EFFECT OF COAL PYRITE SURFACE OXIDA-TION ON COAL DESULFURATION BY FLOTA-TION AND METHODS OF PYRITE DEPRESSION

This paper discusses the hydrophobicity of the pyrite surface under different extents of oxidation. Experimental results demonstrate that pyrite is floatable only under initial oxidation of its surf ace,while the fresh unoxidized or deeply oxidized surface of pyrite is hydrophilic. In the tests an organic reductant C6H3(OH)3 was chosen as the pyrite depressant. It is highly efficient ,and the sulfur in flotation can be significantly improved.

Fabrication of Silane and Desulfurization Ash Composite Modified Polyurethane and Its Interfacial Binding Mechanism

Polyurethane/desulfurization ash(PU/DA)composites were synthesized using"one-pot method",with the incorporation of a silane coupling agent(KH550)as a"molecular bridge"to facilitate the integration of DA as hard segments into the PU molecular chain.The effects of DA content(φ)on the mechanical properties,thermal stability,and hydrophobicity of PU,both before and after the addition of KH550,were thoroughly examined.The results of microscopic mechanism analysis confirmed that KH550 chemically modified the surface of DA,facilitating its incorporation into the polyurethane molecular chain,thereby significantly enhancing the compatibility and dispersion of DA within the PU matrix.When the mass fraction of modified DA(MDA)reached 12%,the mechanical properties,thermal stability,and hydrophobicity of the composites were substantially improved,with the tensile strength reaching 14.9 MPa,and the contact angle measuring 100.6°.

Few-layered hexagonal boron nitride nanosheets stabilized Pt NPs for oxidation promoted adsorptive desulfurization of fuel oil

A few-layered hexagonal boron nitride nanosheets stabilized platinum nanoparticles(Pt/h-BNNS)is engineered for oxidation-promoted adsorptive desulfurization(OPADS)of fuel oil.It was found that the few-layered structure and the defective sites of h-BNNS not only are beneficial to the stabilization of Pt NPs but also favor the adsorption of aromatic sulfides.By employing Pt/h-BNNS with a Pt loading amount of 1.19 wt%as the active adsorbent and air as an oxidant,a 98.0%sulfur removal over dibenzothiophene(DBT)is achieved along with a total conversion of the DBT to the corresponding sulfones(DBTO_(2)).Detailed experiments show that the excellent desulfurization activity originates from the few-layered structure of h-BNNS and the high catalytic activity of Pt NPs.In addition,the OPADS system with Pt/h-BNNS as the active adsorbent shows remarkable stability in desulfurization performance with the existence of different interferents such as olefin,and aromatic hydrocarbons.Besides,the Pt/h-BNNS can be recycled 12 times without a significant decrease in desulfurization performance.Also,a process flow diagram is proposed for deep desulfurization of fuel oil and recovery of high value-added products,which would promote the industrial application of such OPADS strategy.

Integration of Desulfurization and Lithium-Sulfur Batteries Enabled by Amino-Functionalized Porous Carbon Nanofibers

Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this issue with a double benefit.Herein,the amino-functionalized lotus root-like carbon nanofibers(NH_(2)-PLCNFs)are prepared by the amination of electrospinning carbon nanofibers under dielectric barrier discharge plasma.Selective catalytic oxidation of H_(2)S to elemental sulfur(S)is achieved over the metalfree NH_(2)-PLCNFs catalyst,and the obtained composite S@NH_(2)-PLCNFs is further used as cathode in LSBs.NH_(2)-PLCNFs enable efficient desulfurization(removal capacity as high as 3.46 g H_(2)S g^(−1) catalyst)and strongly covalent stabilization of S on modified carbon nanofibers.LSBs equipped with S@NH_(2)-PLCNFs deliver a high specific capacity of 705.8 mA h g^(−1) at 1 C after 1000 cycles based on the spatial confinement and the covalent stabilization of electroactive materials on amino-functionalized porous carbon matrix.It is revealed that S@NH_(2)-PLCNFs obtained by this kind of chemical vapor deposition leads to a more homogeneous S distribution and superior electrochemical performance to the sample S/NH_(2)-PLCNF-M prepared by the traditional molten infusion.This work opens a new avenue for the combination of environment protection and energy storage.

