivo by inhibiting the inflammatory response and extracellular signalregulated kinase phosphorylation

BACKGROUND Liver fibrosis is a common health problem worldwide and there is still a lack of effective medicines.The Chinese herbal medicine,Gan Shen Fu Fang(GSFF)is composed of salvianolic acid B and diammonium glycyrrhizinate.In this study,we observed the effects of GSFF on liver fibrosis in vivo and in vitro in an attempt to provide some hope for the treatment.AIM To observe the effects of GSFF on liver fibrosis in vivo and in vitro and investigate the mechanism from the perspective of the inflammatory response and extracellular signal-regulated kinase(ERK)phosphorylation.METHODS Common bile duct-ligated rats were used for in vivo experiments.Hepatic stellate cells-T6(HSC-T6)cells were used for in vitro experiments.Hematoxylin and eosin staining and Masson staining,biochemical assays,hydroxyproline(Hyp)assays,enzyme-linked immunoasorbent assay and western blotting were performed to evaluate the degree of liver fibrosis,liver function,the inflammatory response and ERK phosphorylation.The CCK8 assay,immunofluorescence and western blotting were applied to test the effect of GSFF on HSC-T6 cell activation and determine whether GSFF had an effect on ERK phosphorylation in HSC-T6 cells.RESULTS GSFF improved liver function and inhibited liver fibrosis in common bile ductligated rats after 3 wk of treatment,as demonstrated by histological changes,hydroxyproline assays and collagen I concentrations.GSFF alleviated inflammatory cell infiltration and reduced the synthesis of pro-inflammatory cytokines[tumor necrosis factor-α(TNF-α)and interlukin-1β]and NF-κB.In addition,GSFF decreased ERK phosphorylation.In vitro,GSFF inhibited the viability of HSC-T6 cells with and without transforming growth factorβ1(TGF-β1)stimulation and decreased the synthesis of collagen I.GSFF had the greatest effect at a concentration of 0.5μmol/L.GSFF inhibited the expression ofα-smooth muscle actin(α-SMA),a marker of HSC activation,in HSC-T6 cells.Consistent with the in vivo results,GSFF also inhibited the phosphorylation of ERK and downregulated the expression of NF-κB.CONCLUSION GSFF inhibited liver fibrosis progression in vivo and HSC-T6 cell activation in vitro.These effects may be related to an alleviated inflammatory response and downregulated ERK phosphorylation.

Formation of Superoxide Radical and Hydrogen Peroxide Enhanced by Trinitrotoluene in Rat Liver, Brain, Kidney, and Testicle in Vitro and Monkey Liver in Vivo

Trinitrotoluene (TNT) increased the formation of adrenochrome from adrenaline and the formation of formaldehyde from methanol in rat liver mitochondria and microsomes in vitro as well as in monkey liver mitrochondria and microsomes in vivo. The effects were more prominent at higher TNT concentrations. These findings indicate that TNT enhances the production of superoxide radicals (O_2^-) and hydrogen peroxide (H_2O_2). The production of O_2^- was more prominent in systems containing added TNT than in those containing added benzyl viologen. H_2O_2 production by mitochondria was more pronounced in the liver than in other organs, but its production by microsomes was more pronounced in the brain than in other organs. The results suggest that TNT undergoes cycling reduction which produces oxidative stress. 1989 Academic Press, Inc.

Synthesis, Characterization and in vitro Degradation Properties of Poly(Propylene Fumarate-co-Propylene Sebacate) Networks

Poly（propylene fumarate-co-propylene sebacate） （P（PF-co-PS）） was crosslinked with Nvinyl pyrrolidone （N-VP） to form networks. It was investigated as biodegradable bone cement. In this paper, P（PF-co-PS） was synthesized and characterized by ^1H-NMR, FTIR and GPC. The effects of the amount of sebacate segments in P（PF-co-PS） main chains and the quantity of N-vinyl pyrrolidone on the in vitro degradation of the polymer networks were examined. Cylindrical specimens were submerged in phosphate buffered saline （PBS） at 37 ℃ and the pH value of PBS is 7.4 for 10 weeks. The gravimetry and compressive mechanical properties were tested over the degradation period. Networks formed by P（PF-oo-PS）8020/N-VP exhibited higher weight loss and better mechanical properties when compared with poly（propylene fumarate）/N-VP networks. The mechanical properties of P（PF-co-PS）/N-VP can be maintained for a very long time, even for 70 days, the yield strength, fracture strength and compressive modulus are （51.78 ± 2.01） MPa, （52.331 ± 1.84） MPa and （957.78 ± 24.40） MPa, respectively. The results demonstrate that the compressive mechanical properties and degradation velocity can be modulated by the amount of crosslinking agents and sebacate segments along the main chains of copolymers.