Facile synthesis of efficient pentaethylenehexamine-phosphotungstic acid heterogeneous catalysts for oxidative desulfurization

The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be the most promising technology.The facile synthesis of highly efficient and stable HPW-based heterogeneous catalysts for oxidative desulfurization is still a challenging task.In this paper,pentamethylene hexamine(PEHA)and phosphotungstic acid(HPW)were combined by a simple one-step method to prepare a heterogeneous catalyst of PEHA-HPW for the production of ultra-deep desulfurization fuel oil.The composite material exhibited excellent catalytic activity and high recyclability,which could reach a 100% dibenzothiophene(DBT)removal rate in 30 min and be recycled at least 5 times.Experiments and DFT simulations were used to better examine the ODS mechanism of PEHA-HPW.It was proved that the rich amino groups on the surface of PEHA-HPW play a crucial role.This work provides a simple and feasible way for the manufacture of efficient HPW-based catalysts.

Progress in research of process intensification of spouted beds:A comprehensive review

The development of intensification technology for spouted beds has become a current research focus,and an effective way to improve the efficiency of spouted beds is to reform their structure.Although numerous studies have been conducted on conventional beds,there are few reviews on the comprehensive application of intensification technology for spouted beds.In this paper,we comprehensively review the role of intensification technology in spouted beds for use in hydrodynamics,drying,desulfurization,pyrolysis,coating,biomass and waste gasification,and biomass drying from the perspective of experiment and simulation.Finally,potential problems and challenges in current spouted-bed research are summarized.

Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor

In the reaction process of carbonate desulfurization lead paste,the produced PbCO_(3) is easily wrapped in the outer periphery of PbSO_(4) to form a product layer,hindering the mass transfer process.Therefore,it is necessary to break the PbCO_(3) product layer.In this work,the rotor stator-reinforced reactor was selected as the enhanced desulfurization reactor for the purpose of breaking the PbCO_(3) product layer and promoting mass transfer.The breakage process of the PbCO_(3) product layer generated during the PbSO_(4) desulfurization was modeled.Computational fluid dynamics simulation to the rotation conditions was carried out to theoretically analyze the fluid flow characteristics of PbSO_(4) slurry and the wall shear stress affecting the breakage of PbCO_(3) product layer.By optimizing the rotation conditions,the distribution ratio of effective rotor wall shear stress range achieved 96.1%,and the stator wall shear stress range reached 99.15%under a rotation of 2000 r·min^(-1).The research work provides a reference for analysis of the mechanism of product layer breakage in the PbSO_(4) desulfurization process,and gives a clear and intuitive systematic study on the fluid flow characteristics and wall shear stress of the desulfurization reactor.

Encapsulation of ionic liquid, phosphotungstic acid inside the nanocages of MIL-101(Cr): Effective and reusable catalyst for efficient solvent-free oxidative desulfurization from fuel oil

Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performance.Successful encapsulation of phosphotungstic acid(HPW)and ionic liquid(BMImBr)inside the mesoporous cages of MIL-101(Cr)was accomplished through a combination of“bottle around ship”and“ship in bottle”methods.The obtained BMImPW@MIL-101(Cr)composite was characterized by XRD,FTIR,BET,SEM,XPS and ICP methods.Results indicated that the BMImPW@MIL-101(Cr)composites with PW^(3−) loading of 23.1–50.7 wt%were obtained,demonstrating that the“bottle around ship”method is beneficial to make full use of nanocages of MIL-101(Cr)to obtain expected high loading of active PW^(3−) .The BMImPW@MIL-101(Cr)exhibits excellent reusability with no evidence of leaching of active PW^(3−) and BMIm^(+),and well-preserved structure after successive cycles of regeneration and reuse.The significantly improved stability of BMImPW@MIL-101(Cr)as compared to HPW@MIL-101(Cr)is possibly because the leaching of the active PW^(3−) −sites can be greatly suppressed by forming large size of BMImPW owing to introduction of BMIm^(+)cation.The BMImPW@MIL-101(Cr)exhibited excellent catalytic activity for solvent free oxidative desulfurization of refractory sulfides.The enhanced oxidative desulfurization activity as compared to HPW@MIL-101(Cr)can be explained by the intimate contact of sulfides with active PW^(3−) sites owing the strong attraction of BMIm^(+)cation with the sulfides.

Titanium-rich TS-1 zeolite for highly efficient oxidative desulfurization

The exploration of highly efficient catalysts based on nano-sized Ti-rich titanosilicate zeolites with controllable active titanium species is of great importance in zeolite catalytic reactions.Herein,we reported an efficient and facile synthesis of nano-sized Ti-rich TS-1(MFI)zeolites by replacing tetrabutyl orthotitanate(TBOT)with tetrabutyl orthotitanate tetramer(TBOT-tetramer)as the titanium source.The introduced TBOT-tetramer slowed down the zeolite crystallization process,and accordingly balanced the rate of incorporating Ti and the crystal growth and inhibited the massive formation of anatase species.Notably,the prepared Ti-rich TS-1 zeolite sample had a Si/Ti as low as 27.6 in contrast to conventional one with a molar ratio of 40.The TBOT-tetramer endowed the titanosilicate zeolites with enriched active titanium species and enlarged external surface area.It also impeded the formation of anatase species,resulting in superior catalytic behavior toward the oxidative desulfurization of dibenzothiophene compared with the conventional TS-1 zeolite counterpart prepared with TBOT.

Design and Development of Highly Efficient Ni/ZnO Catalysts Based on Semiconductor Metal Oxide Catalysis Theory

In the context of reactive adsorption desulfurization,the development of an efficient Ni/ZnO desulfurizer has attracted increasing attention.In the work reported here,a novel Ni/Mn-ZnO composite nanowire desulfurizer is designed on the basis of the catalytic theory of semiconductor metal oxides and the characteristics of one-dimensional nanomaterials.X-ray diffraction,scanning electron microscopy,N_(2) adsorption-desorption,and X-ray photoemission spectroscopy demonstrate that Mn doping changes the crystal structure and morphology of the Ni/ZnO desulfurizer,increases the number of quasi-free electrons in the ZnO,and promotes H_(2)S adsorption.The Ni/Mn-ZnO composite nanowire desulfurizer exhibits good desulfurization performance when used with gasoline as the raw material.

New insights into the mechanism of reactive adsorption desulfurization on Ni/ZnO catalysts:Theoretical evidence showing the existence of interfacial sulfur transfer pathway and the essential role of hydrogen

As well known in the petroleum industry and academia,Ni/ZnO catalysts have excellent desulfurization performance.However,the sulfur transfer mechanism of reactive adsorption desulfurization(RADS)that occurs on Ni/ZnO catalysts remains controversial.Herein,a periodic Ni nanorod supported on ZnO slab was built to represent the Ni/ZnO system,and density functional theory calculations were performed to study the sulfur transfer process and the role of H_(2)within the process.The results elucidate that the direct solid-state diffusion of S from Ni to interfacial oxygen vacancies(Ov)is more favorable than the hydrogenation of S to SH/H_(2)S on Ni and the subsequent H_(2)S desorption,and accordingly,H_(2)O is produced on Ni rather than on ZnO.Ab initio thermodynamics analysis shows that the hydrogen atmosphere applied in preparing Ni/ZnO catalysts greatly promotes the O_(v)formation on ZnO surface,which accounts for the presence of interfacial O_(v)in freshly prepared catalysts.Under RADS condition,hydrogenation of interfacial O atoms to form O-H groups facilitates the reverse spillover of these lattice O atoms from ZnO to Ni,accompanied with the interfacial O_(v)generation.In contrast to the classic S transfer mechanism via H_(2)S,the present work clearly demonstrates that the interfacial S transfer is a feasible reaction pathway in the RADS mechanism.More importantly,the existence of interfacial O_(v)is an essential prerequisite for this interfacial S diffusion,and H_(2)plays a key role in facilitating the O_(v)formation.

Fabrication of adsorbents with enhanced CuⅠ stability: Creating a superhydrophobic microenvironment through grafting octadecylamine

In atmospheric conditions, CuⅠis easily oxidized to CuⅡdue to the coexistence of moisture and oxygen.The poor oxidation inhibition of CuⅠrestricts the practical application of CuⅠ-containing materials.Herein we introduce an approach to construct a superhydrophobic microenvironment in CuⅠfunctionalized metal–organic frameworks by coordinatedly grafting organic amine compounds onto open metal sites(OMSs), which can hinder the accessibility of moisture to pores thereby enhancing the stability of CuⅠ. As a proof of concept, MIL-101(Cr) with abundant OMSs and octadecylamine(OA)with long hydrophobic alkyl groups are used as carrier and surface coating. As superhydrophobic porous materials, the resultant CuⅠM-OA exhibits improved CuⅠstability in addition to retaining high crystallinity and intact porosity while almost all CuⅠis oxidized in hydrophilic CuⅠM upon exposure in a humid atmosphere for 30 h. CuⅠM-OA owns excellent adsorption desulfurization performance(ADS) with regard to thiophene, benzothiophene, and 4,6-dimethyl dibenzothiophene. Even from hydrated fuel, the adsorption performance of CuⅠM-OA maintains well while the adsorption capacity of CuⅠM decreases to 7% after4 cycles. The remarkable moisture resistance, CuⅠstability, and high porosity make the current adsorbent CuⅠM-OA highly promising for the practical ADS process.

Study on the in situ desulfurization and viscosity reduction of heavy oil over MoO_(3)–ZrO_(2)/HZSM-5 catalyst

Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.

Efficient Absorptive Oxidation of H_(2)S Using a Fe(Ⅲ)-Cu(Ⅱ) Coupled DES (ChCl/EG) Desulfurizer

In this experiment,an EG/ChCl deep eutectic solvent(DES)was synthesized using choline chloride(ChCl)and ethylene glycol(EG)as the raw materials.The synthesized DES was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.The results demonstrate the successful synthesis of DES.A certain amount of FeCl_(3) and CuSO_(4) was added to the DES to promote the absorption of H_(2)S;thus,a Fe(Ⅲ)-Cu(Ⅱ)coupled DES desulfurization system was obtained.The effects of DES raw materials’ratio,FeCl_(3) concentration,water content,CuSO_(4) concentration,and reaction temperature on the desulfurization efficiency and the regeneration conditions were studied.The results show that ChCl/EG DES with a molar ratio of 1:2 has a better desulfurization effect,and the addition of an appropriate amount of water can effectively promote the dissolution of CuSO_(4) and the absorption of H_(2)S.An appropriate increase in reaction temperature and CuSO_(4) concentration would also promote the absorption of H_(2)S.When the concentration of CuSO_(4) in DES desulfurizer was 0.15 mol/L,the gas speed was 20 mL/min,and the sulfur capacity could reach 10.23 g/L.The desulfurizer could be regenerated by passing O_(2),and the desulfurization efficiency did not change much after repeated use of desulfurization-regeneration many times.The desulfurization product was characterized by XRD as rhombohedral sulfur.

Fluoride Ion Adsorption Effect and Adsorption Mechanism of Self-Supported Adsorbent Materials Based on Desulfurization Gypsum-Aluminate Cement

The adsorption method has the advantages of low cost,high efficiency,and environmental friendliness in treating fluorinated wastewater,and the adsorbent material is the key.This study combines the inherent anion-exchange adsorption properties of layered double hydroxides(LDHs).Self-supported porous adsorbent materials loaded with AFm and AFt were prepared from a composite cementitious system consisting of calcium aluminate cement(CAC)and flue gas desulfurization gypsum(FGDG)by chemical foaming technique.The mineral composition of the adsorbent material was characterized by X-ray diffraction(XRD)and Scanning electron microscopy(SEM).Through the static adsorption experiment,the adsorption effect of the mineral composition of the adsorbent on fluoride ions was deeply analyzed,and the adsorption mechanism was revealed.XRD and SEM showed that the main hydration phases of the composite cementitious system consisting of CAC and FGDG are AFm,AFt,AH_(3),and CaSO_(4)·2H_(2)O.FGDG accelerates the hydration process of CAC and inhibits the transformation of AFt to AFm.The AFt content increased,and the AFm content decreased or even disappeared as the amount of FGDG increased.Static adsorption experiment results showed that AFm and AFt in adsorbent materials could significantly enhance the adsorption of fluoride ions.The adsorption of F^(−)in aqueous solution by PAG tends more towards monolayer adsorption with a theoretical maximum capacity of 108.70 mg/g and is similar to the measured value of 112.77 mg/g.

C_(9)H_(10)O_(2):0.5ZnCl_(2)/SG as a High-Efficiency Catalyst for Desulfurization of Model Oil

A C_(9)H_(10)O_(2):0.5ZnCl_(2)/SG catalyst was synthesized using a one-step sol-gel method with silica gel(SG)as the carrier and C_(9)H_(10)O_(2):0.5ZnCl_(2)deep eutectic solvent(DES)as active component.The structure of the supported catalyst was characterized by FT-IR,XRD,SEM,and N2 adsorption-desorption,and the DES was found to have successfully permeated the SG through its pores.The removal of dibenzothiophene(DBT)in model diesel was studied using C_(9)H_(10)O_(2):0.5ZnCl_(2)/SG as a catalyst and H_(2)O_(2)as an oxidant.The influence of loading dose of DES,reaction temperature,catalyst dosage,O/S molar ratio,and sulfide type on the desulfurization rate was investigated.The removal rates of DBT,4,6-dimethyldibenzothiophene(4,6-DMDBT),and benzothiophene(BT)under optimal reaction conditions were 99.4%,96%,and 78.2%,respectively.C_(9)H_(10)O_(2):0.5ZnCl_(2)/SG catalyst could be recycled five times with a little decrease of oxidative desulfurization activity,and the adsorption-oxidation desulfurization mechanism was examined.

Simultaneous desulfurization and denitrification of sintering flue gas via composite absorbent

Experiments on simultaneous absorption of SO_2 and NO_X from sintering flue gas via a composite absorbent NaClO_2/NaClO were carried out. The effects of various operating parameters such as NaClO_2 concentration(ms), NaClO concentration(mp), molar ratio of NaClO_2/NaClO(M), solution temperature(TR), initial solution pH, gas flow(Vg) and inlet concentration of SO_2(CS) and NO(CN) on the removal efficiencies of SO_2 and NO were discussed. The optimal experimental conditions were determined to be initial solution pH = 6, TR=55 °C and M = 1.3 under which the average efficiencies of desulfurization and denitrification could reach99.7% and 90.8%, respectively. Moreover, according to the analysis of reaction products, it was found that adding NaClO to NaClO_2 aqueous solution is favorable for the generation of ClO_2 and Cl_2 which have significant effect on desulfurization and denitrification. Finally, engineering experiments were performed and obtained good results demonstrating that this method is practicable and promising.

THE APPLICATION OF THE LAW OF MASS ACTION IN COMBINATION WITH THE COEXISTENCE THEORY OF SLAG STRUCTURE TO THE MULTICOMPONENT SLAG SYSTEMS

It is shown by the the law of mass action in combination with the coexistence theory of slag structure that KMn n =NMno /(NFeo [%Mn] does not change with basicities and maintains constant at constant temperature; the oxidizing capabilities of multicomponent slag systems containing CaO, MgO etc., can be expressed by NFe tO =NFeO + 6NFe2 O3 + 8NFe3O4; the desulfurizing capabilities of various basic oxides for multicomponent slag systems can be calculated by Ls=8(KCaSNCaO+KMgsNMgo +KFeSNFeO)∑n/[%O]; the dephosphorizing capabili- ties of CaO-MgO-FeO-FeO O3-P2 O5 as well as CaO-FeO-Fe2 O3-A12 O3-P2 O5 molten slags expressed respectively by Lpo=(%P2O5)/[P]2 = 141.94[%O]5∑nK00(1 + K5N2Cao + K6N3CaO + K7N4CaO + K8N2MgO + K9N3MgO + K10N3FeO + K11N4Feo); LPO=(%P2O5)/[P]2= 141.94[%O]5∑nK00(1 + K10N2CaO+ K11N3CaO+ K12N4CaO + K13N3FeO + K14N4FeO) have good agreement with practical values.

硅胶催化双氧水甲酸氧化噻吩类化合物的研究

Thiophene (C4H4S) and 3-methylthiophene(3-MC4H4S) are typical thiophenenic sulfur compounds that exist in fluid catalytic cracking (FCC) gasoline. Oxidation of C4H4S and 3-MC4H4S were conducted in hydrogen peroxide (H2O2) and formic acid system over a series of silica gel loaded with metal oxide. The silica gel loaded with copper and cobalt (1:1) oxide was found very active for the model compound oxidation using H2O2/formic acid, while the silica gel unloaded with metal oxide was less active. The sulfur removal rate of thiophenes was different as solvent was changed. And the conversation of C4H4S and 3-MC4H4S was improved at higher temperature,but reduced when olefin was added. The sulfur removal rate of model sulfur compounds was enhanced when the phase transfer catalyst emulsifier polyethylene glycol octyl phenyl ether or tetrabutylammonium bromide(TBAB)in a H2O2 and formic acid system with the addition of TBAB, a bromine substitution trend appeared in the oxidation of thiophenes, suggesting the influence of TBAB.

Progress of the technique of coal microwave desulfurization

With the advantages of its fast speed,effective and moderate controllable conditions,desulfurization of coal by microwave has become research focus in the field of clean coal technology.Coal is a homogeneous mixture which consists of various components with different dielectric properties,so their abilities to absorb microwaves are different,and the sulfur-containing components are better absorbers of microwave,which makes them can be selectively heated and reacted under microwave irradiation.There still remain controversies on the principle of microwave desulfurization at present,thermal effects or non-thermal effects.The point of thermal effects of microwave is mainly base on its characters of rapidly and selectly heating.While,in view of non-thermal effect,direct interactions between the microwave electromagnetic field and sulfur containing components are proposed.It is a fundamental problem to determine the dielectric properties of coal and the sulfur-containing components to reveal the interaction of microwave and sulfur-containing compounds.However,the test of dielectric property of coal is affected by many factors,which makes it difficult to measure dielectric properties accurately.In order to achieve better desulfurization effect,the researchers employ methods of adding chemical additives such as acid,alkali,oxidant,reductant,or changing the reaction atmosphere,or combining with other methods such as magnetic separation,ultrasonic and microorganism.Researchers in this field have also put forward several processes,and have obtained a number of patents.Obscurity of microwave desulfurization mechanism,uncertainties in qualitative and quantitative analysis of sulfur-containing functional groups in coal,and the lack of special microwave equipment have limited further development of microwave desulfurization technology.